MP/DP + SCCM clients in DMZ

Hi,
I have this MP/DP in DMZ. Firewall openings are documented inedeed here
https://technet.microsoft.com/en-us/library/hh427328.aspx?f=255&MSPPError=-2147217396 but I'd need some extra info.
The MP/DP: to which site server do you point the SCCM client on this server (to itself or to the "main" site server)
=> if to itself, this would also mean the clients in DMZ point to to the DMZ MP/DP and won't need any firewall openings, iow is there still communication needed from sccm clients to "main" site server or does everything go to MP/DP in DMZ?
Please advise.
J.
Please see
https://social.technet.microsoft.com/Forums/systemcenter/en-US/6cbc9ab0-3e4e-4f14-a14d-a7d3f1c17cfc/install-sccm-client-to-server-in-dmz-mp-does-not-exist?forum=configmanagergeneral for more backgroundinfo on this question.
Note: firewall ports to open:
*DP => MP: TCP 80 and 443
*MP => SQL: TCp 1433
*site server <=> certificate registration point (sccm "main" server?) TCP 445 and 135, UDP 135
*SUP => Internet: TCP 80
Jan Hoedt

The MP/DP will need an sccm client.
No. Wrong assumption. Not needed from a ConfigMgr point of view (but required if you want to patch those systems and get inventory etc)
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

Installation sccm client on workgroup client in DMZ

Hi Guys,
i tried to install the sccm client on workgroup clients in a DMZ environment.
First I created a client certifikate for the workgroup client on the sccm server and installed the certifikate on the workgroup computer with certutil.exe.
commandline for installation:
ccmsetup.exe /usePKICert /NOCRLCheck SMSMP=servername.bla.com SMSSITECODE=BLA
i get this errors in the ccmsetup.log:
Unexpected row count (0) retrieved from AD.
Failed to get site version from AD with error 0x80004005
thanks for your support,
Chris

Refer these Pls
http://eskonr.com/2013/08/sccm-configmgr-2012-manage-workgroup-computers-for-deploymentremote-tools-etc/ (An Excellent article)
Client installation in DMZ step by step :
http://myitforum.com/cs2/blogs/cstauffer/archive/2009/02/06/sccm-client-install-in-a-dmz.aspx
http://blogs.technet.com/b/keithmayer/archive/2012/07/30/planning-system-center-configuration-manager-across-dmz-and-protected-subnets-sysctr-configmgr.aspx
http://nikifoster.wordpress.com/2011/01/31/installing-configmgr-clients-on-servers-in-a-dmz/
Thanks, Prabha G

Install SCCM client to server in DMZ: "MP does not exist"

Hi,
I’d need to put a management point/distribution point in a DMZ.
Therefore I wanted to make sure this MP/DP works before I move it to this DMZ and I:
*configured a Windows 2012 R2, (name: “DMZ01”) server with the prereqs*removed this server DMZ01 from the actual domain*added a DNS entry from DMZ to which I can connect successfully
*added a network access account in order to push the sccm client
*added correct boundary group
Now when I try to deploy an SCCM client to it, I get a failure in the ccmsetup log saying MP does not exist:
Failed to load mdmregistration.dll with error 0x8007007e
ccmsetup
27/04/2015 10:54:48       932 (0x03A4)
Failed to load mdmregistration.dll. Continue deployment.
ccmsetup
27/04/2015 10:54:48       932 (0x03A4)
An MP does not exist on this machine. ccmsetup
27/04/2015 10:54:48       932 (0x03A4)
My questions:
*should I use the management point affinity here to force finding the management point?
*what about the domain certificate (that’s gone now since it isn’t domain joined anymore)? How to deal with this/revive this?
Please advise.
J.
Jan Hoedt

Ok, thanks.
Note: there is no trust between the DMZ domain and the domain in which the "main" sccm server exists.
What are the options there? F.e. could we use Mutual authentication just as with a Mac
https://technet.microsoft.com/en-us/library/jj591553.aspx#BKMK_ManualCertifcateInstallation
Jan Hoedt

Manage SCCM 2012 clients in DMZ (OS Deploy, Windows updates) via DP/MP

Hi,
We ’d like to manage (=OS Deploy, Packages,Windows updates) Windows clients (Windows 2008/2012 R2 servers for now, about 20 of them) in a DMZ (= different domain).
There is this article
https://nikifoster.wordpress.com/2011/01/31/installing-configmgr-clients-on-servers-in-a-dmz/ which explains what to do … in 2011. Since then lots of things are changed I guess
Before I dive in, I’d need to have an overview + do some administrative tasks (like asking for firewall accesses).
Current setup DMZ:
Our SCCM 2012 R2 server is on a Windows 2008 R2 OS
Client communication is done via HTTP (not HTTPS)
An extra physical Distribution point is setup (only DP, nothing more) in our current domain
A new Windows 2012 server is setup in the DMZ which should host the DP and probably management point (since it should manage the clients over there)
There are clients in DMZ that are currenlty managed by SCCM 2007 but
this server will be phased out, these client have:
Correct sccm functionality
Correct DNS resolution
My steps/questions, please comment:
Add the DMZ ip range to SCCM 2012 boundary as “DMZ”
Add the network access account to be able to deploy as well clients as distribution point in DMZ
In the DMZ accesses on firewall for server VLAN have to be asked
When we have a distribution point and communication is “HTTP only” then http (port 80) from DMZ to sccm server should suffice, correct? Or are
extra firewall openings needed for management point access/packages and windows updates sync?
Now the sccm clients will be deployed to the servers in DMZ: deploy SCCM clients to hosts in DMZ, how this should be done: we connect a console to the SCCM-server in the DMZ then deploy the discovered clients?
OS Deploy should be made available, but no dhcp is available in DMZ and it is not an option either, therefore we would boot from an ISO then enter an ip (or pre-enter it so there is already filled in an ip?). So tasksequences/deployments
for servers in DMZ, where are they configured/deployed then? Via console access on DMZ management point or can we deploy on our domain SCCM management point (not in DMZ) and it will be synced to the DMZ management point? Not clear
Selective sync of software to this distribution point (howto? not sure), we don’t need any Windows 8 software/drivers to be synced.
Thanks for your input!
J.
Jan Hoedt

No comment;
I think you mean the client push installation account and the site system installation account;
More ports are required, see site server > distribution point and distribution point > management point from the provided link;
The console will always be connected to your primary site server. The client will be pushed from the primary site server and it will provide the initial files. The other files will be downloaded from the local distribution point;
The task sequence deployment will be just like a normal taks sequence deployment. The only difference is the location of the server;
Only the content that's distributed to the distribution point in the DMZ will be available on that distribution point.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCEP definition updates for clients in DMZ via UNC is not working.

Hello,
I have configured SCEP definition updates via UNC method for my Win 8.1 clients in DMZ and its not working.
Script is properly associated with task scheduler and downloading definition to shared folder properly.
Even running the mpcmdrun.exe -SignatureUpdate, gives the below error:
C:\Program Files\Microsoft Security Client>mpcmdrun.exe -SignatureUpdate
Signature update started . . .
ERROR: Signature Update failed with hr=80070002
CmdTool: Failed with hr = 0x80070002.
MpCmdRun: Command Line: mpcmdrun.exe -SignatureUpdate
Start Time: ‎Sun ‎Jul ‎06 ‎2014 11:05:09
Start: MpSignatureUpdate()
Update started
Search Started (UNC share) (Path: \\sccm\SCEP_UNC_DEFS\Updates\x64)...
Search Completed
Download Started...
Download Completed
Installation Started...
Installation Completed
Update completed with hr: 0x80070002
ERROR: Signature Update failed with hr=80070002
MpCmdRun: End Time: ‎Sun ‎Jul ‎06 ‎2014 11:05:17

Hi,
Please check logs on the client to see whether there are any helpful information.(ScanAgent.log, Windowsupdate.log and UpdatesHandler.log)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problem installing SCCM client in remote untrusted forest

Hi,
My configuration is :
My network is in two parts : intranet and a DMZ. In the DMZ there is another forest and domain. There is no trust between the forest in the DMZ and the internal network. I configured the remote forest in SCCM with a user account that has Domain Admin acces
in the DMZ forest/domain.
The primary site server is located in the internal part of my network. SQL is installed on a remote server. Management point, distribution point, Fallback Status Point roles are installed on the primary site server. SMS Provider is installed on the primary
site server.
In the DMZ part, I have a management point, distribution point installed on one server.
The forest discovery works fine. I can query AD in the remote forest (DMZ).
I have a problem installing the SCCM client on computers located in the remote forest with client push or with the command line.
CCMSETUP.EXE /MP:DMZ site server /DP:DMZ site server /FSP: primary site server SMSSITECODE:SIT
In CCMSetup.log I can see that the client try to communicate with my DMZ site server but it reverts to the management point and distribution point located in the internal part of the network. The installation fails and will try in 10 minutes.
Do anyone has seen this problem before? Am I missing something? Could it be a configuration issue?
Could you help me whit this please?
Thanks in advance for your time!
Jacques

Does the client installation work when you install the client manually on the untrusted domain client? What does the CCM.log say on the site server?
Have you double checked the firewall ports for the client push installation? The ports needed for the client push to work are as follows (from the site server to the client):
SMB - TCP 445
RPC Endpoint Mapper - TCP 135 / UDP 135
RPC Dynamic Ports
And to Management Point:
HTTP - TCP 80 (When using HTTP)
HTTPS - TCP 443 (When using HTTPS)
Also a quote from
TechNet: "In addition to the ports listed in the following table, client push installation also uses Internet Control Message Protocol (ICMP) echo request messages from the site server to the client computer to confirm whether the client
computer is available on the network. ICMP is sometimes referred to as TCP/IP ping commands. ICMP does not have a UDP or TCP protocol number, and so it is not listed in the following table. However, any intervening network devices, such as firewalls, must
permit ICMP traffic for client push installation to succeed."

SCEP definition updates for clients in DMZ

Hello,
I do want to enable SCEP definition updates for small group of clients in DMZ (apprx 30 -40)
I have created a separate AD OU and SCCM collection for such computers.
Google shows me different ways like using Definition Update Automation Tool, WSUS, scripts, shares etc, and I am quite confused for which way to adopt.
can any one suggest me which is the best automated way?
I do have SCCM 2012 sp1 and all win 8 cleints.
Thanks in Advance

You can use whathever method you prefer. All will most likely work. As there's already Configmgr in place I'd use it to do this job. ADRs (automatic deployment rules) can be used to automate this process.
Torsten Meringer | http://www.mssccmfaq.de

Managing Clients in DMZ

We have 30 servers in DMZ which we plan to manage with SCCM 2012 R2 for Endpoint Protection, Windows Updates
I have a SCCM 2012 Server installed in my internal (intranet) domain will all the roles installed in the same server and currently using this for updating Microsoft Security patch updates to the all the 1500 SCCM clients in the internal domain.
We are in process of transitioning to HTTPS communications using PKI certificates.
I am trying to come up with a solution on how I can use the same SCCM 2012 R2 server to update security patches and reporting in the 30 DMZ machines that is in the different domain and has firewall rules setup.
I did go through the entire posted forum but could not come up with the exact list of tasks that I need to do in order to archive this.
Here are my questions?
1. With the current SCCM 2012 R2 intranet Server , can I extend and mange clients in the separate DMZ domain?
2. What SCCM 2012 R2 roles are required to install in the DMZ domain?
3. What is the best way I can install SCCM client in the DMZ?
4. What other configuration is required in the DMZ domain in order to communicate with the SCCM Server in the intranet?
5. What configuration is required in the SCCM Server in the intranet domain?
6. What ports needs to be open between the DMZ client and the SCCM Server in the intranet domain for Security updates and Central Site reporting?

You should take a look at this blog post. It's really useful:
http://blogs.technet.com/b/manageabilityguys/archive/2012/09/05/system-center-2012-configuration-manager-and-untrusted-forests.aspx

Sccm client v4 wont install and install client v5 - SCCM 2012 R2

Hi, I am coming to the end of a SCCM 2012 R2 client deployment. I have come across 2 machines (so far)that have the SCCM 2007 (v4) client installed, and although the task is set to uninstall from the server the v5 client will not installed. iI have been
using this an as template:
http://eskonr.com/2010/11/sccm-client-installation-troubleshooting-steps-check-list/
I have ran the install seperatelty from the server (boxed ticked - Uninstall existing Config Manager client) - No Install
The ccmsetup folder is created - c$\Windows\ccmsetup, but only has 3 files, no logs folder
Other machines on site has the v5 client
Checked ping from client to server and vice versa (no firewall enabled)
Boundaries/Schema/DNS - ok
Checked all local event logs.
i know you can run the local uninstall command, but as the network is vast i would like to fix to come from the server, rather than having to do this on the client.
Any tips would be great going forward.
SCCM 2012 R2 - Windows 7 Enterprise SP1

Hi,
I ensured the account used for the install was in the local admins group.
From the ccm.log on the server, i got these erros, been googling but nothing yet:
---> ERROR: Unable to start service "ccmsetup" on machine "LCD12121", error = 1075.   SMS_CLIENT_CONFIG_MANAGER   22/10/2014 12:01:43   1460 (0x05B4)
---> Failed to install CCM Client Bootstrap component on client (1075)   SMS_CLIENT_CONFIG_MANAGER   22/10/2014 12:01:43   1460 (0x05B4)
Execute query exec [sp_CP_SetLastErrorCode] 2097153910, 1075   SMS_CLIENT_CONFIG_MANAGER   22/10/2014 12:01:43   1460 (0x05B4)
Also, is there a way to run a report on which machines dont have the sccm client/install issues?
Thanks

PKI SCCM Client Certificate Template not viewable by Windows 7 and Server 2008 workgroup machines.

Hello everyone,
I’m having issues with workgroup computers, not domain systems when I request a certificate.
It’s extremely weird. It has something to do with Windows 7 and Windows 2008 machines. In 2003 server I can request a certificate manually with certutil and it see the certificate template. I copy over the exact command
on windows 7 and it can’t see the certificate template.
I have the following configuration:
CA Enterprise
I have created the SCCM Client Certificate
I have created the SCCM Web Server Certificate
I have created the SCCM Distribution Point Certificate
GPO is configured
SCCM 2012 R2 CU2 configured to do HTTP and HTTPS
Installed SCCM Client Certificate
Installed SCCM Web Server Certificate
Installed Distribution Point Certificate
Deployed to a domain computer good on PKI
Workgroup Computers:
I’m having issues with deploying certificates
Windows 7 –
(ERROR) not successful
Windows Server 2008 R2 –
(ERROR) not successful
Windows Server 2003 - successful
Windows XP – successful
How I’m getting the certs for the clients is by utilizing the following scripts from this URL.
http://www.ithierarchy.com/ITH/node/48
I did find a couple of errors in the code, but if it’s working on my Server 2003, then it should work on the others. Windows 7 and Windows 2008 R2 seem to have the same issue. The error I’m getting is the following:
Command line requesting the cert ---- CertReq –new –f testcomputer.home.pvt.inf c:\client\testcomputer.home.pvt.req
Error --- Template not found.
SCCMClientCertificate (this is my template)

Just to give an update on what’s happening with this. I found out this format is unsupported by MS with Windows Vista and newer OS’s.
Instead you must utilize two other additional roles on the CA to have this work. The caviate is, I’m down to the testing and it’s not working as in the document. I have MS Support
working with me to resolve this issue since it was written by MSFT.
http://blogs.technet.com/b/askds/archive/2010/05/25/enabling-cep-and-ces-for-enrolling-non-domain-joined-computers-for-certificates.aspx
and use this doc for similar workgroup computers for rolling out certs. This was written for RT devices, however, it should work once I get to that point.
http://blogs.technet.com/b/pki/archive/2012/12/11/certificate-for-winrt-devices-and-non-domain-member-devices.aspx

SCCM Task Sequence no longer installs SCCM Client

I am using SCCM 2007 R3 with SP2 and MDT 2010
My task sequences were all working fine until one of the other SCCM admins "Synced all sites" by transferring the site settings of one site to all the other sites. How this broke OSD I don't know.
At this point the best I can tell is that the SCCM client is not being installed in the Task Sequence and so when it reboots to the installed OS there is no longer any communication and the task sequence fails with an error of "Windows could not configure
one or more system components. To install Windows, restart the computer and then restart the installation.
I have run out of ideas to fix it so I am asking for the collective knowledge of the Interwebs for help.

Please post the contents of C:\Windows\ccmsetup\logs\ccmsetup.log in order for us to help you further
Blog: www.danielclasson.com/blog |
LinkedIn:
Daniel Classon | Twitter: @danielclasson

SCCM Client on Site Server from Different Site within Same Domain

Our desktop team has a site to manage desktops.
We have a site to manage servers.
Do you see any issue with the Server site managing the Desktop teams servers as their clients?
In other words, desktop wants us to patch and manage their SCCM servers with our site. Placing the SCCM client on their servers pointing to our site.
Thanks for any gotchas!

Are you talking about different (standalone primary ConfigMgr) sites (e.g. site abc is used for managing desktops and xyz for servers)? And now you want to assign the ConfigMgr clients (on servers used in site xyz) to site abc? This does work, but I am not
sure if it is supported.
Torsten Meringer | http://www.mssccmfaq.de

Need help with a simple Rename/Join Domain/Install SCCM Client Task Sequence

Good morning everyone,
I need to create a very simple task sequence that will run an .exe that we have created that renames the computer based on a prefix-serialnumber...then restarts, adds it to our domain, restarts, and then installs the SCCM client.
1) run rename program
2) join to domain
3) install sccm client
Can someone help me with the steps that will be required for this?
Thank you very much!
**note, these will not be formatted/have an OS installation ran on it with this task sequence. The situation is that we are receiving 400+ custom configured laptops, and we're going to have to rename/join/install sccm on each...trying to simplify
this
any recommendations are greatly appreciated!

Narcoticoo : Which boot image am i supposed to be using to insure that it boots into Standard Windows, NOT WinPE? I have a standard x86 package / boot image i've been using. If it boots up with this, it goes into WinPE (correct me if I'm wrong,
for this seems to be what happens each time it boots off the boot image...it does not go into windows standard/full)
When I go into properties of the one i'm using, and take the check off of "Use a boot image", where it will not boot to WinPE, it will not even show up in my list of available task sequences for
1) when I PXE boot to try the task sequence, or
2) when I try to make stand-alone media for this task sequence as you have suggested
When I run the standalone media, the only log files I find are the following with errors:
PackageID = 'MPS0014E' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
BaseVar = '', ContinueOnError='' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
ProgramName = 'MPHS - Rename Computer' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
SwdAction = '0002' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
IsSMSV4PlusClient() == true, HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,332)
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Configuration Manager client is not installed
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Process completed with exit code 2147500037
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package. Execution has been aborted
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the last action: Install Package. Execution of task sequence failed.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,866)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task Sequence Engine failed! Code: enExecutionFail
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task sequence execution failed with error code 80004005
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)

Send state message to SCCM after uninstall of SCCM client

Hi Everyone,
I have a batch file to uninstall the client from PC's, how would I could I send a state message back to SCCM to say the uninstall was successful? Asking because the console doesn't come back with success info, just waiting, and accepted on the program.....as
the client is uninstalled etc.
Currently running a simple ccmsetup.exe /uninstall as below, thanks for any help in advance.
I know there's a Vb script to force any existing messages to be sent, but as the CCM WMI will not exist, there would be nothing to send, right?
And I have to do this for a POF......Is this even possible??I could write to a log file with the name of the computer that just uninstalled, but really wanted to use a report.....or if there's another way to uninstall client and get the info in SCCM then
please let me know, it's been a very long few days..... cheers :)
@echo off
echo Please Wait while the system is uninstalling Microsoft's SMS/SCCM Client.
REM 'echo Checking for SCCM 2007 client...
REM 'IF EXIST %windir%\System32\ccmsetup\ccmsetup.exe GOTO DEL07
REM 'echo No SCCM 2007 client found.
echo Checking for SCCM 2012 client...
IF EXIST %windir%\ccmsetup\ccmsetup.exe GOTO DEL12
echo No SCCM 2012 client found.
echo Checking for SMSCFG file...
IF EXIST %windir%\SMSCFG.INI GOTO DELINI
echo No SMSCFG file found.
echo All software already removed or no client installed.
GOTO END
REM :DEL07
REM echo Found SCCM Client v2007. Removing...
REM %windir%\System32\ccmsetup\ccmsetup.exe /uninstall
REM RD /S /Q %windir%\System32\ccmsetup
REM RD /S /Q %windir%\System32\ccm
REM RD /S /Q %windir%\System32\ccmcache
REM echo SCCM Client 2007 removed.
REM IF EXIST %windir%\ccmsetup\ccmsetup.exe GOTO DEL12
REM IF EXIST %windir%\SMSCFG.INI GOTO DELINI
REM GOTO END
:DEL12
echo Found SCCM client v2012. Removing.
%windir%\ccmsetup\ccmsetup.exe /uninstall
REM RD /S /Q %windir%\ccmsetup
REM RD /S /Q %windir%\ccm
RD /S /Q %windir%\ccmcache
echo SCCM Client 2012 removed.
IF EXIST %windir%\SMSCFG.INI GOTO DELINI
GOTO END
:DELINI
echo SMSCFG file found. Removing...
del /F %windir%\SMSCFG.INI
echo SMSCFG file removed.
GOTO END
:END
echo Done!
rem pause
exit
many thanks

Don't you think this is a bit of a silly question? The client is what sends state messages therefore what would you expect to "send" the message that the client was removed? Seems about as effective as putting the address on the inside of an
envelope and expecting the post office to just know where to send the mail.
John Marcum | Microsoft MVP - Enterprise Client Management
My blog: System Center Admin | Twitter:
@SCCM_Marcum | Linkedin:
John Marcum

Report All SCCM clients and Collections

Hi all
I'm trying to create report
All SCCM clients and Collections
But I can't convert multiple rows (collections) in one row
I got:
Name        Collection Name
ps1             serverDP
ps1               Adobe
ps2                CRT
ps2               Note
I need:
Name        Collection Name
ps1            serverDP ,Adobe
ps2                CRT,Note
Im using following query ....but it doesn't work .Need help!!!
select
v_FullCollectionMembership
.Name
as Name,
CollName
=
stuff((SELECT
+ v_Collection.Name
from
v_Collection
where
v_Collection.CollectionID
= v_FullCollectionMembership.CollectionID
FOR
XML
PATH('')
), 1,
1,'')
FROM v_FullCollectionMembership
Gerkin

Hi,
I recommend you use Report Builder to create the report.
Using Matrix and LookupSet to merge the table.
=join(LookupSet(Fields!Name.Value, Fields!Name.Value, Fields!CollName.Value, "DataSet_name"), ",")
For more information, please review the link below:
Adding a Matrix (Reporting Services)
http://technet.microsoft.com/en-us/library/ms157334(v=SQL.100).aspx
LookupSet Function (Report Builder and SSRS)
http://msdn.microsoft.com/en-IN/library/ee240819.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

MP/DP + SCCM clients in DMZ

Similar Messages

Maybe you are looking for