MP4 and RTMPE

Hello,
I'm trying to play an mp4 file from flash lite but it only works when the file is placed locally. If I try to play it from a server that sends me files using a RTMPE protocol the file doesn't work. I tried to use a local HTTP protocol but it doesn't work either.
I just use the flash video component and this code line:
myVideo.play(url);
Does any one know what could be happening or what do I need to do in order to play the video?
Thanks in advance,
Carlos

Carlos,
Wondering if you got the solution to this problem?
I am having same issue, trying to stream MP4 video (h.264, fps 30 , bitrate 10.9 mbps) over rtmp (using wowza) and playout on Flash lite 3.1...No luck.
Any insight, will be much appreciated!
Thx
Mark

Similar Messages

I have recently bought a Seagate Goflex satellite mobile wireless hard drive. I have converted some of my AVI movies to mp4 and transferred them to the hard drive, but when I play them through my iPad 2 I can hear the sound but not see the movie. Help???

I have recently bought a Seagate Goflex satellite mobile wireless hardrive , i have converted some of my AVI movies to MP4 and loaded them onto the hard drive, when I try and play them through my I pad2 I can hear the sound of the movie but not see the film, somebody please help, what am I doing wrong as I have spent a lot of time converting these movies to be able to travel with my iPad and watch them. Thank you

Unfortunately, the drive is pretty much restricted without hacking it. That is, you can't stream its content via standardized protocols like UPnP, SMB, FTP and the like. This makes you won't be able to access its content from any third-party apps otherwise capable of playing back AVI files from UPnP / SMB / FTP / WebDAV etc. sources.
While this is certainly not a recommendation (I can in no way be held responsible if anything goes wrong): you may want to consider extending the capabilities of the drive by installing the hack: http://www.hackseagatesatellite.com/wordpress/welcome/
It'll "open" the drive for third-party, AVI-capable multimedia apps like GoodPlayer, It's Playing etc. to directly play the files over the network.

Media Encoder CS4 issues with MP4 and M4V files

I've just got CS4 and and very happy so far. EXCEPT I'm
trying to convert some MP4 and M4V videos to FLV using the new
Adobe Media encoder.
When I look at preview screen in the settings panel, the
preview is all wrong. It is just Green and Purple - kind of like
some weird negative image. This also is how the final converted FLV
looks. The CS3 version of Flash video encoder converted these exact
same files OK (although the preview was only a blank screen, but
the final file was OK).
Has anyone else seen this and more importantly, did you
manage to solve the issue?
I'm running this on an iMac G5 with 2GB RAM - could this be a
PPC issue?

Sorry my computer AND media encover version. I run Creative Cloud on a new Mac Pro
File seems to render fine
Log info:
- Source File: ***
- Output File: ***
- Preset Used: Match Source - High bitrate
- Video: 1920x1080 (1.0), 25 fps, Progressive, 00:00:42:17
- Audio: AAC, 320 kbps, 48 kHz, Stereo
- Bitrate: VBR, 1 pass, Target 10.00 Mbps, Max 12.00 Mbps
- Encoding Time: 00:13:13
04/27/2015 03:55:51 PM : File Successfully Encoded
No errors reported.
And this is what I end up with.
Is that helpful?

Premiere Elements 12 - The project stopped accepting new mp4 and jpeg clips onto the timeline. There are several there but when adding new ones they appear to place properly then immediately disappear. Any fix?

Windows 8.1 elements 12 - I have a project underway that was operating fine as i built the video file, then stopped accepting new files, both mp4 and jpeg. It appears to accept them when dragged onto the timeline but then they immediately disappear. Any solutions?

boondocker
That is an unusual situation that you are presenting.
Have you updated from 12 to 12.1 via the project's Help Menu/Update? If not, please do so.
Do you have the latest version of QuickTime installed on your computer with Premiere Elements 12 on Windows 8.1 presumed 64 bit?
The usual drill
a. What is your project preset? What are the properties of your sources media? What is the brand/model/settings of the camera recording your mp4 and jpeg.
What are the pixel dimensions of these jpeg images and how many of them are there in the project (especially when the problems set in).
b. What is the size/duration of your Timeline content when the program no longer accepts new files?
c. Describe status of your computer resources. Also, where are the Scratch Disks directed and how much free hard drive space is at that location(s)?
Troubleshooting for Unexpected/Unexplained project problems...Deletion of the Adobe Premiere Elements Prefs file and, if necessary, the whole 12.0 Folder in which it exists.
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
Let us start from the above and then decide what next.
Thank you.
ATR

How can i sync videos to my iphone 5 using Itunes 11. i also tried to convert the videos to mp4 and drag and drop the file in itunes but still i cant see videos in itunes library.

how can i sync videos to my iphone 5 using Itunes 11. i also tried to convert the videos to mp4 and drag and drop the file in itunes but still i cant see videos in itunes library.

Copied from this link.
http://www.apple.com/iphone/specs.html
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
There are 3rd party utilities available that "rip" content into a compatible format - most include an iPod and/or iPhone format selection. If a video plays in iTunes, iTunes includes an option to convert a selection for iPod/iPhone.

How to rip DVD to Sansa/iPod/iPhone/PSP/Zune and other MP4 and MP3 Players

This guide shows you how to rip DVD to MP4, AVI, MP3, WMV, WMA, FLV, MKV, MPG, RM, 3GP, and other video/audio formats supported by popular mp4 and mp3 players by using DVD Ripper .
Step 1: Install and run DVD Ripper
Step 2: Import DVD.
Place the DVD into your DVD drive and click the “Load DVD” button to load DVD.
Tips: This DVD Ripper can load three DVD source, you can load your DVD from DVD drive, DVD folder in your PC and also IFO file.
Step 3: Video settings.
Select the output video format you want from the “Profile” drop-down list.
Tips:
1: You can also select Audio Track and Subtitle from their respectively drop-down list.
2: If you like the current image of the video you can use the “Snapshot” opinion. Just click the “Snapshot” button the image will be saved and you can click the “File” next to “Snapshot” button to open your picture. You can select the destination of the picture by clicking the “Preference” button. As default the captured image will be saved at:
C:\Documents and Settings\Administrator\My Documents\Aiseesoft Studio\Snapshot
3: If you want to merge the selected contents into one file you can check the “merge into one file” option. As default the merged file is named after the first selected file (either a title or a chapter)
4: You can click the “Settings” button to set your video parameters.
In the Video Settings, you can select Encoder, Frame Rate, Resolution and Bitrate for your movie
In the Audio Settings, you can select Encoder, Channels, Bitrate and Sample Rate for your movie.
when you choose the specific settings, the lower window will show the "help" to explain the meanings of each setting.
Step 4: Start conversion
Click the “Start” button to start your conversion and in a short while it will be finished.
Step 5: Click “Open” button to open your output destination file.
More tips:
1: Trim Movie
If you just want to convert a clip from your DVD movie, you can click the “Trim” button to open the Trim dialog, you can trim a duration of the selected title or chapter by either dragging the Start Time and End Time sliders or setting the time parameters in each corresponding field.
After you set the trimming time, the length of the captured clip will be shown in the Select Length box for your reference.
2. Movie Effect
If you want to change the original video effect, you can click the Effect icon to set the video brightness, contrast, saturation, etc. You can also set the special effect for your movie to cater to your need.
3. Video Crop
With Aiseesoft DVD Ripper you can remove the black edges around your movie video by checking the “Crop” option, so you can watch your movie on your portable players in full screen.
There are three methods available to crop your video:
Method 1: Crop by selecting a crop mode
Select a crop mode in the crop mode drop-down list and click OK to save the crop. There are three pre-set crop modes
for your choice: No Crop, Cut off top and bottom black edges, Cut off top black edge.
Method 2: Crop by adjusting the crop frame
The crop frame is the dashed line around the movie video. There are four adjustment lines on the crop frame. Each line allows you to crop the movie video from a different position.
To crop your movie video, you can just move your mouse cursor to an adjustment box and drag the crop frame.
Method 3: Crop by setting the crop values
There are four crop values on the lower left part of the crop window: Up, Down, Left and right. You can set each value to crop your movie video, and the crop frame will move accordingly.
Before you start to crop your movie video, you can select an output aspect ratio from the Zoom list. There are four choices available: Full screen, Keep original, 16:9 and 4:3. After you select an output aspect ratio and finish the crop, the result can be previewed in the Preview window of the program main interface.
dvd ripper for mac

Thanks! But when I visit the site recently, I found the program was upgraded. Now it has 2 optimized output formats specially made for iPod 30G and 60G players! Thus it is easier and more convenient to use without complex settings as other software. Try it at http://www.imtoo.com/downloads/dvd-to-ipod.converter.exe
Another good news: there was a new discount suite ImTOO DVD to iPod Suitethat contains both the DVD to iPod Converter and iPod Movie Converter. It saves newly $20! Hope this can do some help

I Can't Play .MP4 and .mkv Files Backed up in Time Machine

I backed up My Macbook to an external hard drive in my passport / Time Machine. I am attempting to play both .mp4 and mkv files in quicktime and vlc respectively. They worked when they were on my computer, but I they won't open now. I even tried to copy them to my computer and play them that way. When I click on info, it shows the file size, and it seems normal. I updated both Quicktime and vlc, and it still doesn't work. Please help.

You wrote in your first post:
I even tried to copy them to my computer and play them that way. When I click on info, it shows the file size, and it seems normal.
Then you wrote:
when it restored it, the file size was zero
Which of those statements is true?

How to place local mp4 and ogg video in Muse?

I have been using Flash to create interactive training including FLV over the web. Now that FLV is dead on the web. I wanted to use Muse but my customer requires video clips to be on his business server. Muse appears to only support uTube like video? Is there a work around to play local mp4 and ogg video by adding HTML code into Muse?
JU in Chelan

There is a native audio and video players embeded here >>
http://jforbes.us/test/index.html
I coded the HTML in Dreamweaver, Inserted it into Muse, Exported to HTML, FTPed to host.
At first it didn't play because I hadn't uploaded the media files. Once that was done - It seems to work.
Excuse the An animation at the top of page. I just used an existing Muse test page to test your idea.

How to export a Proxy video in MP4 and H.264

What's Proxy file, how does it look like? I know how to export mp4 and compress it with H.264, but what else should be included to make it a Proxy file from FCP6?
Thanks,
ZM

A "proxy" is just a lower resolution video file. It can be an MP4, or H.264, or any other flavor of Qt that is lower resolution than the master file. A timecode window burn in would be helpful.
www.imagineproducts.com has a great application that does this for you...automated. ProxieMill will make proxies from either captured media, or P2 cards...VERY useful
Shane

Playing local MP4 and 3GP video in Flex app

I try to load video from local computer.
I alreary done it for FLV format via NetStream.
Now i need to support MP4 and 3GP video formats. I don't know can I do it only in client or I need first upload video to server and than than use it.

at the time i'm posting this it was the thread immediately below this one.
that will change when i post this though, http://forums.adobe.com/thread/1393936?tstart=0

TS1382 my ipod will not play any format of film i have tried mp4 and .mov and it says this format not supported what is the problem

i have an ipod classic and i have tried to put films on but every format i try it keeps saying thei format not supported i have tried mp4 and .mov and it will not take it anyone got any suggestions on what format to use and the best way to convert films

If these problem videos are already stored in your iTunes library, try using the iTunes built in convert to convert the file to an even friendlier iPod format. To use it, highlight the video in iTunes and choose Advanced -> Create iPod or iPhone version from the drop down menu. When the conversion process has completed, try syncing the new version over to your iPod Classic.
B-rock

.mp4 and .avi video thumbnails in finder view

Hi, Some of my .mp4 and .avi video files have a thumbnail in finder view and some don't... Does anyone know how I can solve this?

function(){return A.apply(null,[this].concat($A(arguments)))}
the_wine_snob wrote:
Maybe, but maybe not. I use DigitalMedia Converter to convert to DV-AVI Type II's (I'm only doing SD), and it has a Split function. However, I have never used that, so do not know how well it might work for your needs, if at all. I just do not know. I believe that Deskshare has a user forum, and that might be a good place to try, after you've looked down their FAQ's.
I hope that others will have a definitive answer for you, with iron-clad suggestions.
Good luck,
Hunt
i don't know.

.mp4 and .mov files are just LARGE

Sorry, without posting all the encoding details, is there an obvious reason why my .mp4 and .mov files are ~10x the size that they should be after AME? I'm talking about files that are 30mb .mp4's before and 300mb.mov afterwards. If you need details I'll post. Thanks.

File size is determined primarily by only two factors - duration and bitrate. The codec used, resolution, frame rate, etc. all have little or no effect on file size.
Duration, and bitrate. If you want a smaller file, one or the other of those has to be reduced.

Is there any difference in quality between mp4 and m4v?

Is there any difference in quality between mp4 and m4v? I am figuring out how best to save old VCR files. Is the 264 category the best?

So, what would that software be? Anything that I mentioned, e.g., iMovie? Any Video Converter?
I'm a Mac user so I want files that play "natively" in QT X, QT 7, QL, iPod Touch, iPhone, iPad, and/or TV players. This means I want the H.264/AAC compressed data in MOV, MP4, or M4V file containers. I can use QT 7 Pro, MPEG Streamclip, and /or QT X to move MPEG-4/AAC compressed data to MOV file containers, MPEG Streamclip to movie M4V and MOV MPEG-4/AAC data to MP4 file containers, and Subler to move MP4 or MOV MPEG-4 AVC/AAC/AC3/Chapter data to M4V file containers. This is strictly a simple "copy" operation and no recompression of data is involved. (I.e., the quality is not changed.)
iMovie is a video editor and it forces an export conversion of your project once completed which can degrade quality. Have never used the Any Video Converter so I don't know if it has an audio and/or video "passthrough" feature for data already in a compatible compression formats. If it doesn't then any conversion it makes has the potential to degrade video content.
As to AVI, this is a legacy file container abandoned by Microsoft a dozen years ago in favor of their modernized WMV compression format/file type products. Compared to MKV, AVI is an outmoded/out-of-date container which I don't recommend you use unless you are a glutton for punishment. However, if you must use it, then you might try the AvidMux app. It can "copy" compatible content to a number of file container types—including AVI and MKV. Just don't blame me if its use creates more problems than it solves on current Mac systems.

Trouble Importing MP4 and M4V files

Hi, I am creating iMovies and importing them into YouTube as MP4 and M4v files. All was fine until a week ago, and now all MP4 & M4V files are failing to load in YouTube. I have had no luck on the YouTube discussion forum. Has anyone had this problem and offer a solution? I have tried the multi-loader to no avail. My videos are all to spec with YouTube ie less that 10 min and under 1 GB. Thanks for your help.

Anyone seen this error before? I went ahead and recereated
what I could in Flash but I have some other wmv and mov files that
I would like to import, but right now I keep getting the error.
Any help would be much appreciated. thanks!

MP4 and RTMPE

Similar Messages

Maybe you are looking for