Mpower max 780 lightning UEFI not displayed right and windows 8.1 no DVI-input

Hi all,
I’m new to the forum, I’m very sorry that my first post is the posting of a problem.
I’ve read several treads just to be sure I’m not asking the same question twice.
In this case I have 2 problems, both are problems more users have issues with but not as a combination of both, that’s why I posted it.
I’ll start with my rig:
Intel i7 4770K
MSI Z87 Mpower Max
MSI Geforce GTX 780 lightning
Crucial Ballistix tactical BLT2C8G3D1608ET3LX0CEU
Crucial 2.5" M500 480GB
Seagate Barracuda 7200.14
Seasonic Platinum Series 860 Watt
Asus VG248QE monitor
The problems
After installing my rig myself I stated it up and everything worked fine.
Installed windows 8.1
Installed a few games (I couldn’t wait to try it out)
Then after shutting down and starting up de the next day the problems started
The bios screen wasn’t displayed right:
- Resolution isn’t correct
- Getting art-effects when trying to adjust a setting in the bios
- When saving, bios is stopt working with an error message that the bin file is incorrect
 so setting up the bios is a big problem
The second issue is that when I let it go and load windows 8.1:
- It shows the partially BIOS image (big yellow M)
- Then the windows logo with the loading circle
- Followed by a black screen and my monitor telling me that there is no DVI signal
What I’ve done so far:
A windows 8.1 repair (so everything whipped) “fresh” install on my SSD then again install of the Nvidea driver.
This worked for a hours of gaming funn, with 3 or 4 reboots of the system (so I thought problem fixed).
Sadly not, I began to check the forums and found that I needed to run W8.1 in safemode to clear the Nvidea drivers en again install the latest version along with the Intel VGA drivers.
I’ve tried that but no luck on that one.
And yes I’ve tried to clear CMOS (several times)
I’ve tried to flash the BIOS but I can’t select my USB drive when I press F11 (so I’ll be trying another USB stick soon)
Getting the bootsequence to boot from USB isn’t an option also because of the bios screen issue.
Does anyone have the same issues, or even better does anyone have a solution to all my troubles?
Thanx,
Quasi

Quote from: flobelix on 22-November-13, 02:03:09
Ok it is in legacy mode then. Waiting for your report. If it comes up on the igpu also check the bios version. Would be better than guessing.
Oke tested the HDMI cable, after starting up finally i got a normal BIOS view again.
BIOS Version E7815IMS V1.2 (so it's 1.2 instead of 1.0) so much for guessing...
As expected windows started normally in high resolution.
So i think the problem is that the MB bios doesn't work wel with the videocard or the videocard is DOA.
any thoughts for the next step?

Similar Messages

  • Captivate 4 shortens timeline - elements are not displayed right anymore

    Hi there,
    I already searched the forum but couldn’t find an answer. Maybe someone of you can help me.
    I have a weird problem with the timeline – in short: it changes.
    I have some slides, based on imported Power Point slides. Within captivate I add some Audio (TTS), let appear images & textboxes simultaneously, add buttons etc.
    Sometimes I extend the slide duration (for example when slide transition is set to automatically).
    And now the problem that occurs: Captivate shortens the timeline – exactly to the length where the audio ends. Doing this causes that elements which are placed at the end of the slide are also shortened and not displayed right anymore.
    This is shown in the following screenshot. On the left side of the cursor you can see an image element that normally should fade in directly after the audio ends and should stay for 4 seconds.
    I couldn’t figure out when this happens. This means that I have to check every slide again to make sure that all elements are displayed right. Locking elements or the slide itself doesn't help.
    Does anybody know why this happens and how to avoid this? I am using Captivate 4 and publish as an .exe or an .swf
    Your help is appreciated. Thanks a lot!

    Hi Noel
    If you click Edit > Preferences > Global > Defaults do you have the option Calculate caption timing enabled?
    If so, that's likely your issue. Clear the option and your timing should stay put when you make edits.
    Cheers... Rick
    Helpful and Handy Links
    Begin learning Captivate 5 moments from now! $29.95
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • I was recently sent a very large emoji message amd now when i try to acces messages it will not display mesagges and then will bring me back to the home page

    was recently sent a very large emoji message amd now when i try to acces messages it will not display mesagges and then will bring me back to the home page

    Quit the messages app and reset your phone.
    Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it jiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally. Then reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart.
    After the phone restarts go into Messages and delete the thread containing the problem message.

  • Compressed PDF file is not displaying properly in Windows 8 Reader app

    Hi,
    We have compressed a PDF file using some third party library. The compressed file is displaying properly, when we're opening the file with ADOBE reader. The same file is displaying blank, when we're opening the file with Windows 8 reader.
    Can anyone help us to solve this issue?
    Regards,
    Kamaraj P

    Hi Puneet,
    Thanks for your reply.
    I have shared the skydrive link of PDF files which are not opened properly with Windows reader.
    https://skydrive.live.com/redir?resid=2BA789F8EDB6510C!228&authkey=!ADyKA-JLOFDTqyI
    Flowers.pdf is not displaying correctly and Tiger.pdf is displaying as blank in Windows reader. But both are displaying correctly in Adobe reader.
    We have used LeadTools 14.5 library to compress the pdf files.
    Regards,
    Kamaraj P

  • Ipod will not display track and artist name when i play a song

    ipod will not display track and artist name when i play a song... i cant see the the volume display to adjust it eiether. Everyting shows up in the menus just not on the now playing screen.... any suggestions?

    Try restoring your iPod. Just be aware that restoring will erase the hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation. If you want to update manually or using selected playlists choose no and it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

  • Application is not displaying correctly and is showing as incomplete

    please i really need help i am not understanding this at all i need to send them as pdf files because there application forms I have an issue when it comes to sending the pdf files to someone else and they open the file to then tell me that the text on your application is not displaying correctly and is showing as incomplete.
    how do i fix that, they are opening it up using adobe 11 the same as I.

    Hey Robert,
    Please let me know what OS are you using and ensure whether you are using Adobe Acrobat or Adobe Reader to view PDF files.
    Also, tell me whether the recipient downloads the file first and then open in Reader or opens it in the browser only.
    Please clarify to me whether you are getting this error pop-up or the recipient?
    Hope to get your response.
    Regards,
    Anubha

  • QuickWatch windows does not display Value and Type.

    The quick watch window is only displaying Name (screenshot below). It is not displaying Type
    and Value fields. I tried "Reset All Settings", repair, uninstall/install but the issue is not resolved.  I will appreciate any help.

    Hi ranjanks,
    Could you share us a sample? So we could debug the same app in our side, please also tell us the VS version in your side.
    For example, just a simple console app with a variable "int i"， I could get it in my VS2013 version like the following screen shot. So if you debug a simple sample as mine, how about the result? If it works well, I doubt that it would be related
    to the specific variable of your app.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Safari 5.1 will not display Java applet window

    I Just updated to safari 5.1 via software update.  It will not display java applet window on http://www.goldprice.org/live-gold-price.html ,i can view it using firefox. I have done a Safari reset, done a new install of 5.1, ran disc utility, unblocked popo up winows and restarted machine

    1). restart system with original start up disc, holding down "c" key.
    2). using time machine restore from non "lion" operating system. this will kill p.o.s. lion.
    3). once back in non 10.7 OS be careful not to install via software updates, sarafi 5.1
    4). sarafi 5.1 like lion *****.
    5). if you have sarafi 5.1, degrade by typing in this: support.apple.com/kb/dl1939
         a). a very large software update that degraded my sarafi 5.1 back to sarafi 5.05
    6). streetsmart.com and java worked fine for me after this fix.
    7), also you can download firefox, and though slower than sarafi 5.05 it will load java, and stock screens.
    GOOD LUCK. my first microsoft moment with apple in 8 years of chronic love for their products. time to
    sell AAPL shares.

  • Firefox not displaying buttons and boxes when allow other pages to use their fonts instead of my selection is selected

    Firefox not displaying buttons and boxes when allow other pages to use their fonts instead of my selection is not selected. The irritating thing is that Firefox used to display pages until FF 31. Please fix this
    Thanks
    Randy

    The missing icons are supplied by a font that is downloaded from the server (@font-face) as you can probably see by little boxes that show the hex code of the characters.
    You will have to make sure that you allow pages to choose their own fonts to see such an icon font.
    *Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"

  • Mac outlook 2011 not display "Contact and Recent addresses"

    I just installed Mac outlook 2011 in my new 2014 Macbook Pro OSX 10.9.4
    When I type email address to the bar it does not display "Contact and Recent addresses" to list all the typed email address. Only if I press "tab" button, it will finish the rest of the address. The point is I cannot choose the address
    from a list of same name persons.
    However, it works well in my old Mac Book pro. OSX 10.9.3
    Thanks.

    Hi,
    Since the issue is related to Outlook 2011 for Mac and this forum focuses on Microsoft Outlook for Windows, I recommend you to ask a question in Microsoft Outlook for Mac forum for more professional suggestion:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macoutlook?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1398357753849
    The reason why we recommend posting appropriately is
    you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Regards,
    Winnie Liang
    TechNet Community Support

  • MSI Z87 Mpower 1150 / 780 lightning x2?

    I wanted to know if the Z87 Mpower 1150 board will hold two MSI GTX 780 Lightning cards with the reactors on them still.  They kinda take up three slots so I am unsure.  I wanted two lightning cards for my new build but I am unsure if the two lightnings will fit for SLI.  Thank you for your time I appreciate the help.  It would not let me post any external links, let me know if you have any questions or need any more info.
    Thank you!!

    Yes, but since you are spending the money you may want to look to a board that will run the cards at 16x each?
    The one you have picked will run two cards at 8x / 8x
    http://www.msi.com/product/mb/Z87-XPOWER.html#download
    5x PCIe 3.0 x16 slots (PCI_E1, PCI_E2, PCI_E3, PCI_E5, PCI_E7)*
    The operating mode will be x0/ x16/ x0/ x0/ x0, x16/ x0/ x0/ x16/
    x0, x8/ x0/ x8/ x16/ x0 or x8/ x0/ x8/ x8/ x8.*
    Support for installing up to 4 PCIe x16 expansion
    This board will allow more space between the cards and 16x /16x operation.. If going for overkill, might want to go all the way 

  • MPower Max AC SB Cinema not detecting audio?

    I'm trying to get SBc2 to recognize the realtek audio but i'm getting a ' audio device not found' type error. I've tried the latest drivers on Realtek's site, on the dvd and on msi support page. Nothing seems to fix it. I've installed sbc2 first and then the drivers and i've switched the order. Same issue. I'm running Win 8.1 and i'm also getting aggravated.
    SBC was one of the reasons this motherboard was purchased snd now I'm regretting this decision. Should have bought the asus.
    The wifi module is also the dumbest design choice i've seen in a while.

    Quote from: hpipiw on 03-November-14, 11:02:03
    Your MOBO is Z97 MPOWER MAX AC?
    Could you list your full spec?
    Try removing SBC2 and all the drivers, installing again from driver DVD.
    first chipset driver, second Realtek, then SBC2.
    Yeah it's a z97 mpower max ac.
    Full specs?
    4790k, MSI Twin Frozr GTX 970, 8GB Mushkin Silverline, 240 Crucial SSD, RM650 Corsair power supply
    I've tried it all sorts of ways. Should I uninstall Nvidia drivers and then try installing it again? Is the stupid program detecting the HDMI audio off the videocard and going crazy? What a POS if that is the case.

  • Fonts are not displaying right

    I'm creating a website with Muse and I need to use Scandic letters. But they don't seem to work. I've tried both web fonts and web safe fonts but the letters are still not displayed. I have closed Muse and relaunced it with no success. I'm using the latest version. In previous versions I didn't have any problems like this.
    The site is www.sumiaispiiras.com I really need help to solve this fast.

    Hello,
    what I was doing was launching the website without doing it in Business Catalyst (through ftp directly to my web host using my own domain) however the fonts didn't work. So I tried to launch it in BC and the fonts were working perfectly there. After that I contacted my system provider (web host) and what they did was  that the added .htaccess file  "AddDefaultCharset UTF-8" to my homepage. So the problem was that they didn't have the same code as what Muse uses. So if anyone has the same problem, try to publish the page in BC and see if the fonts work there if they do the problem is not with Muse.

  • Help topics are not displaying when using Windows 7 / IE 9 / RH10

    We recently upgraded our library from RH8 to RH10.  Also used a trial version of  RH9 in this process. Now when we compile several of the projects have issues where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (like it is trying to load).  If you right-click on the topic it displays (we are currently using this as the work-around).  Anyone else having this problem?? I saw something similiar for Windows8/IE10, but the fix does not apply here (http://forums.adobe.com/message/5138909#5138909#5138909).

    Hi,
    I (April) apologize I have been OOO and have not been able to respond to your replies.  
    Let’s start over. 
    We have an issue where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (flickering like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around).
    We use Windows 7, IE9 and RH10 for all our projects. (Recently upgraded from RH8 to RH10)
    Turns out the problem is not isolated. I have run across it in at least one other project, which leads me to think it also occurs in others.
    "Does this only occur when the help is called from your software? Is it OK if you double click the start page?"
              No. I it ALSO occurs when launched from the start page. 
    Have you tried deleting the CPD file and reopening Rh and the project?
              Yes, without success.
    Are you using any redirects?    
              Per (Adrienne), “I am not using any redirects. I encounter this issue only in IE. If I paste the .htm into a Firefox browser, the help displays as it should.” 
              I will add that the project also displays incorrectly in Google Chrome.
    Thanks  April

  • Help topics are not displaying when using Windows 8/IE 10

    I have a WebHelp system created in RoboHelp 7. When opening that Help from our application using Windows 8 with Internet Explorer 10 and allowing blocked content, the Help topics do not display in the right pane when clicking a topic from the Contents in the left pane. Below are the steps:
    1. Open the Help system from the Help menu within the application.
    2. The Allow Blocked Content displays and I allow it.
    3. The Help opens and if I click a topic from the TOC in the left pane, the topic doesn't display in the right pane.
    A workaround we found was to widen the left pane and the topic then displays. Also, if you don't allow blocked content, this issue doesn't happen. However, I need to allow blocked content in order for PDFs within the Help to open properly and also because the Search doesn't display without allowing blocked content.
    We also tested this with a Help system that was created using Robohelp 9 and have the same issue. I'm wondering if RoboHelp 10 would solve this problem.
    Does anyone know if IE 10 requires Help systems to be created in RoboHelp 10 to work properly, at least when allowing blocked content?

    It seems to be time for the old divide and conquer approach.
    Zip up the project so you have a copy that cannot accidentally be opened and worked on. That gives you a copy that you can safely revert to later if needed. Save the zip file somewhere safe.
    Then create another copy of the project so that you have two copies that can be worked on.
    Open Copy 1 and delete half the topics. Ignore any broken links reported. Generate the help from that copy.
    Open Copy 2 and delete the other half of the topics. Generate the help from that copy.
    It should be the case that one copy is now OK and one still has the problem.
    Trash the good copy and then create a second copy of the copy with the problem.
    Repeat the process until you have located whatever is causing the problem.
    The process takes less time than you might think.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

Maybe you are looking for