MQSeries Adapter and adapters in general

I've tried the MQSeries Adapter and the Siebel Adapter and both give me the
following exception at runtime through the test harness.
I have included the com.ibm.mq.MQException class through the jar
(com.ibm.mq.jar) by setting the CLASSPATH env var in startWeblogic.cmd:
SET
CLASSPATH=%CLASSPATH%;"c:\Progra~1\IBM\MQSeries\Java\lib\com.ibm.mqjms.jar";
"c:\Progra~1\IBM\MQSeries\Java\lib\com.ibm.mq.jar";
Am I reading this properly, that weblogic cannot find this class?
Any help would be greatly appreciated. Thanks in advance.
From the log:
java.lang.Exception: Adapter took exception:
<eda>
<error cnctag="" code="-100" source="process"
timestamp="2003-03-05T17:21:22Z">NoClassDef exception processing agent
XDMQEmitAgent: com/ibm/mq/MQException</error>
<data><?xml version="1.0"?>
<BusinessComponent bcname="Account"
boname="Account"
operation="insert">
<Field name="Currency Code"
value="USD"/>
<Field name="Name"
value="JDB 5"/>
</BusinessComponent></data></eda>
at com.ibi.edaqm.XDLclWorker.document(XDLclWorker.java:181)
at com.ibi.edaqm.XDLclMaster.document(XDLclMaster.java:605)

Very excited in what Palm has accomplished in so short a time. I've remained much more positive than you seem to have become prior to CES, but I'm definitely as excited after. Maybe more so.

Similar Messages

I've bought an USB-to-ethernet-adapter and a minidisplay-port-to-VGA-adapter. But I can't use them at same time. At first, I plugged those two adapters and only the USB-to-ethernet worked. Tried restarting the mac then only VGA adapter worked.

I've bought an USB-to-ethernet-adapter and a minidisplay-port-to-VGA-adapter. But I can't use them at the same time. At first, I plugged those two adapters and only the USB-to-ethernet worked. I tried restarting the mac then only the VGA-adapter worked. I also tried to reinstall the OS.
I'm using new 13-inch MacBook Air early 2015. OS X 10.10.3.

Thanks Malcolm - Do you think it might be worth trying to flash the firmware on these cases - there seem to be updaters available on Prolific's website. Obviously I'd have to do it on a PC. I've emailed Prolific asking them about my problem. No reply as yet, and I'm not holding my breath! Do you know if there are any other posts on these boards relating to Prolific? Stupid question really - I'll just do a search...
Thanks again for your post. Cheers from Bonnie Scotland.

My MBP Retina doesn't allow the use of two Thunderbolt to DVI adapters. It only works with one TB - VGA adapter and one TB - DVI adapter. However now the color on the VGA connected monitor is slightly different.

The monitors are Viewsonic VA2406m-LED. The Display preferences show all three monitors but one monitor always says "No Signal" if they are both connected TB -> DVI.
The Color on the VGA connected one is slighly off. It seems like I should be able to connect two DVI monitors not sure why this is stopped. Does it have something to do with the Graphics card?

The problem was with the newEgg adapter. I just went to the Apple Store and bought an Apple adapter and the monitor now displays correctly.
For future reference, in case anyone experiences this problem:
the newEgg adapter is part number 9SIA1PU0P88920, described as a Thunderbolt Mini Displayporrt Display Port DP to DVI Adapter for APPLE Macbook Pro Air and the full description says it works for macbook pro, etc.
when this adapter is used, the macbook pro recognizes the monitor, but the monitor displays nothing.
When the apple adapter (MB507Z/B Mini Display Port to DVI Adapater) is used, the monitor displays correctly.
Of course, the individual newEgg part might simply be defective, but I doubt it. moral -- spend the extra $$ and buy the Apple adapter.

" SYSTEM ERROR" with ERROR CATEGORY: Message and ERROR ID : GENERAL

HI all
I m doing JDBC -> XI -> SOAP -> XI -> FILE ( XML) scenario .I have implemented it using BPM .
But ,In MONI , i am getting a "SYSTEM ERROR " with "ERROR CATEGORY : MESSAGE" and "ERROR ID : GENERAL" .and
One thing more is there my all adapters are active (JDBC,FILE) in runtime workbench but SOAP adapters i am not able to see it there as its services are not defined in there .Is this problem is because SOAP adapters are not defined in runtime workbench ?

Hi Colin
I are using SP 3.0
I have checked the Communication channel monitoring and Adapter monitering also but in mine case when i want to see the SOAP adapter in adapter monitoring , the SOAP ICON is disabled there ,so i am not able to see whats the status of my SOAP adapter i have used in my scenario
Thanks and Regards
Abhishek

Difference In RFC Adapter and XI proxy

I am using RFC adapter for master data and XI proxy for transaction data , can anyone tell me what is major difference and what is negative point in using RFC adapter
Thanking you
sridhar

Hi,
Adapters enable the Integration Engine and the Partner Connectivity Kit (PCK) to communicate with different applications.Adapters connect the Integration Engine to SAP legacy systems, as well as to external systems.
In this way, adapters integrate existing SAP components with SAP Exchange Infrastructure, for example. In the process, XML and HTTP-based documents are converted to IDocs (IDoc adapter) and RFCs (RFC adapter) and the other way around. This enables you to integrate your existing SAP infrastructure with the new SAP infrastructure, which is based on system integration and the exchange of XML messages.
The plain HTTP adapter gives application systems the option of communicating with the Integration Engine and exchanging business data in a simple format, using an HTTP connection.
RFC Adapter :
The RFC adapter enables you to use the functions of the Integration Engine or the PCK in existing SAP landscapes. It is used by SAP systems to connect to the Integration Engine or the PCK by using the RFC interface. It supports SAP systems as of version 3.1x.
For FAQs about the RFC adapter, see SAP Note 730870
The RFC adapter is provided by the Adapter Engine and the PCK. It essentially comprises two parts, namely a sender adapter at the Integration Engine inbound channel, and a receiver adapter at the Integration Engine outbound channel.
The adapters are configured in the configuration part of the Integration Builder, or in the configuration part of the PCK. You use the SAP Java Connector (JCo), which enables you to manage metadata. This in turn enables you to map RFC data generically to RFC XML and the other way around.
The receiver RFC adapter can be used for mapping lookups.A communication channel with a receiver RFC adapter can be created automatically for business systems that are defined in the System Landscape Directory.
The RFC adapter maps the following RFC calls to XML messages and the other way around:
Synchronous RFC calls (sRFCs) in messages with quality of service Best Effort (BE)
●     Transactional RFC calls (tRFCs) in messages with quality of service Exactly Once (EO)
●     The receiver RFC adapter can also process messages with quality of service Exactly Once In Order (EOIO). They are mapped to transactional RFC calls (tRFC).
You require the sender adapter if you want to use the Integration Engine or the PCK to process RFCs. The RFC adapter converts the incoming RFC data to XML message format (RFC XML) so that it can be processed by the Integration Engine or the PCK.
You require the receiver adapter if the determined receiver system expects the data from the Integration Engine or the PCK to arrive in RFC format. In this case, the Integration Engine or the PCK must transfer the received XML message (RFC XML) to the RFC adapter. The RFC adapter converts the RFC XML message to a valid RFC call and executes the call.
Proxy :
Generally speaking, interfaces are where functions in a system can be executed. In the context of SAP Exchange Infrastructure, only the following interfaces are relevant:
·        Interfaces designed for message exchange between application systems
·        Interfaces used by a cross-component integration process to receive or send messages, or both
Starting with a cross-system integration process, you can then derive the corresponding interfaces required. SAP Exchange Infrastructure supports this process by using an integration scenario to describe the collaborative process. The integration scenario summarizes the interfaces required for this collaborative process.
You can use SAP interfaces that already exist in systems, non-SAP interfaces that are connected to SAP Exchange Infrastructure using adapters, or define new interfaces called message interfaces in the Integration Repository. Both worlds can also be interconnected in a collaborative process.
Interfaces are an essential component of SAP Exchange Infrastructure:
·        You define the interfaces to be used in an integration scenario.
·        Cross-component integration processes use interfaces to exchange messages.
·        You define the XML transformations for messages that are to be exchanged between two interfaces in a mapping.
·        You assign an interface in a sender system to one or more interfaces in a receiver system in logical routing.
·        You generate proxies to implement your scenario based on message interfaces.
You save interface descriptions (message interfaces, BAPIs, RFCs, and IDocs) in the Integration Repository so that they can be referenced throughout SAP Exchange Infrastructure. However, adapters for external systems do not normally use interfaces; instead they access files or database tables in order to function, for example. For this reason, it is not necessary to import these interfaces into the Integration Repository. If the structure of the message is described using a WSDL, XSD, or DTD schema, you can import the schema as an external definition.
Hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful

Apple Mini-DVI to Video Adapter and Mac mini (2009)

Can anyone tell me whether the Apple Mini-DVI to Video Adapter listed here:
http://store.apple.com/ca/product/M9319G/A
works with the latest Mac mini (early 2009)?
If it does not what other solutions are there to connect to composite, component or s-video?

KC from Ann Arbor, MI had this to say as a review on the page to which you have linked;
10-May-2009
I bought a Mac Mini (May 2009) and this Mini-DVI to Video adapter with plans to use it to send an S-video signal to an analog TV. Though the sales staff at the Apple store said it should work, it does not. The graphics card apparently should support it, and it may be addressed with a future driver update, but as of now this does not work. I have used a mini-DVI to VGA adapter and monitor to verify that the port is working, and also verified that the S-video cable and TV input work. There are third party VGA to S-video/RCA adapters available so I plan to use one of those for my purposes. This is probably a 5-star product when used with the right Mac; however, Apple should have made it clear that having a mini-DVI port on your Mac is necessary but not sufficient for this to work - hence the 3 stars.

Connect two external monitors to mini DP(using a mini DP to VGA adapter) and the VGA out at once

I am trying to connect two external monitors to mini DP(using a mini DP to VGA adapter) and the VGA out at once. Windows recognize both monitors as well. But it dowsn't let me use all three monitors at once(see the below image). In the dropdown, it lists all three monitors. Problem is there are two active displays I can select.

Mavec wrote:
I would like to add a third monitor.
The GPU(s) in your T400 (and most other laptop brands) will support two different displays concurrently. If you want to support more than two different displays concurrently, you will need another GPU external to the T400.
Generally, if you want to use two external displays on a T400 you will nee dto use a docking station.
I have read messages on various fora on this topic and know that there are a number of ways of doing this, but as I have never had a need to do this myself I can't tell you how to go about it.
Cheers,
Bill
I don't work for Lenovo

Macbook (late 08) 13.3" -- miniDV to DVI adapter and Dell 24" 2405 FSP Flat

All
Just purchased a Macbook 13.3" and bought the miniDV to DVI adapter for my 24" Dell 2405 FSP. For whatever reason, I cannot get system prefs to "detect display".
I am not sure if the cable is broken out of package or there is a problem with this adapter in general. I am trying to use the cable to view OS/X and XP Home via Bootcamp on large screen while Macbook is in clamshell (closed) mode.
Seems like a lot of people are having issues but I don't know what to do. It seems the cables from Apple vary by model and worse, appear to be lower quality than most would expect. Any thoughts on commands or steps to try and diagnose. Or should I buy the miniDV to VGA adapter for the Dell flatscreen?

Update to this issue.
1. Friend brought his Macbook Pro 17" with full DVI adapter to my Dell 2405 FPW -- he has same 24" flatscreen. It works -- so monitor is fine.
2. I went to Apple Store and REPLACED miniDV to DVI adapter to my monitor. No response. Not registering at all. But when friend hooked his Macbook with adapter, the screen came on.
Assumptions:
1. Macbook 13.3" aluminum port is damaged -- will go to Apple to confirm
2. Odds of two adapter cables not working - highly slim (got from two different stores if we want to shake the odds a bit more based on batch shipments
It appears that the port is NOT compatible with this monitor OR the cable quality is so bad that I have to go through a bunch of them.
Last option - miniDV to VGA adapter to my Dell monitor to see if that works. But it is one of two options -- from my perspective:
1. Monitor/port incompatibility
2. Bad cables
I even tried XP Home Edition under Bootcamp with the adapter and monitor did not display.
What's disappointing in all of this is Apple tech support told me to download "drivers" from Dell's site -- and puzzled, I asked if Dell was supporting Mac computers because OS/X did not have drivers for this monitor and Dell only has it themselves - they emailed me download links (which is convenient) but it was clear that she doesn't know what she was doing -- the links were XP and Vista only.
Sigh...Rev A Macbook. Will probably need Apple to work on this issue.

How do I get a Mini DisplayPort adapter and HDMI connection working for my Older MacBook Pro?

I bought a Belkin Mini DisplayPort adapter and attempted to hook it up on two different tvs using two different HDMI cords. I've always received a "no signal" message. I haven't even been able to get my desktop to appear. My display settings doesn't include a mirroring option and I only have the option to use my computer as a sound output. I've called apple support and I went to geek squad. Is it just impossible for older MacBooks?? I have Snow Leopard 10.6.8 and all of the forums I've read say that video should work at least. I switched out my adapter for a rocket fish one and still no luck. The geek squad employee couldn't get it to work on either adapters. Please Help!

I upgraded my OS to Mountain Lion and now it works perfectly. However, I'm getting random green and black splotches on my screen when I'm not using it with the TV.

Need help with a simple process with FTP Adapter and File Adapter

I am trying out a simple BPEL process that gets a file in opaque mode from a FTP server using a FTP adapter and writes it to the local file system using a File Adapter. However, the file written is always empty (zero bytes). I then tried out the FTPDebatching sample using the same FTP server JNDI name and this work fine surprisingly. I also verified by looking at the FTP server logs that my process actually does hit the FTP server and seems to list the files based on the filtering condition - but it does not issue any GET or RETR commands to actually get the files. I am suspecting that the problem could be in the Receive, Assign or Invoke activities, but I am not able identify what it is.
I can provide additional info such as the contents of my bpel and wsdl files if needed.
Would appreciate if someone can help me with this at the earliest.
Thanks
Jay

persiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806].

I just moved to Germany, I want to know if an adapter and converter is needed to charge my iPod, iPhone and MacBook Air is needed or can I simply use an adapter? Will the voltage automatically change?

I am having a really hard time with keeping my charger on the adapter/converter that I bought for my trip but I also bought an adapter and with that my charger doen't fall and my apple products would be able to charge withought me having to hold the charger in place. I want to know if the converter is needed or if I only need the adapter. I do not want to blowout my iPhone, iPod or my MacBook Air.

All that is requried is an inexpensive plug adapter. Apple's power adapters themselves will work with any utility power on Earth. Non-Apple power adapters may not.
I don't understand what you mean by having to hold the charger in place though.

Lighting cables and adapters are not working after the last iOS 7 update.

Looking for some help from Apple here. After the last iOS 7 update, some of my lightning cables and adapters have stopped working.
I have an iPhone 5 funning iOS 7.0.2.
I have a car charger/FM RF transmitter that has worked like a charm for years. Because none of these have been made with a lighting connector, I've had a genuine Apple adapter on it since I bought my iPhone 5 a year ago. Never had a problem until the last iOS update. Now when I plug it in, not connection is registered. I've verified the charger is working by removing the adapter and plugging the old iPhone connecting into an iPhone 4 running iOS 6. I've also verified the adapter is working by plugging the charger with adapter into an iPad mini running iOS 6.
I also have a Belkin USB car charger. This came with a black lighting cable. Also worked like a charm until the last update. Now, half the file when I plug it in, no conncetion is registered. The other half of the time, it says this cable is not supported but does not connect my phone or charge it. I've also verified that the cable is working by plugging it into an iPad mini running iOS 6.

I had the same bug. Powering off the phone and back on resolved the issue

I have connected the adapter and cable from imac to GVA HD tv but nothing seems to be happening.

I have connected the adapter and cable from imac to GVA HD tv but nothing seems to be happening. Any suggestions?

Was that message showing a s dialog when selecting the tv connection as a sound output device? I ask because I don't know the exact context of that message and never heard of it before.
It may be helpful to take a screen shot of both that message and also the list of the sound output devices while the tv is connected.
You never specified your model (year) of your imac so I don't know its limitations. Maybe some version doesn't support sound through the mini-displayport (hard to believe any model wouldn't with mini-displayport). But if that is the case you may have to resort to analog stereo from you stereo line out output jack to your tv.
One final thing. The mini-displayport adapter you have may not support audio. That was a possibility a few years ago. That is why most places that sells these things also explicity specify whether the adapter supports audio. For example, monoprice's adapter:
Mini DisplayPort | Thunderbolt® to HDMI® Adapter w/ Audio Support
or even the Moshi adapter sold through the apple store.
Moshi Mini DP to HDMI Adapter with Audio Support
Note both these adapters explictily say they have audio support.

What is the Difference Between Adapter and Proxy

Hi Master,
I want to know the Difference Between Adapters and Proxies.
And when we are using proxies and Adapters....
Regards,
SReddy

Adapters are part of the Adapter Framework. Adapters provide the technical connectivity to enable the integration of SAP and non-SAP applications through XIs Integration Engine.Again, Adapters are used for connectivity from and to external systems with XI that cannot communicate via proxies.Adapters are only required in SAP systems older than 6.20 and external systems.
Systems based on 6.20or higher can communicate directly with proxies.
The literal definition of a proxy is an object / process authorized to act for another; an agent or a substitute. In simpler terms, proxies in the XI context are objects used to encapsulate the creation (from a sender system) or parsing of XML (at a receiver system) as well as the communication with the relevant runtime components required to send or receive those messages.
Proxies are generated from Message Interface in IR.
The Proxy Runtime controls these objects / processes, and can itself be controlled by the applications it communicates with. The Proxy Runtime currently has the following components available: 1. ABAP Proxy Runtime Communication using XI or Web Services a. Web Service Runtime 2. Java Proxy Runtime Communication using XI (J2EE) The objects that the Proxy Runtime then controls are created via Proxy Generation, for both ABAP and Java. In the following sections a client proxy is used by an application to send messages outside of the system it resides in (normally to the IS in this context). Conversely, a server proxy is used by an application to receive messages from sources outside itself (again, normally the IS in this context).

Security Issues: SSL on SOAP Adapter and Digital Signature in BPM

Hi there,
we're developing a R/3-XI-3rd Party Application scenario, where the XI/3rd Party communication is based on a webservice (SOAP adapter with SSL). Also, the messages in the XI/3rd Party communication must be digitally signed. I've got some questions on both subjects.
1. About the SSL. I've started to investigate what will be necessary to enable the HTTPS option under SOAP Adapter (it's not enabled now). If I'm not correct, all I need to do is:
- check whether the SAP Java Crypto Lib is installed in the Web AS;
- generate the certificate request in the Visual Administrator and, after acquiring the certificate, store it with the KeyStorage option.
Is that right?
I'm considering that I won't need to use SSL in the ABAP Web AS, only the J2EE Java Engine (since the SOAP Adapter is based on J2EE).
2. About the digital signature. As a first solution, we had decided on accessing a webservice based on another machine running a signature application. We'd send the unsigned XML and receive a signed XML. But since that needed to be done into the BPM, I thought that using a piece of Java code in a mapping would suit it better.
But to be able to use the hashing/encrypting/encoding algorithms, which library needs to be installed? Is it the same SAP Java Crypto Lib that was installed for the SSL enabling?
Thanks in advance!

Hello Henrique,
1. You're right. For detailed instructions please have a look at the online help: http://help.sap.com/nw04 - Security - Network and Transport Layer Security - Transport Layer Security on the SAP J2EE Engine
2. The SOAP adapter supports security profiles. Please have a look at the online docu http://help.sap.com/nw04 -Process Integration - SAP Exchange Infrastructure - Runtime - Connectivty - Adapters - SOPA Adapter - Configuring the Sender SOAP adapter and from the link under Security Parameters to the Sender Agreement. You'll find some additional information in the following document: http://service.sap.com/~sapdownload/011000358700002767992005E/HowToMLSXI30_02_final.pdf
Rgds.,
Andreas

MQSeries Adapter and adapters in general

Similar Messages

Maybe you are looking for