MR21 performance slow on price update for several materials for a company c

Hi,
Can you please tell me if anyone has faced the problem of price updates through MR21 being very slow when performing the update for several materials at one go? Is there a resolution to this?
Thanks in advance

Check "Note 312013 - Bad performance when material price is changed"is applicable for your sap version ???

Similar Messages

Bought Premier Elements yesterday. EVERY time I try to open a set of clips with Editor, I am told I have to sign into my Adobe first. I do this and wait for several minutes for the password dialogue box to open, enter my password. then wait and wait until

Bought Premier Elements 13 yesterday. EVERY time I try to open a set of clips with Editor, I am told I have to sign into my Adobe first. I do this and wait for several minutes for the password dialogue box to open, enter my password. then wait and wait until my pw is recognized. Accept agreement. Agreement screen disappears and I'm back where I started. Try to open video clips with editor again and get the same demand to log in. Please advise asap. thx

Oldcameraman
Please do not duplicate a thread. The threads are answered as soon as possible. We are not Adobe. Just user to user.
I have answered your most recent of the duplicates
Premier Elements 13 Organizer Works. Editor doesn't. Log in doesn't work
It is uncertain just how far we can go to help you since you do not appear to have Premiere Elements any
longer.Seems you demanded a refund from Adobe Chat, got it, and now are left with a non purchased program which I
am not sure can be used.
Duplicates tend to confuse the person asking the question as well as those attempting to reply. As I suggested in the
above mentioned thread, try to sort out your situation with Adobe via its Adobe Chat.
ATR

Using one packing instruction for several materials

Dear Friends,
I need some inputs on how to use one packing instruction for several materials.
The scenarion here is :
Many materials are packed in a similar way. If certain materials differ in only one characteristic (for example, construction), having to maintain a packing instruction for each of them results in a considerable time and efforts.
Need some valuable inputs to complete this requirement.
Regards,
Harsh

Hi.
Try with reference material for packing (MARA-RMATP). Same material number must be entered on all materials which are packed through same packing instructions.
Then you have to create/use access sequence for determination of packing instructions that contains that characteristic (RMATP).
Best regards
Milan

Report showing independent requirements for several materials

Hi
Workiing in SAP 4.7
Looking for a report where I can see independent requirements over time, for several materials, based on a time characteristic such as month/week. So for example I want to see the independent requirements for 10 different materials in a list, with the time characteristic on the horizontal axis.
Is there any such report? I am NOT asking for MD05/MD06/MD61/MD62.
Thanks in advance,
Lars
Edited by: Lars Tornblom on Apr 27, 2011 10:09 AM

Check in MD73
if you are using requirement plan then check based on requirement plan else check based on MRP controller by giving period

Recorded results of inspection lots for several materials

Hi Experts,
Can any body explain how can I get recorded results of inspection lots for several materials?
Regards,
Shivkumar Dachawar

There is no standard report. You can use the inspection report button in QA02/QA03 to generate a report on a single inspectoin lot. You'll want to modify the SAPscript provided by SAP more than likely as the one provided is provided only as an example.
FF

BOM list for several materials

Dear Experts.
is there any standard transaction that shows the BOM list of several materials, like a range or something?
Kind regards
Oliver F

Dear Oliver,
There is no standard SAP report which shows the BOM component's(Multi-Level explosion) for a list of products.
CS11,CS12,CS13 are for a single product.
Either you have to develop a Z report using these Functional Module CS_BOM_EXPL_MAT_V2 or else CSAP_MAT_BOM_READ
or else try to fetch the data from the tables MAST,STKO & STPO.
Regards
Mangalraj.S

Automatic MRP could not work for several materials

Dear Expert,
I have problem here in running MRP. Some of the materials were not automatically running MRP. While when I tried to run it manually using MD01 it works.
May be u can give me some idea why? When I tried to check the setting, i found in the table all the materials with complete status KCVDLSBGZXA are not automatically running MRP.
Is it because of that complete status setting? if yes where could i found that setting ?
Thanks
Pauline

Paulin,
MRP relevant changes can be new procrument proposel, changes done in MRP view of material, changes in qunatity for re-order planning relevant materials etc.
MRP will not done untill and unless you have entry of materials in planning files.
i am not agree with you on the point that auto MRP is running for the material for which there is no planning file entry.
another things is please , provide details of material master like MRP type etc for the material for which planning file entry is there but MRP is not considering it.
another question is , what result you are expecting after MRP run ....? i mean how you come to a conclusion that MRP is not run for few of the materils but its done sucessfully for other materials ......?
please check it again and reply.
Regards

Foreign trade data - Embargo for military materials for certain countries

We make a product that can be used in the military. We do not ship anything to UN Embargo countries, we cannot ship certain materials that are military related to a list of about 20 countries, then all other countries for these military materials require an export license.
I get how to block all UN Embargo countries for all materials and how to determine an export license by export grouping/product classification and destination country but how to I stop a sale to a particular country for a particular export group/product classification or the material group code as was suggested previously??
It looks to me like I could use the Legal control:product classification by destination country with a specific user exit.
Does anyone know if one of the standard user's exits cover this requirement or would I need to have one written?? Has anyone else done this in a different manner??
Any and all help is greatly appreciated!!
Debbie

Hi Debbie,
First of all you need to declare the country as embargo in thry T-CODE -"VE53".
Most of the settings are done in sdforeign trade customs--legal control.
Also check item category for export data in t-code "VI58".
This VI58 would effect on your item category grp in material master and hence should block the material.
Basically make most of the settings in legal control.
Reward points if it helps.
Regards
Karan
Message was edited by:
Karan Bhatia

Urgent need for Study Materials for 1Z0-114 certification

Hi All,
I would be taking up the Oracle SOA Foundations, Adoption and Implementation(1Z0-114) certification next month. For study materials & free dumps I did some search over the net but with no luck yet. Can somebody please point me towards the right direction from where i can get these. Also for reference which text books should i follow? Many thanks..
Regards,
Tripz

>
Hi All,>
I would be taking up the Oracle SOA Foundations, Adoption and Implementation(1Z0-114) certification next month. For study materials & free dumps I did some search over the net but with no luck yet. Can somebody please point me towards the right direction from where i can get these. Also for reference which text books should i follow? Many thanks..>
Regards,
TripzThe first thing the certification candidate needs to understand is there is basically no such thing as right direction and +(brain)dumps
The dumps to be found on the net, and from most non approved supplied, are non authorized learning material:
See: [http://blogs.oracle.com/certification/2009/05/the_route_you_choose.html]
So if you use or continue to search for dumps you will be cheating.
The post {message:id4015916} seems to refer to some useful books.
The thread {thread:id=833598} appears to be useful, and has been reviewed by the Certification forum moderator.
Edited by: bigdelboy on 02-Feb-2010 22:40 (typos)

Material master for packing materials for based on customers

Dear all,
       can any one tell me how to maintain material master for packing materials based on customers to whom finished goods r supplied.
Regrds
harish

Hi Harish,
Option : 1
Create your packing (VERP) material as per the Customer.
E.g.
Packing material   Product   Customer
200000000            ABC         XYZ
200000001            ABC         YZX
200000002            ABC         XZY
200000003            BCD         XYZ
200000004            BCD         YZX
200000005            BCD         XZY
Option : 2
If you are batch managed then and then only this option will work.
Create Characteristic "Customer"
- Assign it a Batch Class (023)
- Assign this batch class to the material
- Now as and when any transaction will be done on this material, you can apply the relevant customer to the batch and separate that particular by customer.
Regards,
Shyamal

Moving avergae price updation in material master for project stock

Dear All,
My query is pertaining to updation of MAP( moving average price) for project specific procurement ( as project stock) for valuated project stock.
As definelty the cost of procurement gets consumed by project .but i want to know does the project stock procurement still updates the moving avergae price or not.
Ex:-Suppose MAP in material master is 10 USD ( with qty 1)and i procure the same material ( qty 1)for project with account assignment Q for 9 USD . now will the MAP in material master becomes 9.5 USD or it remains 10 usd.?
Please reply urgently
Regards
Amit

Hi Amit,
If your Project Stock is valuated, then, the valuation data for it is stored in a different table: QBEW.
The normal, anonymus warehouse stock (the unrestricted use stock which is not assigned to any project or to any sales order) has its valuation data stored in MBEW.
The "Accounting 1" view in the Material Master MM03 ONLY displays the data of MBEW.
In the material master you will never see the valuation data of the valuated project stock (table QBEW) or the valuated sales order stock (valuation indicator "M" - table EBEW).
The valuation data for the tables QBEW and EBEW can be seen in SE16 or in the transaction MBBS.
Also note that these valuated special stocks are managed independently of the normal stock. If, for example, you change the Moving Average Price of your normal stock in MBEW, this will not have any influence on your project stock, as the data is under a totally diferent table QBEW.
I hope this helps you,
Esther.

Firefox 4 freezes for several seconds for some websites

The new Firefox 4 browser seem to have become a nightmare for me; its freezes for about 5-10 seconds while loading some webpages(not all websites).
For example webcosmo.com home page and most other pages.
cricinfo.com pages

Same problem here.
Solved by downloading & installing Adobe Flash "square" for both FF4 (plugin) and MSIE9 (ActiveX).
System: Intel Core i7-860/4GB, Win7 Ulti 64-bit SP1, MSIE 9 64-bit, FF4.
Good luck!

Collective requirement for Raw materials for the whole week during mrp ru

hi gurus,
I have a requirement like this. the raw materials required for on different requirement dates has to be clubbed together per week and one single purchase requisition for that raw material for that week. I had created a availability checking group and assigned that to check rule. then attached that in material master mrp 3 view of the material master.
If i run mrp for that product, it is not clubbing the weekly requirement instead it is clubbing only daily requirement and pr is getting generated.
can anybody give some valuable inputs so that i can proceed further?
regards,
senthil

Hi,
Try using the Lot Size: WB.
With this system wil club together all the requirements and propose a single receipt element.
Regards,
Siva

Miro service tax amount is calculating wrongly for particular materials for import PO

Dear All,
I have created import PO with three vendors like foreign vendor, customs duty vendor & Clearing Agent vendor.
After creating PO with all conditions the PO is posted and MIGO is done.
While doing MIRO there is no problem for foreign vendor and customs duty vendor (there is no service tax applicable for both)
While doing MIRO for Clearing agent vendor, we have to calculate service tax for 12.36 %.
The service tax is properly maintained in the system and its calculating correctly for all other PO's except this PO.
This particular PO has 32 materials.the values are flowing correctly from PO to MIRO but while calculating service tax the tax value is higher than the exact value.
When we do MIRO for same clearing agent with different material the service tax is calculating correctly. But if we use particular materials with same clearing agent vendor the tax amount is not calculating correctly
For example:
for Item 10
The value is 1062.72 & 12.36 to be calculated on this value.
The actual tax value is 131.35 but in MIRO its showing as 171.90. The same problem is happening with all other 31 materials.
The Info record is not maintained for all the materials. On what basis should we check for the above issue. Kindly help with your valuable inputs.
Kindly refer the screenshot.
Thanks & Regards
Subbu

Hi Ajith,
Please find the screenshot below
But for same vendor with different material in another PO the tax is calculating correctly
9050* 12.36 = 1118. 58
For this the tax is exactly calculating as 1118.58
Regards
Subbu.

Price update in costing run

Hi All,
We have 2 costing variant for the company code. Out of the 2 costing variant, we have to block one costing varimonthly price update after costing run for one costing variant.
Unchecking the option of 'Save estimate' in costing variant under update tab has resulted into blocking of cost estimate by t.code - CK11N.
Regards,
Abhishek

Hi Abhishek,
Create/Copy costing type in transaction OKKI. If you are getting an error message while creating new one, try copying the existing one to a new costing type.
As regards, assigning the new costing type to existing costing variant - I don't think system allows you to change the costing/valuation variant for an existing costing variant. You can change other parameters (date control etc.,), however.
You can copy the existing costing variant to a new one and assign the newly created costing type (with no update setting).
Hope this helps.

MR21 performance slow on price update for several materials for a company c

Similar Messages

Maybe you are looking for