MRP crtl grp entry for each network

Hi Experts
I have used the feature of creating network for WBS element. Since i need to use the network profile for several plants, i could not default the MRP ctlr group and plant in network profile.
Due to this, every time when i assign the first activity for the new WBS element, system prompts a pop up for entering the MRP ctrl group.
I have defined a common value for MRP ctlr group (EX: PS1) for all plants.
In this context, can i default the value and avoid pop up for entry of MRP ctrl grp?
warm regards
ramSiva

Hi Virendra
The Network profile will not allow entry of MRP ctrl with out specifying plant.
However i have maintained MRP ctrl in table T024D and then assigned in network profile. I need to evaluate the impact of table T024D entry.
Thank you for the solution proposal.
warm regards
ramSiva

Similar Messages

Itunes has stopped working and iphone calendar has 10 entries for each event

"itunes has stopped working", since I tried an update which failed.
Also when I plugged in my iphone it went straight to restore and not only lost all my recent stuff as you might expect - annoying enough, but has installed at least 10 entries for each event. How do I get rid of them? Tried deleting the event but it doesn't take away every single entry. (And can I get my recent stuff back?)
These are probably diffferent problems but as my name implies I'm a complete numpty when it comes to the technical terms so please, in lay terms, what should I do?

Well I seem to have solved this myself...Much to my surprise!
First the itunes issue. When the itunes update screen came up again it said if you have trouble with this go to Tools (top of itunes panel) and press "download only" which I did and the rest just sort of happened. It uninstalled and then installed.. All I had to do was open each file. Checked my stuff and all there. Checked itunes store and straight in.
Iphone calendar. Not sure how this happened but it had about 25 - 30 copies of each event. I went through each calendar and by process of elimination deleted the ones that seemed to be causing the problem. I didn't lose any events but all of a sudden there was only one each of them. Bizzaire but true.
This is a very rare day for me. A Good IT Day.

Two entries for each archive log in v$archived_log

Hi,
I have noticied that there are two entries for each archive log. Why this is so...?
I have fired following command.
==================
set pages 300
set lines 120
ALTER SESSION SET nls_date_format='DD-MON-YYYY HH24:MI:SS';
SELECT sequence#, first_time, next_time
FROM v$archived_log
ORDER BY sequence#;
==================
output is as follows.
==================
1436 24-FEB-2012 00:04:09 24-FEB-2012 08:24:21
1436 24-FEB-2012 00:04:09 24-FEB-2012 08:24:21
1437 24-FEB-2012 08:24:21 24-FEB-2012 15:45:01
1437 24-FEB-2012 08:24:21 24-FEB-2012 15:45:01
1438 24-FEB-2012 15:45:01 24-FEB-2012 15:45:04
1438 24-FEB-2012 15:45:01 24-FEB-2012 15:45:04
1439 24-FEB-2012 15:45:04 24-FEB-2012 15:45:57
1439 24-FEB-2012 15:45:04 24-FEB-2012 15:45:57
1440 24-FEB-2012 15:45:57 24-FEB-2012 17:26:41
1440 24-FEB-2012 15:45:57 24-FEB-2012 17:26:41
1441 24-FEB-2012 17:26:41 24-FEB-2012 18:40:07
1441 24-FEB-2012 17:26:41 24-FEB-2012 18:40:07
1442 24-FEB-2012 18:40:07 24-FEB-2012 19:36:17
1442 24-FEB-2012 18:40:07 24-FEB-2012 19:36:17
1443 24-FEB-2012 19:36:17 24-FEB-2012 19:36:18
1443 24-FEB-2012 19:36:17 24-FEB-2012 19:36:18
==================
Regards
DBA.

I have noticied that there are two entries for each archive log. Why this is so...?Mseberg already mentioned.. little in detail as below
Check for the name column in v$archived_log,
One location refers to Local destination LOG_ARCHIVE_DEST_1
Other location refers to your standby/DR location, But it will shows you only service name instead of full archive name.
select dest_id,name from v$archived_log where name is not null and completion_time like '%24%FEB%'
   DEST_ID NAME
         1 +ORAARCHIVE/prod1/archivelogs/arch_0001_0671689302_0000240097.arc
         2 (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=sldb1srv)(POR
           T=9101)))(CONNECT_DATA=(SERVICE_NAME=prod_sldb1srv_XPT)(INSTANCE_N
           AME=prod1)(SERVER=dedicated)))Edited by: CKPT on Feb 24, 2012 8:26 PM

Create of (demo for)OVAI (transaction for create entries for each vendor)

hi all,
can anyone plz tell me how 2 create (demo for)OVAI (transaction for create entries for each vendor)
thans & regards,
srinivas reddy.

hiii
yes you can call transaction like that..take tcode in that parameter then you can use it in your program with statement like
call transaction (variable)..in background process.
regards
twinkal

Filter Oldest Entry for Each Record

Post Author: Stephanie
CA Forum: Desktop Intelligence Reporting
I have a file that has multiple rows for each record, each with a different date. I would like to filter the report so that only the oldest entry for each record appears. Any suggestions? The report looks like this:
Record 1     01/01/07
Record 1     03/01/07
Record 1     05/01/07
Record 2     03/01/07
Record 2     05/01/07
Record 2     07/01/07
I would like the report to show this:
Record 1     01/01/07
Record 2     03/01/07
Thank you.

Post Author: Stephanie
CA Forum: Desktop Intelligence Reporting
Thanks for the suggestion, but I had already tried that and I could not get it to work. I made a variable =Min(<Date>). When I removed the other date field, my report did look like this:
Record 1     01/01/07
Record 2     03/01/07
The problem is that there are other fields in the entry that I need to display as well. Let me rephrase what my original file looks like.
Record 1     01/01/07     Product A
Record 1     03/01/07     Product H
Record 1     05/01/07     Product K
Record 2     03/01/07     Product Z
Record 2     05/01/07     Product G
Record 2     07/01/07     Product H
I want the result to look like this:
Record 1     01/01/07     Product A
Record 2     03/01/07     Product Z
When I use the min formula, I can't figure out a way to get the product information from the original record as well.

Equal Number Of Entries For Each Group

Hi,
I have been working on the problem off and on for a couple of weeks. I posted a simplified version of the question earlier and got good answers but the problem was not in the answers but how I asked the question.
My issue is this: I have a large data set with many dimensions. One of those dimensions is line number. The way the data is enter if the value for line number is zero there is no entry for that line number. So say California has 40 line numbers and Alaska has 3. This layout will not work for a project we are doing. What we need it to have the same number of line entries for each dimensions. So California would have 140 line entries with zeros for the blank entries and Alaskia would also have 140 line entries with zeros for the blank entries.
I'm using Toad and Oracle 10

Hi,
Sure, you can do that. Outer-join a table (or result set) that has 140 rows to your real table.
Here's an example of a sub-query that has 140 rows:
WITH    cntr AS
    SELECT LEVEL   AS n
    FROM    dual
    CONNECT BY LEVEL <= 140
) ...Later in the query, you can reference cntr as if it were a table. cntr.n will have the values 1, 2, 3, ..., 140.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables, and also post the results you want from that data. Simplify the problem as much as possible. For example, instead of needing 140 rows (when the actual data has only 3 or 40), say you want 4 rows, and post data that has 1 or 3 rows. You can change the numbers easily after you understand the solution.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using.

Design and Web Premium creates huge profile for each network user.

Just wondering how I can get around the Adobe Design and Web Premium creating a huge profile for each network user. When a new user logs in on the network a 6 GB Adobe Design and Web Premium folder is created in their profile. With dozens of students logging into each machine that equals dozens of 6GB folders.
Windows 7 environment.

Moved to Creative Suite Enterprise Deployment.

SQL Selecting the first and last entries for each day

Hello SQL experts,
I hope you can help with this.. I have a table (could have 1M or more rows in it) see structure below. I am looking to get the first and last date/times for each employee for each day. I also need the location GUID for the first read.
EmployeeGUID (uniqueidentifier datatype)
LocationGUID (uniqueidentifier datatype)
DateTime (DateTime datatype)
12345678-0000-0000-0000-000000000000
11111111-0000-0000-0000-000000000000
04/12/2014 07:00:01
12345678-0000-0000-0000-000000000000
22222222-0000-0000-0000-000000000000
04/12/2014 10:40:05
12345678-0000-0000-0000-000000000000
22222222-0000-0000-0000-000000000000
04/12/2014 17:04:02
44422222-0000-0000-0000-000000000000
22222222-0000-0000-0000-000000000000
04/14/2014 08:00:00
44422222-0000-0000-0000-000000000000
22222222-0000-0000-0000-000000000000
04/14/2014 14:00:03
44422222-0000-0000-0000-000000000000
33333333-0000-0000-0000-000000000000
04/15/2014 07:49:00
44422222-0000-0000-0000-000000000000
11111111-0000-0000-0000-000000000000
04/15/2014 09:00:01
This would be the ideal output (I can do without the TotalTimeInHours):
EmployeeGUID (uniqueidentifier datatype)
LocationGUID (uniqueidentifier datatype)
FirstRead (DateTime datatype)
LastRead (DateTime datatype)
TotalTimeInHours
12345678-0000-0000-0000-000000000000
11111111-0000-0000-0000-000000000000
04/12/2014 07:00:01
04/12/2014 17:04:02
Total in hours between the first and last read.
44422222-0000-0000-0000-000000000000
22222222-0000-0000-0000-000000000000
04/14/2014 08:00:00
04/14/2014 14:00:03
44422222-0000-0000-0000-000000000000
33333333-0000-0000-0000-000000000000
04/15/2014 07:49:00
04/15/2014 09:00:01
I would post what I have tried so far but I have been trying many different types of queries over the last few days. In short I need the employees first and last reads for each date. They could have many entries per date or just 1. I am certain that this
is a trivial thing for a SQL expert but not trivial for me :).
Thank you in advance!

Thank you!
This is almost what I need. The LocationGUID has to be included in the output. When I include it, I have to put it in the Group By clause. When I do that the reads are based on the LocationGUID (see below).
** I added a few more data entries and included the LocationGUID in the output.
***** SQL ***********
CREATE TABLE test( EmployeeGUID uniqueidentifier, LocationGUID uniqueidentifier, DateTimeCol DateTime )Insert into test values
('12345678-0000-0000-0000-000000000000','11111111-0000-0000-0000-000000000000','04/12/2014 07:00:01')
,('12345678-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/12/2014 10:40:05')
,('12345678-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/12/2014 17:04:02')
,('12345678-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/12/2014 19:00:00')
,('44422222-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/14/2014 08:00:00')
,('44422222-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/14/2014 14:04:03')
,('44422222-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/15/2014 07:49:00')
,('44422222-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/15/2014 09:00:01')
,('12345678-0000-0000-0000-000000000000','11111111-0000-0000-0000-000000000000','04/13/2014 10:40:05')
,('12345678-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/13/2014 17:04:02')
,('12345678-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/13/2014 19:00:00')
;with mycte as (
SELECT *, row_number() OVER(partition by EmployeeGUID, Cast(DateTimeCol as date) Order by DateTimeCol) rnASC,
row_number() OVER (partition by EmployeeGUID, Cast(DateTimeCol as date) Order by DateTimeCol DESC) rnDESC
FROM test)
Select EmployeeGUID ,Cast(DateTimeCol as date) dt,LocationGUID,
Max(Case when rnASC=1 Then DateTimeCol End) minDateTimeCol
,Max(Case when rnDESC=1 Then DateTimeCol End ) maxDateTimeCol
,Datediff(minute, Max(Case when rnASC=1 Then DateTimeCol End) ,Max(Case when rnDESC=1 Then DateTimeCol End ) )/60.0 TotalTimeInHours
from mycte
Group by EmployeeGUID, LocationGUID,Cast(DateTimeCol as date)
Order by dt,EmployeeGUID
drop TABLE test
**** OUTPUT **********
EmployeeGUID
dt
LocationGUID
minDateTimeCol
maxDateTimeCol
TotalTimeInHours
12345678-0000-0000-0000-000000000000
2014-04-12
11111111-0000-0000-0000-000000000000
2014-04-12 07:00:01.000
NULL
NULL
12345678-0000-0000-0000-000000000000
2014-04-12
22222222-0000-0000-0000-000000000000
NULL
2014-04-12 19:00:00.000
NULL
12345678-0000-0000-0000-000000000000
2014-04-13
11111111-0000-0000-0000-000000000000
2014-04-13 10:40:05.000
NULL
NULL
12345678-0000-0000-0000-000000000000
2014-04-13
22222222-0000-0000-0000-000000000000
NULL
2014-04-13 19:00:00.000
NULL
44422222-0000-0000-0000-000000000000
2014-04-14
22222222-0000-0000-0000-000000000000
2014-04-14 08:00:00.000
2014-04-14 14:04:03.000
6.066666

How do I create a chart of the number of entries for each date?

I have a table which contains bookings for an event I am running, with one row for each booking and a column for the date of the booking. I am trying to create a line chart which shows me the progress of the number of bookings over time. So the X axis would have one label for each day of the month - even if there was no booking on that day, and the Y axis would have the number of bookings, i.e. the number of rows, matching the date.
I have tried a few things without success, so I wonder if someone could help with this?
Thanks,
Nick

The top table is titled "Bookings" and the bottom table summariese the bookings by counting how many bookings fall on each day:
The bottom table:
B2=COUNTIF(Bookings :: $B, "="&A2)
select B2 and fill down as needed

Get Latest Entry for each Item

I have a table that has items with multiple entries per item. Each entry has a date of when it was entered. I want to get unique entries with the latest date. For example,
From this:
item
date
item1 12/13/2014
item1 12/15/2014
item2 12/10/2014
item2 12/19/2014
To this:
item
date
item1 12/15/2014
item2 12/19/2014
Thanks in advance.

Give this a try:
DECLARE @items TABLE (itemName VARCHAR(20), itemDate DATE)
INSERT INTO @items (itemName, itemDate) VALUES ('item1', '12/13/2014'),('item1', '12/15/2014'),('item2', '12/10/2014'),('item2', '12/19/2014')
SELECT *
FROM @items i
WHERE i.itemDate = (
SELECT MAX(itemDate)
FROM @items
WHERE i.itemName = itemName

SAp Inbox entries for each one Purchase Requisition Position.

hi everybody,
I made a workflow for a general release of a Purchase Request.
When I asked for a request in my inbox appear as many entries as my position has ordered. I just need you to see one, because I need releas a document and not by position.
Im using a user decision task.
Can someone help me.
Best Regards.

Hi,
the reason for multiple workitem in my inbox is because
I used BUS2009.
The workflow mapped to BO BUS2009 you dont want right, so deactivate the workflow.
Now Im using BUS2105... but I have a new problem... the ReleaseStepCreated
event not trigger my Workflow, in the SWEC set BANF document
with BUS2105 and my WF... to create.
PR your creating in ME51N right, 'ReleaseStepCreated' is the std. event it will trigger by default in swel once you create the PR.
For picking the approver you can use, User Exit or from Table Entries.
WS20000077 --> is the std. workflow for PR.
Regards,
Surjith

What's This Help not working for one entry in each header file

I have a large RoboHelp project that I have imported into Version 8 from a previous version. Prior to the import into Version 8, all of the What's This Help in the project was working perfectly; now, post-import, I have a problem.
Firstly, some background information.
My project contains a large number of individual header (.H) files, one for each dialog within the software. These header files, which have been generated and provided by our developers, contain one entry for each field on the dialog to which the header file relates. The header files are all contained within a \HTML Topics\Fields\ folder (going from the root of my Help project).
Each header file has a corresponding text (.TXT) file. These text files contain entries that correspond to the entries in the relevant header file. The text files are also contained within the \HTML Topics\Fields\ folder.
Below is an example of the contents of a header file:
#define IDH_HIERARCHY_APPEARANCE_HIEARCHY_LIST          16811
#define IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE         16812
#define IDH_HIERARCHY_APPEARANCE_REMOVE_APPEARANCE      16813
Below is the contents of the corresponding text file:
.topic IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE
Click this button to add a new row of hierarchical appearance settings to the grid.
.topic IDH_HIERARCHY_APPEARANCE_HIEARCHY_LIST
Use this grid to define hierarchy appearance settings. Each row in the grid represents a level of the hierarchy. For example, the appearance settings you define for the first row apply to the top level of hierarchy, the settings you define for the second row apply to the second level, and so on.
.topic IDH_HIERARCHY_APPEARANCE_REMOVE_APPEARANCE
Click this button to delete the selected row of hierarchical appearance settings from the grid.
The What's This Help that was part of the original project still works perfectly. However, after upgrading the project to RoboHelp Version 8, I have had to update the project to reflect changes to the software. As part of this work, I have imported some new header files and updated some existing ones - and edited the corresponding text files accordingly.
The What's This Help that is covered by the header files that I have imported since the upgrade to RoboHelp Version 8 does not work correctly; in each case, the What's This Help does not work for whichever field appears at the top of the appropriate text file. The position of the entry in the corresponding header file does not make a difference.
If I manually edit a text file to move a different entry to the top then recompile the Help project, the What's This Help does not work for the field that now appears at the top of the text file - and the What's This Help for the field that used to appear at the top of the text file now works.
I've tried everything I can think of to fix this, but nothing has worked. It seems as if there is a problem in the way RoboHelp is compiling the header and text files.
If I use Microsoft HTML Help Workshop to decompile the CHM file, then view the contents of the resulting, decompiled text files, the affected files appear as follows:
.topic IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE
Click this button to add a new row of hierarchical appearance settings to the grid.
.topic 16811
Use this grid to define hierarchy appearance settings. Each row in the grid represents a level of the hierarchy. For example, the appearance settings you define for the first row apply to the top level of hierarchy, the settings you define for the second row apply
to the second level, and so on.
.topic 16813
Click this button to delete the selected row of hierarchical appearance settings from the grid.
Note how the entry at the top - which relates to the What's This Help that doesn't work - appears differently to the other entries which do work. The name of the ID appears after ".topic" rather than the appropriate ID number.
Any help that anyone can provide me with would be very much appreciated.
Thank you,
Mark

Its working now. We just kept trying to reinstall the tools and restarting indesign. On the 4th time the buttons started working. I can't explain why it finally worked, just that it is working now.

Add a for each script to loop through HTTPService?

I'm using Flash Builder 4 with the Flex 4.1 SDK. I want to add a "for each" script to loop through my HTTPService XML file so only each nepName displays only once in my dropdown list. In my XML file I have multiple records associated with nepName. I would like ALL the records associated with each nepName to populate in my datagrid when it is selected from the dropdown. Currently in my dropdown there is a nepName entry for each XML tag. I hope I was able to explain that well enough. I'll try to put my code below so you can see everything I'm working with.
MXML:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:esri="http://www.esri.com/2008/ags"
               xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600"
               creationComplete="nepInfo.send()">
    <s:layout>
        <s:VerticalLayout horizontalAlign="center" paddingTop="25"/>
    </s:layout>
    <fx:Declarations>
        <s:HTTPService id="nepInfo" url="http://www.epa.gov/owow/estuaries/nep_info.xml"/>
        
    </fx:Declarations>
    <s:Panel title="NEP Project Information">
        <s:layout>
            <s:VerticalLayout/>
        </s:layout>
        <s:HGroup verticalAlign="middle">
    <mx:Form x="188" y="34" width="338">
    <mx:FormItem label="Search for NEP Information:">
    <s:DropDownList enabled="true" id="dropDownList" prompt="Select NEP" dataProvider="{nepInfo.lastResult.records.record}" labelField="nepName">
    </s:DropDownList>
    </mx:FormItem>
    </mx:Form>
        </s:HGroup>
        <mx:DataGrid id="resultsGrid"
                     dataProvider="{dropDownList.selectedItem}"
                     visible="{dropDownList.selectedItem != null}" x="20" y="62" width="1166" height="620">
            <mx:columns>
                <mx:DataGridColumn dataField="projectName" headerText="Project Name" wordWrap="true"/>
                <mx:DataGridColumn dataField="projectDescription" headerText="Project Description" wordWrap="true"/>
                <mx:DataGridColumn dataField="acres" headerText="Acres" wordWrap="true"/>
                <mx:DataGridColumn dataField="habitatDescription" headerText="Habitat Description" wordWrap="true"/>
                <mx:DataGridColumn dataField="neportCategory" headerText="Habitat Category" wordWrap="true"/>
                <mx:DataGridColumn dataField="restorationType" headerText="Restoration Type" wordWrap="true"/>
                <mx:DataGridColumn dataField="leadPartner" headerText="Lead Partner" wordWrap="true"/>
            </mx:columns>
        </mx:DataGrid>
    </s:Panel>
</s:Application>
XML: http://www.epa.gov/owow/estuaries/nep_info.xml
Thank you in advance for your help!
-Alison

($file, pwd);Assuming "pwd" is meant as the current directory, here a small example :
TEST@db102 SQL> create or replace procedure test_proc (p1 varchar2, p2 varchar2)
2 is
3 begin
4     dbms_output.put_line (p1||' '||p2);
5 end;
TEST@db102 SQL> /
Procedure created.
TEST@db102 SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
$ ls -l /tmp/test/*.sql
-rw-r--r-- 1 ora102 dba 69 Apr 18 23:23 /tmp/test/file1.sql
-rw-r--r-- 1 ora102 dba 112 Apr 18 23:23 /tmp/test/file2.sql
-rw-r--r-- 1 ora102 dba 120 Apr 18 23:23 /tmp/test/file3.sql
$ cat test_proc.sh
DIR=/tmp/test
cd $DIR
ls *.sql | while read file
do
        echo "Processing file $file"
        sqlplus -s test/test << EOF
set feed off
set pages 0
set serveroutput on
exec test_proc('$file', '`pwd`');
exit
EOF
done
$ ./test_proc.sh
Processing file file1.sql
file1.sql /tmp/test
Processing file file2.sql
file2.sql /tmp/test
Processing file file3.sql
file3.sql /tmp/test
$

Password for wireless network not remembered

I am stuck with the following situation. I have a wireless network overhere, which is a 802.1X-type network which consists of a huge number of different base stations connected together, which requires me to login and has TTLS (PAP) type identity control.
When I configure this into the Internet Connect application, with my password, it connects. However, on reboot, the Finder immediately asks for my password. When I look in Internet Connect, it's still there, but when I look in System Prefs, the password is not there (only a blank field). When I enter it, click OK, and check the dialog again, the password is already gone into the wind.
I deleted all entries of the network in all my keychains, reinstalled my system and now I've set the keycahin entry for the network accessible by all programs, but that doesn't help me either. I had a Macbook here not long ago, which didn't suffer from this problem (however, it did not reconnect after sleep/reboot all the time, but never asked me for my password).

Do not check "Remember Networks this computer has joined."
In Advanced>Preferred Networks, enter the name of your Network. This is how I have mine set up and I have not experienced any more problems like yours, although I did in the past. In Preferred Networks, I have redundantly entered the same name twice, just in case it skips off to the second one. Probably not needed, but it's been working fine like that for a long time.
However, since I don't have an Airport Extreme, I don't use Airport Utility. Definitely try rebooting the AE. Might try applying or reapplying the 10.6.8 Combo update.

Cash Position - Entry for accounts with balance zero

Hello Guru,
is there a possibility to see in my cash position one entry for each account, which is included in the structure, even if the balance of the corresponding account is zero. At the moment I get no entry for accounts whose balances are zero.
Best regards
Phillip

I had posted a OSS note for the above question and SAP says that the FF7A report with the option 'Delta display' will (that is SAP's intention) display 'with balance' in the first and last column and 'without balance' in the other columns.
So when we run the report today we should use 'Current day minus 1' in the 'display as of ' field. so that in the second column we can see today's transactions without balance. That works for me.
Thanks to all who replied to my posting.
Kalyan.

MRP crtl grp entry for each network

Similar Messages

Maybe you are looking for