MS 6163 bx master not compatible with Win XP

Hi !
Yesterday i changed the HDD, installed the windows xp sp2... and here we go again with the old problems since the windows xp come out.
My pc often greeze, lock Up and i have to reset it. In the event viewer there is an error under the system that said:
AMLI: ACPI BIOS is attempting to write to an illegal IO port address (0xnnnn), which lies in the 0xXXXX - 0xYYYY protected address range. This could lead to system instability. Please contact your system vendor for technical assistance.
The motherboard is acpi complaint, but the problem is that the Bios is not compatible with windows xp. It is very sad thet the manufacturer did not make changes to the biso so the people with retired motherboards can still use it without problems.
There is a way to fix this, but it will still freeze in time to time, but not so often. The problem about acpi will be corrected, if you change to non - acpi complaint system and then install NT/APM legacy support to shut down windows properly.
I noticed that doing that, the system is not working so fast then when was acpi complaint. also some strange little noises come out from the motherboard expecialy when i move the usb mouse. I dont know what to say, but its sad. I still have this pc althought its so old. If only the bios can be comaptible....
If you computer's BIOS tries to write to a port in ACPI Machine Language (AML), you will receive similar errors. Windows NT-based computers, including Windows XP and Windows Server 2003, do NOT allow these operations as they can cause instability.
To resolve this problem, contact your manufacturer about a BIOS upgrade.
I so on the internet on a photo of the motherboard that there is a jumper J1 that can lock write to bios ? anyone know what is it ?
In the manual there is no explanation or mentioned J1 jumper....
Please make the bios stable for me

Hi !
Without overclock ? yes I also tryed this. It is the same problem. When windows xp come out it brings with it this problem of Bios.
For now I am running windows without acpi support as I said. This will correct the error... but I will se in next weeks how it will work. I have the new HDD now. On the old one i got some bad clusters and mybe this caused freezing althought i disabled acpi. With acpi enabled my pc would freeze every 10 minutes... To eliminate the freeze related to acpi error, the only solution is to disable acpi support, since there is no BIOS available ti fix this problem.
Sure.. it is possible that also my ram will cause pc to freeze in time to time. I noticed that where there is 4 slots for sdram, there is also a RED lightning led. I check the manual , but there is no explanation of this led. I dont know why it is red and not green. I dont even know what colour should be. This led is located next to the ram slot.
The noises that i mentioned...are comming from the PSU.... It is a new one. The precedent one was the same one and also new and i return it to change it for another of the same manufacturer (same model also). heh also this one turn out that it cause strange noises. mybe is not so silent as they said.

Similar Messages

Sound Card not compatible with WIN 7

I have a Dell 8200 Dimension Desktop (vintage 2002)?that I?ve just upgraded from XP Pro to Win 7. My Turtle Beach sound card no longer works since it is not compatible with Win 7. When I tried to install a non-Dell sound card, I found that the two sockets were not compatible with the Dell cables. I was told that I must have a Dell card since the plugs were proprietory Dell. I was given a Dell part number (38FRH) which supposedly was the card that would work as a replacement, i.e., be compatible with Windows 7. Dell no longer stocks this card since they stop supporting their computers after they are 5 years old.
Can?anyone help me solve my problem?

Which Dell cables? To the speakers? If so, time to change the speakers then.
Also try online such as eBay. Google for "Dell 38FRH". Ignore the Windows 7 drivers links. First few I found were fakes/scams. Scroll down. On the first page there were a couple of sites that carried it.
I would rather change the sound card [get something "modern"] and speakers than continue to use proprietary stuff.
Using Win 7 on an 8 year old system? Yeeesh.

Satellite L505-10z - Win 7 tools are not compatible with Win 8

My laptop is Satellite L505-10z. I installed Windows 8 Pro and I notice that lots of drivers (especially TVAP) I downloaded from Toshiba support website (which are originally for Windows 7) not working! When will Toshiba release Windows 8 drivers? Will my model be included in the driver updates?
Thanks

> downloaded from Toshiba support website (which are originally for Windows 7) not working!
Win 7 tools and utilities are made for Win 7 and not Win 8
> When will Toshiba release Windows 8 drivers? Will my model be included in the driver updates?
I think you should ask Toshiba. This is user to user community.
But I think Toshiba would start with driver support if Win 8 would be available OFFICIALLY on the market.

Acrobat 8 Pro not compatible with Win 7 Pro 64

When I changed from Win XP Pro to Win 7 Pro I could not transfer Acrobat 8 Pro. Adobe Support just informed me that Acrobat 8 Pro was not designed for Win 7 and that's it. This was pretty frustrating and gave me the opportunity to search the market. I am going to switch to PDF Suite that is coequal to Acrobat but hundreds of times favorable in price!

Support gave you the correct answer. The new underpinnings of Windows 7 makes it impossible for Acrobat 8 to function properly. It should not surprise you that new OSs require new software. Acrobat 9 is very nice software, you can get an special upgrade price from 8 to 9. Acrobat 10 is likely to be available real soon now. There are many programs available to create pdfs. Office can do so natively. If that is all you need then Acrobat may not be for you. However, for some there is nothing quite like Acrobat.

Adobe CS 5 Is not compatible with Win 7

I just had an unbelievable 45 min discussion with the 'Expert' support of Adobe. I am trying to install CS 5 on a new computer after receiving the download link.
I encountered an error while trying to install and asked the 24 hour support to help. You wont believe the enaswer I got.
He told me that CS5 cannot run on Win 7 and sent me a link that I had to read.
I told him that its working Ok on my other Win 7 computer, and that the instructions he sent me says that IT DOES work on Win 7
UNBELIEVABLE SUPPORT...!
In the end I insisted that he pass me a supervisor who was no real help at all
He told me I cannot use the CS5 on another computer.
I then showed him the transcript from a previous support session where the person told me I could
He then said it was possible but that they dont support the CS5 anymore
This chat session was going from bad to crazy
Do these guys know the basics of Adobe? (Rhetorical question!)

Hi Magila,
I apologise for the inconvenience.
CS5 has not been tested on Windows 7 and you might face compatibility issues with it. What the chat agent meant was you can go ahead and install CS5 on the OS but Adobe will not be responsible nor support issues arising due to unsupported and untested platforms.
BTW what error do you get while trying to install CS5?
Please try installing the software in compatibility mode and check ( http://social.technet.microsoft.com/Forums/windows/en-US/cdd894f8-1ee2-43e5-952b-d04c25779 a7f/how-to-install-a-software-application-using-compatibility-mode?forum=w7itproappcompat )
You might also want to follow the below mentioned basic steps :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Regards,
Rave.

ITunes 10 not compatible with Win XP SP3?

My wife's Dell is running Win XP (32 bit) with SP3, has most of the recent Microsoft security updates, MS Office 2007, and the 2011 version of McAfee. It is rather "plain vanilla" in its configuration, so I don't expect any conflicts with the Win version of iTunes.
With iTunes 9.2.1.5, her computer & iTunes work fine. I thought I'd try the suggested upgrade to iTunes 10.4.1. It downloaded and installed OK. However, upon the next reboot of the computer, ended up at the black screen and could only restart in safe mode. Repeated restarts, only could get to safe mode though.
I restored her computer from a disk image, and it ran fine until I tried to upgrade to iTunes 10.4.1 again ... same thing, can only boot to safe mode. I repeated this process a couple more times with different versions of her system's disk images, all run iTunes 9.2.1.5 OK, but crash with an iTunes 10.4.1 install. I also tried this with and without running Norton Win Dr. & Disk Dr. (not running Norton antivirus, rather McAfee) to clean up the registry and system files, but same results.
Is iTunes 10.x.x only for Vista or Win OS 7? Is there some known Microsoft update or setting that conflicts with iTunes 10.x.x? Does iTunes 10.x.x not play nice with McAfee or any of its security features? Is there some level of Windows security settings that could cause this?
I'm OK with iTunes 9.2.1.5 for now, but don't want the next Apple device that requires a newer iTunes version to break her computer. We wish to stay at Win XP SP3 as both our work computers use XP and our same current level of program revisions, so we don't want new issues (plus time & cost) going to Win 7 just for the sake of iTunes 10.
Thanks in advance for any thoughts.
PS: I personally use a MacPro at home, but that is not a current option for my wife (just saying this in advance for those who's fix will be to "get a Mac" :-)

Why not update your OS to 10.6?

Lenovo Solution Center not compatible with Win 8.1 ?

After teh Windows Update on November 16th ... The soltuions center display a critical error syaing theat my Windows was never updated !?! Any other having this bug ? I wonder what prevents my Solution Center software from reading the update history !!! ...

Hi Griggs1,
Welcome to the HP forums!
I see you're having issues getting the Solution Center to work with your new Windows 8.1 laptop. I'm sorry to hear this, but with a bit more information I'd be happy to lend a helping hand
1. What model HP printer do you have?
2. Is the printer connected via USB or wireless?
3. Are you able to run the scan even though the Solution Center says the printer is disconnected? (I only ask because I've seen it many times!)
4. Have you tried downloading and running the HP Print and Scan Doctor yet? If not, please try that and let me know what it has to say! If it fails anywhere, just let me know where it fails.
5. Did you install the printer using a download?
Once I have this information I will certainly do my best to have a deeper look into things!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

JSP Server is not compatible with Win XP Service Pack 2

i've install java serve into my comp system with the following specification:
Operating System: Windows XP Service Pack 2
Processor: Pentium 4,1.60 Ghz
RAM:256
Database: Microsoft Access 2003
The PROBLEM are:
Page with .jsp extension cannot be diaplay, when it's come to .html/.htm there is no problems at all.
Why this kind of problems occur is it because of the my comp. spec or because of Jave server didn't suite with XP Service Pack II...
I TRIED SO MANY TIME BUT THE OUTPUT IS STILL THE SAME!!!

i've install java serve into my comp system with the
following specification:
Operating System: Windows XP Service Pack 2
Processor: Pentium 4,1.60 Ghz
RAM:256
Database: Microsoft Access 2003
The PROBLEM are:
Page with .jsp extension cannot be diaplay, when it's
come to .html/.htm there is no problems at all.Right, because the OS launches the browser and it renders the HTML.
Why this kind of problems occur is it because of the
my comp. spec or because of Jave server didn't suite
with XP Service Pack II...This makes no sense.
I TRIED SO MANY TIME BUT THE OUTPUT IS STILL THE SAME!!!You think you should be able to double click a .jsp file and display it?
Tell me, what should be launched when you do this?
This is not the way to run .jsp files. You need to deploy them in a web app on a servlet/JSP engine and submit HTTP requests to that app server from a browser. You cannot double click on a JSP and display it.
Repeat: It can't be done.
%

Is Adobe Story CS6 Compatible with Win 8?

I am about to install Windows 8 Pro and it says that Adobe Story has a "paid" update to win 8. Is this so? I have Adobe Master Collection CS6 and Adobe Story is included. It does state that my "collection" is good. I am confused about this for sure.
It also says that Adobe Media Player is not compatible with Win 8. Will this effect my Master Collection CS6 functionality?
Thanks in advance.

One of the differences between the Creative Cloud and the Master Collection is that application updates are included. I am unsure about the status of the version of Story included in MSCS6 and the latest one available. Which came with your MSCS6?

Encore CS4 not compatible with Windows 7 [32] ?!

just reinstalled Windows 7 [32 - ultimate] and Adobe CS4 Master Collection and I get this error message each time I try to start Encore: "Encore is not compatible with this version of Windows" I had it installed before, worked perfect, till now. when I force it to start it goes only till Import as asset, then it freezes, shows a blue screen, then the computer restarts. any suggestions?

Hi,
As you mentioned that you are using Encore CS4 on win 7. There was an issue with Encore CS4 being used on win 7.
There might be the case that the pxhelp is not compatible with win 7 (64 bit)
Install latest pxhelp from -
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/ 000070GN&PARAMS=
This has solved the problem of lot of people. I hope it works for you also.
Let me know if it solves your problem.
En CS5 and 5.1 are shipped with the correct version of pxhelp engine.
Thanks,
Ramesh.

A1-830 not compatible with windows 10

Received message that tablet not compatible with win 10 due to intel graphics media accerator. Any one else receiving this message?

Uh... An A1-830 is an Android tablet, not Windows.

Error: Platform version 6.0 is not compatible with minVersion = 6.0.2 maxVersion = 6.0.2 so what do I do? Using Win 7

Error: Platform version 6.0 is not compatible with minVersion >= 6.0.2 maxVersion <= 6.0.2 so what do I do? Using Win 7 Home Premium

If you use ZoneAlarm Extreme Security then try to disable Virtualization and do a clean reinstall.
* http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
*[[/questions/869812]]
*[[/questions/869951]]

Provider is not compatible with the client

Hi,
I'm new to this forum so I don't know if this prob was already posted.
It might be something that i misunderstood.
My application VB.NET is connecting to Oracle 10g database.
Using client from the ODAC 10.2.0.2.21 installation file.
DB version is 10.2.0.1.0
Even before connection is open application throws an exception:
The provider is not compatible with the version of Oracle client at Oracle.DataAccess.Client.OracleInit.Initialize()
Any ideas?
Thanks for help ;O)
Nice day to everybody.
Renata Belakova

Thanks
1, I'm developing an application on Win 2003 Server with Ora10g DB 10.2.0.1.0
2, I developed an application in VS.NET 2005, VB.NET
3, Application works OK on develop. PC
4, my PC name, IP and DB name are the same as customers
5, i published application and went to install it on customers PC
I was thinking about the same environment on developing and customer PCs.
then i went to customer to try application on their LAN
1, They have DB server with the same version of DB and the same name of DB and the same name of server as i got
2, firstly I've installed ora client on customer computer not server
I've used ODTwithODAC1020221.exe file and installed client part
3, set up listener on clients comp
4, installed .net application on this client comp
5, run and got exception i wrote in previous message
Im really not an Oracle professional. I'm a .NET developer but fist time in my life developing application under Oracle DB (mostly was using Microsoft SQL ...)
So I don't know if these steps were OK .... but it's what i've read.
Thanx ...

After upgrading to 10.0.2 I get "Error:Platform version 9.0.1 not compatible with 10.0.2" and I have to reinstall ver 9

I'm, running WinXP Sp3. I downloaded 10.0.2 and installed it as an upgrade as I have done successfully with all other new versions. It installs, but when it tries to load I get the following error: Platform version '9.0.1' is not compatible with minVersion >= 10.0.2, maxVersion <=10.0.2. I then have to run Win Uninstall, and then reinstall 9.0.1 to be able to get back online.

If you use ZoneAlarm Extreme Security then disable Virtualization and reinstall Firefox.
See:
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
*[[/questions/880050]]

The saved printer information is not compatible with this version of Photoshop

Hello,
I hope somebody can help us. I am a IT Technician in a school, we have approx 500 Windows 7 64bit machines with about 600/700 users - 200 machines have the CS5.5 Master Collection installed on them. We have an intermittent issue with printing from Photoshop (both the 32bit and 64bit versions). Our printers are mostly HP LaserJet printers (all modern), but we have an Epson B-510DN Inkjet and some Xerox copiers too. The drivers are all installed on a central print server running Server 2008 R2 and shared via Group Policy to client machines.
In rooms where Photoshop is installed, intermittently when a student goes to print we will recieve the following error:
The saved printer information is not compatible with this version of Photoshop, or the saved printer is no longer available. You will need to check your printer settings before printing.
Photoshop will then grey out the 'Print' button and won't let the user print again. The odd thing is that we can still print from other software such as Microsoft Word or even non Microsoft software - even Illustrator will print. It just seems to be Photoshop thats has any issues.
This happens when printing to any printer on site, 90% of which are HP's. As a general rule we configure all of our HP printers with HP's PCL6 Universal Print Driver as it makes management of various printer models easy, and we haven't found it to limit us atall yet. We are aware the Adobe software is 'preferential' to Postscript drivers but our printers arn't, being HP's PCL is their native language. We have tried changing a printer to the Postscript UPD driver to test it but it made no improvement. We have also seen the issue quite indepth with our Epson B-510DN which is configured with Epson's latest model specific driver as our photography department use it. Since we are seeing it with different printers I don't believe the printer drivers are to blame - unless somebody want's to prove me wrong.
Like I say the problem is intermittent, and we are having trouble tracing it down to a user, computer or a software problem as it is so intermittent. Has anybody else seen this and managed to overcome it? Since it's only happening in Photoshop is it a bug that Adobe have recognosed and fixed in CS6? The only workaround we have found for it is to go into printers, chnage the defualt printer from one to another and back again - this seems to shut Photoshop up.
Thanks, Dave.

Chris,
Apologies for my slow reply - we have been busy here the past few weeks.
We are using a standard Microsoft provided JPG image (Tulips.jpg) so we have ruled out it being an issue with the image; perhaps if we were using a PSD, maybe so.
We have now found out what the issue is, and what the workaround for this bug is. All of our printers across our site are named in a specific format, usually [Location name] [Room number] [Mono or Colour] resulting in printer names such as Photography A11 Colour, Art A2B Colour and Design Technology A14 Colour. All of these names contain numbers. We have tried reimaging machines, reinstalling Photoshop, upgrading to CS6, deleting and reconfiguring printers with the same name. Finally the only solution that worked was to take the numbers out of the name, either by renaming or deleting and reconfiguring the printers. The Photography printer is an Epson B-510DN using a model specific driver and the other two use the HP PCL6 UPD driver, so I don't believe the drivers are to blame and since renaming the printers work I don't believe it's a configuration issue either. Remember that these printers are shared from a print server and deployed via Group Policy (using the Print Management method).
I hope this provides you Chris, and others searching Google, a useful explanation of the problem and what the fix is. As much as Adobe won't admit it's a problem/bug, I and many others across the internet believe that it is and that it should be fixed in future versions of Photoshop.
Thanks, Dave.

MS 6163 bx master not compatible with Win XP

Similar Messages

Maybe you are looking for