MS control characters being added

Contribute 3 has just started adding the ^M to the end of
each line in the code. Is there a way to stop this? I have been
really trying to keep the code as minimalistic as I can (I use vi
but have recently been given an assistant that will be using
Contribute). I see the ^M in vi editor. How can I stop Contribute
from adding these? Thank you!

This is to do with the jms framework.
The 2 ways to get the payload out of the message resulted in 2 different sizes of payload being delivered.

Similar Messages

JMS Null Characters being added to payload

Hi.
I have an application which produces jms messages to a queue.
Every message I have created seems to have 4 NULL characters pasted onto the end of the payload.
I am experiencing the same issue with deployed applications and those just connecting to the jms server from a different application outside of Netweaver.
This has only just started happening, and everything was working ok before this happened - has anyone any pointers at all??
Im very confused as to why this would happen.
Update: It also only applies to BytesMessages as TextMessage is ok.
Regards,
Andrew
Edited by: Andrew Morton on May 15, 2008 12:14 PM

This is to do with the jms framework.
The 2 ways to get the payload out of the message resulted in 2 different sizes of payload being delivered.

How to stop control characters from being tokenized?

In Oracle 11.2.0.3
I have documents which has embeded Arabic and so there is a control character \u202b to indicate right-to-left string. How do I stop these kinds of control characters from being tokenized. Doing a search with CONTAINS(search_string,' \u202b')>0 finds documents. Do I just add the '\u202b' as a stopword?

What lexer are you using, Amin?
I assume from what you say that the characters are getting indexed as whole tokens? If so, adding them as stopwords should work, but I'm surprised they're getting indexed at all - sounds like a fault in the "alphanumeric indentification" code to me.
I'm going to take a guess this is the World Lexer. Am I right?

Every single website, or link within a website page is being added to my location bar/address bar drop down menu. How can I stop this? This just started happening.

Every single website url address, or url address within a website page is being added to my location bar/address bar drop down menu.
I don't want everything added or saved in the location bar. Only urls that I used a lot used to be saved there but now every single url (and url within a url)I visit is being added to it.
How can I stop this? This just started happening.
I'm sure it's a simple browser setting but I've checked and nothing gives an option to control this.
Firefox 3.0.17
Windows XP
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.17) Gecko/2009122116 Firefox/3.0.17

A possibility is to open the links via the right-click context menu or a middle-click in a new tab to make sure that Firefox sees them as regular links.

I keep getting the message on iTunes that my Shuffle (which is current on updates) needs to be restored. It is showing up in devices, but when I try to add songs to it, I don't get the little progress bar showing me that the song is being added. ***?

I updated to the new iTunes last week. Today I plugged in my 4th generation Shuffle to add some new songs. The shuffle appears in Devices, but when I try to add songs, I'm not getting the progress bar at the top of the screen, so I'm assuming the song isn't being added. I tried ejecting the Shuffle and plugging it in again, and I got a message that my iPod needed to be restored before it could be used with iTunes -- even though the screen also said the Shuffle is up to date on the software. I finally gave in and restored it, but I continue to get the same message. When I eject the iPod and try to play it now, I'm getting nothing, and when it is connected to the usb port, the orange light is continually flashing. I've been trying to figure this out for about 3 hours now, so if anyone could help me, I'd be eternally grateful!

The 1st and 2nd gen shuffles do not have an automatic syncing mode, like later shuffles and the "big" iPods. It is maintained manually (or by using the Autofill feature).
If the iTunes sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar. The shuffle appears in the sidebar, under DEVICES, when connected.
To add songs to the shuffle... Show a list of songs in the iTunes window. For example, you can select Music under LIBRARY (in the sidebar) to show your complete iTunes music library list. Select a song and drag it to the shuffle in the sidebar. You can do this with more than one song selected. Alternately, select the song(s), right-click the selection, and choose the command to Add to Playlist -> [name of iPod].
To remove songs from the shuffle... Select the shuffle in the sidebar. To the right, it's Settings screen is shown. Toward the top, where it says Settings, click on On This iPod (to the right). The list of songs on the shuffle is shown below. Select the song you want to remove and press Delete on the keyboard. You can do this with more than one song selected.
NOTE: At the bottom of the shuffle's list of songs, there are controls for the Autofill feature. You can also use Autofill to fill your shuffle from your music library or from a specific playlist.

Special characters being read from the unicode file for greek language

Hi All,
I have a report which would upload a unicode file and then update the vendor master data accordingly.
The file contains greek characters too.
when the file is being read in the code, some special characters are being added up to the vendor number which is the first entry. The special characters are not included in the file , but are added up only to the first vendor number and not any other vendor numbers.
The logic that is being used is as follows :
TRY.
      IF unicode IS INITIAL.
        IF codepage IS INITIAL.
*-->      For backward compatibility where this FM might be called from
*         other dependent objects (FMs/dynamic subroutines)
*         which donot have access to user's input w.r.t Unicode parameters
          OPEN DATASET filename FOR INPUT
               IN LEGACY TEXT MODE
               MESSAGE msg
               REPLACEMENT CHARACTER repl_char
               IGNORING CONVERSION ERRORS
               FILTER filter.
        ELSE.
*--> System in non-unicode and Unicode Environment (Phases I and II)
          OPEN DATASET filename FOR INPUT
               IN LEGACY TEXT MODE CODE PAGE codepage MESSAGE msg
               REPLACEMENT CHARACTER repl_char
               IGNORING CONVERSION ERRORS
               FILTER filter.
        ENDIF.
      ELSE.
*--> Extract File in Unicode format - Phase III
        OPEN DATASET filename FOR INPUT IN TEXT MODE ENCODING UTF-8
        MESSAGE msg
        FILTER filter.
      ENDIF.
      IF sy-subrc NE 0.
        MESSAGE e001(zuni) WITH filename sy-subrc
         RAISING file_open_error.
      ENDIF.
the unicode parameters used are : codepage = 8000.
An early reply is most appreciated.
Regards,
Manu.

Please check SAP notes for Eastern European Characters in Unicode system. and may be below code helps you
DATA:
    ltp_bom                  TYPE sychar01,
    ltp_encoding             TYPE sychar01,
    ltp_codepage             TYPE cpcodepage.
Processing --------------------------------------------------------- *
TRY.
      CALL METHOD cl_abap_file_utilities=>check_utf8
        EXPORTING
          file_name         = itp_filename
          max_kb            = -1
          all_if_7bit_ascii = abap_true
        IMPORTING
          bom               = ltp_bom
          encoding          = ltp_encoding.
    CATCH cx_sy_file_open .
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
              RAISING file_open_error.
    CATCH cx_sy_file_authority .
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
              RAISING file_authority_error.
    CATCH cx_sy_file_io .
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
              RAISING file_io_error.
ENDTRY.
CASE ltp_encoding.
    WHEN cl_abap_file_utilities=>encoding_utf8
      OR cl_abap_file_utilities=>encoding_7bit_ascii.
      CASE ltp_bom.
        WHEN cl_abap_file_utilities=>no_bom.
          OPEN DATASET itp_filename FOR INPUT IN TEXT MODE
            ENCODING UTF-8.
        WHEN cl_abap_file_utilities=>bom_utf8.
          OPEN DATASET itp_filename FOR INPUT IN TEXT MODE
            ENCODING UTF-8
              SKIPPING BYTE-ORDER MARK.
        WHEN cl_abap_file_utilities=>bom_utf16_be.
          ltp_codepage = '4102'.
          OPEN DATASET itp_filename FOR INPUT IN LEGACY BINARY MODE
            BIG ENDIAN CODE PAGE ltp_codepage.
        WHEN cl_abap_file_utilities=>bom_utf16_le.
          ltp_codepage = '4103'.
          OPEN DATASET itp_filename FOR INPUT IN LEGACY BINARY MODE
            LITTLE ENDIAN CODE PAGE ltp_codepage.
        WHEN OTHERS.
          OPEN DATASET itp_filename FOR INPUT IN TEXT MODE
            ENCODING UTF-8.
      ENDCASE.
    WHEN OTHERS.
      OPEN DATASET itp_filename FOR INPUT IN LEGACY TEXT MODE.
ENDCASE.
Edited by: Nilesh Shete on May 7, 2010 5:29 PM

Hidden control characters in file generated by AppleScript?

Hi all,
I've come across a strange problem. I have an AppleScript app (kindly produced for me by a member here) that gets called up by cron, which puts up a dialog box at regular intervals asking me to write down what I am doing (to create an activity log). The log is saved to my Documents folder if it doesn't already exist; otherwise my typing will just get time-stamped and added to the file.
This has been working just fine for several months (years), and now, all of a sudden, AppleScript konks out on me -- it simply crashes. The reason, I discovered, is the log file itself. It gets inflated out of proportions (something like 2.5 Megs where 40K would suffice) because it contains hidden control characters (gremlins) between each letter and zillions of them between words and lines.
When the script opens this inflated file, TextEdit balks ('Application not responding'), which in turn crashes AppleScript.
I discovered these gremlins when I opened the document in Classic mode with Word 5, which allows me to remove them and thus make the file smaller and therefore palatable to TextEdit again.
But that doesn't solve the problem: Every entry continues to be inserted with another load of gremlins, and I can't understand why. I deleted preferences both for TextEdit and AppleScript, and I perform regular disk maintenance.
TextEdit is set to save plain text files, end-of-line is Macintosh style, character set is Western Mac OS Roman. It's always been like this before when it worked ok.
Any ideas?
Thanks in advance.
G4 MDD 1.25 GHz, 768 MB RAM Mac OS X (10.3.9)

Hi Camelot,
The script doesn't specify TextEdit -- it just creates/updates a text file which I then read with TextEdit. Here's the script, and below is the link to the test log:
--STARTOFSCRIPT------------------------------------------
-- Find out if the log file is actually there.
-- We can't get the last entry of a file that doesn't exist.
set fileExists to false
tell application "Finder"
if exists file "MacHD:Users:gisela:Documents:Gisela'sActivityLog.txt" then set fileExists to true
end tell
-- Get the last entry in the log file to present to the user.
-- If the file wasn't there, present a default choice to the user.
if fileExists then
set myLogFile to open for access ((path to documents folder as text) & "Gisela'sActivityLog.txt")
set logFileContents to read myLogFile using delimiter return
close access myLogFile
set lastLogEntry to last item of text items of logFileContents
set oldTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to tab
set lastEntry to text item 2 of lastLogEntry
set AppleScript's text item delimiters to oldTIDs
else
set lastEntry to "Nothin' much."
end if
-- Ask the user what they're doing.
set myLogEntry to text returned of (display dialog "So... What're you doing?" default answer lastEntry buttons {"OK"} default button "OK" with icon note)
-- Get the date and time via "Do Shell Script" (for me, easier than mucking with AppleScript's date results).
-- Modified order to Year Month Day# Weekday hour:min:sec [Gisela]
set dateUnix to do shell script "date"
set dateText to word 8 of dateUnix & " " & word 2 of dateUnix & " " & word 3 of dateUnix & " " & word 1 of dateUnix & " " & word 4 of dateUnix & ":" & word 5 of dateUnix & ":" & word 6 of dateUnix & " " & tab
-- Open a log file on the desktop. The file is created if it doesn't exist.
set myLogFile to open for access ((path to documents folder as text) & "Gisela'sActivityLog.txt") with write permission
-- Write a log entry into the file.
write dateText & myLogEntry & return to myLogFile starting at eof
-- Close the log file.
close access myLogFile
-- Script by Bryan K. Vines, Corpus Christi, TX, via Apple Discussion Forum 22/5/04 and 24/5/04
--ENDOFSCRIPT------------------------------------------
Here's the test log => http://www.webalice.it/gisela/TestLog.txt. Had to change the name because my webspace doesn't like apostrophes (').
This phenomenon only occurs in connection with this Activity log script. My gut tells me it's not AppleScript's fault, but I can't figure out where else to look.
Kind regards,
Gisela

How to stop email addresses from being added to contacts

hofw do you stop email addresses from sent emails from being added automatically to contacts?

No. They are not being created by the phone. They are being created by your mail system, whether that is Exchange, Yahoo, Google, etc. They all have settings to automatically create contacts from people you correspond with. There is no setting on the phone to control this. Check the settings for your mail account with or talk to your IT department.

Item has already been added. Key in dictionary: '???' Key being added: '???'

Since 1 week I am unable to access any of the Sharepoint 2010 sites that exist in my farm. The error that is shozn is:
Item has already been added. Key in dictionary: '???' Key being added:
Here is the stacktrace:
[ArgumentException: Item has already been added. Key in dictionary: '???' Key being added: '???']
System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add) +10065554
System.Collections.Specialized.StringDictionary.Add(String key, String value) +89
Microsoft.SharePoint.SPWeb.GetProperties() +563
Microsoft.SharePoint.Utilities.SPPropertyBag..ctor(GetProperties getProperties, UpdateProperties updateProperties) +62
Microsoft.SharePoint.SPWeb.get_Properties() +130
Microsoft.Office.Server.Utilities.PageUtility.GetPagesListName(SPWeb web) +39
Microsoft.SharePoint.Publishing.PublishingWeb.get_PagesListName() +152
Microsoft.SharePoint.Publishing.CachedArea..ctor(PublishingWeb area, String id, String parentId, CachedUserResource title, String url, CachedUserResource description, CachedObjectFactory factory) +3914
Microsoft.SharePoint.Publishing.CachedArea.CreateCachedArea(PublishingWeb area, CachedObjectFactory factory, String parentId) +590
Microsoft.SharePoint.Publishing.CachedObjectFactory.CreateWebFromUrlNoUpperCase(String url, Guid webIdHint, String urlCaseHint) +555
Microsoft.SharePoint.Publishing.WebControls.ConsoleUtilities.IsMasterPageGalleryUrlForSite(Uri uri) +117
Microsoft.SharePoint.Publishing.WebControls.ConsoleVisibleUtilities.ConsoleAppliesInCurrentContext() +41
Microsoft.SharePoint.Publishing.Internal.WebControls.PublishingRibbon.OnLoad(EventArgs e) +95
System.Web.UI.Control.LoadRecursive() +66
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2428
Also, when I am trying to access my homepage on the root sitecollection, I see this error:
The DataSourceID of 'V4QuickLaunchMenu' must be the ID of a control of
type IHierarchicalDataSource. A control with ID 'QuickLaunchSiteMap' could not
be found.

Recently have you removed, deleted, changed password of any account used in sharepoint.
Check in > Security > Manage account
Check in IIS > Application pool, if any pool is stopped.
If you have a old copy of web.config files, check if they were modified.
Was any new solution\wsp deployed in farm
please share ULS logs, event viewer and fiddler traces.
If this helped you resolve your issue, please mark it Answered

Controlling the HTML added by Oracle Reports

Hi,
I'm having a problem with the HTML being added to the output of my report when it is run on the web. Oracle Reports seems to add all these table tags and a buch of other HTML tags that are not really needed. The tags do not affect the output of the HTML, but it does affect the way the output is saved if you do a save as into a text field. I have done some test and found if I can get Oracle reports from adding all that extra junk that is not needed, the report would run great.
So the main question here is how can I control the HTML tags Oracle Reports adds when it creates HTML output.
Thanks,
Tom

Jimmy,
I canâ tell you which product is better in your situation. HTML DB is used to develop applications, so reporting is just one of many features. But based on what you want to create, HTML DB would be a suitable tool for this task. You can create reports, link to those reports, link from report rows to other pages. Let users specify a number of parameters that can be used in the where-clause of your queries, etc. There are limitations of course, especially if you have some advanced printing needs. But since you already have licenses for all Oracle products, Iâd suggest you give it a try and see if HTML DB meets your needs.
Regards,
Marc

Wrong ASCII values for control characters in Variables and Stack Call in CVI2013?

Hi,
I think there is an error in "Variables and Call Stack" window if you want to look for your variables in ASCII format.
The control characters (0 - 31) are not shown correct. They are shifted 2.
For example:
Character in Decimal format is 10 (LF) but when you are chancing to ASCII format it is showing \012.
The same with 13 (CR). This character is \015 in ASCII format.
I think that was no problem in CVI2012.
Best regards
Gunther
Solved!
Go to Solution.

I'm not using CVI2013 yes so I cannot respond regarding this specific product, but the code you are showing are the octal equivalent of the decimal value you specified: it could be that control characters (or generally speacking non-printable ones) are replaced with their octal equivalent in string view.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Event Receiver:Item is Being Adding Event Recevier Issue

Hi All,
* I had written Simple event receviers(Item is Being Adding) to a site at FarmLevel(Farm Solution) and below is the code for it.
* In below code I am adding the List name to a Column called "Name" ,when Item is being adding the code is getting loop and inserting unwanted data and updating Column "Name" with it instead of updating when item is added
*Below if u see there is no value in Column "Name" when I insert values "Mark Devis"(Title) and "In Meeting"(Body) columns
Can any one help me how can I solve the issue
       Code:
string listitle = properties.List.Title + "" + "is List Name";
string siteurl = http://sp2010:8080/personal/Sample/;
using (SPSite mysite = new SPSite(siteurl))
using (SPWeb myweb = mysite.OpenWeb())
SPList mylist = myweb.Lists["Announcements"];
SPListItem newitem = mylist.Items.Add();
      newitem["Name"] = listitle.ToString();
      newitem.Update();
Result:
Samar

Hello Samar,
Try to use before/after properties to update item in list on ItemAdding event.
http://sarveshspn.blogspot.in/2010/05/using-itemadding-and-afterproperties-to_08.html
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/1ed217b1-9441-4fe1-b3aa-68b2768bdfc7/updating-list-item-value-on-the-itemadding-event-handler-of-an-item-receiver-class?forum=sharepointdevelopmentlegacy
Also make sure that you have at least contributor right in list to edit data.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Preventing help files being added to start menu after installing an application in windows 8.1 enterprise

Hi Guys
when we install an Application in windows 8 family, we see that in addition of Application executable file, user manuals (.chm) and PDF & other files related to that App are added to start menu (when we click down Arrow which shows all programs) and
so the start menu gets quit messy.
is there any settings to make only applications executable file be added to start menu & prevent other types of files related to that App being added here?
thanks in advanced

Hi John,
This issue is related to the programs package we installed.
• An installation package contains all of the information that the Windows Installer requires to install or uninstall an application or product and to run the setup user interface.
• The developer can specify installation context, and based on these properties, Windows Installer automatically redirects the values of folder properties and registrations to locations.
• The shortcut is added to the profile by these context
We could right click these file and could find out they are the shortcut mentioned above.
For more information about Windows Installer, please refer to the following article.
http://msdn.microsoft.com/en-us/library/windows/desktop/dd765197(v=vs.85).aspx
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support
hi Fangzhou
useful link
thanks a lot

AppleScript puts control characters in txt file, inflating it enormously

Hi all,
I've come across a strange problem. I have an AppleScript file that puts up a dialog box at regular intervals asking me to write down what I am doing (to create an activity log). The file is saved to my Documents folder. This has been working just fine for several months (years), and now, all of a sudden, AppleScript fails on me. The reason is, the log file is inflated out of proportions because it contains hidden control characters (gremlins) between each letter and zillions of them between words and lines. Opening one of these files makes TextEdit go crazy ('Application not responding'). I discovered these gremlins when I opened the document in Classic mode with Word 5 (the best application ever to have been produced by MS, which allows me to remove them and make the file palatable to TextEdit again).
But that doesn't solve the problem: Every entry continues to be inserted with another load of gremlins, and I can't understand why. I deleted preferences both for TextEdit and AppleScript, and I performed regular disk maintenance.
TextEdit is set to save plain text files, end-of-line is Macintosh style, character set is Western Mac OS Roman. It's always been like this before when it worked ok.
Any ideas?
Thanks in advance.
G4 MDD 1.25 GHz, 768 MB RAM Mac OS X (10.3.9)

The solution to my problem can be found in the AppleScript forum here:
http://discussions.apple.com/message.jspa?messageID=2353871
With many thanks to reese_, who provided the solution, and to Tom, who directed me there!

How do I identify which control is being hovered over?

Hello all,
I have a simple feature of my code I am working on. I want to have a detailed help box ( a little more detailed than the tooltip popup option) with instructions I want to print on my screen.
The idea is that when I have an active control, the instructions will print in a small text box to give people guidance on my program.
This works for half of what I want to do.
But in the case of a custom toolbar, I do not have that ability since I cannot click inside of it like a textbox.
I am using the tooltip, but I would like to be able to print a better, more detailed message in my help box.
Ideally what I would like to know if there is a function to be able to get which control is being highlighted or hovered over by panel and control id.
It's no big deal if there isn't one, but now I am curious.
Veni Vidi Duci

Hi,
if EVENT_GOT_FOCUS is not suitable for you another possibility could be to use a timer callback, and for every timer tick call GetRelativeMouseState (panel, 0, &x_coordinate, &y_coordinate, NULL, NULL, NULL); this will return the current position of the mouse cursor on the panel. To make use of it, at the beginning of your program you need to obtain the positions of your UI controls, e.g. using GetCtrlBoundingRect ( panel, control, &button.top, &button.left, &button.height, &button.width ). Then you need to check if the mouse is within a bounding box by comparing the mouse coordinate with the control coordinate...
But why are the tooltips not working for you?

MS control characters being added

Similar Messages

Maybe you are looking for