MSA and MI 7.1
Hi
I want to implement MSA using MI 7.1 as a middleware. Some thread mention that is possible, but do I need to deploy some files on DOE for it?
Does any one have any doc. about MSA 5.0 on MI 7.1?
Thanks
Dear Efrain,
Any current Mobile xApp release (as of 10Feb 2009) can be implemented directly only on NetWeaver Mobile Infrastructure 7.0/2.5 as middleware app server.
If you already have it implemented in your landscape (2.5/7.0), it can be migrated to work with the inbuilt compatibility layer of a new Installation of NetWeaver Mobile 7.1.
There is no current release of any Mobile xApp which can be directly implemented to take advantage of all the advantages of the DOE.
I think the above confirms, clarifies and solves your question.
Regards,
Veera
Similar Messages
-
Hi Gurus,
We have a scenario wherein, we have MSA and CIC implemented.
I am writing a report where i want to identify from where has an order been created.
How can i do this.
Full points for helpful answersHi,
Its very simple.
Look for the field INPUT_CHANNEL in table CRMD_ORDERADM_H
The following values can be taken:
GUI CRM Server
IAC Interaction Center
ICW Interaction Center WebClient
EXS External Source
ISA Internet Sales
PSA Portal Sales
MSA Mobile Sales
PDA PDA
In your case it would be IAC, ICW or MSA
Kindly reward with points in case helpful
Sharif -
Hello all,
I would like to know if is possible (any limitation or impediment) to install in the same laptop, the MSA (Sales) and MSE (Service) Mobile Applications ?
Rgds,
FábioAnswered in Mobile Forum
-
All You Need to Know About MSAS and Voyager (Hopefully)
Post Author: chemstoc
CA Forum: Olap
There seems to be several problems with trying to connect Voyager to Microsoft Analysis Server Cubes.
We have struggled with this for several weeks and I hope to both get answers and document the steps that are required to make this connection work.
We run MSSQL Server 2005 on an XP machine in the development environment (Cheap!) and have had no issues connecting to the cubes with other software (Notably Targit and Excel, etc.) When we try to attach BOXI Voyager in the Productivity Pack, we cannot get the OLE connection to log in to the server.
We are not sure if it is because it is connecting to an XP machine? Or there isn't sufficient "rights" on the XP machine? Or BOXI requires the "ANONYMOUS" user to be setup in the security tab on the MSSQL Management console?
Any help from any of you that have ACTUALLY gotten this Voyager connection working would be tremendously appreciated.
CliffMake sure you have entered your Voyager licence code in CMC.
I'm using BOXI R3. but is same for BOXIR2 Make sure you have defined a voyager connection in the CMC.
in here you need to specify
Server type: Server
Server: your SSAS 2005 server name
then click the Connect and type a user ID with appropriate authority to the cubes.
then select the cube you want.
then specify:
Authentication: User Specified
User: Authorised user
Password:
Click Save.
You then should be able to create a new Vouager workspace from the infoview.
Hope this Helps (ive got about 20 cubes accessed by Vouager... not such a flash viewer but its the only thing BO offer. OLAP intelligence (a good product) is no longer available! -
MSA. Activities and Sales Organization
Hello Forum,
Do you know if there is a related table of SMOVBKA for Sales Organization data for an Activity. I'm having Sales Org Unit determination issues and I've made the test of deleting all Sales Org related data in SMOVBKA with no change in MSA or GUI (after running Conntrans of course), therefore I'm guessing there is another table storing this information. Any clues?
All help is appreciated!
Regards,
Gerardo Van der MolenHi Gerardo
During the integration process of Mobile Sales and CRM Enterprise some questionary decisions were made, one was to keep the SAP ERP orgmodel in MSA and also in parallel have the HR-like orgmodel in CRM server. So this is why MSA only supports VKORG, VTWEG and SPART (and VKBUR / VKGRP) as organisational data.
However, when you delete data on a CDB table like the SMOVBKA, there is no possibility to see the changes anywhere else in the system! The only way is to delete the orgdata via the application or in the server via a BAPI, because otherwise the creation of a BDoc for data exchange does not happen.
Welcome to the wonderful world of SAP Mobile Sales ... there is also a special forum for MSA here.
Regards, Kai -
Customer Interaction Center -- MSA
Dear Colleagues,
The scenarion is:
Sales Representative has created Activity (Meeting) in MSA. By default logged in user will be taken as fuction "Sales Representative" in 'Person responsible' tile. I have added one more employee in this tile as fuction "Person responsible".
So till here, sales rep has created activity in MSA and deligated this to one employee.
Now as a employee, I go to CIC (customer intreaction center) screen and I would like to know what all activities are assigned to me by my sales representative. Is this possible?
I can not see ant option to search my activities.
Please do guide.
Regards
Milind
I am trying to search with gI'm not sure about the way CIC works.
But you should be able to search this activity using transaction CRMD_BUS2000126 (activity maintenance).
In partner dropdown select particular partner (sales rep or person responsible), select particular employee as search criteria and you should be able to find that activity.
Regards,
Kaushal -
Service Accounts for Browser Services and FD Launcher (Full-text Search)
I am setting up SQL Failover Clustering (Version: 2012SP1) on Windows 2012. There are 2 options to configure the service account for Browser Services and FD Launcher :
Option 1) Using separate domain accounts, as what I have done for DB Engine and SQL Agent.
Option 2) accept the default, which is local service for
browser, and virtual account for
FD Launcher. Per documentation URL: http://msdn.microsoft.com/en-us/library/ms143504.aspx
which is the recommended one? is it option 2?
There is security note on above URL as well, but does not clearly mention that option 1 is not recommended.
Security Note: Always run SQL Server services by using the lowest possible user rights. Use a
MSA or
virtual account when possible. When MSA and virtual accounts are not possible, use a specific low-privilege user account or domain account instead of a shared account for SQL Server services. Use separate accounts for different SQL Server services. Do not
grant additional permissions to the SQL Server service account or the service groups. Permissions will be granted through group membership or granted directly to a service SID, where a service SID is supported.Hi Luo Donghua,
In SQL Server Brower, the default logon account is NT Authority\Local service and cannot be changed during SQL Server setup.SQL Server Browser is not a clustered resource and does
not support failover from one cluster node to the other. SQL Server Browser should be installed and
turned on for each node of the cluster. SQL Server Browser should be run in the security context of a low privileged user to minimize exposure to a malicious attack.
You can change the account after the setup has been completed; For more information, see:http://msdn.microsoft.com/en-us/library/hh510203.aspx.
In SQL Server full text filter daemon launcher, on Windows Vista and Windows Server 2008, the FDHOST Launcher service account also defaults to LOCAL SERVICE. If you provide a domain account in which to run the FDHOST Launcher service, we highly recommend
that you use a low privilege account. On Windows 7 and Windows Server 2008R2 , we use Virtual Account or Managed Service account(MSA) in FD Launcher . We also need to note the account you used for
FD Launcher should be different from the account that you use for the SQL Server service. For more information, see:
http://msdn.microsoft.com/en-us/library/cc281953(v=sql.100).aspx
So I recommend you use the option 2 to configure the service account for Browser Services and FD Launcher.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
Hi,
We are doing a PILOT for UNX using MSAS Cubes.
I Installed SQL Server 2008R2 on my machine and downloaded the default Adventure Works DB, DW and also the related MSAS Project which has built in cubes.
I successfully deployed the MSAS project using MS Visual Studio which has 2 cubes on to my local machine.The Database I used for this was the DW I had downloaded earlier.
Now from IDT when I am trying to connect to build a UNX on top of the default cube. I am getting the following error.
com.businessobjects.mds.olap.protocol.xmla.internal.XMLAException: java.net.ConnectException: Connection refused: connect
Any Help is Appreciated.
Best
Monty.http://scn.sap.com/thread/3614377
Hi Monty,
Do you help me this subject now? Did you solve this problem?
& Have you got a document about its ?
Note:I want .abf cubes in MSAS and create a universe in idt.
Kind regards.
Fatih Temiz -
CRM 5.0 MSA - create new sBDOC
Dear Gurus,
we are working with CRM 5.0 MSA and we must create the new sBDOC custom.
Can you, please, we indicate the documentation or example about new sBDOC?
Thank you very much,
MaddalenaEasy! BAPI_CLAIM_CREATE.
-
MSA dump After total generation
Hi experts,
I did some developpment on my MSA and generated successfully with "generate chages" and build the solution with "generate the solution" : it's working fine and i see my changes.
But wen I want to do a full generation, MSA start correctly but crashe after my login and give me an error message :
- creation of logon object failed
- starting MSAfailed
My sfabol dll is created but with a version 0.0.0.0 which is kindly wired and doesn't wants to register itself with "regsvr32 .../sfabol.dll"
Do you have any ideas of what i'm doing wrong ?
thx for help
Best regards
Edited by: Julien DESGEORGES on Feb 24, 2009 12:13 PMHi,
it is hard to analyze what is wrong with your system but I would suggest to do the following:
- generate all BDocs with client console
- synchronize all BDocs within Dev Studio
- perform a full generation for MSA/MSV with option "delete previous content", but NOT selecting "use incremental generation"
- build the project
- register all DLLs in bin.net with regsvr32 which are NOT dot.net DLLs (e.g. by using register.bat)
- check whether the ODBC source for IDES is consistent (or try to open other apps like MSY)
Regards,
Wolfhard -
Account Dimension not showing all members in the cube in Analysis Services
Hi,
In SAP - BPC 5.1 after processing account dimension all the members are created under account dimension in analysis services but the same cannot be found in the data cube. Hence the reports generated through SAP - BPC is not showing all the members.
The issue looks very strange as we can see the members getting created but the same is not getting populated in the cubes. I am not able to visualize what exacly the issue is? Is it with the application or with the analysis services?
Thanks
SharathYour sixth sense is correct, there is definitely support in MSAS and BPC 5.1 for multiple hierarchies in the account dimension.
I'm also referring to parentH1 and parentH2, but perhaps we're still speaking of different things.
In the past, I faced a very similar problem as you, and the root cause was because I had one member, let's call it FancyParent, which, in H1, had children Child1 and Child2.
But in H2 it had children Child1, Child2 and Child3. I forget now if that was how I wanted the setup to be, or if it was a mistake on my part, but either way, MSAS doesn't allow this. The admin consol didn't complain when processing the dimension -- this was in Outlooksoft 5.0; perhaps validation has improved now.
But the cube was completely unworkable. Certain things were calculating correctly, but everything in the account dimension in the area around FancyParent (above and below it, in both hierarchies) was quite unpredictable.
By disabling first one, and then the other, of the two hierarchies, and disabling blocks of accounts, I was eventually able to pinpoint the problem. But it took days to figure out what was the problem. (The account dimension had 2500 members and 4 hierarchies, and it was not a pretty sight.)
A parent must have the same definition of children in all hierarchies. It can't, as another example, have children in H1, and be a base member in H2. Each member can have different parents in the two hierarchies, but must always have the same children in both.
To work around this problem, I had to create two separate accounts NetIncomeH1 and NetIncomeH2 (and PretaxIncomeH1, PretaxIncomH2, etc. all the way down to the point where they branched off), to get the two separate aggregations of the P&L in the two hierarchies. Once I did that, it made sense to me why, but I also swore off on frivolous extra hierarchies ever again. -
Error while saving config in MSY
Hi,
I am working on taking MSA 5.0 SP7 go-live. I am working in MDW. I posted a SDN post long back regarding the custom partner functions in MSA and got it resolved (followed the note 521871). I am trying to do the same in the PROD system and i am facing errors:
-> When i goto Cross-Component Settings->Relationship Categoty-> click on NEW i am getting the errors:
1. 'MTBLLFW-The attribute destination of the business object
relation type is not valid'.
2. 'MTBLLFW-the attribute source of the business object relation
types is not valid'
But it is allowing me to add an entry. When i save my customer entry i am getting the error :
3. 'UI_CORE_SAVE_FAILED_STA-Errors while saving'.
I ran the consolidated prefill for 5.0 and SP07. I followed the same procedure as i did in DEV. In DEV i never got these errors. I was able to create them in the first attempt.
If anyone has any idea please let me know.
Thanks in advance,
Karuna.Hi,
did you already check i.e. compare the customizing subscriptions for both DEV MDW and PROD MDW sites?
Also you should check & compare the download monitor for CDB load in the CRM system(s).
I assume sth is missing there (see also your other post).
Regards,
Wolfhard -
Service Accounts for Reporting Service in SQL Server Failover Cluster setup
I am setting up 2 Report Services (SSRS) in SQL Failover Clustering (Version: 2012SP1) on Windows 2012, as part of scale out architecture.
There are 2 options to configure the service account for SSRS:
Option 1) Using domain accounts, as what I have done for DB Engine and SQL Agent.
Option 2) accept the default, which is virtual account for SSRS. Per documentation URL:
http://msdn.microsoft.com/en-us/library/ms143504.aspx
which is the recommended one? is it option 2?
There is security note on above URL as well, but does not clearly mention that option 1 is not recommended.
Security Note: Always run SQL Server services by using the lowest possible user rights. Use a MSA or virtual account when possible. When MSA and virtual accounts are not possible, use a specific low-privilege user account or domain account instead
of a shared account for SQL Server services. Use separate accounts for different SQL Server services. Do not grant additional permissions to the SQL Server service account or the service groups. Permissions will be granted through group membership or granted
directly to a service SID, where a service SID is supported.
Thanks very much for your help!Hi Luo Donghua,
In SQL Server Failover Cluster Instance, personally two options can run well. If you use the virtual account for SQL Server Reporting Service. Virtual accounts in Windows Server 2008 R2 and Windows 7 are managed local accounts that provide the features to
simplify service administration. The virtual account is auto-managed, and the virtual account can access the network in a domain environment.
Of cause, you can also use domain accounts in your clustering.
Just make sure your service account is set up here, or that it is using a proper built-in account.For more information, see:http://ermahblerg.com/2012/11/08/cluster-ssrs-in-2008/
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
Hi All,
mu understanding is that E-Sourcing comes with its own reporting capability, I have a couple of questions relating to this that hopefully someone can answer.
1. Where does the data for the reports come from? i.e. does it pick up spend analysis from SRM and ERP?
2. Can the data from E-Sourcing be extracted to BW so that all data from SRM, E-Sourcing and ERP is in one place?
Thanks
ChrisHi Chris
Answers to your questions
1) Operational data from Backend systems (SRM or ERP or non-SAP backend) is required to run some of the reports in Spend Analysis in SAP E-Sourcing, the consulting note 111567 has more details on what types of operational/transactional data is available in the standard set of interfaces delivered vide the consulting note, the consulting note is availed only if you have the on-premise or hosted licenses. On its own SAP E-Sourcing can provide you reports that require only data from within its tables (specifically for Projects, RFx and Contracts(limted to MSA and legal contracts)
Please look into your RG guide me for a standard list of reports available in SAP E-Sourcing 5., i'd be able to assist you
But for spend analysis, these are some of the reports
-Cumulative Spend by Commodity
- Spend by Commodity overtime
the list is huge......
2) Yes the data can be extracted from SAP E-Sourcing in excel, CSV and can be pushed to BW to ensure that Reports niche to the organization are developed if not covered by standard procurement reports in BW.
Hope this answer was useful
call me for anymore clarifications required
Regards
Tridip
+91-9902764700 -
Hi,
I am new with MSA and trying to analyze synchronization-problems.
Opportunities that are created on a client which is connected with the workgroupserver do not reach the client of the "person responsible" (the sales responsible) everytime.
We cannot find any mistakes (red bdocs, hanging queues or something like this).
Putting the transaction into the outbound-queue by changing anything in the opportunity does not solve problem.
Is it possible, that it is a problem in partner-determination?
What I do not understand is that the problem does not occur for all created opportunities but just for a few.
I hope someone of you can help me!
Thanks
ThomasHi,
the R&R table name depends from the template which is used for CRM functionality, in your case HT = High tech, that is ok (CG would be consumer goods).
Did you also find an entry in /1CRMGC/HTOPPRRL for this particular site which seems not to be working?
- If for other sites there is an entry concerning this OPP but not for this one then sth regarding the subscription must be wrong
- If the R&R table looks fine then I rather would suggest to desubscribe this subscription, wait till R&R has been finished (check Tx smohqueue) and subscribe again
Besides this: Did you already check the local IDES table smoobjekt for this missing OPP?
Regards,
Wolfhard
Maybe you are looking for
-
How do I download attachments from Facebook to my iPad Air???
Hello, how do I download attachments from Facebook [messages] to my iPad Air?? I have a PDF file I would like to download, but there's no options/button for me to press and start downloading. PLEASE HELP!
-
How to build dynamic query strings in the query using DB adapter 'Pure SQL'
Dear Forum, I am building an application which will access DB to fetch some result set. The query involves retrieving data from multiple tables(nearly 10 tables). So I have created a DB adapter using 'execute pure sql' option. With this query works f
-
Hello All, I made some changes to tansformation for calculation of some keyfigures from one DSO to another. The changes were calculating the keyfigure correctly. But in the target DSO the 0CALDAY is selected as a key field, due to which the records f
-
Overview of used keywords in AP3 - how?
Is there an easy way to get an overview of the used keywords and the number of photos tagged by a particular keyword in AP3?
-
How do I get images of movies to show on the ipad video selection screen.
All I get are the titles and a black box showing theres something there but I would like to see an image. My daughter cant read so she cant choose by picture..