MSI ATI X800XL Problems

I seem to be having real bad graphic lag when i try to play a game.

Computer spec is
Operating System: Windows XP Professional Service Pack 2
Ram: 1024 DDR2 533 PC 4200
Graphic Card: MSI ATI Radeon X800XL DDR3 256mb
Sound Card: SoundBlaster Audigy 2LS
Power Supply: 450W Duel Neon Fan
Lan: 1 GB
Graphic Interface: Pci Expressx16
Processer: Intel Pentium 4 3.4 GHZ with HT Technology.
IDE: Maxtor 80GB Hard Drive, Duel DVDR/RW =/- CDR/RW

Similar Messages

MSI K8N NEO 2 platinium and ATI X800XL

SYS SPEC
CPU - AMD 3200+
MB - MSI K8N NEO 2 PLATINIUM
AGP -ATI X800XL
PSU- ANTEC TP2 550
HD - SEAGATE 80 GB SATA
DVD - ASUS DVD ROM
RAM-KINGSTON PC 3200 DDR 1 GB Dual channal .
My sys was running fine since 7 months i built this set up . some how it gives me bluescreen when it was on idle
I was using 7.1 ati drivers since it came out . my psu voltages are fine and my agp temp is 44 c idle . Never overclock the system . Cpu temp idle 40 . load 54. I Went to
save mode and clean the driver using dc pro and reboot it comes fine and i again installed the drivers . same
bsod happens again went into save mode opened device manager and see 8 yes 8 readon x800 installed and
having yellow mark on it . after that i reset cmos with battery out for 15 minutes . reformat my drive completely
installed freind ATI 9200 SE . when installing the driver for it. it gave me the error of installing the standard vga
driver before installing the ati driver which i did not understand and quit the setup . SYSTEM runs fine with safe
mode or normal windows xp with no driver installed for agp .Also did reinstall the x800xl and reboot same 8
GPUS installed in device manager . uninstall all of them and reboot again same thing in device manager .Another
thing i have done is to run anti virus on line scanning before HDD format it came out clean .Tryied several versions of drivers including 6.9, 7.1. 5.4 . I never seen this
kind of problem before in any forum as far as i read . HELP ME OUT IF ANY ONE CAN . THANKS

Quote from: ASIF BROHI on 28-February-07, 01:16:41
I reformated the drive two days ago when this problem occurs also used dc pro in safe mode and reboot and install the agp drivers again same problem after that . yup i installed the chipset drivers too ver. 5.10
Did you install the chipset drivers before the vga drivers?

MSI ATI Radeon X800 SE 256MB DDR3 TV-Out/DVI (AGP) problems

i recently purchased a MSI ATI Radeon X800 SE 256MB DDR3 TV-Out/DVI (AGP)
it says it can automaticlay download new bios etc using MSI live update,
but when i click on VGA Bios, it says my card does not do this??? how do i check the bios and if there is a new one available?
any ideas?
ive heard you can unlock the MSI ATI Radeon X800 SE 256MB DDR3 TV-Out/DVI (AGP)
from 8 pipes to 12 pipes, how do i do this
also any idea on what the best drivers are for a MSI ATI Radeon X800 SE 256MB DDR3 TV-Out/DVI (AGP)
catalyst?
omega?
MSI std drivers?
thanks

Jobbie,
The best Drivers for your Vid Card are the ATi Catalyst Drivers.
Take Care,
Richard

Help - ATI x800xl with CD30" video probs. win xp

Hello,
I have a new Win XP PC With a ATI X800XL PCIe card and the Cinema Display 30" monitor. Everything works well except windows media player. the videos are viewable but the colors are bright floresents. DVD movies work perfectly.
any ideas would be greatly appreciated.
Greg

Hi
I've also got problems with displaying video on a Cinema Display 20", from dvds and realplayer etc
quicktime is ok until the viewing image turns green
any Help ?
Regards
Guy

MSI (ATI) Theater 550 Pro has fuzzy and quiet sound and perfect picture

I have just brought an MSI (ATI) Theater 550 Pro. It is connected to the antenna on the roof, and I am located in New Zealand (PAL) if that makes any difference. I have previously had problems with MPEG2 codecs, not that I see how that could be related.
My problem is that although I get a perfect picture, I do not get any sound. If I turn the sound up to full volume, I can just make out the beat of the music on TV in the fuzz that is outputed.
I have:
Windows Media Center 2005
MSI (ATI) Theater 550 Pro

Ok, that was a bit simpler than I expected.
I just downloaded a new ATI driver (from ATI site)

MSI Ati Radeon HD4850 512MB CrossFireX

Hi all! My name is Mark, and I've made a topic about how to make RAID 5 on a MSI Platinum DKA790GX
I have a new problem, a few days ago, acquired another HD4850 512MB MSI Radeon exactly equal to that already had, to fomar a CrossFireX, the thing is that this all wrong, and not to do ... I explain how procedures
first of all, connect the new video card to see if it worked and if it works perfect, then connect the 2 video cards to the motherboard, and connect the 2 bridges CrossFireX then lit the computer, and perfect, I noticed dispostivos administrator, and the 2 plates are recognized each other, so here we go perfect, then I went to AMD Vision Engine Control Center, to enable CrossFireX and I went out no option, nothing at all to enable CrossFireX I set if 2 plates were activated, and are disabled, the primary adapter is active, but the other says Disabled Adapter, and do not understand that in the device manager are the two ... Well, I started aa look everywhere solutions and had not, they said that previous drivers again, what I did, but none worked, none tell me the option for CrossFireX ... try using a single CrossFireX bridge but does not work, update the BIOS of my motherboard is a MSI DKA790GX Platinum, and I do not see any option to enable CrossFireX, uninstall video card drivers, use Driver Sweeper to remove the root ATI drivers, and install new ones, and try the old and I do not work ... and do not know what else people did it all, yesterday was Saturday from 2 pm until 1 am and I still can not solve the problem, I need help getting to ride these two video cards, not how , probe around as you can see, and I can not think of anything more!!!
please if anyone can help me, I would be grateful now!
My PC specifications:
Motherboard: MSI DKA790GX Platinum, GPU's: MSI ATI Radeon HD4850 512MB x2, RAM: 4GB RAM Dual-Channel Kingston, CPU: AMD Phenom x3 8650, Power Supply: Cooler Master 750W Plus, x2 Samsung 500GB Hard Disk x2 Western Digital 500GB Hard Disk , RAID 5 System Mounted

Well folks, I have all things settled, the final version I have served for the AMD Vision Engine Control Center was the 11.12 version of the Radeon drivers, which let me install all your applications, also I did a change in Bios, I had updated to version 1.G0 and now go to 1.20 which is older, but has no more errors! so here I have all walked to perfection, with gta 4 walk at 60 fps, and later the only thing I need is to buy 4 more GB of RAM, and RAID 5 disk partition I have for windows 7 64 bit, to have all optimized to 64 bits, since all the components of my pc are for use at full 64-bit, ie, would travel faster, for example, more FPS in games!
although I had no answer, and I had about 20 visits, no matter, thank you xD Like
I send greetings to all from Argentina!
Goodbye!
Gamertag: Markitoo22

MSI ATI radeon can't detect 2nd monitor

the monitor is on & working but neither Windows Hardware or the ccc detect it.
here's what I have-
Dell inspiron 530 w/ intel core(2) duo procssor 4Gb ram @ 2.20GHz
Windows Vista Home Premium sp2
MSI ATI Radeon 6450
Belkins f3006-01 vga splitter
monitors are 2 similar Gateway vga/dvi monitors.
all I want to do is extend the screen or slide pop-up windows to the 2nd screen for digital audio recording software(DAW). NO GAMING.

A closer reading of the safire 7950 Mac edition site (link above) says they want to see a Mac Pro 4,1 2009 or better.
System Requirements
Mac Pro with Mac OS X 10.7.5
CD-ROM or DVD-ROM drive for installing software
Mac Pro with Mac OS X 10.8.2 or later
2 GB RAM, Early 2009 Mac Pro (MacPro4,1)

MSI Ati Radeon HD4850 512 Mb. & AMD Radeon HD6850 1GB GDD5 CrossFireX Possible?

Hello everyone! In this new topic, I'll try to capture a doubt that I have a few weeks ago! The question is this, I have a video card MSI ATI Radeon HD4850 512MB and XFX Ati Radeon 6850 1GB GDDR5, and my question is whether these two plates can be joined to form a CrossFireX, ie the two plates running in simultaneously. I had the opportunity to read in other forums, there are people who form a CrossFireX, with the video card that comes in the motherboard, ie onboard plate ... I can say? From already, thank you very much!

this probably will not work, the card is too old
http://sites.amd.com/PublishingImages/Public/Graphic_Illustrations/WebBannerJPEG/AMD_CrossfireX_Chart_1618W.jpg
don't even see any 4xxx in the list

MSI ATI RX 9600XT saying it has an rv350 chipset

I Have an MSI ATI RX 9600XT
in the information report from tray tools it says
Display adapter Radeon 9600XT (4152)
Core Name RV350
The GPU speed is 500mhz so it must be a RV360
Am i losing performance or functionality due to this?

Hi, if you want you can use Everest home edition to check everything related yo your vid card. And I guess your benchmark is ok, remeber 3D mark 03 test CPU too, and it uses and overall, if your CPU is not really powerfull your Benchmark have to be low compared with other systems with the same vid card and fasters CPU's.
And I guess that this is related to the company which produced the vid card.
Here you can see what I'm telling you, each company can use one chip or other, but not in the case of 9600XT which in your case must be RV 360 :
Radeon 9600: RV350/RV360
AIW Radeon 9600: RV350/RV360
Radeon 9600 Pro: RV350/RV360
AIW Radeon 9600 Pro: RV350/RV360
Radeon 9600XT: RV360
AIW Radeon 9600XT: RV360
About the GPU speed you're card is fine, 500 MHz is the right frequency for XT models, whereas Radeon 9600 Pro is only 400 MHz, or Radeon 9600 is 325 MHz.
Maybe Everest would give you the answer. Or if you want to see which one is, take the Heatsink off and check the Chip, off course remember to apply some thermal grease after checking.
Best regards

MSI ATI Radeon 1800 GTO

If anybody have msi ati radeon x1800 gto please upload your original bios!

Quote
A Vid Card is not a Mobo, there is little to be gained on a Vid Card by Modding or Flashing the BIOS for any reason. Do what BK said.
Well, that's not true as you can gain a lot by modding a vid card by bios if you know what you're doing of course....
hammer_ns, if MSI tech can't help you try with a different manufacturers bios as those x1800GTO's are all just standard design. If you need one pm me.

P-2120t + MSI ATI Radeon HD6450 1 GB?

P-2120t
Win7 Home 64
Currently have standard on-board graphics ...wondering if adding a MSI ATI Radeon HD6450 1 GB card will improve the video in any significant way. Can pick one up for $32.
Thx.

Such a Radeon HD 6450 is offered as an upgrade for your pc:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03188862&cc=us&dlc=en&lc=en&product=5193517
But OEM-cards can differ in the specs from marketplace cards, AMD says that the card requires 400W psu:
http://www.amd.com/us/products/desktop/graphics/amd-radeon-hd-6000/hd-6450/Pages/amd-radeon-hd-6450-...
You have to try ... maybe you have to upgrade psu too.
*** Say 'Thanks' with Kudos ***

MSI ATI READON R9 270X VGA game code not received

Hi,
I bought a MSI ATI READON R9 270X VGA , the offer said I will get two games but I didn't receive any code inside the box.
The card was bought on 21-Jun-2014, I would like to know how should I go about it.
Any help would be appreciated.
Thanks.
Regards,
Gaurav Singh

Quote from: flobelix on 25-June-14, 21:54:27
Contact MSI about it: >>How to contact MSI.<<
I already did , but no one replied.
And I have registered my card in products registration but all I got was a xsplit premium account 6 month subscription.
I also sent a mail to technicalindia@msi,com but no one replied.
Is there any other way to contact them?

MSI & ATi Radeon

Hi!
I am very curious if MSI is planning to manufacture ATi based cards...
Asus did it and now they manufacture nVidia and ATi in the same time...
I think it's a good move because buyers will have a better choice... some like nVidia, some don't... but they all love MSI... so those who hate nVidia can just buy MSI ATi... I think it would be great...
What do you guys think?

not as far as im aware they were going to a while back and then changed their minds
as far as im aware they did built some ati cards for mendion and thats been it
mendion are a large german pc maker ,they were however not for sale seperate

Ati driver problem linked with HP on Dutch win7 Pro

Hello,
There are 2 notifications that show up about having display adapter problem and Ati driver problem .
Is there a solutions ?

Please upload a copy of your system information file. Click "start" , type "msinfo32" , Click "file" at the top of the page, select "export" and give the file a name and click "save" .
Navigate to where the file was saved to, and upload the generated text file to a public folder on your OneDrive account and post the link here.

[Radeon] MSI ATI Radeon x800xl 256MB PCIe

Has anyone else had issues with this card crashing??? It's been happening to me quite a bit. I've heard it's possibly the PSU, but I don't think that's the case here. I'm using the Antec 550 True Control 2 (24pin connector, 19A on each +12V rail) for the MSI K8N Neo4 Plat SLI board.
Thoughts/Ideas?
Thanx in advance!
-Jay

Hi Deathstalker,
I initially was just curious if anyone else was experiencing the same thing, just to get a dialogue going. Generally speaking, it's very hard to gauge the knowledge of people on a forum, so starting slow is just a route I prefer to go rather than diving in and potentially making things worse from bad advice. I'm a software engineer myself, and am familiar with building systems and the process of troubleshooting, though this is my first build in quite some time. Patience is a virtue! :-)
Soo, to answer some of your questions, let me give you a brief rundown on what I've done to date:
Just so we have the same terminology, when I say "crash", I mean ATI performs a soft recovery of the card. I'm assuming you know what that means, but if not, it's simply ATI resetting the card because it wouldn't respond, and, once recovered, puts my original settings back. Thus no longer necessitating a hard reset of the PC.
I originally installed the MSI driver for this board. Upon playing the Splinter Cell: Pandora game that came with the package, it usually randomly crashes 1-3 times per hour while playing this game. Sometimes I'll get lucky and it won't crash at all.
Next I tried installed the updated Catalyst drivers from ATI. The PC didn't like this at all. It crashed while not in use, and would reset the PC multiple times. At one, resetting is all it did. When I was finally able to enter windows again, XP was nice enough to tell me it recovered from a serious error. I sent the status report to Microsoft, and the webpage that the report brought me to told me a thread on the graphics device driver was not responding.
I was happy to see this error, simply cause I was pretty sure this was no longer a heating problem. After this, I completely wiped the system of the ATI driver, and reinstalled the MSI driver. Since then, I've had no resets. I have not played Pandora again to see if the GPU crashes again. I plan on doing that soon, though my schedule tends to be very hectic.
I also recently installed the v3.4 BIOS for my mobo to get the Venice core support.
As for the IRQs, I'll have to get that later, as I'm at work right now. However, I'd be surprised to find conflicts there. The wireless card could be interesting. I know that Linksys and Microsoft's wireless adaptors tend to fight for control (MS usually wins, big surprise!). I can certianly disable the device while playing Pandora and see if that improves the situation, if I find I'm still crashing.
I'll keep you updated. Again, thanx for your response!
-Jay

MSI ATI X800XL Problems

Similar Messages

Maybe you are looking for