MSI B75A-G41, Cannot restart computer

Hello,
Whenever I restart my computer (both by pressing restart button on the case and restarting from Windows)
it won't start. It hangs right after powering up showing black screen with letter + number in the bottom right corner (only A2, [B, C, D]+something if I remember correctly).
Any help would be appreciated.

>>Posting Guide<<

Similar Messages

Where is the BIOS chip located on MSI B75A-G41

I need to replace the bios-chip on MSI B75A-G41. Anyone know where the chip is located?

I thought the BIOS would be the chip with the red dot on it like on other MSI MBs.

Cannot connect to USB3 on MSI B75A-G41

Hi everyone.
I built my first computer 2 weeks ago and was very proud when it kicked in om my first boot. Everything seemed to be working just fine, but then I found out that I have no connection on my USB3 ports.
I have two on the chassi and, obviously, two moore at the back of the chassi (on my motherboard).
None of the ports are working, and they dont have any voltage either (the controle lamp on my card reader doesn't light up like it does if I plug into USB2, since all USB2 ports are working).
I have tried to reinstall my drivers, both from the cd and from downloads at the Internet but nothing changes.
No indication in the device manager that there are any problems.
As far as I can see the USB is enabled in BIOS.
Do you have any suggestions on what else to do or have you heared of the problem elsewhere?
Rgrds
//Roger

Now I have time to deal with this again.
Sorry for late reply
I have Win7 Home Premium Swedish ed.
Just checked BIOS.
see attachments.
Se also screen prints from Device Manager
BIOS:
Device Manager:

Bluetooth non-responsive, cannot restart computer

I have a bluetooth wireless mighty mouse that I use on my Macbook Pro. When I put my computer to sleep and wake it up without the mouse within range, the mouse gets disconnected but I cannot turn bluetooth off or fully restart/shut down my computer. For example: I was using my computer last night with the wireless mouse. I closed the lid before I went to sleep. I brought the computer to class and opened the lid and the computer read "device disconnected." I tried to turn off bluetooth but I couldn't and when I tried to shut down/restart the computer it always gets stuck on the screen that shows just prior to powering off. Is there something I can do besides disconnecting my mouse manually whenever I finish using it?

Hi,
Can you access Windows Recovery Console by tapping away at f8 as you start the notebook?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Cannot restart computer without 10 to 20 BSODs ever since I upgraded to Windows 8.1

Hi,
I have a Samsung ATIV Book 8 laptop (2013 model). It has been working great on Windows 8.
In May, I upgraded to 8.1 and restarting has been nearly impossible ever since. I can leave my computer in sleep mode for days and come back and it would work. However, if I shut down/turn On or restart, I would get 6-20 Blue Screens Of Death that would
take 10 to 30 minutes and only after that will the laptop finally turn on.
The BSOD errors I get are usually in this sequence: (Driver) IRQL, Bad Pool Header, Bad Pool Caller, System Service Exceptions and Driver corrupted Expool.
It looks like a driver issue but I ran all driver-update tools out there and made sure my devices are uo-to-date (except for the Intel Sound Card for which I get a BSOD whenever I try to install the driver for it).
Is this definitely a driver issue and nothing more?
Could it be that some of my Hardware still doesn't an 8.1-compatible driver?
Is there no way to override the BSOD other than keep restarting?
And finally, is there no way to revert to Windows 8? (Never had a BSOD on windows 8).
Thanks
EDIT: here is a minidump zip file: http://1drv.ms/1rltlC5
These are like 10 minidumps with the latest having (should have at least) data from the driver verifier I used.

Cecangel
These were Related to TFilter.sys TFilter Kernel Module from Avanquest North America, Inc. I would remove it.
Microsoft (R) Windows Debugger Version 6.3.9600.17029 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\New folder\071614-18406-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
OK C:\Users\Ken\Desktop
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: C:\Users\Ken\Desktop
Windows 8 Kernel Version 9600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
Machine Name:
Kernel base = 0xfffff803`53a77000 PsLoadedModuleList = 0xfffff803`53d412d0
Debug session time: Wed Jul 16 15:42:10.052 2014 (UTC - 4:00)
System Uptime: 0 days 0:01:39.825
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck C2, {99, ffffe000f9e37088, 0, 0}
*** WARNING: Unable to verify timestamp for TFilter.sys
*** ERROR: Module load completed but symbols could not be loaded for TFilter.sys
Probably caused by : NETIO.SYS ( NETIO! ?? ::FNODOBFM::`string'+797c )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
BAD_POOL_CALLER (c2)
The current thread is making a bad pool request. Typically this is at a bad IRQL level or double freeing the same allocation, etc.
Arguments:
Arg1: 0000000000000099, Attempt to free pool with invalid address (or corruption in pool header)
Arg2: ffffe000f9e37088, Address being freed
Arg3: 0000000000000000, 0
Arg4: 0000000000000000, 0
Debugging Details:
FAULTING_IP:
NETIO! ?? ::FNODOBFM::`string'+797c
fffff800`8a635f67 90 nop
BUGCHECK_STR: 0xc2_99
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 2
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff803540ec6b0 to fffff80353bcafa0
STACK_TEXT:
ffffd000`2147b848 fffff803`540ec6b0 : 00000000`000000c2 00000000`00000099 ffffe000`f9e37088 00000000`00000000 : nt!KeBugCheckEx
ffffd000`2147b850 fffff803`53c6d155 : 00000000`00000001 ffffd000`2147bcd0 ffffe000`f8ec61e0 ffffe000`f7cc4010 : nt!VerifierBugCheckIfAppropriate+0x3c
ffffd000`2147b890 fffff803`53d0d4b1 : ffffe000`f9e37078 00000000`00000001 00000000`0000007f ffffe000`f8ec61e0 : nt!VerifierFreeTrackedPool+0x41
ffffd000`2147b8d0 fffff800`8a635f67 : 00000000`00000001 ffffe000`f8ec61e0 00000000`00000000 fffff800`8ad17630 : nt!ExFreePoolWithTag+0x11d1
ffffd000`2147b9a0 fffff800`8ab3c280 : 00000000`00000000 ffffe000`f7fd19c0 ffffe000`fa1ca8f0 ffffd000`2147c030 : NETIO! ?? ::FNODOBFM::`string'+0x797c
ffffd000`2147b9f0 fffff800`8a604501 : ffffe000`f6c83df0 00000000`00000000 00000000`00000001 00000000`00000000 : tcpip!RawSendMessagesDatagramsComplete+0x6c
ffffd000`2147ba30 fffff800`8a6013e7 : ffffe000`fa1ca8f0 00000000`00000000 00000000`00000000 ffffe000`f6c83df0 : NETIO!NetioDereferenceNetBufferList+0xb1
ffffd000`2147baa0 fffff800`8ab51d4c : ffffd000`2147bb60 ffffd000`2147bb01 00000000`00000000 00000000`00000000 : NETIO!NetioDereferenceNetBufferListChain+0x2a7
ffffd000`2147bb60 fffff800`8aaf67fe : ffffd000`2147be10 ffffe000`f8602040 ffffe000`fa1ca8f0 ffffd000`2147bc80 : tcpip!IppCompleteAndFreePacketList+0xa0
ffffd000`2147bbf0 fffff800`8ac087c2 : 00000000`00000000 ffffd000`2147be04 fffff800`8ac67180 ffffe000`f8728d70 : tcpip!IppSendDatagramsCommon+0xefe
ffffd000`2147bde0 fffff800`8ad16ea0 : ffffe000`f77e0710 ffffe000`f8ec6104 ffffd000`21477000 00000000`00000801 : tcpip!IppInspectInjectTlSend+0x18a
ffffd000`2147bf10 fffff803`53b51256 : ffffd000`2147c018 ffffe000`fa1ca8f0 ffffe000`fa1ca8f0 fffff800`8ab44c30 : fwpkclnt!FwppInjectionStackCallout+0x88
ffffd000`2147bfa0 fffff800`8ad274e4 : fffff800`8ad16e18 ffffd000`2147c150 ffffd000`2147c110 00000000`00000000 : nt!KeExpandKernelStackAndCalloutInternal+0xe6
ffffd000`2147c090 fffff800`8ad286db : 00000000`00000000 ffffe000`f9696130 00000000`00000000 ffffe000`f9fdf440 : fwpkclnt!FwppInjectTransportSendAsync+0x5d8
ffffd000`2147c290 fffff800`8d18fa9f : 00000000`00000180 00000000`00000000 ffffe000`fa1cf000 ffffe000`fa1b0180 : fwpkclnt!FwpsInjectTransportSendAsync0+0x63
ffffd000`2147c300 00000000`00000180 : 00000000`00000000 ffffe000`fa1cf000 ffffe000`fa1b0180 ffffd000`2147c350 : TFilter+0x5a9f
ffffd000`2147c308 00000000`00000000 : ffffe000`fa1cf000 ffffe000`fa1b0180 ffffd000`2147c350 00000000`00000002 : 0x180
STACK_COMMAND: kb
FOLLOWUP_IP:
NETIO! ?? ::FNODOBFM::`string'+797c
fffff800`8a635f67 90 nop
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: NETIO! ?? ::FNODOBFM::`string'+797c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: NETIO
IMAGE_NAME: NETIO.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 5215f7e4
IMAGE_VERSION: 6.3.9600.16384
BUCKET_ID_FUNC_OFFSET: 797c
FAILURE_BUCKET_ID: 0xc2_99_NETIO!_??_::FNODOBFM::_string_
BUCKET_ID: 0xc2_99_NETIO!_??_::FNODOBFM::_string_
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0xc2_99_netio!_??_::fnodobfm::_string_
FAILURE_ID_HASH: {b8049590-31d0-aee1-11c9-9114e4dbfddc}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag

Cannot restart computer after update software

How to fix . your computer restarted because of a problem. Press a key or waita few seconds to continue starting up. It takes a long time but still

Try starting you Mac in recovery mode, then run disk utility on the hard drive to verify/repair it.

Random lines around screen and then cannot restart computer

I'm having an issue with my iMac. recently i i will turn it on and after a while there will be random lines across my screen in certain windows. when I move the windows around the line moves with the window. as i open other apps i start getting other random lines in other parts of the screen. after a little while longer there is so much random pixels all over the screen that I cant work anymore. at this point hte computer is basically stuck and I cannt do anything. I will then hold the power button down to turn off the computer. when i turn it back on I get the black screen of death which says I have to turn the computer off and turn it back n. if i keep turning it off and on it wont start and give me the same screen. if i wait a couple of hours and start it back up it will first give me the screen again. the second time it will start and tell me that mac unexpectedly shut down. at first the technicians told me that I should reformat the hard drive and I did that. is still have the same problem. does anyone have any idea what this could be?

If the message you're getting is in several languages, that's a kernel panic. Kernel panics are usually, but not always, caused by hardware, with memory a leading cause. If you have a mid-2010 mini, you can easily reseat the memory (remove and reinstall) .... mini's prior to that are a bit more involved to open the case.
See this FAQ on resolving kernel panics.

MSI B75A-G41 Bios update

hello, wanted to ask about bios should i update them or its not necessary when my PC works fine. Downloaded live update 5 and it says that current bios version is v17.1 in website saw that there is v17.8 . When scanned with live update it didn't found any MB updates. So any suggestions?

Never use Live Update! It is known to try updating within Windows that often ends with a bricked board. If you have no issues there is no need to update.
If you want to update to the latest bios (which is 17.8):
>>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.

Can anyone explain why I cannot restart my computer after apple hardware test with no problem found

Can any body help
when starting computer apple hardware test appears
following test, no problem found but cannot restart computer
apple hardware test appears again
How can i skip apple hardware test?

Have you read for possible solutions over in the "More Like This" thread over here?----------------------->

G4 MDD, EM "Startup Disk is Full, cannot restart"

Hello, all.
So I have a G4 with two hard drives(PowerMac G4(MDD) 2x1.25GHz). I was loading some music via a flash drive and an error message popped up that said, “Startup disk is Full”. I have two hard drives, one is running 10.4.9, the other was running 10.5.6. I was working in the 10.5.6 drive when I received this error message. I decided that since I received this EM and was experiencing other problems with this drive, that I would reformat it back to 10.5 and update it back up. When I put in the install disk and tried to restart, I got the following Error message, “Startup disk is full, cannot restart computer”. I tried a couple of times and cleared most of the junk off of my desktop, but still had the EM.
So I figured since I have two drives, I would manually turn off the computer and restart it in target mode to load the 10.4.9 drive.
With the install disk in the computer, I turned off the computer, and guess what….now it won’t turn back on! So apparently, the EM(“Startup disk is full, cannot restart computer”) was true and now my Mac won’t even turn on.
Colour me dumb, but I was hoping that someone may have run into this before and might know of a fix to get it back on. So at least I can manage the damage.
I started searching through the archives and found that I may be able to turn it back on, with another Mac(Kinda like a Jump start), but I am not familiar with the process.
Has anyone ever experienced something like this? Does anyone have a suggestions on how to proceed?
Any help is appreciated.

You held down the C key when you tried the installer disc?
Have you tried starting in Safe Mode? This may temporarily clear enough files to allow you to do a quick clean.
Mac OS X: Starting up in Safe Mode - http://support.apple.com/kb/HT1455
What is Safe Boot, Safe Mode? (Mac OS X) - http://support.apple.com/kb/HT1564
Safe Boot takes longer than normal startup - http://support.apple.com/kb/TS1884

Cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.

when Update to 10.7.2 ,I cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.
OS:10.7.2
Macbook Pro 2010-mid 13inch

I also have the same problem, however if I use Firefox or Opera sites with ssl connection work fine. Still, I can't use Google Chrome (ssl), Safari (ssl), the Mac app store (generally), or the iTunes store (generally). Both the iTunes store, Safari and the app store won't respond, and Chrome displays this error: (net::ERR_TIMED_OUT). The problem persists regardless of what network I'm using. Also, when trying to access the keychain or iCloud, the process will not start (will hang). I didn't have these problems at all before updating to 10.7.2.
Sometimes rebooting helps, and sometimes not. If the problem disappears by rebooting, then it only lasts a few minutes before it reappears. It is very frustrating, especially since there doesn't seem to be any obvious or consistent way of which to fix it.
I'm also using a Macbook Pro 13-inch mid 2010.

Yoga 13 SDXC Card Shutsdown Computer and it cannot restart with card installed

Hi,
I have read on the forum that people are using the SDXC cards with their Yoga 13's.
I have purchased a Sandisk 64Gb SDXC ExtremePro card but when I put it into the Card Reader a blue screen comes up saying " Your PC ran into a problem and needs to restart." It also gives and error with this message saying: PAGE_FAULT_IN_NONPAGED_AREA (TosExt.Sys). It cannot restart again until I remove the card, the same thing happens in SAFE MODE also or if I try to start the computer with the card inserted already. The card is brand new and I bought it in a reputable shop. I have tested the card in a Lenovo ThinkPad X230 and it works fine. I have also tried to insert a different standard SD card into the Yoga but the same thing happens. I have reinstalled the driver for the reader but the problem still remains. The OS is Windows 8 64 bit. The card is in ex FAT format and I re-formatted it again just to be safe but still no luck.
I was not able to find anything regarding this online but saw that some people here have similar problems.
I would really appreciate if someone could help or at least let me know if there is a way of contacting Lenovo about this problem, I see that they will only accept emails regarding the ThinkPad product line.
Thank you in advance and best regards to all!

I have also problems while inserting a sdcard but not on a Lenovo. I just give here what I observed but I have no direct solution
1. I bought last year a Samsung chronos and it was impossible to put a sd card. Each time I get the blue screen with the message page_fault_in_non_paged_area (tosExt.sys). When I contacted Samsung they of course do not understand and suggest that I reinitilize completely the computer which I did. At this moment it was possible to insert a sd card without problem but as soon as I have installed my usual sotfwares it came back to the same situation : impossible to put a sd card.
2. I bought meanwhile a second computer, an Asus Zen book, and got exactly the same problem. Both computer are operated under windows 8 but the upgrade 8.1 does not change anything.
3. the only way I can read a sd card in both these computers is to use a USB adaptor. In this case there is no problem.
4. I recently bought a Yoga pro 2 from Lenovo. Surprinsingly with the same kind of sofware installed, I can use directly a sd card.
This seems to be a tricky problem

I can get video on airplay anytime but i cannot get audio all the time. in sound output i select airplay but it only reverts back to internal speakers. same if i try earbuds. the only way to fix it is to restart computer. what do i do to fix it,

I can get video on airplay anytime but i cannot get audio all the time. in sound output i select airplay but it only reverts back to internal speakers. same if i try earbuds. the only way to fix it is to restart computer. what do i do to fix it,

In case anyone has had the same problem as me, I have just managed to fix this by doing the following:
Switch off Mac
Switch back on in Safe Mode (Hit power button, then hold Shift key until a loading bar appears at the bottom of the screen).
Switch off Mac again
Remove power cord and wait 15 seconds
Plug power cord back in and hold down the keys alt, cmd, p, r all at the same time until you hear Starting chime for a second time and hopefully your audio will back.

Apps tab of Creative Cloud desktop helper constantly displays "Download error. press retry or contact customer support". I've quit CC desktop helper, restarted computer, checked network settings, relogged in. Cannot download any new apps or updates. HELP

Apps tab of Creative Cloud desktop helper constantly displays "Download error. press retry or contact customer support". As well as reloading, I've also quit CC desktop helper, restarted computer, checked network settings, relogged in. Cannot download any new apps or updates. please help.
System: Mac OSX 10.9.4. 3.4ghz intel core i7, 8gb ram

Hello,
Adobe has brought these new links in this matter:
Troubleshoot Creative Cloud download and install issues and
App doesn’t open; progress wheel spins continually
Please have a look there. If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences. I quote from Preran: The chat button is activated as soon as there is an agent available to help.
Good luck!
Hans-Günter

Itunes update issue restarted computer now cannot start itunes

Prompted to download latest itunes version, I did this and restarted computer and now cannot restart itunes message "itunes cannot run because some of its required files are missing. Please reinstall." Do I have any options except reinstall will I lose all my playlists? Any assistance much appreciated.

THANKYOU SO MUCH.
I update this morning at work, on VISTA with iphone 4. Same thing, i restart, it tells me Itunes cannot start as files are missing.
I seached EVERYWHERE, with lots of stupid long winded possible solutions.
THIS WORKS, and its ONE SIMPLE CLICK... WHY DO APPLE NOT HAVE THIS LISTED ON THE FRONT OF SOLUTIONS
THanks to those who actually know what to do above.

MSI B75A-G41, Cannot restart computer

Similar Messages

Maybe you are looking for