MSI ex600 sound headphones&speakers problem

Hello all I have MSI ex600 and i have problem with my sound
When speakers playing some music and i want hear it in my headphones its problem because speakers playing away
So i hear music on headphones and speakes too
I try find some solution (and its many problems with this stuff) but for me didnt work
Some information of me Sound card :
Sound(a)   : 82801H ICH8 Family HD Audio Controller module: snd-hda-intel
[root@SilentHill ~]# lsmod | grep snd
snd_seq_oss            33408  0
snd_seq_midi_event      7936  1 snd_seq_oss
snd_seq                55936  4 snd_seq_oss,snd_seq_midi_event
snd_seq_device          7956  2 snd_seq_oss,snd_seq
snd_pcm_oss            42400  0
snd_mixer_oss          17024  1 snd_pcm_oss
snd_hda_intel         374568  3
snd_pcm                82312  2 snd_pcm_oss,snd_hda_intel
snd_timer              22536  2 snd_seq,snd_pcm
snd_page_alloc          9232  2 snd_hda_intel,snd_pcm
snd_hwdep               9096  1 snd_hda_intel
snd                    57320  15 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep
soundcore               8096  1 snd
[root@SilentHill ~]# cat /etc/modprobe.conf
# /etc/modprobe.conf (for v2.6 kernels)
# alias wlan0 ndiswrapper
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.15 ---
alias snd-card-0 snd-hda-intel
options snd-hda-intel index=0 model=5stack
alias sound-slot-0 snd-hda-intel
# --- END: Generated by ALSACONF, do not edit. ---
That was my last stuff what i tried (options snd-... in modprobe.conf)
Thanks and sorry for my bad english

Add this to your modprobe.conf :
options snd-hda-intel model=3stack-6ch
It will add a headphones switch to your alsa control which if you disable will mute the onboard speakers.
Works on my MSI vr600

Similar Messages

  • Software or hardware problem? I have no sound headphones/speakers

    quick question-
    Is it signifigant that I hear the startup chimes, but after its boots into OS. I cant hear any sound from either the speakers or headphones. I also tried Imic (usb audio input/output device) and didnt get any sound either.
    I have deleted sound preference
    I have zapped PRAM
    thx

    Have you checked sound preferences under System Preferences. Is the default output your speakers and default input microphone? I remember when i re-installed Panther on a Mac Mini that the default setting was none and i heard no sound nor could i input any.
    Good Luck

  • MSI KT3V + Sound Blaster Live Problem

    Hello Guys
    First, sorry for my english, i'm polish.
    Yesterday I sold my old motherboard (Shuttle AK32A), and i bought new motherboard MSI KT3V.  After instaling all peripheals I install on formated partition Win2000 SP3, Via 4in1 4.45, Drivers for my GF4 MX440, Network Adpater 3Com-SOHO, and sound blaster Live 1024. After this i instal game IGI2, and try play, After 30 s. in game main menu my computer crashes, screen is black, led on monitor is lights on yellow, after this i hear 10 - 20 second music from main menu in speakers, after this time my computer crashes completely, a hear beeeeeeeeep from speaker, and this moment I can only push reset button :(
    I try install many version drivers, from orginal cd, downloaded from internet. And newest version from 1.03.2002. An nothing :( I remove my Live 1024 from computer, and put friend live 5.1, and no changes, computer crashes :(
    My desktop resolution is 1128x864x32 bits 100hz When i try play  Divx movies after 1 - 2 minuts, frequency of my screen automatic swicth to 50 hz. If I try manualy switch frequency to old value (100 hz) nothing hapend, and i only can restart system :(
    When i work on my desktop (Word, IE, Winamp etc.) after 5 - 20 minutes, my system crashes too (yelow LED on monitoir, black screen, same situation) and I can only push reset button. When i remove card from pc, or turn card off in device manager all works fine.
    I upgarde bios to newer wersion (1.8), reinstall drivers, reinstall windows in APIC options turned off, remove network adapter, and no changes :(
    P.S. On old Mothearboard all works fine :(
    Anyone can help me solve this problem. Please
    Grettings Mark
    My Hardware
    MB: MSI KT3V
    Athlon 1700+
    512 MB DDR 266 Mhz
    3Com-SOHO Network Adapter
    WDC60 GB +  8.4GB Seagate
    GF4MX440 64MB InsideTNC
    CDRW Teac 40x, CD LG52x

    Quote
    Originally posted by maesus
    Also set PCI Delay Transaction enabled.
    This was a solution for my problem :-)
    Thank you very much. You have beer from me :-)
    Grettings

  • No sound from speakers or headphones on my hp pavilion dv6-6c50us

    no sound from speakers or headphones on my hp pavilion dv6-6c50us.  Speakers are not muted and volume is up.  May have happened after a system update

    Hi,
    Try the following.
    Download the relevant IDT Audio installer on the links below and save it to your Downloads folder.
    IDT Audio Installer - Windows 7.
    IDT Audio Installer - Windows 8.
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP 15-r29wm NO SPEAKERS SOUND (headphone​s OK) [Hardware issue]

    Hello everyone,
    I have a new HP 15-r029wm.The sound from speaks just stopped all by itself. the headphones work fine but the speakers don't. When I try troubleshooting, it says that no problem was detected. Here is all what I did but still nothing:
    1. I updated the audio driver from HP.
    2. I updated the driver from Realtek.
    3. I updated the BIOS.
    4. I reset the BIOS to defaults.
    5. I looked if something is blocked inside the jack.
    6. I restored using HP Recovery partition.
    7. I used a Ubuntu live USB. Everything looks fine, but no sound comes out of the speakers.
    Ps. I can't return the laptop to walmart because I am overseas for about a year.
    Thank you for reading.
    Edit:
    It is a harware issue. The speakers were self-destroyed. Surprised how this could have happened. Check out the photo...

    @linda1045 
    Are you using the same type of notebook and what operating system are you using?
    Please read the following documents if you need help in finding those.
    How Do I Find My Model Number or Product Number?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Are you able to get sound from headphones as well?
    Are you referring to the built in speakers or a set of external speakers?
    No Sound from the Speakers (Windows 7)
    Troubleshooting Sound Problems with External Speakers and Headsets in Windows 7
    Troubleshooting Audio Problems with External Speakers, Headphones, and HDMI Sound Devices
    HP Notebook PCs - Resolving No Sound or Audio Problems in Windows 7
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Audigy 2 zs - moved pc from one room to another and now no sound from speakers (headphones

    As the title says,
    I just completed moving my pc from one room to another. Low and behold I get no sound from speakers (just some stereo speakers with powered sub). I do get audio out of the headphones (fully disconnect headphones from front panel when attempting to get sound from speakers). I know this probably points to a faulty speaker setup but that's pretty straight forward and looks to be fine.
    Anyone encounter this problem before or have any suggestions?
    Thanks!

    Mr. Jefferson, Thanks for the quick response!
    A mystery!  Usually, it's easiest to have FiOS patched into your home's cable TV wiring, so I'm curious why you don't have a coax router that provides you with the ethernet (internet) jacks.  Some questions:
    Do you watch TV from some other source (like satellite or cable TV) but are using FiOS only for Internet?
    I have both fios tv and internet
    You said 2 cables are going from your router to a box in the wall.  What are the 2 ports labeled on the router?
    One of them is just the main "internet" port I guess you could say while the other is just one of the ports labeled 1-4 (plugged into #2 I believe)
    Is there any labeling on the jacks on the wall box?  On the other box in your room?
    On the wall box in this room theres labeling on the jacks on the wall box that says IN and OUT (in marker), while in my room there's the same box but with only ONE, unlabeled jack (I think there's supposed to be another jack but it seems to be closed/sealed off)
    Do you know where the Internet jacks connect to? Like a patch panel or box somewhere in your garage or near where your FiOS/cable tv/phone service is?  Somewhere these cables have to terminate.
    I believe they somehow connect to this box in my garage (did some research and I believe it's called the ONT? and there's another box below it which I believe is the battery)
    Hope this info helps!

  • Sound playing through both headphones & speakers

    Sound playing through both headphones & speakers at the same time
    please help.
    HP ENVY TouchSmart m7-j020dx Notebook PC (ENERGY STAR)

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63555.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, download and reinstall the Chipset driver on the following link.
    http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63408.exe
    When the Chipset driver reinstallation has completed, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again before checking.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Strange problem and clicking sound from speakers!

    I have problem with sound but this is strange one and i can't find solution anywhere... I am pretty good with computers and i usualy find solutions on internet when i have problem but this is something i can't solve by myself... My laptop is HP 355 G2 and i have Windows 10 installed on it but the same problem was on Windows 8.1 too... So after clean installation of Win10 the sound was good and worked normaly for 2-3 days and now i only hear a clicking sound from speakers when audio is playing but the strange thing is that when i pick up laptop from the table the sound start to work for few seconds and then the clicking sound comes back again, so i suspect that this has something to do with accelerometer which is built  in laptop for hard disc parking in case of drop or something like that... I tryed to uninstal/disable driver for accelerometer but windows install it again emidiatly after reboot, i tryed clean install few times and problem apears again and again... I just don't know anymore what to try to do in order to solve this so if anyone know anything about this please help... And i forgot to say that headphone jack work normaly and when i plug the headphones or external speakers in headphones jack the sound works but the clicking sound still comes out from built  in speakers... Thanks in advance and sorry for my English, it is not my native language and there is no support forums on my native language witch is Serbian...

    So i tried few more things like disable/enable sound card, driver reinstalation, bitrate changing and everything elese i could find here on forums or on the net (pretty much same stuff like here could be find on internet) and strange thing is that no one have same or similar problem like me... i just don't know anymore what to do...

  • Suddenly no sound from speakers and only from headphones

    Hello,
    I have a HP 8440p VQ664ET#ABU Elitebook laptop running Windows7 64bit pro.
    Since today I'm experiencing the following problem:
    1) no sound is heard through speakers when headphones are disconnected.
    2) If I connect the headphones, the sounds are heard correctly through them: this is the expected behavior
    I don't think it's a speakers hardware problem because I can make the speakers play sounds for one or two seconds like this: while a sound is being played, such as music file for instance, if I move up and down the headset volume cursor (regardless if headphones are connected or not) I can hear the played sound through the laptop speakers for a few seconds, after which the speakers mute again.
    So to summarize:
    1) Headphones disconnected: no sound from speakers
    2) Headphones connected: sound from headphones
    I rebooted, suspended and restored without any luck so far.
    I'm under the impression that there might be a problem with the headphone jack: it is like the laptop always thinks that the headphones are connected and therefore cuts the output to the speakers.
    Any clues?
    Thanks
    Sergio

    Try installing the sound drivers from the following weblink:
    http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59649.exe
    If the issue persists, try the troubleshooting steps mentioned in the following weblink:
    HP Notebook PCs - No Sound from Speakers (Windows 8)
    Offers tested solutions that begin by identifying the exact issue, and then adjusting the settings that will resolve the majority of sound problems on a notebook running Windows 8.
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • No sound from HP G62 laptop and can no longer get sound from speakers or headphone jack . USB sworks

    have an HP G62 laptop.  I can no longer receive sound from speakers or from headphone jack.  If I plug speakers into usb - I will get sound.  Any ideas?

    I don't think I have anything to offer that you haven't done. In Device Manager, Device status says "working properly" and you've reinstalled this driver.
       Realtek Audio Driver for Windows XP
    Right?
    The only other thing I know to do is restore the hard drive to its original factory fresh contents.
    -Jerry

  • My laptop lost all his sound n speakers..only headphones work.is a g6 b1z96ea

    my laptop lost all his sound n speakers..only headphones work.is a g6 b1z96ea
    what the hell is going on??i tried anything but doesn´t works

    Is "Do not disturb" activated in the Settings?
    Did you try to set up the phone as new device without using the latest backup?
    How to back up your data and set up as a new device
    Also try these steps:
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    copied from Troubleshooting iPhone hardware

  • Sound through speakers & headphones with Mac Pro & Vista?

    Hi,
    Not sure where to post this but here goes:
    I have a current model Mac pro and a set of Harmon Kardon soundsticks plugged in. All is well in OS X but when in Vista i can't get sound just through the headphones? It comes through both the headphones & speakers at the same time.
    How can i get round this?
    Thanks.

    I am having the same issue. Did you ever find a resolution? Sound worked for me for about a month, then it just stopped working one day. I have tried driver un-installation/installation/updates with Winders XP and Vista, resetting PRAM, etc... nothing works.
    Is there a good USB/Firewire sound device that would work for the MacPro running Winders?
    Thanks,
    B
    Message was edited by: blaineac

  • I installed win8 64bit on macbook pro. everything running good but i am not getting sound in speakers. i am getting sound in earphone/headphones but not in main speakers.

    i installed win8 64bit on macbook pro. everything running good but i am not getting sound in speakers. i am getting sound in earphone/headphones but not in main speakers.

    Have you checked System Preferences -> Sound to see the Output when nothing is plugged in the headphone jack? Also, check if the headphone jack shows a faint read-light, which is the optical laser.

  • Sound from speakers as well as headphones after bios update in pavilion g4 1121 tx laptop

    Dear madam/sir
    after performing a bios update as sugested by hp support assistant I am getting sound from speakers as well as earphones .I stay in a small town and there is no hp centre nearby .I am a student staying in hostel where i cant play sound through speakers as it disturbs my room mates .Kindly assist .
               product details
    product no  ; QB404PA#ACJ
    product : hp pavilion g4 1121 tx
    purchased : sept 2011
    Thank You

    Hi @satyakam 
    Welcome to the HP Support Forums!
    I understand that you are enjoying your sound  from everything today. I am happy to help.
    If you have a sound application installed along with your sound driver, then I would check the settings for the speakers and headphone in that application.
    Then I would make your headphone the default device when it is plugged in.
    To make headphone as the default device
    1.    Click on Start; Go to Control Panel.
    2.    Click on Sound.
    3.    Switch to Recording.
    4.    Select your microphone/headset as the default device.
    5.    Save the changes by clicking on OK.
    Also you can Uninstall and re-install your audio device drivers, to do that:
    1.    Click on Start; in the start search type “devmgmt.msc” without quotes and press Enter.
    2.    Expand Sound, Video and Game controllers.
    3.    Right click on the audio component and then click uninstall.
    With the driver uninstalled then download and re-install the driver from:
    HP Pavilion g4-1121tx Notebook PC Drivers
    Just be sure to select the correct operating system from the drop down, and click next, which will refresh the list of drivers below.
    Let me know if that helped at all.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • New headset, but certain programs are transmitting sound through speakers and not headphones.

    Spoiler (Highlight to read)
    Hello,
    Hello,
    I just recently purchased a new headset for gaming but have been having some issues with it and the system sound. One major issue is when I call someone on skype, the sound from Skype or the call will go through the headphones, but any other audio comes out of the speakers. I have also notices that iTunes also does not function when I am in a call as well. Some examples would be if I were to want to watch a YouTube video while in a call, the sound would come through the speakers and not the headphones. However, I did find a fix for it. All I had to do was disable the main speakers and the audio was transmitted to the headphones. Another example would be if I wanted to run games via Steam (Garry's Mod, TF2, ect.), I wouldn't get any sound whatsoever from the game. Not through my speakers or headphones. With one exception, Garry's Mod volume I can hear through the speakers while in a Skype call, but I want the sound to come through the headphones. But with TF2, I get no sound whatsoever. If you need any more information about my issue, please feel free to ask. Thank you.
    This question was solved.
    View Solution.

    Hello @LayneStaley,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how certain programs are transmitting sound through speakers and not the headphones, and I would be happy to assist you in this matter!
    To ensure that your headphones are utilized when plugged into your notebook, I recommend following the steps below:
    1. Click the Start button
    2. Click Control Panel
    3. Click on Hardware and Sound (sorting the control panel icons by "category"), and then click on Sound
    4. Under Playback, you should see one or two speaker icons. One of them should already have a green checkmark next to it (which will be your notebook's main speakers). If the second Speakers icon is not visible, right-click in the list of devices and select Show Disabled Devices
    5. A second, disabled icon of "speakers" should appear. Right-click this icon and click Enable
    6. Select the newly enabled speaker device, right-click it, and select "Set as Default Device".
    7. Click Apply.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Maybe you are looking for

  • Battery doesn't charge but ibook still runs on ac?

    I've got a 2004 iBook G4 1.0ghz processor 1.25gb ram. Had it 16 months, no problems so far until today. When I plug in the AC the laptop runs off this power- the battery symbol changes to show the power plugs- but the battery does not charge. It stay

  • Swf file causing rollover images not to work

    I've inserted a Flash file into my webpage in Dreamweaver and it broke all my rollover images.  Even deleting the swf file and reinserting the rollover images doesn't work.  I've read a few threads on this but can't quite find exactly what I'm lookin

  • Error message when trying to delete facebook...help

    i go into settings and accounts where it brings me to facebook and twitter. i try to delete the accounts and get an error message that says "an error has occurred, please try again" that's it. not other instruction. any suggestions?? thanks.

  • Issue in ChaRM Configuration

    Hello Guru's, I'm configuring the ChaRM in our solution manager system, we have 3 system landscape DEV>QAS>PRD, we made all the settings related to Charm. While checking the ChaRM configuration its throwing an error message. No consolidation system f

  • Change default offset in signal calculatio​n step

    Hi All, I'm using LabVIEW SE 2012 on win7.  Is there a way to set DC Signal offset to be equal to the sum of another signal inputs offset plus a constant value (from a text or other?)    I want to be able to change the DC signal offset of one signal