MSI H97 pc mate - unable to update the bios
Just installed this mb together with the Intel Pentium G3258 W 8.1 32 bits.
Current Bios 4.0 me 9.1.0.1120
Latest bios 5.2 incl updates for g3258
Copied the latest bios to a bootable usb stick, but unable to find the file on the stick.
When I back up 4.0 it is recognised, but I'm not able to update to new version.
Also the whole me concept is unknown to me.
Urgently need advise how to succesfully update this bios on this mb.
Tks.
This SOP is really useful! Thanks for sharing
Quote from: flobelix on 06-August-14, 02:40:46
Stop further attempts and follow the below:
>>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive (180.rar) and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB
G.) Now follow the directions and let the tool flash
H.) After flashing reinstall ME drivers in Windows: http://download.msi.com/dvr_exe/intel_amt10_mb.zip
Similar Messages
-
MSI H97 PC Mate CPU Fan RPM Control Cruve Question
My planned build:
Project "Bad Wolf"
CPU: Intel Pentium G3258 3.2GHz Dual-Core Processor
CPU Cooler: Cooler Master Hyper T4 70.0 CFM Rifle Bearing CPU Cooler
Thermal Compound: Arctic Silver 5 High-Density Polysynthetic Silver 3.5g Thermal Paste
Motherboard: MSI H97 PC MATE ATX LGA1150 Motherboard
Memory: G.Skill Sniper 8GB (2 x 4GB) DDR3-1600 Memory
Storage: Seagate 1TB 3.5" 7200RPM Hybrid Internal Hard Drive
Video Card: Asus GeForce GTX 960 2GB Video Card
Case: Deepcool TESSERACT SW ATX Mid Tower Case
Power Supply: EVGA 500W 80+ Certified ATX Power Supply
Case Fan: Cooler Master R4-L2R-20AC-GP 69.0 CFM 120mm Fan
Case Fan: Cooler Master R4-L2R-20AC-GP 69.0 CFM 120mm Fan
Case Fan: Cooler Master R4-L2R-20AC-GP 69.0 CFM 120mm Fan
As you can see within my build list am getting Cooler Master R4-L2R-20AC-GP 120mm fans for my case (For short I'll call them R4 fans) and I would like to replace the stock fan from my Hyper T4 with an R4, because they are much quieter than the stock fan and have nearly the same airflow and since I'm getting a side window case it'd be nice to have an LED lit fan in the middle of my case
However the R4's are 3 pin, not 4 pin so they don't have PWM control. Is there a way to set up the H97 PC Mate to control a 3 pin fan in it's 4 pin cpu header?
I talk to MSI over the phone the guy said that it should be able to control the 3 pin fan through the cpu header via controlling the voltage. He said to look it up online to see if I could find how to do it, and to download the user manual and look through it, but I couldn't find anything on how to set up the BIOS to do that.
If I can't I'm not even going to bother to buy a third fan.
Ty KB_TheDireWolfHi
CPU fan headers are only able to control PWM fans(4 pins). If you lut 3 pin fan into it, it will run 100% possible speed.
SysFan headers can control 3 pinned fans by voltage increase/decrease, between 50-100%. And PWM fans of course too will work.
Maybe a fan splitter, or an actual fan controller would do? I have a controller myself for all 6 fans -
Unable to update the VAT_CODE column through supplier sites API
Hi,
I'm unable to update the vat code column of the ap_supplier_sites_all table using the ap_vendor_pub_pkg.update_vendor_site API.Oracle application instance 12.1.3 and OS linux.Please find the code below.I'm able to update other feilds,but not the vat_code.Please help on this.
Thanks,
Abhilash
CREATE OR REPLACE PACKAGE BODY APPS.xx_wo172304_test
AS
PROCEDURE xx_vat_wo172304 (
errbuf OUT VARCHAR2
, retcode OUT VARCHAR2
IS
CURSOR cur_vat
IS
SELECT site.*
FROM apps.ap_suppliers supp, apps.ap_supplier_sites_all site
WHERE site.vat_code IN
('CZ OEUS 20', 'CZ OEUZ 20', 'CZ OJCD 20', 'CZ OT20', 'CZ-20-EDC', 'OEUS20', 'OEUZ20', 'OPP20E'
, 'OS20', 'OT20')
AND supp.vendor_id = site.vendor_id
AND site.org_id IN (608, 1508, 2396, 2397)
AND site.vendor_site_id =68154;
l_vendor_site_rec ap_vendor_pub_pkg.r_vendor_site_rec_type;
l_vat_code ap_supplier_sites_all.VAT_CODE%TYPE;
l_vendor_site_id ap_supplier_sites_all.vendor_site_id%TYPE;
x_return_status VARCHAR2 (100) := NULL;
x_msg_data VARCHAR2 (1000) := NULL;
x_msg_count NUMBER := NULL;
l_error_reason VARCHAR2 (2000) := NULL;
l_user_id number := FND_GLOBAL.USER_ID;
l_last_update_login number := FND_GLOBAL.LOGIN_ID;
l_program_application_id number := FND_GLOBAL.prog_appl_id;
l_program_id number := FND_GLOBAL.conc_program_id;
l_request_id number := FND_GLOBAL.conc_request_id;
BEGIN
-- mo_global.init ('SQLAP');
FOR rec_vat IN cur_vat LOOP
IF rec_vat.org_id = 608 THEN
IF rec_vat.vat_code = 'OEUS20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUS21';
ELSIF rec_vat.vat_code = 'OEUZ20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUZ21';
ELSIF rec_vat.vat_code = 'OPP20E' THEN
l_vendor_site_rec.vat_code := 'CZ OPP21E';
ELSIF rec_vat.vat_code = 'OS20' THEN
l_vendor_site_rec.vat_code := 'CZ OS21';
ELSIF rec_vat.vat_code = 'OT20' THEN
l_vendor_site_rec.vat_code := 'CZ OS21';
END IF;
ELSIF rec_vat.org_id = 1508 THEN
IF rec_vat.vat_code = 'CZ OJCD 20' THEN
l_vendor_site_rec.vat_code := 'CZ OJCD21';
ELSIF rec_vat.vat_code = 'CZ OEUS 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUS21';
ELSIF rec_vat.vat_code = 'CZ OEUZ 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUZ21';
ELSIF rec_vat.vat_code = 'CZ OT20' THEN
l_vendor_site_rec.vat_code := 'CZ OT21';
END IF;
ELSIF rec_vat.org_id = 2396 THEN
IF rec_vat.vat_code = 'CZ OEUZ 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUZ 21';
ELSIF rec_vat.vat_code = 'CZ OJCD 20' THEN
l_vendor_site_rec.vat_code := 'CZ OJCD 21';
ELSIF rec_vat.vat_code = 'CZ OT20' THEN
l_vendor_site_rec.vat_code := 'CZ OT21';
ELSIF rec_vat.vat_code = 'CZ-20-EDC' THEN
l_vendor_site_rec.vat_code := 'CZ-21-EDC';
END IF;
ELSIF rec_vat.org_id = 2397 THEN
IF rec_vat.vat_code = 'CZ OEUS 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUS 21';
ELSIF rec_vat.vat_code = 'CZ OEUZ 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUZ 21';
ELSIF rec_vat.vat_code = 'CZ OJCD 20' THEN
l_vendor_site_rec.vat_code := 'CZ OJCD 21';
ELSIF rec_vat.vat_code = 'CZ OT20' THEN
l_vendor_site_rec.vat_code := 'CZ OT21';
ELSIF rec_vat.vat_code = 'CZ-20-EDC' THEN
l_vendor_site_rec.vat_code := 'CZ-21-EDC';
END IF;
END IF;
l_vendor_site_id := rec_vat.vendor_site_id;
l_vendor_site_rec.org_id := rec_vat.org_id;
l_vendor_site_rec.vendor_id := rec_vat.vendor_id;
--l_vendor_site_rec.vendor_site_code:='318581-MOR. KRU';
l_vendor_site_rec.rfq_only_site_flag := 'Y';
-- l_vendor_site_rec.last_update_date := SYSDATE;
l_vendor_site_rec.last_updated_by := 1134; MARTIN.ROUNDS
-- DBMS_OUTPUT.put_line ('VAT CODE:' || l_vendor_site_rec.vat_code);
--DBMS_OUTPUT.put_line ('Vendor Site Id:' || l_vendor_site_id);
fnd_file.put_line (fnd_file.LOG
, 'VAT CODE:' || l_vendor_site_rec.vat_code
fnd_file.put_line (fnd_file.LOG
, 'Vendor ID:' || rec_vat.vendor_id
fnd_file.put_line (fnd_file.LOG
, 'Vendor Site Id:' || l_vendor_site_id
fnd_file.put_line (fnd_file.LOG
, 'RFQ ONLY SITE FLAG:' || l_vendor_site_rec.rfq_only_site_flag
ap_vendor_pub_pkg.update_vendor_site (p_api_version => 1
, x_return_status => x_return_status
, x_msg_count => x_msg_count
, x_msg_data => x_msg_data
, p_vendor_site_rec => l_vendor_site_rec
, p_vendor_site_id => l_vendor_site_id
); --p_calling_prog IN VARCHAR2 DEFAULT 'NOT ISETUP'
-- pos_vendor_pub_pkg.update_vendor_site (p_vendor_site_rec => l_vendor_site_rec
-- , x_return_status => x_return_status
-- , x_msg_count => x_msg_count
-- , x_msg_data => x_msg_data
-- ap_vendor_sites_pkg.update_row(
-- p_vendor_site_rec => l_vendor_site_rec,
-- p_last_update_date => sysdate,
-- p_last_updated_by => l_user_id,
-- p_last_update_login => l_last_update_login,
-- p_request_id => l_request_id ,
-- p_program_application_id => l_program_application_id,
-- p_program_id => l_program_id,
-- p_program_update_date => sysdate,
-- p_vendor_site_id => l_vendor_site_id);
fnd_file.put_line (fnd_file.LOG
, 'Return Status:' || x_return_status
IF x_return_status <> fnd_api.g_ret_sts_success THEN
IF x_msg_count >= 1 THEN
FOR i IN 1 .. x_msg_count LOOP
IF l_error_reason IS NULL THEN
l_error_reason :=
l_error_reason
|| ','
|| SUBSTR (fnd_msg_pub.get (p_encoded => fnd_api.g_false)
, 1
, 255
|| SQLERRM;
ELSE
l_error_reason :=
l_error_reason
|| ','
|| SUBSTR (fnd_msg_pub.get (p_encoded => fnd_api.g_false)
, 1
, 255
|| SQLERRM;
END IF;
--DBMS_OUTPUT.put_line ('Supplier Site API Error-' || l_error_reason);
fnd_file.put_line (fnd_file.LOG
, 'Supplier Site API Error-' || l_error_reason
END LOOP;
END IF;
ELSIF x_return_status='S' THEN
--DBMS_OUTPUT.put_line ('Supplier Site API Success-' || l_error_reason);
fnd_file.put_line (fnd_file.LOG
, 'Supplier Site API Success-' || l_error_reason
END IF;
END LOOP;
COMMIT;
EXCEPTION
WHEN OTHERS THEN
--DBMS_OUTPUT.put_line ('Error-' || SQLERRM);
fnd_file.put_line (fnd_file.LOG
, 'Error-' || SQLERRM
END xx_vat_wo172304;
END xx_wo172304_test;Hi,
I'm unable to update the vat code column of the ap_supplier_sites_all table using the ap_vendor_pub_pkg.update_vendor_site API.Oracle application instance 12.1.3 and OS linux.Please find the code below.I'm able to update other feilds,but not the vat_code.Please help on this.
Thanks,
Abhilash
CREATE OR REPLACE PACKAGE BODY APPS.xx_wo172304_test
AS
PROCEDURE xx_vat_wo172304 (
errbuf OUT VARCHAR2
, retcode OUT VARCHAR2
IS
CURSOR cur_vat
IS
SELECT site.*
FROM apps.ap_suppliers supp, apps.ap_supplier_sites_all site
WHERE site.vat_code IN
('CZ OEUS 20', 'CZ OEUZ 20', 'CZ OJCD 20', 'CZ OT20', 'CZ-20-EDC', 'OEUS20', 'OEUZ20', 'OPP20E'
, 'OS20', 'OT20')
AND supp.vendor_id = site.vendor_id
AND site.org_id IN (608, 1508, 2396, 2397)
AND site.vendor_site_id =68154;
l_vendor_site_rec ap_vendor_pub_pkg.r_vendor_site_rec_type;
l_vat_code ap_supplier_sites_all.VAT_CODE%TYPE;
l_vendor_site_id ap_supplier_sites_all.vendor_site_id%TYPE;
x_return_status VARCHAR2 (100) := NULL;
x_msg_data VARCHAR2 (1000) := NULL;
x_msg_count NUMBER := NULL;
l_error_reason VARCHAR2 (2000) := NULL;
l_user_id number := FND_GLOBAL.USER_ID;
l_last_update_login number := FND_GLOBAL.LOGIN_ID;
l_program_application_id number := FND_GLOBAL.prog_appl_id;
l_program_id number := FND_GLOBAL.conc_program_id;
l_request_id number := FND_GLOBAL.conc_request_id;
BEGIN
-- mo_global.init ('SQLAP');
FOR rec_vat IN cur_vat LOOP
IF rec_vat.org_id = 608 THEN
IF rec_vat.vat_code = 'OEUS20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUS21';
ELSIF rec_vat.vat_code = 'OEUZ20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUZ21';
ELSIF rec_vat.vat_code = 'OPP20E' THEN
l_vendor_site_rec.vat_code := 'CZ OPP21E';
ELSIF rec_vat.vat_code = 'OS20' THEN
l_vendor_site_rec.vat_code := 'CZ OS21';
ELSIF rec_vat.vat_code = 'OT20' THEN
l_vendor_site_rec.vat_code := 'CZ OS21';
END IF;
ELSIF rec_vat.org_id = 1508 THEN
IF rec_vat.vat_code = 'CZ OJCD 20' THEN
l_vendor_site_rec.vat_code := 'CZ OJCD21';
ELSIF rec_vat.vat_code = 'CZ OEUS 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUS21';
ELSIF rec_vat.vat_code = 'CZ OEUZ 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUZ21';
ELSIF rec_vat.vat_code = 'CZ OT20' THEN
l_vendor_site_rec.vat_code := 'CZ OT21';
END IF;
ELSIF rec_vat.org_id = 2396 THEN
IF rec_vat.vat_code = 'CZ OEUZ 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUZ 21';
ELSIF rec_vat.vat_code = 'CZ OJCD 20' THEN
l_vendor_site_rec.vat_code := 'CZ OJCD 21';
ELSIF rec_vat.vat_code = 'CZ OT20' THEN
l_vendor_site_rec.vat_code := 'CZ OT21';
ELSIF rec_vat.vat_code = 'CZ-20-EDC' THEN
l_vendor_site_rec.vat_code := 'CZ-21-EDC';
END IF;
ELSIF rec_vat.org_id = 2397 THEN
IF rec_vat.vat_code = 'CZ OEUS 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUS 21';
ELSIF rec_vat.vat_code = 'CZ OEUZ 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUZ 21';
ELSIF rec_vat.vat_code = 'CZ OJCD 20' THEN
l_vendor_site_rec.vat_code := 'CZ OJCD 21';
ELSIF rec_vat.vat_code = 'CZ OT20' THEN
l_vendor_site_rec.vat_code := 'CZ OT21';
ELSIF rec_vat.vat_code = 'CZ-20-EDC' THEN
l_vendor_site_rec.vat_code := 'CZ-21-EDC';
END IF;
END IF;
l_vendor_site_id := rec_vat.vendor_site_id;
l_vendor_site_rec.org_id := rec_vat.org_id;
l_vendor_site_rec.vendor_id := rec_vat.vendor_id;
--l_vendor_site_rec.vendor_site_code:='318581-MOR. KRU';
l_vendor_site_rec.rfq_only_site_flag := 'Y';
-- l_vendor_site_rec.last_update_date := SYSDATE;
l_vendor_site_rec.last_updated_by := 1134; MARTIN.ROUNDS
-- DBMS_OUTPUT.put_line ('VAT CODE:' || l_vendor_site_rec.vat_code);
--DBMS_OUTPUT.put_line ('Vendor Site Id:' || l_vendor_site_id);
fnd_file.put_line (fnd_file.LOG
, 'VAT CODE:' || l_vendor_site_rec.vat_code
fnd_file.put_line (fnd_file.LOG
, 'Vendor ID:' || rec_vat.vendor_id
fnd_file.put_line (fnd_file.LOG
, 'Vendor Site Id:' || l_vendor_site_id
fnd_file.put_line (fnd_file.LOG
, 'RFQ ONLY SITE FLAG:' || l_vendor_site_rec.rfq_only_site_flag
ap_vendor_pub_pkg.update_vendor_site (p_api_version => 1
, x_return_status => x_return_status
, x_msg_count => x_msg_count
, x_msg_data => x_msg_data
, p_vendor_site_rec => l_vendor_site_rec
, p_vendor_site_id => l_vendor_site_id
); --p_calling_prog IN VARCHAR2 DEFAULT 'NOT ISETUP'
-- pos_vendor_pub_pkg.update_vendor_site (p_vendor_site_rec => l_vendor_site_rec
-- , x_return_status => x_return_status
-- , x_msg_count => x_msg_count
-- , x_msg_data => x_msg_data
-- ap_vendor_sites_pkg.update_row(
-- p_vendor_site_rec => l_vendor_site_rec,
-- p_last_update_date => sysdate,
-- p_last_updated_by => l_user_id,
-- p_last_update_login => l_last_update_login,
-- p_request_id => l_request_id ,
-- p_program_application_id => l_program_application_id,
-- p_program_id => l_program_id,
-- p_program_update_date => sysdate,
-- p_vendor_site_id => l_vendor_site_id);
fnd_file.put_line (fnd_file.LOG
, 'Return Status:' || x_return_status
IF x_return_status <> fnd_api.g_ret_sts_success THEN
IF x_msg_count >= 1 THEN
FOR i IN 1 .. x_msg_count LOOP
IF l_error_reason IS NULL THEN
l_error_reason :=
l_error_reason
|| ','
|| SUBSTR (fnd_msg_pub.get (p_encoded => fnd_api.g_false)
, 1
, 255
|| SQLERRM;
ELSE
l_error_reason :=
l_error_reason
|| ','
|| SUBSTR (fnd_msg_pub.get (p_encoded => fnd_api.g_false)
, 1
, 255
|| SQLERRM;
END IF;
--DBMS_OUTPUT.put_line ('Supplier Site API Error-' || l_error_reason);
fnd_file.put_line (fnd_file.LOG
, 'Supplier Site API Error-' || l_error_reason
END LOOP;
END IF;
ELSIF x_return_status='S' THEN
--DBMS_OUTPUT.put_line ('Supplier Site API Success-' || l_error_reason);
fnd_file.put_line (fnd_file.LOG
, 'Supplier Site API Success-' || l_error_reason
END IF;
END LOOP;
COMMIT;
EXCEPTION
WHEN OTHERS THEN
--DBMS_OUTPUT.put_line ('Error-' || SQLERRM);
fnd_file.put_line (fnd_file.LOG
, 'Error-' || SQLERRM
END xx_vat_wo172304;
END xx_wo172304_test; -
I am unable to update the newest version of itunes because I need to update my Mac OS X to version 10.6 or later but my computer keeps telling me that I do not have any updates available. I am currently running version 10.5.8
You need to buy 10.6 on DVD.
(74703) -
I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question). I haven't had this issue before, I have always used the content library on the screen but haven't used this for about a month. How can I make the Content Library available?
Thanks so much! I am backing up the entire computer now with an external hard drive - this should be fine right? And surely if I am backing up the whole computer these projects/videos will be backed up too? I wasn't sure how to do this any other way and I am clearly not great with tech issues. Once this is done and I am sure my projects/videos are safe I will do the delete and reinstall bit. Thanks for taking the time to help
-
I am unable to update the iOS 2.2.1 to next version
i am unable to update the iOS 2.2.1 to next version
What happens when you connect to computer and update via iTunes?
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
You need itunes 10 or later and that requires OSX 10.5.8 or later
You have a 2G (vi the SN yo provided) and that can go as high as 4.2.1 -
I was in Singapore when I created this Apple ID and payment information. Now I am have shifted to India and I am unable to update the Country and Payment related information. When I click on country no option comes up. Can somebody suggst anything?
Hi Peyush!
You may want to try changing the country associated to your Apple ID from your iOS device. I have an article for you here that I believe will help you change the country for your signed in Apple ID:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Specifically, this is the section of the article you will want to pay attention to:
Change your iTunes Store country
Sign in to the account for the iTunes Store region you'd like to use. Tap Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information.
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Unable to update the ADMPlugin.api
When I try to install the aics2_12_0_1update.exe for my Illustrator CS2 (12.0) I get the error,
"Unable to update the ADMPlugin.api
The file on your system does not match the original Illustrator 12.0 file expected and it cannot be updated."
I have WXP SP3 and the entire CS2 suite installed.
Any ideas?
J.R.>...when I worked for Adobe® Systems.
Are you running a beta version of AI 12 by any chance?
That would certainly explain the error message you're getting. As you must know, Adobe updaters are rigorous in their version checking and won't work on non-retail versions. -
I have an 1st generation ipad. I am unable to update the software beyond 5.1.1. Why?
I have an 1st generation ipad. I am unable to update the software beyond 5.1.1. Why? It tells me my software is up to date.
Very possible.
You can often get the older version if you buy directly on the iPad
Go through the iTunes Store on your old iPad and purchase netflix, if you can get an older version of the app, iTunes will ask and prompt the download of older version.
Not all apps will be available.
I was able to put iBooks on my older iPod this way. -
I am unable to update the TomTom Canada&US
I am unable to update the TomTom Canada&US purchased in July 2011 for my iPhone 4. The update doesn't load, and I can no longer use the app which has become inactive. Any hints?
Have you tried downloading the app using iTunes on your computer, then syncing your iPhone with the computer?
-
FRM-40509: ORACLE error : Unable to update the record.
Hi,
I am having the following code in delete button.
declare
v_button NUMBER;
begin
IF :CHNG_CNTRL_JOB_DTLS.SENT_DATE IS NULL THEN
v_button := fn_display_warning_alert( 'Do you want to delete the version ?');
IF ( v_button = alert_button1 )
THEN
message('before insert');
insert into chng_cntrl_job_dtls_log
select * from chng_cntrl_job_dtls
where job_name = :CHNG_CNTRL_JOB_DTLS.job_name
and job_version_no = :CHNG_CNTRL_JOB_DTLS.job_version_no
and sent_date is null;
message('before delete');
delete from CHNG_CNTRL_JOB_DTLS
where job_name = :CHNG_CNTRL_JOB_DTLS.job_name
and job_version_no = :CHNG_CNTRL_JOB_DTLS.job_version_no
and sent_date is null;
message('before commit');
silent_commit;
go_item('CHNG_CNTRL_JOB_DTLS.JOB_NAME');
P_DELETE_SET_PROPERTY;
clear_form;
ELSIF ( v_button = alert_button2 )
THEN
null;
END IF;
ELSE
p_display_alert('Version '||:CHNG_CNTRL_JOB_DTLS.JOB_VERSION_NO||' for the job name '||:CHNG_CNTRL_JOB_DTLS.JOB_NAME||' cannot be deleted.','I');
END IF;
exception
when others then
message ('Exception in delete version button');
end;when i am trying to save it says " *FRM-40509: ORACLE error : Unable to update the record*." .
i am getting message till before commit.
i am not able to check the error message in help as it is diabled in our form builder.
I have checked the privileges also. they are fine.
Please advice.
Edited by: Sudhir on Dec 7, 2010 12:26 PMThis error does not come from your procedure code, but from Forms itself. If you are in a database block, change something, and do a commit (either via a Forms key or in your own procedure), Forms commits the changes. For some reason this is not possible. You can see the database error via the Display Error key (often Shift-F1).
I see in the OP that this key is disabled. Change the on-error code then:
begin
message(dbms_error_code||'-'||dbms_error_text);
raise form_trigger_failure;
end; Edited by: InoL on Dec 7, 2010 8:50 AM -
I am unable to update the apps
i am unable to update the apps in my phone, 11apps are required the update
Any restrictions set up in Settings/General/Restrictions? If yes, disable them.
Are you logged into your account in Settings/iTunes&AppStore with the correct Apple ID?
Any error messages given? -
Browser unable to update the service status bits
I am having an issue with my computer becoming non-working. After a period of time of inactivity and then I go to use the computer, I can move the mouse cursor around but can do nothing else. I have noticed that when moving the cursor around that when I move it to the task-bar I get the hour glass waiting icon. I checked the event viewer and in the applications log I have numerous errors which say "The browser was unable to update the service status bits" Can you explain this and are there any fixes? Thank you
Hi Avinash,
Yes, CTS_BROWSER service is active. It was working before when I click to test. Unfortunately, it started throwing error. We are on SP13 in SOLMAN. I'm using solman as an ABAP stack.
Thanks for your time. -
Icloud and Windows 7 - unable to update the favorites icloud"
Icloud and Windows 7
Icloud Message:
"unable to update the favorite icloud"
Thank you for your help.Many of us had the same problem. If you scroll thru the questions, you'll see your same question/problems dating back over a month ago when the new update first came out. The Apple Software Updater just showed blank, it didn't show the update. I patiently waited, knew it wasn't my computer since scores of us were having same problem not being able to do the update. Knew eventually Apple would fix it. Lo & behold when I signed on to my computer today a window popped up from Apple Software telling me updates were available & I clicked the "download" and it downloaded just great. I was able to sync my Ipod and Ipad to it just fine, etc. So probably if you can just wait...is your current ITunes working? If so, wait. Looks like there is a fix coming to all of us.(Note, that the "update" pop up window was different than the little window you've probably been seeing on your ITunes screen. This one didn't come up when I opened up ITunes. It popped up on my desktop. I have Win 7. Good Luck.
-
MSI H61M-P21 (B3) - Won't start, how can I update the BIOS?
Hello Everyone!
I just bought an MSI H61M-P21 (B3) Motherboard along with Intel Celeron G530 Sandy Bridge (2.4 GHz) and 1 DIMM of 4GB DDR3 1600 KingMax. I use NJOY 500W true power as power supply. The system starts but no image, no beep code, nothing... Testet with another DIMM of RAM (4GB DDR3 1333 KingMax), but no luck. Tested with another power supply (450w true power), no luck again. I have tested the motherboard out of case, put on an antistatic surface, no luck... Reset CMOS, same situation: no image, no beepcodes... On the Main BIOS Chip of the motherboard is a little sticker on which is written "E7680IMSH30" - i guess that the motherboard comes 'shipped' with 7680vH3 BIOS.
Is there a possibility to update the bios without replacing the CPU or send the board to RMA? I'm almost sure that the problem is around here...
Thanks in advance! Any answer is welcome!
P.S.: I appologise for my bad english.Good morning.
I've tested the motherboard this weekend with another DIMM of 4GB DDR3 1333, ThermalTake PSU (500W, i don't remember the model) and Core i3-2120 CPU - those components were taken from another IDENTICAL motherboard H61M-P21 (B3) with same version of BIOS. Didn't worked... I have tested my Celeron CPU G530 on the functional H61M-P21 (B3) and it's working...
So, there is a problem with my mainboard, i will send it to warranty.
Thanks a lot. Have a nice day!
Maybe you are looking for
-
I was trying to restore pics from the trash bin & accidentally sent them all to the desktop. Now when I turn my computer on it freezes or won't do anything other than load all these pics to the desktop. Of course I haven't done a time machine ever, s
-
JVM causes windows XP to crash
I've recently received two new computers from our IT dept, both are running the latest patched version of Windows XP. On one I am using Netbeans and have found that it occasionally causes the machine to become unresponsive, then recover and then to g
-
asking for an address and not mine and I am the owner of this device and I can not pave if there is a possibility of me to help me open it with my address as I opened before
-
Error: System not configured as XI Integration Engine
Hi All, I a getting this following error in RWB-->message monitoring -->adapter engine -->audit log "2007-11-29 09:28:45 Error Received XI System Error. ErrorCode: SYSTEM_NOT_CONFIGURED_AS_XMB ErrorText: ErrorStack: System not configured as XI Inte
-
Customizing Spry Tabbed Panels
I am trying to create my very first spry tabbed panel. I have a 5 tab panel. Instead of plain text on a colored background, I would like to have customized tabs with the text already on them, along with a "on mouseover" version. I am actually using i