Msi k8n neo plat and evga geforce 6800gt

hey guys,
i got a MSI K8N NEO Platinum
athlon 64 3400+
1 gb ddr400 ram
400 watt psu
sound blaster audigy 2 value
evga geforce 6800gt 256 agp
and i get this problem, for example when playing farcry at full settings, after a few mins the screen either goes black (no signal) or multi coloured blocks then black and the sound stutters in the background.anyone knows anything abt this??
thanks

https://forum-en.msi.com/index.php?PHPSESSID=28e8b34c11c189f3cf4fd87517f09849&topic=76872.msg541977#msg541977
check this out m8, could be somerthing to do with it.
Also make sure you got latest drivers etc etc.
Try disabling the Nvidia/ati speed up setting in bios. hit shift + f2 alt + f3 I think in bios - brings up these options

Similar Messages

  • Msi k8n neo plat and microsoft ie

    getting my msi k8n neo plat board running satisfactory , except for one problem . when i got to amdmb.com, i start surfing the site, and after a minute or 2, i get a microsoft ie error, send the error report to microsoft, and then ie closes. what is the problem , is it with amdmb.com site? its the only site that this problem with ie is present, all other sites i don,t have this problem

    just tryed using the browser firefox, and it works great.  its just ie that doesn,t work on amd.mb, and only that site. wierd problem, never experienced anything like it before. had run a short memtest , no errors.  the 6800gt , msi k8n neo plat and amd 64 3400 work great. get some super madonion benchmarks-all default-1024 x 768 32bit- 22,755. i was hoping for 22,000, but exceeded my expectations. can get into the 23,000 + with overclocking the 6800gt, have had it overclocked at gpu-412, memory 1.12. not sure how much more you can increase the numbers, thinking my gpu is close to the limit at 412.had a problem with windvd, it ended up being a configuration in windvd- had to enable hardware acceleration , bingo- worked great after that. got my corsair xms pc 3200 to work at 6-3-3-2 timings. still getting to know the board,  there is definately a learning curve to be delt with on this board, but i am getting it to work better by the day.

  • Msi k8n neo plat and 3dmark03

    with my msi k8n neo plat , bfg 6800gt, and amd 64 3400 clawhammer- i get 11,114 in 3dmark03. seems like i should be getting a higher score-any suggestions.

    You appear to have misread my post, read carefully, I said "at clock speeds" not "at stock speeds" which I think is where u misunderstood. I know it's overclocked, but who isn't going to if there is so much headroom? With coolbits you can have higher speeds when running 2d or 3d applications to keep temps low and for longevity of the card.

  • Msi k8n neo plat and audio problem

    got me a msi k8n neo plat, great board but have a few minor problems that i have noticed. one is the audio problem i have- when i listen to winamp, and surf, i will loose my winamp connection surfing, and then have to start winamp. is this a bios thing, or nvidia platform or chipset problem?

    Hi
    Thats the Nvidea board, this is the via board forum. You want forum below this one, as they will be able to help better.
    good luck
    jocko

  • MSI K8N Neo Plat and 6800 Ultra

    I just got a BFG 6800 Ultra from a friend yesterday. Worked great for him the whole time he had it. I just put in a new 550 watt PSU because I read it requires a lot of power. Put it in, fan turns on, card seems to get power just fine. Just loading up and going through BIOS is like a matrix, everything is jumbled around and impossible to read. Windows will not boot, get a black screen. I can run in safe mode with a slightly messed up background. Under settings it does not detect any kind of card, but under device manager it is listed, and I did install drivers. Not sure what the problem could be, I messed around with what I could see in BIOS, turned off fast write and such. Any ideas? Thanks.

    If you previously had an ATI card you will need to totally remove the old drivers & it's a good idea to replace them with newer versions regardless.
    Simply uninstalling usually isn't enough, because there's always "leftovers". There's a free utility called Driver Cleaner (Google for it) that will remove all traces of the old drivers.
    Also, if you are running a Neo 2 Platinum (AGP graphics) there's some other things to be aware of as far as BIOS settings.
    - Disable ATI/Nvidia Speedup. This tries to OC the bejeebus out of your vid card & usually with bad results.
    - Disable Fastwrites as well. This is a known NF3 chipset/6800 issue. One would think that Nvidia parts would "play nice" together - Go figure.

  • Overclocking msi k8n neo plat

    trying to overclock my msi k8n neo plat and run mad 2001
    hardware - amd 64 3400
    bfg 6800gt
    corsair pc3200
    i go into bios and set ram at 400mhz, set agp at 67 mhz. then open center and enter 210 mhz fsb. when i start madonion, it freezes. is it my memory?

    Could be a ram incompatibility issue.  I have some OCZ pc3500 EL which is great in my other systems, but doesn't work in the Neo without bluescreens and crashes to desktop.  It might also be a power related issue.  What type of power supply are you using and what is the amperage on the 12v rail?  That seems to be pretty important for this board.

  • MSI k8N Neo Plat 2...system freeze and crash during h-end gaming...

    MSI k8N Neo Plat 2
    AMD athlon 64 3800+
    Centon 512 MB DDR 3200 x 4
    nvidia geforce fx 5700
    win xp pro
    Creative Audigy 2
    Under some graphically intensive situations, during gaming,  especially dealing with alot of background visuals, like fire/lava, etc, the system will after a short while of playing either, crash, freeze, reboot, or freeze while a loud screeching nosie emits from my speakers...I have tried updating my graphx card drivers to the most recent and the symptons still persist..Is there something I need to set in BIOS regarding mem timings, I have tried playing around some, but that hasnt worked either...Any help would be greatly appreciated !!!
    ,

    Try raising RAM voltage to 2.7v - 2.8v.
    If no go - Run Memtest86 http://www.memtest.org/#downiso
    If no go -  Try onboard Audio ( disable / remove Audigy2 )

  • MSI K8N Neo Plat edit. and IDE

    Can anybody tell me how many IDE units you can run on this motherboard? I do not want to use raid 0 or 1.  I have a KT3 ultra - aru at them moment with 6 single IDE units, but now I need to upgrade.
    Thanks for any help.

    Hi,
    you can connect 4 IDE devices and 4 four sata devices on MSI K8N Neo Plat editition.
    If it's not enought you can plug an IDE PCI card....

  • Msi k8n neo plat nforce3 250gb : blue screen

    hi
    just built a amd 64 3400 with msi k8n neo plat: with xfx 256 geforce nvidia graphic n kinston 512 ddr 400.
    but for some reason its giving the blue scree with dumping memory msg on the screen.changes the memory but still got the same problem updated the bios to 1.5 still same thing.
    any cue with the problem.
    thnks

    System restore? You need to find out what's causing the problem and you have too many things connected to it to be able to figure out what it is, always start with a basic system - video, primary hard disk, cd + fdd, no more and nothing else connected. Then when something goes wrong along the way you'll have more chance of narrowing it down if the problem appears.
    What you'll want to do now is disable/uninstall/unplug any additional non-system-critical components that you have connected to it such as extra usb slots, printers, scanners and anything else. Keyboard, mouse, video with no sound and see if the problem persists. If it does, try another video driver. If it's fixed then reconnect/enable one device and try again until the problem reappears and you can find out what's causing it -- unless you can speed read that message quickly before it shuts down
    Now that I think of it, have you set the OS to not automatically reboot on any errors? That might keep the BSOD up there so you can note it down and hopefully point at the problem instead of going through all the above hassle ^^

  • Msi k8n neo plat problems

    I have built 2 computers exactly the same.
    msi k8n neo plat
    512 corsair xms ddr 3200
    8og sata maxtor
    amd 64 3200
    128mb ati 9800 pro
    asus cd drive
    When i tried to install windows xp pro on both the machines i got the same error. could not copy file. On each try the file was a different one. After hours of trying new things i found that putting the memory in slot 2 on the motherboard  solved the problem, windows installed and booted up as norm. When i moved the memory back to slot 1 the computer would not boot.
    I have now left the memory in slot 2 but the computer will still crash every hour.
    I am sure this is something to do with the memory but not sure what the problem is.
    Can anyone help.

    Can anybody tell me what i should set the cpu fsb frequency to in the bios.
    I just read this in the faq
    What is the fsb speed of this cpu?
    Depending on which FSB you are asking about: The Athlon 64's have the memory controller built in (which was previously part of the Northbridge on the motherboard) which uses up to 200MHz DDR Memory (400MHz FSB) The HyperTransport link from the CPU to the rest of the motherboard runs up to 800MHz. Just to expand on my answer... The HT link is 800MHz, but it's 16 bit in size (2 bytes worth of data per clock) the total bandwidth of the HyperTransport link is 3.2GB in total - 1.6GB sending data to CPU and 1.6GB receiving data from CPU.

  • MSI K8N NEO PLAT + CD / DVD-RW Drives

    Hi, i have the msi k8n neo plat. I recently had to replace my old mobo due to the old power supply blowing or something. So i got me a 480watt enermax coolergiant psu. Replaced the mobo for a new msi k8n neo plat. Put the mobo in and psu. Working fine and dandy. Now i installed 64bit xp to primary, and ive had it running for for about 2 weeks. Went to install linux to the second hard drive, so i changed the boot order, saved settings and went to load disc...however now my cd and dvd drives dont work, and they dont work in windows either.

    Can anybody tell me what i should set the cpu fsb frequency to in the bios.
    I just read this in the faq
    What is the fsb speed of this cpu?
    Depending on which FSB you are asking about: The Athlon 64's have the memory controller built in (which was previously part of the Northbridge on the motherboard) which uses up to 200MHz DDR Memory (400MHz FSB) The HyperTransport link from the CPU to the rest of the motherboard runs up to 800MHz. Just to expand on my answer... The HT link is 800MHz, but it's 16 bit in size (2 bytes worth of data per clock) the total bandwidth of the HyperTransport link is 3.2GB in total - 1.6GB sending data to CPU and 1.6GB receiving data from CPU.

  • Msi k8n neo plat : blue screen

    hi
    just built a amd 64 3400 with msi k8n neo plat: with xfx 256 geforce nvidia graphic n kinston 512 ddr 400.
    but for some reason its giving the blue scree with dumping memory msg on the screen.changes the memory but still got the same problem updated the bios to 1.5 still same thing.
    any cue with the problem.
    thnks

    Duplicate Thread
    https://forum-en.msi.com/index.php?threadid=72851

  • MSI K8N Neo Platinum and DTR

    Heya fellas,
    I was wondering if anyone know whether or not the new MSI K8N Neo Platinum will have support for the AMD Athlon 3200+ DTR chip?  I know some boards have had trouble with them and I'm hoping that this one, since its a new reviision, will conflict with it.
    Thanks,
    -Ish-

    If that's the "Newcastle" version of the 3200+, it is supposed to work!

  • MSI K8N NEO platinum and MOBILE chips

    I just found out a problem with MSI K8N NEO Platinum.
    I recently upgraded my cpu from Clawhammer DTR 3200+ 1.5V to Clawhammer Mobile 3400+ 1.4V (hoping for better overclocking). To my surprise the mainboard can no longer raise the VCore voltage over 1.45V (it doesn’t matter if I select in the bios 1.5 or 1.55V). The only working option is raising de VCore by 3.3% 5% 8.3% 10%, resulting in a maximum VCore of 1.45 + 1.45 x 10% = 1.6V
    I did some googeling and found there is a VCore issue with the K8N NEO and mobile chips, although DTR chips are fully supported (working VCore and multiplier adjustments).
    I am using the latest beta bios 1.56B (moded by Pinochio)
    Did any of you found a way to resolve this problem? IT IS DRIVING ME INSANE!!!

    Bad post...

  • Problems with msi k8n neo-2 and xfx 6800 card

    is this card incompatible with the msi k8n neo-2 motherboard?
    i ve got this mobo last week and when i tried to install the card to it nothing comes on screen, no beeps or nothing, ive changed the power supply, the card works fine on my old pc with both power supplies (old pc was 2500+ amd with epox 8rda+) i ve tried booting up with nothing else connected on the psu except the card itself, it still doesnt seem to work, the new motherboard works fine with my old radeon 9600 pro.
    What can i do?

    Thats not what I read (assuming this is the same correct model)
    420W double unit
    DC O/P Load Max
    +5V 42 Amp.
    +12V 16 Amp.
    +3.3V 28 Amp.
    -5V 0.5 Amp.
    -12V 0.8 Amp.
    +5VSB 2 Amp.
    Agreed that one is 420W, but is that it or not?

Maybe you are looking for

  • Projector and ibook g4

    hi guys how do a screen projector work with ibookg4, is it simply just plug and play? or do i have to set something in my g4 to make the projector work? thanks in advance!!!

  • Why can't I easily search on demand for a movie that I''m currently watching?

    This may seem like a silly question but it's something no one can really answer but everyone I ask thinks its a great idea.  I'll set the situation up:  I change the channel to HBO and I see a movie (let's say Gladiator) is already playing and it's a

  • I have an unwanted quicktime movie playing in the background.

    I was watching a youtube iMovie video.  I quit QuiickTime Player, but a little later it started to play again. It is still playing, but QT Player is not running. I have checked every browser tab I have open. I have checked Finder and it is not showin

  • Speech recognition of Address Book help

    When you turn on Address Book, in Speech, you can click on configure, and there are only a couple names. Is there a way to expand the list or edit the names? (I don't really care, even if it means to alter system files and stuff)

  • UCM 11g - Hide documents by type. Modify QuickSearch.

    Hi all I need to modify the search to hide contents of type 'TypeToHide'. This rule does not apply to sysadmin To achieve this in the main search do this: <@dynamichtml query_add_field_query_script@>      <$if (not UserIsAdmin)$>           queryText