MSI Nvidia NX6200 black screen problem

Hi,
i'm having this problem with my MSI Nvidia NX6200.
im using windows xp-service pack 3.
Everything was working fine, then, a few days ago i started the computer and i opened some programs, and suddenly, the monitor screen goes to black and the monitor goes off(like if i just shut down the computer), then after a few seconds, the monitor powers goes on, and a blue screen is shown with a message that said something like this:
""The computer needs to shut down.
The problem seems to be in the file: nv4_disp""
So i restarted windows several times, and everytime the same thing happens.
So i logged into windows in safe mode and unistalled the graphic card drivers, restarted windows,
and the system started correctly this time, but with no drivers.
so,
what can i do so the graphic card goes back to normal and with the drivers installed?
thanks.

Quote from: Henry on 31-August-09, 07:17:04
Yes those are capacitors that are blown. If you know someone with halfway decent soldering skills you could get appropriate new caps and replace them. I know some people can do that and others can't, otherwise you need to replace the card. I did a Google search and found quite a few video cards of various manufacturers and models with blown caps like that. I get a feeling most of them were caused by overheating due to inadequate airflow through the case on cards with passive cooling and on cards with fan cooling, dead fans.
where can i get the new caps?
the capacitators started blowing after one year of buying the card, the five capacitators did not blew at the same time, they blew over a period of 5 or 6 months.
i did heard them blowing, but at the moment i did not knew what it was. it was a sound like a short circuit.
at the end, when the card stopped working, i took it out, and i knew it was that, and i saw them blown.
since i bought that card, i noticed that the power supply fan worked more and made more sound than with the old default card that i had when i bought the pc.

Similar Messages

MSI 290X LE Lightning Edition black screen problem

I recently bought the above graphics card, only to run into problems with black screen, furmark blackscreens when it reaches just over 70c & games that push the card ie Crysis 3 also causes black screen problems, I'm also sometimes getting desktop corruptions, usually after it black screened.
My PSU is a 850watt EVGA SuperNova G2 so i know it's not that what causing the problem.
rest of my setup as follows
3770K @4.2Ghz
MSI Z77 Mpower
8GB corsair memory
ect ect.
Any idea's as to the cause of the problem?
edit here what it doing I've uploaded it to youtube.

First of all remove any oc. Then list specs more detailed: >>Posting Guide<<

How to How to install ATI Radeon HD2600 driver on bootcamp 3.0 windows 7 partition w/black screen problem

Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
The Background/history
I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8. I created a single partitioned drive to install windows 7 professional 64 bit. The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in....
The installation of Windows 7 Pro 64-bit
So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black.... in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
The problem, re-emphasized : I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files? not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run... Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver without having been able to complete the windows 7 installation because the monitor goes and stays black????
This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
---I've been told to install the osx dvd and run "setup.exe" - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/ for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!

hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something? if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean? it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this? just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600? (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc?

I bought my Mac Air 13' in August. Black screen problems constantly happens. I asked some of my friends who also use Air. They share the same experience. Overall, it is a pretty good computer. But it bothers me when I do work and it suddenly goes black.

I bought my Mac Air 13' in August. Black screen problems constantly happens. I asked some of my friends who also use Air. They share the same experience. Overall, it is a pretty good computer. But it bothers me when I do work and it suddenly goes black. What should I do about it?

without more information, I assume you mean a blackout from sleep issue.
Go to system preferences > energy settings > raise the "turn display off" setting up to as needed, say 5 mins. or 10 mins.
AND ...
unchecked the "Put hard disks to sleep when possible" in both the battery and power adapter tabs.
test it and check back

Fifa 12 airplay via appletv, black screen problem

FIFA12 Appletv airplay black screen problem.
Hello, i wanted to play fifa 12 iOS with tv via airplay. But it dint work, i see game picture for half second then tv goes black screen. Audio still working and game i can go to play, but i cant see the game picture. This is very sad because every other game works with tv via airplay. The only game which would be really great with airplay doesnt work :( We tested it with two different tv and two different iPad 3's. And the tv is 40" the other one was much smaller and apple tv is the newest one with newest software.
Has someone else had this problem? is the apple tv problem or maybe fifa 12 have bug or something? i hope we can get this working, iv seen fifa 12 via airplay working very nice in few youtube videos so why it doesnt work for us.
also where would be best place to contact fifa12 makers for this problem.
Sorry for my bad english, it's not my national language.

EA sent me the following anwser:
Please try any the following that you have not tried as of yet:
- Exit the game, then turn off and reset your device. Then try starting the game again.
- Ensure you are running the most current version of the game (check to see if there is an update available for the game through iTunes).
- Access the iTunes Store within your device and download the game again. It may prompt you to 'Buy' the game, but once you click it, it should allow you to download for free since you already paid for it through iTunes. Please note that we at EA have no access to your iTunes account. If you have any disputes, please contact iTunes (Apple) directly.
- Make sure your device has the latest software:
1. Download the latest version of iTunes from http://www.apple.com/itunes
Note: If you already have iTunes installed, open it and select Help > Check for Updates. Then install any available updates.
2. Connect your device to your computer with the USB cable, select your device in iTunes, and click the 'Update' button or 'Check for Update' button. Install the software update if available.

Not happy with Mac book pro retina because of black screen problem.

I am not happy with Mac book pro retina because of black screen problem. This screen failure appears after one year. I was fan of APPLE now I do no support any apple products. When they expires I will renew them with the other products belong to the other companies.

You are entitled to 90 day telephone support from Apple. Try contacting them.
Apple Support Contact
Apple Support contact - Telephone

What is the technical 'cause' of the infamous iMac black screen problem?

Can anybody shed some light on what technical malfunction exactly causes the infamous iMac black screen problem? The common solution seems to be a logic board replacement. But what exactly is broken on the logic board? Is it the Geforce chip? Some kind of external driver circuitry? Or something completely different?

I was referring to the many problems also described in this thread (and also in many other places):
http://discussions.apple.com/thread.jspa?threadID=196774&tstart=0
In specific I am referring to machines where all of this applies:
- internal monitor stays black after power-on
- computer boots normally
- external display works normally
- internal display backlight works and can be adjusted in brightness, but all pixels are black
- PRAM reset doesn't help
- NVRAM reset doesn't help
- PMU reset doesn't help
- reinstalling OS / booting from CD doesn't help
- machines with this problem sent to repair come back with a replaced logic board
I'm looking for more information on the technical cause of the exact problem as stated above. So I can attempt to repair my iMac

Thunderbolt Firmware 1.1 will not update from 1.0.9 to fix Black screen problem

Can't install the firmware 1.1 fix for black screen problem. I get the following: Has anyone solved how to get around this?

Restoring often solves these problems - sometimes requiring as a new phone. The settings a sometimes data get currupted during update. If you go back in the archives of this forum, you find the same problems reported after EVERY update since the original iPhone was released.
Note that if you "modified", unlocked or hacked your phone in any way - a reason many stayed on 3.0.1 - updating USUALLY does theses things, if not completely bricking the phone.

Black screen problem and file size

Like others I have been having trouble with importing from iPhoto to iMovie. At times everything works just fine but on my most recent project I have been having a terrible time with the preview screen being black. I have used this discussion forum to try and resolve the problem. I've tried many of the recommedations but the problem continues.
In one thread it was mentioned that file size might have something to do with the problem. I think there may be something to this. I've noticed that any file that is 1MB or less shows just fine in the preview window. Files between 1-2 MB seem to have an erratic pattern of loading and files above 2 will hardly ever load.
Unfortunately I seem to have a lot of photos in the latter category (taken on a recent trip to New Zealand). I'm hoping someone can give me some hints on how to reduce the size of these files in a "batch" fashion. Perhaps via Photoshop?
Also, has anyone else noticed any connection between file size and the black screen problem.
Thanks.
Alice
iMac G5 Mac OS X (10.4.8) iLife '06
iMac G5 Mac OS X (10.4.8) iLife '06

Matti,
Thanks for the reply but that isn't the problem I'm having. I've read plenty about not emptying the trash and have not done that.
The problem I'm having happens before the picture is even put in the timeline. When I click on media, go to iphoto and highlight a picture that I want to place in the timeline I will get a black preview screen with the scrubber arrow running across the bottom. Through a rather tedious process I think I have determined that the problem is related to file size. If the jpeg file is greater than 3MB it will not load. Jpeg files under 1MB load wonderfully. Those between 1-2MB are erratic in whether they load or not.

Black Screen Problem on my Toshiba Portege M800-A330

I own a Toshiba Portege M800-A330 for more than a year now. Whenever I have problem on it, uhmm.. for example: virus, or corrupted operating system, all I do is to format my laptop or recover it using system recovery from the hard disk or using recovery disc which is inserted in the DVD drive. But, recently I'm having a problem with my laptop. My problem starts after I compressed the Drive C:, but I don't think that may cause the black screen problem that I'm encountering since then.
Here goes my problem: When turning on my laptop, the first thing I can see is the "TOSHIBA" logo and then after it fades it just gives me a black screen. I don't know why it's just black screen, perhaps its system has been corrupted. I've tried using the system recovery for the Nth times, but sadly the ability to run the system recovery from the hard disk partition also FAILED and just gives me a black screen again. When pressing "number 0" it does not direct me to the recovery features of the notebook but instead it only put me on a black screen. Likewise when I use the recovery disc, it also put me on a black screen upon entering in the DVD drive, and so as when I'm trying to reformat my laptop with Windows7.
I can't even access the safe mode options of my notebook. All I can access is the CMOS/BIOS setup features of the notebook when pressing F2.
Please help, I don't know what or where the problem maybe and what could be the possible solution on this. Any help is greatly appreciated.
Thank you,
Selene

selene wrote:
thanks for your input wkitty.. I have the same problem with this guy who post this > http://laptopforums.toshiba.com/t5/Video-Display/Blank-screen-after-BIOS/td-p/79923
I dont know how can i recover the the HD partition with vista installed.. do this mean I really have to send my laptop to Toshiba service center? It will cost a lot of money, my laptop's warranty already expired.
while i understand that the outlooking symptoms may appear the same, you report that you compressed your C drive but the poster in the linked thread does not... sadly, the underlying problem may or may not be the same even though the surface symtoms appear to be so...
unfortunately, i don't know what to recommend and i feel that i must leave further answers to other support members who have better knowledge than i :?
in my own case, i've finally determined that i must purchase the reload disks from toshiba and hope that they are able to restore my machine to the original factory condition... in you case, i can't say that this is the way to go or not... it really sounds like something either BIOS or OS oriented... since the BIOS reset didn't take care of the problem, it may be something deeper (ie: video broked) or something else...
have you tried booting a *nix live CD like ubuntu? the idea here is that if a live CD of another OS boots, then there may be something wrong with your HD...
along those lines, have you tried running memtest86+ and/or a HD testing util for the drive in your unit? it is possible that memory has gone uuck or the HD may have a section of bad sectors...
=================================================================================================================
I'm a user, just like you but i'm here on a volunteer basis without compensation from toshiba or anyone else... my crystal ball is in the repair shop and i cannot look over your shoulder to see what you are doing. the more specific you are, the better the answers can be

Black Screen problem on Acer Aspire 5733Z.

The screen on my aspire stays black on switch on. I am able to use a remote monitor. On the odd occassion whilst using the laptop the screen wil suddenly come on, but does not come on again following a switch off?? I have posted this problem before, but in attempting to thank a subscriber's answer using kudus the solution case resolved ticks showed in error. Therefore I still have the black screen problem. Have tried the suggestion of uninstalling adaptor with no success. Any further suggestion much appreciated.

Barnov,
One of the easiest ways to attempt to rule out a hardware problem........is to save all of your important files to a USB backup drive. And then reset your computer to factory condition. It can be a pain to do something like that, but it can save you hours of troubleshooting.
Your computer should have pre-installed Acer software that allows you to reset your PC. There's several videos on this website and also on Acer's YouTube channel that shows you all the different ways to reset your computer.
You should also make a USB recovery drive too. It shows you how to do that too.

Black screen problem on Firefox 33

On Firefox 33, but not on Firefox 32, there is a black screen problem. I was trying to Reset Firefox, but all I got was these black boxes. This even happens when I try to create a new Firefox profile. Can Mozilla fix this for 33.0.1, 34, 35, 36 and other future versions?

I have included a screenshot

Black screen problem when installing msi r9 270x on my intel DP55WB.

Hello everyone...
I bought a new video card msi r9 270x gaming and install it on my old motherboard Intel DP55WB,
When I try to turn on the computer its loading the window 8.1 screen (black screen with windows logo) but then the screen becomes black (but still working) and stays like this!
Is there any solution for my problem?
Thanks.

Quote from: Nichrome on 28-November-14, 04:04:01
Also see >>Posting Guide<<, would be helpful too
Might be either compatibility issue (since your system is pretty old), PSU or simply defective GPU. See above ^

MSI 7970 Lightning GHz Edition, black screen problem

Hi all,
I am very dissapointed on the MSI product now. I bought MSI 7970 Lightning BE GHz Edition, when I don't overclock the graphics card and play games I will get black screen or sometime I will get message that "AMD graphics card stopped responding". So I bought a 950W PSU but still problem is there. If I underclocked the card at 600MHz both GPU and memory clock I don't get the problem. But what's the point of having this card paid $500 for nothing. I am so fed up with this card. Please someone help....
My System Spc :
Asus P8Z77-V LX motherboard
16GB RAM
Core i7 3770
PC Power and cooling MKII 950W PSU
Thanks.

watch the attitude! you have got a faulty card it happens occasionally as all manufacturers have a 1-3% defective rate not just MSI so do not start with your bashing as its against the rules here!
there are hundreds of individual parts on a board and any one can go bad causing a problem so if you are going to bash anyone bash AMD's GPU's as that is the most likely problem here on the card and MSI do not make those so keep your "I learned a lesson about MSI... it's a piece of junk" to yourself !
>>Please read and comply with the Forum Rules.<<

MSI 8800gt BSOD ( black screen )

BLACK screens of death. I was going to post in one of the numerous other threads with this problem but i saw someone get yelled at to make their own thread so here is mine. After playing cod4 for extended periods of time. sometimes and only sometimes my monitor will go black and either the audio will continue as normal... or it will loop. Windows says the nv4.dll got stuck in an infinite loop. Either way i have to hard reboot my computer and its normal again.
http://www.antec.com/us/productDetails.php?ProdID=27500 <--- my psu
i have already clean sweeped the old nvidia driver and have the newest one installed.
gpu max temp 74° after hours of playing crysis.
At this point i wish i was getting artifacts, just so id know i had a bad card.
Edit: oh yeah heres what evenviewer has to say.
The driver nv4_disp for the display device \Device\Video0 got stuck in an infinite loop. This usually indicates a problem with the device itself or with the device driver programming the hardware incorrectly. Please check with your hardware device vendor for any driver updates.

you have a good point it must not be my card it works fine in my friends machine. it also works fine in my machine for the most part. Of course when i plugged it in his machine i didnt put a svideo cable in the back of the card. The problem is, as i previously stated that the problem only occurs when the svideo cable is plugged in and active.
I came here for help, and instead of help i get a message telling me not to bump my post, which was already in the top 3 slots anyways so im not sure if that is really a bump or not. Its not like i bumped it from the second page. Also i get a reply telling me that i have been told tons of things to do, but i do nothing. I think if i come back here and ask for help, it should be assumed i have not just ignored the suggestions and that im still having problems. Almost all the suggestions had already been done before my first post a month ago. The suggestions were also, over a month old, and i will admit i know absolutely nothing about computers... thats why i came here. ...but before i came here i had already done extensive testing on my rig, before i sought outside help. So, contrary to my instincts that a bad cpu clock would not bust a video card.. only when the svideo cable is plugged in. i tested my machine yet again for the same things i did last month, yesterday. For 23 hours I ran orthos, and passed without even a hitch. i even played some bioshock while i was running it. Not the best performance, but it still booted up and ran. I Used a better powersupply, same results. svid in = crash.. svid unplugged = works. I even wasted a month of my time and now cannot return the card to where i purchased it from bc my in store warranty is up. All bc i listened to someone on this forum who said i might have a bad pci slot. The rig passed all the test overclocked, and at stock values. All other test were done at stock stettings. 23 hours is a long time to test something when you already know it works. I really just want to know what is causing this problem. I mean why can't the video card work as intended, when the svideo cable is active. The testing of the cpu so many times is confusing, but i have only recently tried another psu. Maybe when the second monitor(tv) is active it requires more amps. Still very unlikely but i can understand how that would work. Although, 34amps of Antec power on the combined 12v rail, should be way more than enough to power a 8800gt. Im just taking a stab in the dark, but if i had to guess. i would say the memory controller on the video card cant allocate the memory for both monitors correctly. Please if anyone has some helpful info, share it with me. I do not have a backup vga, and i cannot return it to the retailer now.
also all the test were done, with the vga at msi settings. However if i play unreal tournament 2004 with card overclocked it will freeze up during gameplay. However, I can play crysis, turok, cod4, ect with the same clock speeds on vga fine. Although, all of That is with the svideo disabled. If i enable it, all of them will crash eventually.

MSI Nvidia NX6200 black screen problem

Similar Messages

Maybe you are looking for