MSI VOX - MSIPVS (only cd); dropped frames in other programs;

I have dell inspirion 11000 (512mb, celeron 2,GHz) and msi vox USB TV tuner.
I have two problems.
In MSIPVS I can only select cd audio for audio output , but I have only mic in  input on my computer. I guess this problem is in connection with the sound card on my lap top. I would like to know, if anyone was in the similar situation and how he managed to get out of this problem.
Second problem is probably in connection with msi vox driver. I am able to get preview only from IUVCR and MSIVPS. I can capture sound and video only from IUVCR since this program allows me to select microphone for audio input. But during the capturing I have a lot of dropped frames (around 70% ... my CPU usage is very small, disc fragmented .... ). Other programs just don't work.
Please HELP ME! ;-)
Thank you in advance

Could be the memory, but it's hard to tell.
It may be a problem with reading the timecode from the camera.
Some things to try:
You could try to capture now and capture the entire tape with device control on.
Turn device control off and capture now (this will not allow you to recapture footage based on timecode)
If you are capturing to your internal drive where your operating system is running on and have journaling enabled, this could be fouling up the capture process. To see if you have journaling on go to:
Applications->Utilities->Disk Utilities
select the drive you are capturing to
click the select the File Menu and see if the journaling submenu says enable journaling or disable journaling. If it says disable, then the drive is journaled.
Capturing to a FileVault Volume will slow down the capture process and probably causes dropped frames.
Reboot the computer and hold the right shift key down to start in safe mode. If you have multiple users, hold the shift key down when logging into a user. Try to capture in safe mode. This will turn off any pesky programs you may have running in the background.
Make sure the drive you are capturing to has enough free space. If you are capturing to a drive that is close to full or heavily fragmented, it will slow the capture process down and drop frames.
Other than that... it could be a memory issue or it could be the speed of your hard drive.

Similar Messages

  • The problem I have since I upgraded to Mavericks version 10.9.1 The problem appears only with Mail not with other programs, not even with my browser. When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command   to e

    the problem I have since I upgraded to Mavericks version 10.9.1
    The problem appears only with Mail not with other programs, not even with my browser.
    When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
    As I have a problem with my eyes, This is a serious matter for me.
    When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
    Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but  he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.

    Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
    My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
    I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
    Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10".

  • Very frequently I am unable to click on anything within the brower, I need to alt-tab to another program or minimize firefox in order to click on any links. This is only within firefox and no other program or browser that I have having this problem.

    Very frequently I cannot click on any links within firefox. I have to either alt-tab or minimize the browser in order for me to navigate through website.
    This appears to be only issue with firefox and nothing else on my computer as I don't have this problem with any other program or web broswer.
    I needed to alt tab 5 times just to get this question submitted, very annoying!

    That problem can be caused by the Yahoo! Toolbar or the Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • In large PDF files my cursor moves around the page at warp speed. It does not seem to make any difference if I slow it down with Sys Prefs. This is not only in preview but also other programs to open PDFs.

    In large PDF files the cursor moves at warp speed with a mind of it's own, I've tried slowing it down in Sys Pref with no luck. On small files cursor action is normal. This happens in Safari, Preview and other programs that use PDF files. Sorry to say this does not seem to be a new problem with 7.# I've had it with prvevious versions of operating system Right now I'm using a Apple wireless mouse and key board. Using the USB keyboard and mouse the same problem does not go away.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • The @ and " are swapped around this only occurs in firefox all other programs it works fine, ive tried changing language but it doesnt help

    internet explorer word etc there isnt a problem

    Solved!
    I had the same problem, which only occurs in Firefox but not in any other program, even another Mozilla browser like SeaMonkey.
    In the Windows XP Control Panel mentioned above (Regional and Language Options > Languages > Text services and input languages > Details...) I have:
    * '''two''' keyboard layouts listed under ''Installed Services'', English UK and English US - in that order. The default is set to English UK
    * under '''Advanced''' tab, ''System Configuration'', I have ''Turn off advanced text services'' '''selected'''.
    I removed the English US keyboard layout which fixes this problem for me.

  • [Vox] MSI VOX with only audio in radio (AM), and no Audio in TV.

    Hi,  I am from Mexico City and my problem is a little diferent from the posted here. My issue is that I have a MSI VOXB0408009277 with a very good image quality with no sound in TV, but i have sound in radio, that by the way I can not stop because the MSI Radio application report an error that say: "MSIRADIO MFC Application has encountered a problem and need s to close."  I have installed the last updatesoftware and drivers from MSI site.
    I have MSIPVS3.0 in my Dell Inspiron 8500, Win XP- Service pack II.
     Any help will be really appreciate.
        Axarx.

    Open one of the "no sound" files in QuickTime Player.
    Open the Movie Info (Window menu) and note the audio codec used in the file.
    Do a Google search for "codec name" +Mac and find a version compatible with your OS and computer model.

  • Hello everyone, I have a new Eizo screen calibrated, when i hide the dock on the destop, i get a strong color shift to red, It gets back to normal after clicking in the finder. That only happens with photoshop no other program.

    I am working from a laptop, running 10.9.5 with Creative Cloud.
    CC14. I think all my setup are correct not sure hoe to correct this.
    Thank you.
    M

    …It looks like when I choose the automatic mode to show or hide for the dock the problem is solved…

  • Premiere Pro 1.5 - dropped frame issue

    First let me say I know this program is out dated so let's not get into that. (or maybe we will) The company I work for is small and just can't afford to upgrade. So, as I am stuck with this program there have been reoccuring issues with dropped frames.
    I use a PD-150 and/or DVX-100 to shoot. I used a mini-DV deck to capture to the system via firewire. I noticed that there were several random dropped frames throughout the show. (The show being a dance recital) The big hassle is that it is a two camera show and so everytime I think I have the cameras matched up, oh gee great, there's a nother dropped frame. I then recaptured the tapes from the camera that they were shot in. Same problem, only the dropped frames were in different areas. Does this mean that the tape is not damaged? That it did not occur during filming? Is it a problem with the capturing device? We have a Matrox system. I am also capturing to an external harddrive. Firewire. But this has happened when I've used the computer hard drives for project space. So, I'm not sure if that would make a diffrence.
    Basically, wtf can I do to stop dropped frames?
    Is it the video card? capturing system?
    Do we really just need to upgrade our software to solve the issue?
    If indeed there is a solution, would I have to recapture everything in order to get rid of the dropped frames?
    Help please! Thanks!
    Kip

    Recapture to a internal drive is your best option imo.

  • Dropped frames question

    Late 2007 MacPro/5G RAM/Editing to dedicated internal scratch disk/HDV sequence/AIFF Audio 48khz/FCP Version 6.0.4
    I don't know why I am having this problem, but whenever I try to play a sequence, it plays fine when it is playing through a rendered video track over music, but as soon as the playhead gets to audio-only portions of the sequence (meaning no video above the audio track) it starts dropping frames immediately. I have set the user preferences to "Audio Playback--Low (faster)" but this still seems to do nothing. I have played with the usual RT settings - nothing. Why would FCP be dropping frames just trying to play the audio alone? Audio settings match the sequence settings. What the heck? Love some help, thanks.

    that keeps the frames from dropping. This can't be considered a fix for this though, can it?
    Well it fixed it didn't it?
    In earlier versions of FCP I always had to do this to stop dropped frames. Other FCP editors tell me that with FCP 5 that it was no longer necessary. I still do it though.
    Glad to have helped

  • Abort Capture on Dropped Frames Feature is Not Saving Captured Media

    I have searched for this specific problem here without any results. I'm simply capturing regular SD DV and am getting dropped frames. Even though the dropped frames is an issue that I shouldn't be encountering, that's not the reason for this post. The bigger problem is that FCP 6 is not saving the file prior to the abort.
    The manual specifically states on page 308 Part IV " Abort capture on dropped frames: When this option is selected, capture stops immediately when a dropped frame is detected. All media captured before the dropped frame has frame-accurate timecode and is preserved. The resulting media file is saved and a clip for that media file is placed in the Browser."
    Well the issue is, FCP is NOT saving the file to my hard drive much less it's NOT placing the clip in my Browser. I can spend 50 minutes and get a dropped frame and it aborts capture (that's what I want it to do) but the time spent capturing that 50 minutes of media is simple gone. Poof, no file, no nothing. So what gives, anyone else seen this problem?
    I am up to date on all software.

    Hi Michael, thanks for the feedback.
    I have a MacPro 2.66 GHz dual-Core Intel Xeon with 5 GB of ram. Internal 250 GB system drive with an additional internal Seagate Barracuda 750 GB drive 7200 RPM SATA 3.0Gb/s drive Model number ST3750640AS which I have captured my previous project, and now am capturing only my 2nd project to.
    Note: I have only captured 2 projects to date on this new Mac. The first project consisted of around 5 tapes which I captured each one using the CAPTURE NOW feature without any problems (with the exception of the reset timecode which FCP handled as advertised and stated below). So far I've captured 10 tapes from my 2nd project. So I still have well over 500 GB free on that drive.
    I am capturing via firewire from a Sony DSR-11. I only use one brand of tape, the Panasonic AY-DVM63AMQ. My cameras are 2 Sony VX2000 and one VX2100. I know for a fact that I need to replace the internal battery in my oldest VX2000 because every time I turn it on, I get a warning that I need to set the clock, and everything else has reset itself to default settings. However, this is not the camera that I have been experiencing timecode reset with. It's my other (not as old) VX2000. I don't use my cams to capture to the computer, that's why I purchased the DSR-11. With this camera, it will reset timecode frequently with the camera still powered on, but stopped (not pause mode). The tape is not being previewed or anything causing it to play past the preexisting recorded media which wold in fact cause a timecode reset as you stated in your last message. So I don't know what is wrong with this camera, I'm fairly certain the internal battery is good because it keeps time on it's own. I'm hoping it just needs a good cleaning, but I'm afraid it may be something worse. I'm getting ready to send it off for a checkup this week.
    In any case, about 80% of the time, FCP has been able to properly detect timecode reset when it is encountered, and it does in fact pause recording, save the first file, and reposition itself to the new timecode and start recording a new file as advertised. The other 20% of the time it has simply paused the DSR playback, saved the file, and informed me that the tape has reached the end of the recorded media, which it hasn't but In these cases it's not detecting a timecode reset. I then have to press the stop button in my capture window to actually move the deck from pause to stop mode.
    Now, the dropped frame issue on capture is a separate issue. According the the FCP manual (as I stated in my first post) it is suppose to abort capture, but still salvage what has been captured thus far, and it is not doing this. Thus far over the course of these first 2 projects on my Mac, I have only encountered dropped frames on capture twice, and both times while capturing from this 2nd project. The first time this happen, I was doing a lot of stuff in the background, i.e. checking email, browsing some web site, but nothing that consisted of playing video or audio, and I was doing some iChat (simple chat, not screen sharing or video/audio conferencing or anything like that. So I attributed my drop frame to the fact I was doing too much in the background. I then decided that I would NOT be playing around in the background any more while capturing. So I was quite surprised when I received yet another dropped frame notification at around 50 minutes. It did about capture as advertised, but it did not salvage the media it had already captured.
    So... that's my story, and I'm sticking to it.
    Thanks for your time, I appreciate the help.

  • DVCPRO50 multicam playback: dropped frames

    I'm having trouble with multicam group playback (5 cameras) in FCP - Dropped-Frame Error. Individual clips playdown fine, only groups drop-frames.
    Stats:
    G5 Quad 2.5 - 4GB
    OS 10.4.3
    FCP 5.0.3
    G-RAID 1000GB
    source footage: DVCPRO50 @ full resolution
    Could it be the 5 cameras @ full-rez giving the G-RAID a hard time?

    I'd think so. DVCPRO 50 is 8-bit, and the G-Raid handles 3-4 streams of 8-bit, and you are asking it for 5 streams. For this I'd think you'd need a SATA Raid.
    Shane
    "There's no need to fear, UNDERDOG is also using G-Raids!"

  • MSI VOX software crashes

    Folks I have Vista Home Premium on my Laptop but the MSI VOX keep crashing when I try to click program or device. "InterVideo?WinDVR Application has stopped working".
    Any help?
    Dave

    This one?
    VOX USB TV Box: http://eu.msi.com/index.php?func=proddesc&maincat_no=132&prod_no=615
    Has it ever worked?
    Try running WinDVR (MSIPVS) in compatibility mode for Windows XP. Which driver did you install, as there are no Vista drivers for this device?

  • Dropped Frame Count

    I am using Premier Elements 11 on Dell XPS 500, 8GB memory, I7-3770 CPU 3.4GHz, Windows 7 Home Premium 64-bit. I have encountered one clip that reported dropped frames. Where can find how many frames were dropped?  I have transferred several hours of video with no reported dropped frames. I am using a SIIG Firewall card with ADVC55 connected to VCR to transfer some home videos to DVD. 

    When you use a DV bridge, you'll often get reports of dropped frames because the program is not receiving timecode information from the camcorder, as it would be if you were capturing DV footage.
    So you can ignore the message.
    But meantime, if you're going to capture through your bridge, open Preferences (under the Edit menu on a PC) and go to the Capture page. Make sure that all three boxes (related to timecode and dropped frames) aren unchecked.

  • Iphoto keeps dropping out. Sometimes other programs do too such as Software Update. They other programs seem to drop randomly but iPhoto drops out constantly. Is there a solution?

    iPhoto constantly keeps dropping out. Other programs do at times but iPhoto drops out constantly. Does anyone know what causes this?

    Apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Upgraded hard drive, now only Photoshop from CS5 works and other programs do not

    I recently changed out my hard drive for a bigger one during a computer upgrade.  I deactivated my CS5 through Photoshop, and then changed out the hardware.  I brought the programs back over and now only Photoshop works and the other programs of CS5 do not work.  Is the license unique for each one?  I assumed I only needed to deactivate one member of the CS5 family.  What can I do now that I have a new hard drive?

    If by "brought the programs back over" you mean you somehow transferred them from the old drive to the new one, transferring does not usually work.  Adobe programs need to be installed using installations files.  If you need to you can download those files thru the following page: http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

Maybe you are looking for