MSPS 2010 Issue and Risks Alerts

All,
We are using MSPS 2010 with June CU Update.
Is there a way to turn on "automatic Alerts" to the "Assigned To" person when an issue/risk is assigned to that person on a Project Site?
I know this was not possible in Project 2007, and the options were
users sets an alert by choosing "Alert Me" (this seems to be taken away in 2010)
Set a workflow for each Issues List/Risks List to send emails.
Is Option 1 available in MSPS 2010?
Thank you for your help.

Hello Prasanna,
Another option is from the Risk or Issue workspace page, under the "Actions", you can enable "Alert Me". Once there, you can specify what kind and how you want alerts to occur.
Cheers!
Micahael Wharton, MBA, PMP, MCT
Sincerely, Michael Wharton, MBA, PMP, MCT, MCSD, MCSE+I, MCDBA www.WhartonComputer.com

Similar Messages

Issues and Risks Page: How is this page's data displayed? PSI or Reporting Database?

The Issues and Risks page (issuesandrisks.aspx) serves up a list of issues/risks that are assigned to me. Is this a PSI call behind the scenes, or a call to the Reporting DB? Has anyone gone to this level of detail? Any help on how to
get this info programmatically would be awesome. Thanks! - M
Michael Mukalian | Jan 2010 - Dec 2010 MVP SharePoint Services | MCTS: MOSS 2007 Configuration | http://www.mukalian.com/blog

Issue and risk comes from reporting DB. Please go through link it may help you to understand
http://pwmather.wordpress.com/2012/07/13/projectserver-active-issues-and-risks-on-pwa-reminders-web-part-ps2010-sp2010-sharepoint/
kirtesh

Want to see ALL issues and risks, not just mine. Is this possible?

I'm relatively new to Project Online, but I have four projects in it with associated risks and issues. It looks like I can only see risks and issues that are assigned to me, which is fine for now, but as these projects get further down the line (or
as I add more projects), I'm going to want to assign issues and risks to other people and as head of our nascent PMO, I'm still going to want to see ALL of the issues and risks from Project Online (I am trying to manage the portfolio, after all). Is
there a setting somewhere I missed that would allow this, or am I stuck with just being able to see my own?

Hi Cuttyson--
If you do need to consolidate risks and issues among a portfolio then you'd fall into report's creation with odata technology.
Paul's (a fellow MVP) has posted a while ago a tremendous
report pack which can be applied to Project Online with specific reports for risks and issues.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Users unable to see Issues and Risk assigned to them in PWA 2013

User unable to see Issues and Risk assigned to them in PWA 2013 site

Hi,
I think this a duplicate of you other thread
Paul

Logic Board Mac Mid 2010 Issues and Questions.

Hi Everybody, this topic is somewhat old but I've been having Kernel Errors with my 2010 MacBook Pro, and they recently just started happening within the last 3-5 mos. Here lately they have been get worse. It will restart for no reason while I'm in the middle of anything. It will sometimes restart 4 times in a row. I figure it's the Logic Board. After looking around the community I noticed that I wasn't the only one with this issue. I also saw that at some point there was free replacement. I didn't know about this at the time because I wasn't having the issue. Is this still going on or is there some sort of discounted rate? I had apple care for 3 years but now it's gone of course and is wondering if there is anything I can do?
Here is a pictured of one of Kernel Errors I had from 2 mos ago.
Thank you for your help! any knowledge about this is appreciated!

Please don't post pics of logs. Better to post the log itself: Mac OS X- How to log a kernel panic.
OS X- About kernel panics
Visit The XLab FAQs and read the FAQ on resolving kernel panics.

Project Centre - Active Issues and Active Risk columns always show 0

Hello,
We have created a number of Project Centre views to which we have added the "Active Risks" and "Active Issues" columns against projects. No matter how many active issues or risks a project has, these columns are always showing 0 for each
and every project.
The reminders web-part on the PWA home page, and the Issues and Risks page (/PWA/IssuesAndRisks.aspx) correctly show these counts for a user, but Project Centre does not show the values correctly for projects.
We have not changed the values in the "Status" column of either list - they're still the default "(1) Active", "(2) Postponed" and "(3) Closed".
All issues and risks are correctly promoted to the reporting database on publish or when a list item is added/updated/deleted etc.
Our environment was upgraded from Project Server 2010 to Project Server 2013 and we're running service pack 1.
If not now, when?

Hello,
There fields don't actually work, if you want to see the active risks or active issues per projects in a summary row, create a report from the Reporting schema in the Project Web App database.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Develop a Integrated Report of Program and Project Risks, Issues and Opportunities from Project Sites

Does anyone know if it is possible to create an integrated report of all program / project risks, issues and opportunities as identified on project sites? We plan on having our project teams identify and manage these on their project sites but would like
to ability to roll this information up into a report for management review. Need to know if this is possible and how it might be done. Thanks.

Hi,
are you asking for a Reporting Services Report? You can find this information in Reporting DB (2010) resp. schema dbo for reporting (2013).
Here a simple query:
SELECT PROJ.ProjectName
, ISSUE.Title AS Issue
, RISK.Title AS Risk
FROM dbo.MSP_EpmProject_UserView AS PROJ
LEFT OUTER JOIN dbo.MSP_WssIssue_OlapView AS ISSUE ON PROJ.ProjectUID = Issue.ProjectUID
LEFT OUTER JOIN dbo.MSP_WssRisk_OlapView AS RISK ON RISK.ProjectUID = PROJ.ProjectUID
Or are you looking for something different?
Regards
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

Exchange 2003 to 2010 Migration and Certificate Issue

Good Day All -
This is my first post on here, so if I post to the wrong spot or something is incorrect, please forgive and redirect me.
I have a small working knowledge of Exchange and even less about Certificates.
I did an Exchange 2003 to Exchange 2010 migration last weekend, and, for the most part, everything went well. Initially when users first launched Outlook for the first time, (post mailbox move), the received a Security Alert to install the Self-Signed
Certificate for the new Exchange Server. This was a one time deal and everything was good after that. Also, I exported the non-self-signed certificate, (for external mail, purchased from Network Solutions), from the Exchange 2003 Server, and imported
it into the Exchange 2010 Server. Again, no issue.
Jump ahead to today. It was brought to my attention that some mobile devices were unable to connect, and in my infinite wisdom ,<sarcasm>, I thought the issue had to do with the certificate(s). I started troubleshooting and it seems like I've
fixed the the mobile devices being able to connect, but now every time users launch Outlook, they receive the Security Alert for the non-self-signed certificate, over and over again. (or it just pops up while connected to Outlook)
They go through the motions of installing it, but it just keeps coming back.
I have referenced several articles on here, and other sites, but nothing has worked and I'm stuck and fried on this one.
http://support.microsoft.com/kb/940726/en-us
http://exchangeserverpro.com/how-to-issue-a-san-certificate-to-exchange-server-2010-from-a-private-certificate-authority/
Would someone please help. Thanks very much, (in advance).

Thanks for the reply. Yeah, I have read many articles, (especially from exchangeserverpro), and have learned alot, but I am definitely a cert novice here.
The cert "error" on my internal Outlook Clients is a Security Alert for
mylocalservername.mydomain.lcl. When I click to view this certificate it points to
webmail.mydomain.com, which is what the external
devices use for SSL verificartion.
I'm not understanding why my internal Outlook clients are prompting for this external certificate.
I have the self signed certificate that auto-installed with Exchange 2010, which points to the DNS Names:
mylocalservername.mydomain.lcl and mylocalservername. This was the server certificate that the Outlook clients installed after they launched Outlook post mailbox migration to the new Exchange
2010 server and everything was good internally.
For my external connection then, I exported the webmail.mydomain.com
from the old Exchange 2003 server, and imported it on the new Exchange 2010 server; (EMC\Server Configuration\Import Exchange Certificate (Actions Pane)). Ever since doing this, all Outlook clients, (2007 & 2010)
receive the Security Alert for mylocalservername.mydomain.lcl, but is for the
webmail.mydomain.com cert.
I have two certs on the Exchange 2010 server; one self signed and one not, (The non-self-signed purchased from a CA and thus the one I imported from Exchange 2k3).
The services assigned to the two certs are:
Self-Signed, (mylocalservername.mylocaldomain.lcl and
myservername):
IMAP, POP, SMTP
Non-Self-Signed, (webmail.mydomain.com, Purchased from CA)
IIS
Please let me know if there's anything glaring here that I'm missing, and if not, what you think the problem may be. Thanks very much.

HT202008 I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers.

I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers. I installed boot camp5 but seem to be the wrong version and change to boot camp 4 which was updated okay. However I still cannot do the updates. Can someone advice me please? Thank you!

Please see Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for the appropriate version of drivers related to the specific version of Windows 7.
MacBook Pro
(13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
Be careful with Windows Updates, especially driver updates. Standard WHQL drivers can cause problems.

Issues,Documents and Risks in primavera

Can any one explain about Issues,Documents and Risks in Primavera.
what is the Exact use of those.
In which Scenario we have to use those.

Hi Soumya,
You can't add via View at Task Level this kind of information, only via Project Center, may you can build some custom WebPart.
Raymundo Chapa, MCTS http://www.inavant.mx/blog http://projectaserverzone.blogspot.com/

[VENDOR BUG] AND OFFICE 2010 issue Taskbar grouping Outlook 2010 and other applications grouping together.

i am currently using office 2010 and filesite 8.5 sp2 or sp3 and experiencing the same issue with the icon grouping in the taskbar in all the threads i have read the responses state that the solution was to upgrade to office 2010 well that might have been good
and well for most cases but it seems the issue is still relevant in regards to office 2010 pro plus. We were using office 2010 standard and it turned out that we had licenses for pro plus so we had to true up as per Microsoft and in doing so this
revealed an unknown issue we had not previously experienced.
To get to the point i'm using office 2010 and filesite in conjunction with one another and experiencing the same issue that has been discussed on multiple different threads and unfortunately attorneys do not like to hear answers that do not solve their problems.
specially in an environment where we have close to 1000 users this may potentially affect.
Has anyone experienced this and/or found a solution to it in the specific situation i am explaining. (use of filesite 8.5 Sp2 or Sp3 and office 2010 pro plus mainly outlook 2010 pro plus.)
Any help or direction is greatly appreciated.
-m

Hi,
When did this issue started? Was there any changes in your side? Like add-in version update? Or other updates?
Is it possible to disable all the other add-ins only keep filesite enabled, check if the Office is still“grouping
in the taskbar”? Then we could enable the add-ins one by one. Though this we could identify if there are add-ins conflicts.
Does this “grouping in the taskbar” issue only occur when we have filesite installed? If so, it would be better that you post this issue in filesite support channel to
get more insightful support.
Thank you for your understanding.

Mailbox Move Issues and Errors - Exchange 2010 to 2013

I'm trying to move mailboxes from 2010 to 2013, but I'm experiencing a lot of issues.
My move batches keep hanging (stalled) for minutes and hours on end, and I can't seem to keep them going consistently.
I have two DAG's, one for Archive boxes, and one for Primary mailboxes. Each DAG has three members with DB copies of each DB. The npdes and the clusters themselves are up and healthy. However, at random some of the DB's Content Index state will go to Failed
or SuspendedandFailed. At which point I force a catalog refresh and DB index update, and it goes to healthy.
I've created the "ContentSubmitters" AD group (and assigned it permissions), reset the Search and Host controller services on each server, and restarted the Replication service. I also deleted and recreated the Index for each DB prior to restarting
services. No dice. I've also already moved the system mailboxes over to the 2013 databases.
I'm also getting some "Transient" errors in the user move log, things like this:
Transient error ResourceUnhealthyException has occurred. The system will retry"
5/4/2014 8:43:55 AM [exmb1] The job encountered too many transient failures (60) and is quitting.
5/4/2014 8:43:55 AM [exmb1] Fatal error ResourceUnhealthyException has occurred.
Error: MigrationPermanentException: Warning: Target mailbox unlock operation was not replicated. If a lossy failover occurs after the target mailbox was unlocked, the target mailbox could remain inaccessible. Error details: The store ID provided isn‎'t an ID of an item. --> MapiExceptionNetworkError: Unable to open entry ID. ‎(hr=0x80040115, ec=0)‎ Diagnostic context: Lid: 45025 Lid: 45345 StoreEc: 0x80040115 Lid: 22894 Lid: 24942 StoreEc: 0x80040115
Any ideas would be appreciated!!!

Hi
I would suggest you to run the below command for this "My move batches keep hanging (stalled) for minutes and hours on end" issue and see the result
Get-MoveRequest -Identity "Mailbox Name" | Get-MoveRequestStatistics -IncludeReport | FL Report
Just check if the MRS health is fine by running the below command
Test-MRSHealth -Identity "CAS Server" -MonitoringContext $true | Export-CliXml "C:\temp\CAS_MRSHealth.xml" and look at the xml file to get more information
When I run the Test command against either of my CAS servers, I get: " 'EXCH1' does not have the right Exchange Server version or role required to support this operation."
Run i run that command against any of the mailbox servers, it completes and generates the XML file, but I'm not sure what I need to be looking for within that file.
The first command spits out a ton of data, here's a little excerpt:
5/5/2014 8:59:28 AM [exmb1] Transient error ResourceUnhealthyException has occurred. The system will retry
(2/60).
5/5/2014 9:00:02 AM [exmb1] The Microsoft Exchange Mailbox Replication service 'exmb1.contoso.com'
(15.0.847.31 caps:03FF) is examining the request.
5/5/2014 9:00:07 AM [exmb1] Connected to target mailbox 'Primary (072dc240-bd79-495c-b7f2-c571e8f910f2)',
database 'newmbi', Mailbox server 'Exmb1.contoso.com' Version 15.0 (Build 847.0).
5/5/2014 9:00:07 AM [exmb1] Connected to target mailbox 'Archive (812ee554-4a1e-4feb-b591-a435fcbdee16)',
database 'newarci', Mailbox server 'EXARC2.contoso.com' Version 15.0 (Build 847.0), proxy server
'EXARC2.contoso.com' 15.0.847.31 caps:1FFFCB07FFFF.
5/5/2014 9:00:07 AM [exmb1] Connected to source mailbox 'Primary (072dc240-bd79-495c-b7f2-c571e8f910f2)',
database 'exmbi', Mailbox server 'Chsexmb2.contoso.com' Version 14.3 (Build 181.0).
5/5/2014 9:00:08 AM [exmb1] Connected to source mailbox 'Archive (812ee554-4a1e-4feb-b591-a435fcbdee16)',
database 'Exarci', Mailbox server 'CHSEXARC1.contoso.com' Version 14.3 (Build 181.0)
5/5/2014 9:00:12 AM [exmb1] Request processing continued, stage LoadingMessages.
5/5/2014 9:00:36 AM [exmb1] Messages have been enumerated successfully. 6657 items loaded. Total size:
332.3 MB (348,411,982 bytes).5/5/2014 9:06:14 AM [exmb1] The long-running job has been temporarily postponed. It will be picked up
again when resources become available.

I have Mac Pro 2010 model and it's giving heavy fan noise,so run the Apple hardware test but it's showing the Error: 4SMC 1 40000000 please help me in this issue.

I have Mac Pro 2010 model and it's giving heavy fan noise,so run the Apple hardware test but it's showing the Error: 4SMC 1 40000000 please help me in this issue.

Same error information here.
https://discussions.apple.com/message/13083664?messageID=13083664

Replication issue between lync 2010 FE and lync 2013 FE

Hello
I face any issue in my lync server's .
I was in the last steps in the migration process from lync 2010 to 2013 enterprise edition .
where CMS was moved already to 2013 , and later on many time I checked the replication and it was fine , then I deleted the CMS DB FROM 2010 FE and I checked the replication and it was fine .
later on I proceed to delete the archiving server and monitoring server and it was fine .
later on I proceed to
Reset call admission control
Prevent sessions for services
Stop Lync Server 2010 services
Remove a Front End Server from a pool
I just I face this replication issue after I start the process to delete the lync 2010 pool which im stuck on it now .
one more thing while I was trying to delete the 2010 front end pool , I got the error .
Error: An error occurred: "System.InvalidOperationException" "Cannot publish topology changes. Conference directories still exist on a pool that would be deleted. Remove the conference directories before continuing."
so I moved the conference directories from 2010 pool to the 2013 pool successfully.
but later on when I check the replication I notice the replication issue ?
Get-CsManagementStoreReplicationStatus
UpToDate           : False         """""""""""""""""""it is already shutdown
ReplicaFqdn        : HQ-EDGE01.mydom
LastStatusReport   :
LastUpdateCreation : 3/23/2015 11:22:17 AM
ProductVersion     :
UpToDate           : True
ReplicaFqdn        : HQ-LYNC2013-FE.mydom
LastStatusReport   : 3/19/2015 5:21:27 PM
LastUpdateCreation : 3/19/2015 5:21:25 PM
ProductVersion     : 5.0.8308.556
UpToDate           : False
ReplicaFqdn        : HQ-LYNC-FE-01.mydom
LastStatusReport   : 3/19/2015 11:38:25 AM
LastUpdateCreation : 3/23/2015 11:52:17 AM
ProductVersion     : 4.0.7577.0
then I run the
I run Invoke-CsManagementStoreReplication
Get-CsManagementStoreReplicationStatus
UpToDate           : False     """""""""""""""""""it is already shutdown """"""""""""""""""
ReplicaFqdn        : HQ-EDGE01.mydomain
LastStatusReport   :
LastUpdateCreation : 3/23/2015 10:18:22 PM
ProductVersion     :
UpToDate           : True
ReplicaFqdn        : HQ-LYNC2013-FE.mydomain
LastStatusReport   : 3/23/2015 10:18:26 PM
LastUpdateCreation : 3/23/2015 10:18:22 PM
ProductVersion     : 5.0.8308.556
UpToDate           : False
ReplicaFqdn        : HQ-LYNC-FE-01.mydomain
LastStatusReport   : 3/19/2015 11:38:25 AM
LastUpdateCreation : 3/23/2015 10:18:22 PM
ProductVersion     : 4.0.7577.0
====================
Get-CsManagementStoreReplicationStatus
UpToDate           : False """"""""""""""" it is already down """""""""""""""""""""
ReplicaFqdn        : HQ-EDGE01.mydomain
LastStatusReport   :
LastUpdateCreation : 3/23/2015 10:53:23 PM
ProductVersion     :
UpToDate           : True
ReplicaFqdn        : HQ-LYNC2013-FE.mydomain
LastStatusReport   : 3/23/2015 10:18:26 PM
LastUpdateCreation : 3/23/2015 10:18:22 PM
ProductVersion     : 5.0.8308.556
UpToDate           : False
ReplicaFqdn        : HQ-LYNC-FE-01.mydomain
LastStatusReport   : 3/19/2015 11:38:25 AM
LastUpdateCreation : 3/23/2015 10:53:23 PM
ProductVersion     : 4.0.7577.0
why LastUpdateCreation : 3/23/2015 10:53:23 PM from the lync 2010 pool ????
I'm not doing any change on 2010 pool now (I just try to delete it ) , all the change it is on 2013 pool .
for edge server 2013 I shut down the server since there is another configuration issue there (so replication to edge server not the issue now since it is down).
my question is this will affect my lync 2013 since it is the production now ? is this un completed steps for removing the 2010 pool affect my production.
is the replication issue affects my 2013 pool ?
Kind Regards
MK

Hi,
From your description above, did you mean before deleting the Lync Server 2010 Pool from topology, you found the replication of Lync 2010 FE Server not update to date?
If it is the case, based on my knowledge, there is no affect for Lync Server 2013 Pool. Please double check if Lync Server 2013 Pool work normally, and Lync users in Lync 2013 Pool can use all Lync function without issues. Then you can delete Lync 2010 Pool
from Topology and publish it. After finish it, please re-run step 2 on Lync Server 2013 FE Servers.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently. I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently. I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

For each mail account, along with designating a primary SMTP server, you should be able to just turn off any and all other SMTP servers you have listed. In that case, if there is a problem with comcast, the message send should just fail.
Also make sure your comcast smtp settings are correct (port, likely 587 but might be something else for comcast, whether you should be suing SSL or not, do you need authentication or not).
You might find the comcast forums useful for getting the settings right - I found this:
http://forums.comcast.com/t5/E-Mail-and-Xfinity-Connect-Help/iphone-email/m-p/66 1151?view=by_date_ascending#M131151
The second poster notes, SSL should be on, authentication should be "password" and you should be using port 995

MSPS 2010 Issue and Risks Alerts

Similar Messages

Maybe you are looking for