Mssql2012 - traversing hierarchy not working as expected. please advise.

Techies--
When I try to look for descendent organizations, I am seeing the level I am descending from and the descendents (screen shot).  I did not expect to see the row hightlighted.
When I try to find the ancestor on level 1 for OrgId 3, I don't receive any rows. I expected to see only the highlighted row. I have either generated the data incorrectly, or I am thinking about hierarchies in a wrong way.
Here is the sql for the queries
-- query#1 (descendents)
declare @OrgIdofInterest hierarchyid
select @OrgIdofInterest = OrgNode
from [stakeholder].OrganizationInheritance
where OrgId =2;
SELECT
orgtree.OrgNode.ToString() AS Text_OrgNode,
orgtree.OrgNode,
orgtree.OrgLevel,
orgtree.OrgId
FROM stakeholder.OrganizationInheritance orgtree
where OrgNode.IsDescendantOf(@OrgIdofInterest) = 1
-- query #2 (ancestor[s])
declare @NewOrgIdofInterest hierarchyid
select @NewOrgIdofInterest = OrgNode
from [stakeholder].OrganizationInheritance
where OrgId = 3;
SELECT
orgtree.OrgNode.ToString() AS Text_OrgNode,
orgtree.OrgNode,
orgtree.OrgLevel,
orgtree.OrgId
FROM stakeholder.OrganizationInheritance orgtree
where OrgNode.GetAncestor(1) = @NewOrgIdofInterest
Here is the build SQL for the tables and stored proc.
use [scratchdb]
go
ALTER TABLE stakeholder.OrganizationInheritance
DROP CONSTRAINT FK_OrganizationInheritance_OrganizationType
GO
ALTER TABLE stakeholder.OrganizationInheritance
DROP CONSTRAINT FK_OrganizationInheritance_Organization
GO
ALTER TABLE stakeholder.Organization
DROP CONSTRAINT FK_Organization_OrganizationType
GO
ALTER TABLE stakeholder.OrganizationInheritance
DROP CONSTRAINT UQ__Organiza__420C9E6DA211482A
GO
ALTER TABLE stakeholder.OrganizationInheritance
DROP CONSTRAINT PK_OrganizationInheritance
GO
ALTER TABLE stakeholder.Organization
DROP CONSTRAINT PK_Organization
GO
DROP INDEX stakeholder.OrganizationInheritance.OrganizationNode
GO
DROP TABLE stakeholder.OrganizationInheritance
GO
DROP TABLE stakeholder.Organization
GO
CREATE TABLE stakeholder.Organization (
OrgId int IDENTITY NOT NULL,
LegacyOrgCode nvarchar(50) NULL,
CustomIdentifier nvarchar(50) NULL,
OrgTypeId int NULL,
OrgShortName nvarchar(50) NULL,
OrgName nvarchar(200) NULL,
OrgURL nvarchar(300) NULL,
associationYears smallint NULL
GO
CREATE TABLE stakeholder.OrganizationInheritance (
OrgNode hierarchyid NOT NULL,
OrgLevel smallint NULL,
OrgId int NOT NULL,
OrgName varchar(200) NOT NULL,
OrgTypeId int NOT NULL
GO
SET IDENTITY_INSERT stakeholder.Organization ON
GO
INSERT INTO stakeholder.Organization(OrgId, LegacyOrgCode, CustomIdentifier, OrgTypeId, OrgShortName, OrgName, OrgURL, associationYears)
VALUES(-1, N'-1', N'', 1, N'All Fleets', N'ALL FLEETS', NULL, NULL)
GO
INSERT INTO stakeholder.Organization(OrgId, LegacyOrgCode, CustomIdentifier, OrgTypeId, OrgShortName, OrgName, OrgURL, associationYears)
VALUES(1, N'506', NULL, 1, N'S', N'S-0', NULL, NULL)
GO
INSERT INTO stakeholder.Organization(OrgId, LegacyOrgCode, CustomIdentifier, OrgTypeId, OrgShortName, OrgName, OrgURL, associationYears)
VALUES(2, N'626', NULL, 1, N'JJ Inc.', N'JJ-0', NULL, NULL)
GO
INSERT INTO stakeholder.Organization(OrgId, LegacyOrgCode, CustomIdentifier, OrgTypeId, OrgShortName, OrgName, OrgURL, associationYears)
VALUES(3, N'69066', NULL, 1, N'JJ-Northeast', N'JJ-1-A', NULL, NULL)
GO
INSERT INTO stakeholder.Organization(OrgId, LegacyOrgCode, CustomIdentifier, OrgTypeId, OrgShortName, OrgName, OrgURL, associationYears)
VALUES(4, N'70809', NULL, 1, N'JJ-Southeast', N'JJ-1-B', NULL, NULL)
GO
SET IDENTITY_INSERT stakeholder.Organization OFF
GO
CREATE PROCEDURE [stakeholder].[AddOrganizationInheritance]
@topOrgId int,
@Orgid int,
@OrgName varchar(100),
@OrgTypeId int
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @mOrgNode hierarchyid, @lc hierarchyid
SELECT @mOrgNode = OrgNode
FROM UnifiedStakeholder.stakeholder.OrganizationInheritance
WHERE OrgId = @topOrgId
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE
BEGIN TRANSACTION
SELECT @lc = max(OrgNode)
FROM UnifiedStakeholder.stakeholder.OrganizationInheritance
WHERE OrgNode.GetAncestor(1) =@mOrgNode ;
INSERT UnifiedStakeholder.stakeholder.OrganizationInheritance
(OrgNode, OrgId, OrgName, OrgTypeId)
VALUES(@mOrgNode.GetDescendant(@lc, NULL), @OrgId, @OrgName, @OrgTypeId)
COMMIT
END
GO
insert UnifiedStakeholder.stakeholder.OrganizationInheritance
(OrgNode, OrgId,OrgName,OrgTypeId)
values (hierarchyid::GetRoot(),-1,'ALL FLEETS',1)
GO
insert UnifiedStakeholder.stakeholder.OrganizationInheritance
(OrgNode, OrgId,OrgName,OrgTypeId)
values (@Fleet.GetDescendant(NULL,NULL),1,'S',1)
GO
-- // Note: I could have this wrong. I think I'm putting in the level above the level I want as @topOrgId.
exec unifiedstakeholder.stakeholder.AddOrganizationInheritance -1,2,'JJ Inc.',1
GO
exec unifiedstakeholder.stakeholder.AddOrganizationInheritance 2,3,'JJ-Northeast',1
GO
exec unifiedstakeholder.stakeholder.AddOrganizationInheritance 2,4,'JJ-Southeast',1
GO
CREATE UNIQUE INDEX OrganizationNode
ON stakeholder.OrganizationInheritance(OrgNode, OrgLevel)
WITH FILLFACTOR = 95
GO
ALTER TABLE stakeholder.Organization
ADD CONSTRAINT PK_Organization
PRIMARY KEY (OrgId)
GO
ALTER TABLE stakeholder.OrganizationInheritance
ADD CONSTRAINT PK_OrganizationInheritance
PRIMARY KEY (OrgNode)
GO
ALTER TABLE stakeholder.OrganizationInheritance
ADD CONSTRAINT UQ__Organiza__420C9E6DA211482A
UNIQUE (OrgId)
GO
ALTER TABLE stakeholder.Organization
ADD CONSTRAINT FK_Organization_OrganizationType
FOREIGN KEY(OrgTypeId)
REFERENCES reference.OrganizationType(OrgTypeId)
ON DELETE NO ACTION
ON UPDATE NO ACTION
GO
ALTER TABLE stakeholder.OrganizationInheritance
ADD CONSTRAINT FK_OrganizationInheritance_OrganizationType
FOREIGN KEY(OrgTypeId)
REFERENCES reference.OrganizationType(OrgTypeId)
ON DELETE NO ACTION
ON UPDATE NO ACTION
GO
ALTER TABLE stakeholder.OrganizationInheritance
ADD CONSTRAINT FK_OrganizationInheritance_Organization
FOREIGN KEY(OrgId)
REFERENCES stakeholder.Organization(OrgId)
ON DELETE NO ACTION
ON UPDATE NO ACTION
GO

IsDescendantOf
Returns true for all the nodes in the sub-tree rooted at parent, and false for all other nodes.
Parent is considered its own descendant.
GetAncestor
Returns a hierarchyid representing the
nth ancestor of this.
ordid=3 is the ancestor of nobody.

Similar Messages

  • My iPhone5s dropped in pool, for 15 min it is not working at all please advise what to do even it is new since two months only ???

    My iPhone5s dropped in pool, for 15 min it is not working at all please advise what to do even it is new since two months only ???

    Get US $269, then make an appointment at any Apple store, do an out of warranty exchange.
    iPhones seldom, if ever, fully recover from water exposure like that.

  • Webi report on OLAP Bex query -  Cost element Hierarchy not working Drill down

    Hello,
    We have a BO report on Bex query, Not on universe, we have a Hierarchy for Cost Element Group, and we are expecting the Drill down functionality for that in BO report, but it does not.
    Webi report on OLAP Bex query -  Cost element Hierarchy not working Drill down
    Any pointers how to do it please
    Thanks
    Krishna

    Hi,
    WebI reports on BEx source don't use same Drill feature as other sources, it's replaced by expland/collapse of hierarchy nodes (documented in WebI user guide in § "24.1 Drill defined"). This means you have to create query which selects all hierarchy sub-tree you plan on exploring later in report, otherwise if no data is available under a node there will be no '+/-' sign to visit this part of tree.
    You could try first to select "All members" from hierarchy in QueryPanel and see if behavior in report suits your needs. Then you should restrict hierarchy member selection to what's really needed to avoid performance issues.
    Regards,
    Loic

  • Silverlight 5 binding on a property with logic in its setter does not work as expected when debug is attached

    My problem is pretty easy to reproduce.
    I created a project from scratch with a view model.
    As you can see in the setter of "Age" property I have a simple logic.
        public class MainViewModel : INotifyPropertyChanged
                public event PropertyChangedEventHandler PropertyChanged;
                private int age;
                public int Age
                    get
                        return age;
                    set
                        /*Age has to be over 18* - a simple condition in the setter*/
                        age = value;
                        if(age <= 18)
                            age = 18;
                        OnPropertyChanged("Age");
                public MainViewModel(int age)
                    this.Age = age;
                private void OnPropertyChanged(string propertyName)
                    if (this.PropertyChanged != null)
                        PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
    In the MainPage.xaml 
         <Grid x:Name="LayoutRoot" Background="White">
                <TextBox 
                    Text="{Binding Path=Age, Mode=TwoWay}" 
                    HorizontalAlignment="Left"
                    Width="100"
                    Height="25"/>
                <TextBlock
                    Text="{Binding Path=Age, Mode=OneWay}"
                    HorizontalAlignment="Right"
                    Width="100"
                    Height="25"/>
            </Grid>
    And MainPage.xaml.cs I simply instantiate the view model and set it as a DataContext.
        public partial class MainPage : UserControl
            private MainViewModel mvm;
            public MainPage()
                InitializeComponent();
                mvm = new MainViewModel(20);
                this.DataContext = mvm;
    I expect that this code will limit set the Age to 18 if the value entered in the TextBox is lower than 18.
    Scenario: Insert into TextBox the value "5" and press tab (for the binding the take effect, TextBox needs to lose the focus)
    Case 1: Debugger is attached =>
    TextBox value will be "5" and TextBlock value will be "18" as expected. - WRONG
    Case 2: Debugger is NOT attached => 
    TextBox value will be "18" and TextBlock value will be "18" - CORRECT
    It seems that when debugger is attached the binding does not work as expected on the object that triggered the update of the property value. This happens only if the property to which we are binding has some logic into the setter or getter.
    Has something changed in SL5 and logic in setters is not allowed anymore?
    Configuration:
    VisualStudio 2010 SP1
    SL 5 Tools 5.1.30214.0
    SL5 sdk 5.0.61118.0
    IE 10
    Thanks!                                       

    Inputting the value and changing it straight away is relatively rare.
    Very few people are now using Silverlight because it's kind of deprecated...
    This is why nobody has reported this.
    I certainly never noticed this problem and I have a number of live Silverlight systems out there.
    Some of which are huge.
    If you want a "fix":
    private void OnPropertyChanged(string propertyName)
    if (this.PropertyChanged != null)
    //PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
    Storyboard sb = new Storyboard();
    sb.Duration = new Duration(new TimeSpan(0, 0, 0, 0, 100));
    sb.Completed += delegate
    PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
    sb.Begin();
    The fact this works is interesting because (I think ) it means the textbox can't be updated at the point the propertychanged is raised.
    Please don't forget to upvote posts which you like and mark those which answer your question.
    My latest Technet article - Dynamic XAML

  • Subtraction of two key figures normalized to result not working as expected

    Hello SAP Community!
    I am having problems with getting the right result from a subtraction of two KFs which are "normalized to results" which means the KFs really have values expressed as percentages. The substraction that should be performed is of two percentages (e.g.: 87.298% - 85.527% = 1.77%) but my report prints out the result as "number of units" instead (e.g.: 87.298% - 85.527% = 71,514.00 EA). The two normalized KFs actually "point" to two stock KFs, hence the "number of units".
    In order to explain the problem I am facing please analyze below text:
    1) Let's assume I have below data:
    LOAD MONTH  PLANT    MATERIAL HORIZON MONTH     FORECAST UNITS
    200805         PLANT-A  MAT-1            200805         510,235.00
    200805         PLANT-B  MAT-1           200805          74,240.00
    200805         PLANT-A  MAT-1           200806         438,721.00
    200805         PLANT-B  MAT-1           200806          74,240.00
    200805         PLANT-A  MAT-1           200807         356,981.00
    200805         PLANT-B  MAT-1           200807          74,240.00
    200806         PLANT-A  MAT-1           200805               0.00
    200806         PLANT-B  MAT-1           200805               0.00
    200806         PLANT-A  MAT-1           200806         510,235.00
    200806         PLANT-B  MAT-1           200806          74,240.00
    200806         PLANT-A  MAT-1           200807         438,721.00
    200806         PLANT-B  MAT-1           200807          74,240.00
    2) Then, assume I have a comparison report, restricted by load month for two months May and June 2008 (filter restricted by two month variables) with FORECAST units spread accross columns for whole horizon (two months also in this case).
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Comparison Units (June 2008) 510,235.00  438,721.00
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Comparison Units (June 2008)  74,240.00   74,240.00
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    3) Now, let's suppose we want to know the proportions (%) of Base vs Comparison units, so
    we normalize forecats to results an we get the below report:
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Base Units % (May 2008)      85.527%     85.527%
                       Comparison Units (June 2008) 510,235.00  438,721.00
                       Comparison Units %(Jun 2008) 87.298%     82.784%
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Base Units % (May 2008)       14.473%     15.702%
                       Comparison Units (June 2008)  74,240.00   74,240.00
                       Comparison Units %(Jun 2008)  12.702%     17.216%
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    4) Finally, let's suppose we want to know the deltas (differences) of Base vs Comparison
    units, for both number of units and %. The report now look as below:
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Base Units % (May 2008)      85.527%     85.527%
                       Comparison Units (June 2008) 510,235.00  438,721.00
                       Comparison Units %(Jun 2008) 87.298%     82.784%
                       Delta base vs. comp. units %  1.77%       2.74%
                       Delta base vs. comp. units    71,514.00  81,740.00
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Base Units % (May 2008)       14.473%     15.702%
                       Comparison Units (June 2008)  74,240.00   74,240.00
                       Comparison Units %(Jun 2008)  12.702%     17.216%
                       Delta base vs. comp. units %  -1.77%      -2.74%
                       Delta base vs. comp. units         0.00        0.00
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    5) PROBLEM:
    In my report, the "Delta base vs. comp. units %" is not working as expected and
    calculates number of units just as "Delta base vs. comp. units" does instead of calculating the % difference.
    So my report looks as follows:
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Base Units % (May 2008)      85.527%     85.527%
                       Comparison Units (June 2008) 510,235.00  438,721.00
                       Comparison Units %(Jun 2008) 87.298%     82.784%
                       Delta base vs. comp. units %  71,514.00  81,740.00 <<<WRONG!!
                       Delta base vs. comp. units    71,514.00  81,740.00
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Base Units % (May 2008)       14.473%     15.702%
                       Comparison Units (June 2008)  74,240.00   74,240.00
                       Comparison Units %(Jun 2008)  12.702%     17.216%
                       Delta base vs. comp. units %       0.00        0.00
                       Delta base vs. comp. units         0.00        0.00
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    The formulas are:
    a) Delta base vs. comp. units %
      Delta base vs. comp. units % = Comparison Units % - Base Units %
    b) Delta base vs. comp. units
      Delta base vs. comp. units = Comparison Units - Base Units
    The KFs
    - Comparison Units %
    - Base Units %
    Are RESTRICTED key figures (restricted to Base and comparison month variables) which
    are setup as:
    1) Calculate Result As:  Summation of Rounded Values
    2) Calculate Single Value as: Normalization of result
    3) Calculate Along the Rows
    The KFs
    - Delta base vs. comp. units %
    - Delta base vs. comp. units
    are FORMULAS setup to:
    1) Calculate Result As:  Nothing defined
    2) Calculate Single Value as: Nothing defined
    3) Calculate Along the Rows: user default direction (grayed out)
    Thanks for the time taken to read in detail all of this. Long text but necessary to understand what the problem is.
    Any help is highly appreciated.
    Thank you.
    Mario

    Hi,
    The subraction will be carried out before doing the normalization of your KF's. So, it is displaying "number of units". Create a calculated keyfigure and subtract the KF's and in the properties of this calculated keyfigure, change the enhancement as "After Aggregation".
    I hope this will solve your issue.
    Regards,
    S P.

  • Events in SubVi not working as expected

    Hi, I am reposting this question as my previous one didn't resulted in any satisfactory conclusion.
    I have attached my Vi's which are not working as expected. If I remove ONE subVi and its associated 3 controls and two indicators, the other one works just fine, but when I add two SUB Vis, it goes messy. I am trying to learn this way, I am sure it can be done many other ways, but please help me finding out the problem doing it this way as in my final MainVi, I would like to use 8 such sub Vis. Thanks.
    Solved!
    Go to Solution.
    Attachments:
    Main.vi ‏11 KB
    SubVi.vi ‏12 KB
    SubVi_2.vi ‏15 KB

    Your main problem is DATA FLOW.  A loop cannot iterate until EVERYTHING in it has completed.  So, as you have it, you have to have both event structures execture before you can go back to look for the next event.  So if you insist on having these subVIs, they need to be in seperate loops.
    BTW, you can get away with a single subVI.  Go into the VI properties and make it reentrant (preallocated clone).  Then each call of your subVI will have its own memory space.  A lot easier to maintain that way.
    And I know you said you didn't want alternatives, but here's how you can do it all with a single event structure in your main loop.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Main_MODTR.vi ‏10 KB

  • DB Adapter polling as singleton process is not working as expected

    Am using poller DB adapater to control the transaction per seconds to the downstream system and i want this poller process as singleton (One instance should be in running state at a time).
    As suggested in oracle documents , below is the parameters configured in composite.xml file.
    <service name="polling_Mange_Alert_Events"
      ui:wsdlLocation="polling_Mange_Alert_Events.wsdl">
    <interface.wsdl interface="http://xmlns.oracle.com/pcbpel/adapter/db/Application1/int_app_manageAlerts/polling_Mange_Alert_Events#wsdl.interface(polling_Mange_Alert_Events_ptt)"/>
      <binding.jca config="polling_Mange_Alert_Events_db.jca">
      <property name="singleton">true</property>
      </binding.jca>
      <property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
      <property name="jca.retry.interval" type="xs:int" many="false"
      override="may">1</property>
      <property name="jca.retry.backoff" type="xs:int" many="false"
      override="may">2</property>
      <property name="jca.retry.maxInterval" type="xs:string" many="false"
      override="may">120</property>
      </service>
    Below is the JCA file parameters configured :
    <adapter-config name="polling_Mange_Alert_Events" adapter="Database Adapter" wsdlLocation="polling_Mange_Alert_Events.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
      <connection-factory location="eis/DB/vff-int-fus" UIConnectionName="PT_APPINFRA" adapterRef=""/>
      <endpoint-activation portType="polling_Mange_Alert_Events_ptt" operation="receive">
        <activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
          <property name="DescriptorName" value="polling_Mange_Alert_Events.ManageAlertEvents"/>
          <property name="QueryName" value="polling_Mange_Alert_EventsSelect"/>
          <property name="MappingsMetaDataURL" value="polling_Mange_Alert_Events-or-mappings.xml"/>
          <property name="PollingStrategy" value="LogicalDeletePollingStrategy"/>
          <property name="MarkReadColumn" value="TRANSACTION_STATUS"/>
          <property name="MarkReadValue" value="Processing"/>
          <property name="PollingInterval" value="10"/>
          <property name="MaxRaiseSize" value="5"/>
          <property name="MaxTransactionSize" value="5"/>
          <property name="NumberOfThreads" value="1"/>
          <property name="ReturnSingleResultSet" value="false"/>
          <property name="MarkUnreadValue" value="Pending"/>
        </activation-spec>
      </endpoint-activation>
    </adapter-config>
    This poller process is running on clustered environment (2 soa nodes) and it is not working as expected as singleton process.
    Please advise to solve this issue ?

    Hi,
    1.Set Singleton property outside   <binding.jca> like this:
    <binding.jca config="polling_Mange_Alert_Events_db.jca"/>
      <property name="singleton">true</property>
      <property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
      <property name="jca.retry.interval" type="xs:int" many="false"
    2.Also you can try setting these values in jca file:
    <property name="RowsPerPollingInterval" value="100"/>
    <property name="MaxTransactionSize" value="100"/>
    3. try to increase the polling interval time.
    Regards,
    Anshul

  • TCP Window sizing not working as expected for Windows server 2008 R2 SP1

    Hi ,
    TCP window size is not working as expected. It is varying . Aplied the hotfix suggested by Microsoft and set the multipliccation factor as 1.The window size is not getting auto tuned based on the client machine. The data transfer rate is getting degraded.
    Please help.
    Thanks,
    Pro1962

    Hi,
    I think window auto-tuning is enabled.
    You can disable it by running the following commend.
    netsh interface tcp set global autotuninglevel=disabled
    Hope this helps.

  • Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)

    Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
    what cAN i do to make it work?please help

    Hi:
    If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

  • When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.

    When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.

    Did you select View->Bcc Address Field from the menu bar?

  • Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help.

    Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.

    cor-el,
    I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
    Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
    Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
    Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

  • TS3297 I want to buy the double coins from the game subway surfers! But they told me to contact the itunes support! I don't know why it's not working.. Please help! iPhone 4ss

    I want to buy the double coins from the game subway surfers! But they told me to contact the itunes support! I don't know why it's not working.. Please help! iPhone 4ss

    These are user-to-user forums, you are not talking to Apple here. You can contact iTunes support via this page and ask them why the message is appearing : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then probably Purchases, Billing & Redemption

  • I cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please

    i cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please..
    i updated my ipad in ios 6

    Turn off VoiceOver
    1. Press the Home button
    2. Tap Settings.
    3. Then double-tap Settings.
    4. Tap General.
    5. Then double-tap General.
    6. Use three fingers on the screen to scroll to Accessibility
    7. Tap Accessibility.
    8. Then double-tap Accessibility
    9. Tap VoiceOver
    10. Then double-tap VoiceOver.
    11. Tap "On" next to VoiceOver
    12. Then double-tap "On" to turn it off.

  • I recently downloaded iMovie on my iPhone 5 and it is telling me to connect to wifi or use itunes to download iMovie well I have done both and it is still not working can someone please help me?

    I recently downloaded iMovie on my iPhone 5 and it is telling me to connect to wifi or use itunes to download iMovie well I have done both and it is still not working can someone please help me?

    Hi troy157,
    I'm sorry you are having issues with the iMovie app you purchased for your iPhone5.
    The first thing I would suggest is to log out of your iTunes Account on your iPhone, turn the iPhone off and then on again, and see if app finishes downloading/updating.
    Settings > iTunes & App Stores > Tap on your Apple ID account > Tap Sign Out
    If the issues persists, the article below will give you a few more troubleshooting steps:
    iOS: Troubleshooting applications purchased from the App Store
    Try the following steps to resolve your issue, testing the app after each step.
    1. Update your device software
    Update your device to the latest version of iOS.
    2. Check for app updates
    Ensure that your apps are up to date:
    Open the App Store and tap Updates. If updates are available, tap Update All.
    When prompted, enter your iTunes Store account information. App Store will then download and install the application updates.
    Note: Some applications may require a Wi-Fi connection to update.3. Install another app from the App Store
    4. Restart the application
    If the issue affects only a single app, try closing just that app:
    Press the Home button to return to the Home screen.
    Double-tap the Home button to display recent apps.
    Tap and hold the affected app until the red minus appears.
    Tap the red minus to quit the app.
    Press the Home button, then restart the app.
    5. Restart your device
    Hold the Sleep/Wake button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.6. Reinstall the affected application
    Remove the application from your device and reinstall it.
    Touch and hold any application icon on the Home Screen until the icons start to wiggle.
    Tap the "x" in the corner of the application you want to delete.
    Tap Delete to remove the application and all of its data from your device.
    Press the Home button.
    Go to the App Store.
    Search for the application and then download it again.
    Note: If it is a paid app, ensure you are using the iTunes account you purchased the app with originally. If it is not, you will be charged for the app again. For more information regarding downloading previously purchased items, see this article.
    I hope this information helps ....
    Have a great day!
    - Judy

  • AFS ARUN Size Substitution Not Working As Expected

    Hi All,
    I need help with this. If any one of you have worked with AFS ARUN size substitution, kindly provide me with some details on how can I set it up. I am specially interested in setting up size substitution with two-dimensional grids.
    I have setup some examples but it does not work as expected.
    Here is a small example:
    Say I have a size 28/30, 28/32 .........29/30....
    What I want to achieve is that during ARUN if there is a shortage of stock in 28/30 then the remaining requirement qty should be confirmed from size 28/32.
    with my setup after 28/30 it goes into looking for stock in 29/30, which is what I do not want.
    Any inputs will be really appreciated.
    Thanks!!

    srdfrn wrote:
    Hi YOS,
    I tried importing a PCX image into CVI 2010 and then sizing the image to the control and didn't see the behavior you have been describing.  Would you mind posting an example (alongside an image file) that demonstrates this?
    Also, one thing I noticed is that PCX images appear to be quite dated.  Could upgrading them to a JPEG or PNG format be an option for you?
    Thanks,
    Stephanie R.
    National Instruments
    Stephanie, thanks for the reply.
    I am very sorry to state that I made a mistake.
    VAL_SIZE_TO_IMAGE indeed works.
    What fails to work is VAL_SIZE_TO_PICTURE. (Second option in Fit Mode attribute in control editing panel)
    I tried with JPEG and it's the same.
    I am attaching an example.(Load_Image.c & ONEP_3Trow_POS1.JPG)
    A panel with two picture rings.
    - SW_1 remains at the intended size and the loaded picture is not clear.
    - SW_2 will fit to picture size and looks OK.
    Appreciate your support,
    YOSsi Seter
    Attachments:
    Load_Image.c ‏2 KB
    ONEP_3Trow_POS1.JPG ‏4 KB

Maybe you are looking for

  • Streaming from Denon receiver to Airport Express Base Station?

    Hello, i know it's possible to strem music, video, etc. from your apple device to a Denon receiver with airplay, but is it also possible, to stream sound from the Denon receiver to an Airport Express Base Station? I'm about to purchase such a Denon r

  • IPOD help

    I'm switching my ipod from my pc to my Mac Book Pro. I plugged it in the USB port and I tunes doesn't recognize my ipod (it does, it just refuses to recognize it in i tunes, or any of my music.) Now, all my music is deleted from my ipod as well!!! He

  • Restrict GRN before Pre-payemnt

    Please help me with following requirement. I want to raise a Purchase Order for a certain material to a single vendor with a pre-payment of 40% (out of total PO value).  How do I make sure that until invoice for the Pre-payment is raised in SAP, that

  • Crystal Reports 2008 and Postscript

    Hello, I think I have to start a new thread for this. Originally I described the problem here: Printing Crystal Report to Postscript Now we upgraded our Crystal Reports for Visual Studio 2005 to the latest version - CR 2008 SP0. We had purchased the

  • What exactly is a shared hyperlink destination?

    Well, nothing in the documentation explains what a "shared hyperlink destination" actually is.  The very name itself ("shared hyperlink destination") implies that you've got two separate links in your document both pointing to, say, adobe.com (the de