Mulit-colored artifacts using Spot Healing Brush-CS3.

This is the first time using this tool. Not sure what's causing this (see attached screengrab of tiff image captured at 200% view). These colored artifacts happen only after using the Spot Healing Brush tool in CS3 AFTER I save, close and reopen the tiff file. I have compression turned off saving scanned image as a tiff.
Is this possible file corruption? I'm thinking it may be from using a soft brush but don't understand why it would only show up after a save, close and reopen. It doesn't show up right when I apply the edit.

R_Kelly, I appreciate your attempt at explaining this. But I think you should know after I scanned the old B&W photographic print as a 16bit RGB tiff, I selected out the red channel, converted the image to grayscale and edited to final tonality. After that I converted to ProPhotoRGB (dithering off-16bit), duped the image and applied a sepia effect using Photo Filter on one copy, another sepia colorization in Variation on the other and combined the two blending at 50% opacity. (Note: to add this sepia effect I was forced to work in 8 bit, but these artifacts showed up even in other scans of old B&W photos in 16 bit color).
There was no clipping of data in the mid-range where these artifacts showup (and no where else in the image using this tool as well-just this one spot on the face). There was a minimal amount of clipping in the red channel highlights from small specs scanning 100 year old paper.
I did a google search on this and it doesn't seem to be prevalent which made me wonder what was going on. One RetouchPro.com thread shows up mentioning artifacts associated with Spot Healing Brush but no specifics on what type of artifacts. I posted over there and no one confirmed this was typical behavior of this tool as well.
So I'm really only concerned in knowing if this is normal behavior from this tool and not corruption of the tiff file. I found a workaround to noticeably reduce these artifacts by working on a layer set to 50% opacity. It appears setting the SHB panel option to "Create Texture" makes it worse compared to "Proximity Match".
This is a VERY handy tool for smoothing paper texture and film grain in scanned enlargements of old photos without making it look like smooth plastic.

Similar Messages

  • How do I get Content-Aware back when using Spot Healing Brush?

    How do I get the Content Aware Button back at the top of the page when using Spot Healing Brush?

    I think you're on the healing brush tool rather than the spot healing brush.

  • Photo moves while using spot healing brush

    I've been using the spot healing brush basically on every photo but recently when I go to use it and press Option to get a clone source and then click my mouse the photo will move everywhere the mouse moves and not allow for a touch up.
    It doesn't matter if I'm clicking the mouse the whole time or not, it just happens when i click once while using the healing brush.
    I've tried reseting work space reseting my computer everything and I'm just desperate right now to figure out how to fix it.
    because my latest photo shoot is of a young girl covered in acne and the spot healing brush is the best when it comes to making it blend.
    i've asked everyone i know who uses photoshop and they have no idea. I can't be the only person this has happened to.

    I guess you meant the healing brush? (the clone overlay is not supposed to be active with the
    spot healing brush)
    If your using cs4/cs5, check Clipped or Auto Hide in the clone source panel (Window>Clone Source) and see if that's better.
    MTSTUNER

  • Photoshop CC and 2014 spot healing brush tool causing blue screen on windows 8.1

    Hi,
    The problem is when I'm using spot healing brush tool soon as apply it it causing fatal error on my windows. I have all suite up to date.
    please advice.

    First thing to do is check you have all the latest device drivers for all your devices and all windows 8 updates. Printer drivers, Display Drivers, Network drivers etc.   It is not possible for an Application program like Photoshop.exe to cause a Blue Screen. However Applications use devices and device drivers are able to do things application programs can not do.

  • My red eye tool is not under the Spot Healing Brush, Photoshop CS3  Help?

    I have Photoshop CS3 and I just recently downloaded it to my new computer. My red eye tool is not under the spot healing brush like it is suppose to be. where could it have gone? any help would be greatly appreciated! thanks!
    Jolene

    What tools do you see in the flyout menu?
    (click and hold to see the flyout menu)
    What happens if you use Shift+J to cycle through the 4 tools in that slot in the toolbox?

  • Editor spot healing brush using slider to adjust size

    Is there anyway to make the "slider for size adjustment" more visible when using Editor Spot Healing Brush"?
    On my system, the slider bar is black and against the dark gray of the Editor Screen" it makes it very difficlt for me see it.

      Try using the square bracket keys on the keyboard.
    [ to decrease size
    ] to increase size
     

  • Photoshop Elements 9 shutting down when using the Spot Healing Brush

    Hello! I recently downloaded and
    installed the PSE 9 on my PC. Obviously I wanted to check out it's possibil
    ities and especially the Spot Healing Brush. The program seems to work fine until I want to use the Spot Healing Brush
    As soon as I try to apply something to a picture, I get the message something is wrong with "photoshopeditor.exe" and needs to shut down the program.
    That's really annoying and hopefully someone may have the answer and solution why it does this. I run the program on Windows XP (SP3).
    I really appreciate your help. Best regards, CharlesHHH.

    Hello MTSTUNER,
    Somehow my post showed up twice. Anyway...just updated to 9.01 and problem solved!!
    Thanks so much for your quick feedback. Much appreciated. Will now go into exploring its possibilities.
    Best regards,
    CharlesHHH

  • Photoshops elements 9 shuts down when using the Spot healing brush

    Hello all, I just downloaded and installed a trial version of Photoshop Elements 9. Of course I wanted to use that supposedly great "heal" tool. The program seems to work fine, but as soon as I use the Spot Healing Brush, I get the message that something occured and the program has to shut down. It's installed on a Windows XP, SP3 PC. Can anyone shed some light on why this is happening? I appreciate you help. Best regards,

    Hello MTSTUNER,
    Somehow my post showed up twice. Anyway...just updated to 9.01 and problem solved!!
    Thanks so much for your quick feedback. Much appreciated. Will now go into exploring its possibilities.
    Best regards,
    CharlesHHH

  • Could not use the spot healing brush because of an internal error!

    Hi All. I have been trying out the Photoshop CC trial and all is well but all of a sudden I have been getting the "could not use the spot healing brush because of an internal error" message when I'm using the healing brush rapidly! I'm sending the tiff file from Capture One Pro 8 as a Tiff file so I'm not sure if this has anything to do with it.
    Many Thanks

    Hi it does not crash but I looked in the Photoshop Crashes folder anyway and it was empty! The message flags up and then press OK to remove it.

  • Problems using the Spot Healing Brush

    I've tried to use the spot healing brush on a number of photos but it doesn't work at all - I've watched the video tutorial, but wehen I try and use it nothing happens - it appears to be the only part of Lightroom 5 that doesn't work.
    How can I solve this problem?

    Keith,
    This is what happens when I try and use the Spot Healing Brush:
    I can select spots to heal/delete/duplicate - both single and multiple
    After selection and hitting "done" nothing happens.
    Consequently the spots I jhave tried to heral appear on the exported picture.
    I would expect the Spot Healing Brush in Lightroom 5 to acxt the same as in Adobe Photshop Elements 10 - ie. you see the spot disapear, but for some reason it is not.
    Hence the question, as I am wondering whether I'm doing something wrong-I've wateched the tutorial and it doesn't give me any clues as to whether I am doing anything wrong to erase/remove the spots.

  • I using windows seven for Photoshop and when I use the spot healing brush or the brush tool I get a cross hair and not the circle ?

    How do I fix this issue? some time it works and the other times I get the cross hair

    I know this post doesn't really help you guys, but I'm also using PSE9 on a Win7 Intel Quad Core Dell computer and the spot healing brush works fine. I only offer this post to indicate that it apparently is not a universal bug in PSE9. Perhaps an Adobe expert can jump in here and help. I can only offer that in Preferences I do have the RAM dialed up to 80%, but I don't think this is related to your problem.

  • PSE 9 crashes when I use the Spot Healing Brush tool

    When I use the Spot Healing Brush tool PSE9 crashs completly. Is it a bug? In the older version 8 I had no problem.
    I use WIN XP SP2, Intel Pentium 4, 3 Ghz, GPU: NVIDIA Geforce FX 5700, DirectX 9.0c 4.09.00.0904.
    I tried it also on another PC with WIN7 and it caused the same problem.
    Thanks for any adivse

    I know this post doesn't really help you guys, but I'm also using PSE9 on a Win7 Intel Quad Core Dell computer and the spot healing brush works fine. I only offer this post to indicate that it apparently is not a universal bug in PSE9. Perhaps an Adobe expert can jump in here and help. I can only offer that in Preferences I do have the RAM dialed up to 80%, but I don't think this is related to your problem.

  • Error message "cannot use the spot healing brush because the scratch disks are full.  What does this mean? PSE9

    Tried to use the spot healing brush and clone stamp and got error messages "cannot use because the scratch disks are full."  What does this mean? PSE9

    Elements uses drive space to make its calculations, like someone writing down measurements on a scrap of paper. How much free space is there on your hard drive?

  • Photoshop CS5 Spot Healing Brush only blurs

    Here's a before and after shot.  I recently upgraded from CS3 and the spot healing brush always worked great. 
    Now when I use it, whether or not I use content aware fill, it leaves a blurred residue of what I was trying to remove. 
    As an aside, the Content Aware Fill leaves a similar residue, enough to make it effectively unusable.
    I have included a sample photo of the spot healing brush problem.  Left side is before and right side is after. 
    I just wanted to get rid of the electrical wall socket.  You can see that it's not working.  I am running windows 8 in a 64-bit environtment and running the 64-bit version of Photoshop CS5.5
    Any assitance anyone is able to afford me is greatly appreciated.
    Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x64
    Operating System: Windows NT
    Version: 6.2
    System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
    Physical processor count: 8
    Processor speed: 3392 MHz
    Built-in memory: 16345 MB
    Free memory: 12108 MB
    Memory available to Photoshop: 14658 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Normal
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: False.
    OpenGL Crash File: Not Detected.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: GeForce GTX 660/PCIe/SSE2
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1200, right: 1920
    Video Card Number: 1
    Video Card: NVIDIA GeForce GTX 660
    Driver Version: 9.18.13.546
    Driver Date: 20120731000000.000000-000
    Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
    Video Mode:
    Video Card Caption: NVIDIA GeForce GTX 660
    Video Card Memory: 1536 MB
    Serial number: 95478754394945338970
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64 Bit)\
    Temporary file path: C:\Users\MICK92~1\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      Startup, 1.81T, 1.30T free
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
       ACE.dll   ACE 2010/12/13-23:37:10   64.449933   64.449933
       adbeape.dll   Adobe APE 2011/01/17-12:03:36   64.452786   64.452786
       AdobeLinguistic.dll   Adobe Linguisitc Library   5.0.0  
       AdobeOwl.dll   Adobe Owl 2010/06/03-13:43:23   3.0.93   61.433187
       AdobeOwlCanvas.dll   Adobe Owl Canvas   3.0.68   61.2954
       AdobePDFL.dll   PDFL 2010/12/13-23:37:10   64.341419   64.341419
       AdobePIP.dll   Adobe Product Improvement Program   5.5.0.1265  
       AdobeXMP.dll   Adobe XMP Core   5.0   64.140949
       AdobeXMPFiles.dll   Adobe XMP Files   5.0   64.140949
       AdobeXMPScript.dll   Adobe XMP Script   5.0   64.140949
       adobe_caps.dll   Adobe CAPS   4,0,42,0  
       adobe_OOBE_Launcher.dll   Adobe OOBE Launcher   2.0.0.36 (BuildVersion: 2.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
       AFlame.dll   AFlame 2011/01/10-23:33:35   64.444140   64.444140
       AFlamingo.dll   AFlamingo 2011/01/10-23:33:35   64.436825   64.436825
       AGM.dll   AGM 2010/12/13-23:37:10   64.449933   64.449933
       ahclient.dll    AdobeHelp Dynamic Link Library   1,6,0,20  
       aif_core.dll   AIF   2.0   53.422628
       aif_ogl.dll   AIF   2.0   53.422628
       amtlib.dll   AMTLib (64 Bit)   4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
       amtservices.dll   AMTServices (64 Bit)   4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
       ARE.dll   ARE 2010/12/13-23:37:10   64.449933   64.449933
       asneu.dll    AsnEndUser Dynamic Link Library   1, 7, 0, 1  
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/01/10-23:33:35   64.436825   64.436825
       AXEDOMCore.dll   AXEDOMCore 2011/01/10-23:33:35   64.436825   64.436825
       Bib.dll   BIB 2010/12/13-23:37:10   64.449933   64.449933
       BIBUtils.dll   BIBUtils 2010/12/13-23:37:10   64.449933   64.449933
       boost_threads.dll   DVA Product   5.0.0  
       cg.dll   NVIDIA Cg Runtime   2.0.0015  
       cgGL.dll   NVIDIA Cg Runtime   2.0.0015  
       CoolType.dll   CoolType 2010/12/13-23:37:10   64.449933   64.449933
       data_flow.dll   AIF   2.0   53.422628
       dvaadameve.dll   DVA Product   5.0.0  
       dvacore.dll   DVA Product   5.0.0  
       dvaui.dll   DVA Product   5.0.0  
       ExtendScript.dll   ExtendScript 2011/01/17-17:14:10   61.452840   61.452840
       FileInfo.dll   Adobe XMP FileInfo   5.0   64.140949
       icucnv36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896  
       icudt36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896  
       image_flow.dll   AIF   2.0   53.422628
       image_runtime.dll   AIF   2.0   53.422628
       JP2KLib.dll   JP2KLib 2010/12/13-23:37:10   64.181312   64.181312
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1263  
       MPS.dll   MPS 2010/12/13-23:37:10   64.450375   64.450375
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.6871  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.6871  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.6871  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS5.1   CS5.1  
       Plugin.dll   Adobe Photoshop CS5   CS5  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   2.5.0.232  
       PSArt.dll   Adobe Photoshop CS5.1   CS5.1  
       PSViews.dll   Adobe Photoshop CS5.1   CS5.1  
       SCCore.dll   ScCore 2011/01/17-17:14:10   61.452840   61.452840
       tbb.dll   Threading Building Blocks   2, 1, 2009, 0201  
       TfFontMgr.dll   FontMgr   9.3.0.113  
       TfKernel.dll   Kernel   9.3.0.113  
       TFKGEOM.dll   Kernel Geom   9.3.0.113  
       TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
       updaternotifications.dll   Adobe Updater Notifications Library   2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   2.0.0.15
       WRServices.dll   WRServices Thursday January 21 2010 12:13:3   Build 0.11423   0.11423
       wu3d.dll   U3D Writer   9.3.0.113  
    Installed plug-ins:
       Accented Edges 12.0
       ADM 3.11x01
       Angled Strokes 12.0
       Average 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Bas Relief 12.0
       BMP 12.0.2
       Camera Raw 6.3
       Chalk & Charcoal 12.0
       Charcoal 12.0
       Chrome 12.0
       Cineon 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Color Halftone 12.0.2
       Colored Pencil 12.0
       CompuServe GIF 12.0.2
       Conté Crayon 12.0
       Craquelure 12.0
       Crop and Straighten Photos 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Crop and Straighten Photos Filter 12.0.2
       Crosshatch 12.0
       Crystallize 12.0.2
       Cutout 12.0
       Dark Strokes 12.0
       De-Interlace 12.0.2
       Difference Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Diffuse Glow 12.0
       Displace 12.0.2
       Dry Brush 12.0
       Eazel Acquire 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Embed Watermark 4.0
       Extrude 12.0.2
       FastCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Fibers 12.0.2
       Film Grain 12.0
       Filter Gallery 12.0
       Fresco 12.0
       Glass 12.0
       Glowing Edges 12.0
       Grain 12.0
       Graphic Pen 12.0
       Halftone Pattern 12.0
       HDRMergeUI 12.0
       IFF Format 12.0.2
       Ink Outlines 12.0
       JPEG 2000 2.0
       Lens Blur 12.0
       Lens Correction 12.0.2
       Lens Flare 12.0.2
       Lighting Effects 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Liquify 12.0.1
       Matlab Operation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Measurement Core 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Mezzotint 12.0.2
       MMXCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Mosaic Tiles 12.0
       Multiprocessor Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Neon Glow 12.0
       Nik Selective Tool 2.1.4.20894
       Note Paper 12.0
       NTSC Colors 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Ocean Ripple 12.0
       OpenEXR 12.0.2
       Paint Daubs 12.0
       Palette Knife 12.0
       Patchwork 12.0
       Paths to Illustrator 12.0.2
       PCX 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Photocopy 12.0
       Picture Package Filter 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Pinch 12.0.2
       Pixar 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Plaster 12.0
       Plastic Wrap 12.0
       PNG 12.0.2
       Pointillize 12.0.2
       Polar Coordinates 12.0.2
       Portable Bit Map 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Poster Edges 12.0
       Radial Blur 12.0.2
       Radiance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Read Watermark 4.0
       Reticulation 12.0
       Ripple 12.0.2
       Rough Pastels 12.0
       Save for Web & Devices 12.0
       ScriptingSupport 12.1
       Shear 12.0.2
       Silver Efex Pro 2 2,006
       Silver Efex Pro 2 2,006
       Smart Blur 12.0.2
       Smudge Stick 12.0
       Solarize 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Spatter 12.0
       Spherize 12.0.2
       Sponge 12.0
       Sprayed Strokes 12.0
       Stained Glass 12.0
       Stamp 12.0
       Sumi-e 12.0
       Targa 12.0.2
       Texturizer 12.0
       Tiles 12.0.2
       Torn Edges 12.0
       Twirl 12.0.2
       Underpainting 12.0
       Vanishing Point 12.0
       Variations 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Water Paper 12.0
       Watercolor 12.0
       Wave 12.0.2
       WIA Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Wind 12.0.2
       Wireless Bitmap 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       ZigZag 12.0.2
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Access CS Live
       Flash
       Kuler
       CS Review
    Installed TWAIN devices: NONE

    In my opinion, there's nothing wrong with your choice of Spot Healing Brush for this image. I cropped your screenshot to the "BEFORE" image, removed the "BEFORE" type (with the SHB) and scaled to 600% to match your original document.
    A dab of a 0% hardness 500 pixel Spot Healing Brush in Ps CS5.1 on OS X 10.6.8 worked perfectly. However, I would have made a vertical stroke with the brush at about 80% hardness and about 200 pixels, which also works for me.
    Maybe your SHB is working in "Create Texture" mode despite specifying "Proximity Match" in Options bar. Try resetting the SHB by right-clicking its icon at left of Options bar and picking "Reset Tool" from the menu that appears.

  • Spot healing brush tool luminosity not working as expected?

    I have a question about the content aware spot healing brush tool:
    The normal and replace mode work just fine as expected... the color mode does indeed a fine job fixing the color cast of i.e. small green or purple lens flares, by picking up the surrounding color.
    The next mode after color, called luminosity, should work in the same fashion: it should pick up the surrounding brightness (luminosity), and adjust the relative brightness of the area to be patched (i.e. reduce the brightness of a small lens flare, and preserve the texture underneath).
    Instead, luminosity doesn't work much different than the normal mode, it creates a new texture (based on content aware or surrounding area), and thereby destroying the original texture, instead of just fixing the local brightness.
    My question for Adobe: is this behavior intentional? or was the luminosity mode "overlooked" by accident?

    Here are some examples of how the brush is working in a real world example:
    As I have mentioned, normal, replace, and color work exactly as expected. color in LAB mode works even better than in RBG mode.
    what is not working as (at least by me expected) is luminosity mode (even if the color mode brush is used first). I thought/had hoped for that the luminosity mode would work some magic without creating new textures (the color mode is only very very lightly adding a new texture).
    I just wanted to hear what the logic behind this mode is... (and possibly find a 1-2 click tool to fix those lens flares.)

Maybe you are looking for

  • How to get the selected values from multiselected list

    Hi, I have a multiselect list displaying all the years from 2003 to 2008 (used dynamic LOV). The user can choose one or more years as per his needs, and then when user clicks on the link the selected values of the list are to be captured and a pop up

  • Negative sign for Currency fields

    Hello experts, If a currency field containt -Ve sign (86.47-) then, i have to move it this sign to Left sinde. I have do this as follow by moving the currency field value to Charractor field DATA:  w_total1 (18).              MOVE w_total To w_total1

  • ISE and MS Active Directory Integration Issue

    It appears that our ISE 1.2 solution is having issues with nested MS AD Groups. The first login attempt always fails, the second occasionally works and the third always works. Has anyone else experience this login issues with ISE 1.2 and MS AD? Sent

  • Why field length is shorter than the actual one in a SQL query based grid?

    Hi, I have a grid based on a SQL query on a UDO table, but I found when I retrieve the data from a SQL query some column show only part of data. For example, in SQL server the query should return one column data like "ABCD", but in the grid it only s

  • Cant e-mail any bounces  HELP!!

    That pretty much says it, I can't email any bounces in any format or size from any email service (Logic Pro 9)... I can send any mp3 from my computer, just not any logic bounces.... please help...