Mulitple language in Long text
HI all,
Is it possible to mainitan multiple languages in long text?
I have a message maintained in SE91 transaction in English and i have used translation for this message into French. I also want to maintain long text for this. It is allowing me to maintain long text for this message in English but i do not see an option to maintain n french as well. Can someone help?
Thanks,
Venkat
Hi Pawan,
That is how i have maintained for the short text. I created a message in SE91 (in english) and using GOTO->Translation , i have maintained the french translation for the same. This GOTO->TRANSLATION is only for short texts. I want to maintain long text for this message in both English and french. I am able to see the longf text in english but just clueless as to how to maintain the long text in french as well.
Regards,
Venkat
Similar Messages
-
How to maintain long texts in different languages in a message class
Hi All,
I have maintained a message and its transaltions in some other languages in a custom message class. I have maintined the long text in English language. But I am not getting how to maintain the long text in other languages.
Please help.
Regards
KiranHi Kiran,
Good!
In the message class corresponding to that message give the place holders &&&&.
Like 001 &&&&
in the program.
Message <class>001 with text-001 text-002 text-003 text-004.
then you could disply long text.translation takes place if u enter in different language automatically.
thanks,
Sunil. -
Long Text 0000000015120044ZOH ID ZOH language EN not found
Hi Good day,
i am trying to Create, Save and Read the long Text.
for that i have done the following.
1. SE75 Created the Object and Object ID Ex :
Now when i implement the logic in the Program,
at the end when i execute ,
1. it does the CALL FUNCTION 'INIT_TEXT' successfully , SAVE_TEXT Successfully but when i try to READ_TEXT it says
Text 0000000015120044ZOH ID ZOH language EN not found
this is my logic
TABLES : ZEHS00_EXA_CARD.
PARAMETERS SRV_NUM TYPE CHAR16.
DATA: textname LIKE thead-tdname,
func,
co_co LIKE sy-index.
* Interne Tabellen
DATA t_tf02hz LIKE thead OCCURS 0 WITH HEADER LINE.
DATA t_tf02lz LIKE tline OCCURS 0 WITH HEADER LINE.
DATA: ltxtflg LIKE bapistdtyp-boolean.
DATA : l_text_tab LIKE tline OCCURS 100 WITH HEADER LINE.
DATA: ltxtflg1 LIKE bapistdtyp-boolean.
DATA : l_text_tab1 LIKE tline OCCURS 100 WITH HEADER LINE.
DATA : description(225).
DATA : description1(225).
DATA: line(132) TYPE c,
text_tab LIKE STANDARD TABLE OF line,
text_tab1 LIKE STANDARD TABLE OF line,
WA_TAB LIKE STANDARD TABLE OF LINE,
WA_TAB1 LIKE LINE OF text_tab1,
field LIKE line.
DATA: line1(132) TYPE c,
field1 LIKE line.
DATA: e_header TYPE thead,
i_header TYPE STANDARD TABLE OF thead,
w_tline TYPE tline,
i_tline TYPE STANDARD TABLE OF tline WITH HEADER LINE.
e_header-tdobject = 'ZSYS_ACT1'.
e_header-tdid = 'ZOH'.
e_header-tdspras = sy-langu.
e_header-tdlinesize = 072.
CONCATENATE SRV_NUM e_header-tdid INTO textname.
CALL FUNCTION 'C14G_TEXT_INPUT_EDIT'
EXPORTING
i_windowtitle = 'Systolic action Description'
i_tablename = 'CCIHT_IP'
i_fieldname = 'ACDESC'
i_language = sy-langu
i_actype = 'X'
TABLES
x_text_tab = l_text_tab
CHANGING
x_text = description
x_ltxtflg = ltxtflg.
CALL FUNCTION 'INIT_TEXT'
EXPORTING
id = 'ZOH'
language = sy-langu"'E'
name = textname
object = 'ZSYS_ACT1'
IMPORTING
header = t_tf02hz
TABLES
lines = t_tf02lz.
LOOP AT l_text_tab.
MOVE :l_text_tab-TDLINE TO LINE.
APPEND line TO t_tf02lz.
ENDLOOP.
CONCATENATE SRV_NUM e_header-tdid INTO e_header-tdname.
** APPEND 'DevComments for Obj 1' to i_tline.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
client = sy-mandt
header = e_header
savemode_direct = 'X'
TABLES
lines = i_tline
EXCEPTIONS
id = 1
language = 2
name = 3
object = 4
OTHERS = 5.
CLEAR : l_text_tab[].
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = 'ZOH'
LANGUAGE = 'E'
NAME = e_header-tdname"textname
OBJECT = 'ZSYS_ACT1'
TABLES
LINES = l_text_tab."t_tf02lz.
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.
IF l_text_tab[] IS NOT INITIAL.
ENDIF.
thank you,
J.Hi,
Go to tcode SE11 check table STXH whether the text stored in it. If yes, then see the layout of field TDNAME.
Thanks.
Regards,
Keng Haw -
Creating a long text using ABAP code.. fm SAVE_TEXT
When you create an order via IW31 one of the options is to click on the text button and create a long text. I am basically trying to mimic this action from within my ABAP code.
The text id details are as follows:
Text Name 500000015000046 which is (5000000 + order number)
Language EN
Text ID KOPF Order header text
Text Object AUFK Order text
If i manually create the text within the transaction i am then able to view and update it via function modules READ_TEXT and SAVE_TEXT. But if the text has not already been created READ_TEXT obviously returns nothing as it does not exist and SAVE_TEXT does not seem to created it!
Anyone know how i would go about creating this text using ABAP code?
Hope this make a bit of sense
Thanks in advance
MartI have implemented the code as i think it should be. See below, can any see what is wrong. If i add init_text it makes no difference and adding the commit_text just makes it hang
DATA: IT_TEXTS type standard table of TLINE,
wa_texts like line of it_texts,
wa_txtheader type THEAD.
wa_txtheader-TDID = 'KOPF'.
wa_txtheader-TDSPRAS = 'EN'.
wa_txtheader-TDNAME = '500000015000056'.
wa_txtheader-TDOBJECT = 'AUFK'.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
CLIENT = SY-MANDT
HEADER = wa_txtheader
INSERT = 'X'
SAVEMODE_DIRECT = ' '
OWNER_SPECIFIED = 'X'
LOCAL_CAT = ' '
IMPORTING
FUNCTION =
NEWHEADER =
TABLES
LINES = IT_TEXTS
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
I am trying to upload the purchase order long text in mm01 using BAPI
Hi All,
I am trying to upload Purchase Order Long text (which is in chinese Language) and Language field with ZH(chinese) in MM01 using BAPI_MATERIAL_SAVEDATA.
It is uploading properly, But in the Language field it is showing Z1(Customer reserve) instead of ZH(Chinese).
What could be the reason for this and how it can be resolved.
Thanks in advance,
RajaHi,
Which input parametr did you use? See table T002
LANGU = '1'
LAISO = 'ZH'
Rgds,
JP -
Display a Long Text in ALV report
Hi,
I want to display the PO header long text in ALV Report that is 255 character width.
Please help me out how to do this.
please it is very urgent
Thanks and regards
KrishnaUse READ_TEXT and concatenate the first lines of the text.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'F01'
language = sy-langu
name = lv_name " purchase order with leading zeroes
object = 'EKKO'
TABLES
lines = t_lines
EXCEPTIONS
OTHERS = 8.
Regards -
i want to print a description in text mode which is 5-6 lines some times it have a blank line also so
how to print in ALV .i m using READ_TEXT function but sumtime it not works when text exceed 4-5 lines
what i sud do.hi,
there is another way u can use yours internal table field like long text field. that is.
parameters: salno type vbak-vbeln.
data: begin of itab occurs 0,
vbeln type vbak-vbeln,
matnr type vbap-matnr,
longtext type thead occurs 0,
end of itab.
data: itabstxl type standard table of stxl with header line.
select single vbakvbeln vbapmatnr into (itab-vbeln, itab-matnr)
from vbak inner join vbap
on vbakvbeln = vbapvbeln
where vbak~vbeln = salno.
select single tdobject tdname tdid tdspras from stxl
into (itabstxl-tdobject,itabstxl-tdname,itabstxl-tdid,itabstxl-tdspras)
where relid = 'TX'
and tdobject = 'VBBK'
and tdname = salno "YOUR OWN TDNAME e,g
and tdid = 'Z003'
and tdspras = 'EN'.
call function 'READ_TEXT'
exporting
CLIENT = SY-MANDT
id = itabstxl-tdid
language = itabstxl-tdspras
name = itabstxl-tdname
object = itabstxl-tdobject
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
HEADER =
tables
lines = itab-longtext
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
break abaper.
I HOPE THIS WILL SOLVE THIS WILL SOLVE THE PROBLEM OF THE OTHERS AS WELL. -
Hi Everyone,
I have a requirement where I need to display the Longtext that is displayed in transaction IW33.
Its is not the KTEXT feild pf table AUFK as this feild contains data upto 40 characters.
My requirement is to fetch all the characters that are in Longtext.
There must be a table where the long text is saved.
Please let me the table ???
Regards,
RajPress Display Text button in front of long text.You will go to editor.Then from the munubar select Go to->Header.Use these header details:
Text Name <Order no.>
Language EN
Text ID KOPF Order header text
Text Object AUFK Order text
Pass this to FM READ_TEXT.You can also refer the tables STXH and STXL but i guess FM will solve your problem. -
Hi,
I need to get the long text that we maintained in CJ20n tcode under long text at project level. I need to display the same in Script layout or report. I didnot find any table or functional module to get it. please help me out.
regards,
ChandraHi
Double click on the Long text, it will take you to Text editor
from the Menu GOTO-> HEADER
you will find the OBJECT,ID,OBJECTNAME and LANGUAGE parameters for that lang text which are to be passed to the READ_TEXT fun module
for displaying it on report use the above fun module and fetch the text in IT_LINES internal table and write it on report output
You can also see the doc of the read_text
READ_TEXT
READ_TEXT provides a text for the application program in the specified work areas.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
Function call:
CALL FUNCTION 'READ_TEXT'
EXPORTING CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters:
CLIENT
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
IN SCRIPTS you can use the INCLUDE statement to print the Long texts
/: INCLUDE TEXT<name> ID <id> Lang <en> paragraph <za>
Regards
Anji -
How to add long text in bdc for transaction fb01 ?
IN the existing program of bdc fb01
i have to add a long text field
but it gets stuck while i process in sm35
is there a fm to add the field directly
thanks in a advanceHi
You can upload the Long texts separately into the transaction using the CREATE_TEXT fun module
Need to pass the correct parameters like OBJECT,ID, OBJECTNAME and LANGuage with the proper declarations.
see the sample code and do accordingly
REPORT zmm_longtext_sm
NO STANDARD PAGE HEADING
LINE-SIZE 255.
Description : This Program is used to Upload the Service Master
: Long Texts using the Fun Module CREATE_TEXT
Internal Table for Upload of Long Texts Data
DATA: BEGIN OF itab OCCURS 0,
asnum like asmd-asnum, " Service No
text LIKE tline-tdline, " Long Text
END OF itab.
To create Long Text lines for CREATE_TEXT function module
DATA:BEGIN OF dt_lines OCCURS 0.
INCLUDE STRUCTURE tline. " Long Text
DATA:END OF dt_lines.
Variable declarations for CREATE_TEXT function module
DATA : dl_name TYPE thead-tdname, " Object Name
dl_lan TYPE thead-tdspras. " Language
Constants
CONSTANTS:
Object ID for Long Text of Service Master
c_best TYPE thead-tdid VALUE 'LTXT',
c_material TYPE thead-tdobject VALUE 'ASMD'. " Object
Parameters
PARAMETERS p_file LIKE rlgrap-filename.
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
Start Of Selection
START-OF-SELECTION.
*To Upload Flat file
CALL FUNCTION 'UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = itab
EXCEPTIONS
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
OTHERS = 7.
Upload the Texts
SORT itab BY asnum.
LOOP AT itab.
dt_lines-tdformat = 'ST'.
dt_lines-tdline = itab-text.
APPEND dt_lines.
dl_lan = sy-langu.
concatenate '00000000000' itab-asnum into dl_name.
Call the Function Module to Create Text
CALL FUNCTION 'CREATE_TEXT'
EXPORTING
fid = c_best
flanguage = dl_lan
fname = dl_name
fobject = c_material
save_direct = 'X'
fformat = '*'
TABLES
flines = dt_lines
EXCEPTIONS
no_init = 1
no_save = 2
OTHERS = 3.
IF sy-subrc <> 0.
WRITE:/ 'Long Text Creation failed for Service No'(001),
itab-asnum.
ELSE.
WRITE:/ 'Long Text Created Successfully for Service No'(002),
itab-asnum.
ENDIF.
AT END OF asnum.
REFRESH dt_lines.
ENDAT.
ENDLOOP.
<b>Reward points for useful Answers</b>
Regards
Anji -
Hello experts,
I want to store long text field into database using abap oops, any valuable inputs?
I guess i can use internal table and breakup lines to multiple lines, but not sure this would help, any suggestions?
Thanks in advance.
Viralhii,
SELECT single tdtxtlines
from stxh
into v_textline
where tdid = 'Z01A'
and tdname = p_vbeln
and tdobject = 'VBBK'.
if v_textline ne 0.
L_NAME = P_VBELN.
CALL FUNCTION 'READ_TEXT'
EXPORTING
ID = 'Z01A'
LANGUAGE = SY-LANGU
NAME = L_NAME
OBJECT = 'VBBK'
TABLES
LINES = IT_TLINE
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8.
ENDIF.
If you want continous text u can use Loop under this.
Regards,
Sridhar.V -
How to create long text in production order?
Hi,
i have found that i could only change long text in the
production order by 'SAVE_TEXT'.
but i want to create long text and any advice?DATA:TEXT_HEADER LIKE THEAD.
DATA:TEXT_LINES LIKE TLINE OCCURS 0 WITH HEADER LINE.
data: t_ponum like BAPI_ORDER_KEY-ORDER_NUMBER.
t_ponum = '000040000068'.
TEXT_HEADER-TDID ='KOPF'.
TEXT_HEADER-TDOBJECT = 'AUFK'.
TEXT_HEADER-TDSPRAS = sy-LANGU .
CONCATENATE SY-MANDT t_ponum INTO TEXT_HEADER-TDNAME.
clear text_lines.
refresh text_lines.
text_lines-TDFORMAT = '*'.
text_lines-TDLINE = '12567'.
append text_lines.
text_lines-TDFORMAT = '*'.
text_lines-TDLINE = 'lg'.
append text_lines.
text_lines-TDFORMAT = '*'.
text_lines-TDLINE = 'prh'.
append text_lines.
text_lines-TDFORMAT = '*'.
text_lines-TDLINE = 'ueue'.
append text_lines.
CALL FUNCTION 'CREATE_TEXT'
EXPORTING
FID = TEXT_HEADER-TDID
FLANGUAGE = sy-LANGU
FNAME = TEXT_HEADER-TDNAME
FOBJECT = TEXT_HEADER-TDOBJECT
SAVE_DIRECT = 'X'
FFORMAT = '*'
TABLES
FLINES = text_lines
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
CLIENT = SY-MANDT
HEADER = TEXT_HEADER
INSERT = ' '
SAVEMODE_DIRECT = 'X'
TABLES
LINES = text_lines.
CALL FUNCTION 'COMMIT_TEXT'
EXPORTING
OBJECT = TEXT_HEADER-TDOBJECT
NAME = TEXT_HEADER-TDNAME
ID = TEXT_HEADER-TDID
LANGUAGE = sy-LANGU
SAVEMODE_DIRECT = 'X'. -
How to get Long text in report from FBL3N
Hi,
I need to get Long Text from FBL3N (G/L Account Line Item Display) in my report.Can anyone tell me in which table it is stored?Hi
These long texts are not stored completely in any tables
where as the parameters of these texts like OBJECT,OBJECTNAME and ID, LANGUAGE are stored in STXH table
You have to pass these 4 parameters to the fun module READ_TEXT and to fetch the text.
Double click on the long text will goes to text editor
from menu GOTO-> HEADER you will see the above 4 paramters
see the doc of READ_TEXT fun module
READ_TEXT
READ_TEXT provides a text for the application program in the specified work areas.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
Function call:
CALL FUNCTION 'READ_TEXT'
EXPORTING CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters:
CLIENT
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
<b>Reward points for useful Answers</b>
Regards
Anji -
How to upload long text in CA02 Transaction
Hi,
I am getting a file with the following format.
Input File Record Layout:
Group# like PLKO-PLNNR,
Group Counter like PLKO-PLNAL,
Operation# like PLPO-VORNR,
Work Center# like PLPOD-ARBPL,
Control Key like PLPO-STEUS,
Short-text like PLPO-LTXA1,
Long-text type c(1000).
i have to upload the long text in the CA02 transaction. Could you please let me know the procedure that i should follow in uploading this in doing a call transaction in BDC.
Thanks in Advance,
SureshTake a look at FM SAVE_TEXT
To get the parameters of the FM :
Goto the long text in CA02 and then via the menu :
Goto --> Header .
A popup is displayed containing the input parameters :
Text Name
Language
Text ID
Text object.
Hope it helps,
Erwan.
Message was edited by: Erwan LE BRUN -
How to load long text in BOM line item
Hello Experts
How do i load Long text in BOM Line item using LSMW
Thanks
S
Edited by: Alvaro Tejada Galindo on Jan 31, 2008 5:11 PMUse Read_text function module.
you need to pass
ID
LANGUAGE
NAME
OBJECT to the function moduel
To find the Text id name language and object these are the following steps. Example: FB02
1. goto FB02, Enter Document number
2. from menuselect Goto>Header-->header Text..... New window will be displayed
3. select the Header Text. here you can see all the text.
4. click on the TEXT (which you want to know the Text id) , then press log ICON (you can find in bottom right of the text window) it looks like a rolled paper.
5. in the Next window you will find Text Name. Text ID, Language. etc...
Regards,
Lalit Mohan Gupta.
Maybe you are looking for
-
How do I change alphabetical element listing in xml to nested xml using xslt?
Have an 'Bus Card Request' indd form exported to fillable form pdf (reader enabled etc). Have 'Bus Card Template' indd to receive the BC data from the returned filled pdf form. The tags & structure are identical on both indd docs. The xml exported fr
-
Is it possible to give nested ul, li in flash e.g. a.htmlText = "<ul><li>AAAA</li><li><li>BBBB</li></li></ul>"; mine is not working, anybody with clue. Thanks in advance.
-
Integrated planning-config guide for a scenario
hi, Aappreciate if sombody could help me out witha configuration guide for integrated planning for scenarios of cost/profit planning etc...i tried best practice side but the docs were more of BPS email id:[email protected] regards savi
-
I recently got a new laptop which runs on Windows 8 and although I've found the "Authorize" button and followed every single trouble shooting option Apple support suggests, I still can't authorize and further connect to the iTunes store on my compute
-
Desktop app not working. Blank screen showing - Null 1.0.7.5
Hi all, I have seen that a few people seem to have the same probem as me. I have recently set up my new 3TB cloud, but can not get the desktop app to work. it just shows a blank screen with Null 1.0.7.5 I am using Windows 8. Can any one help? I have