Multi-Cam with (2) XDCAM HD and (1) EX

I am getting an error when I try to set-up my multi-cam. It does not like to mix codecs. What should be my next step?

wooh ....you are talking about a miricle if you want to have that data intact from moving the mobo's, with no backup ...the fisr2 has a promise ide raid on ide3...
that would be your best bet just to try but it will have to already have the promiserealtek fast drivers loaded....satas dont have jumpers as they only allow one drive per cable.
now if you want to install new drives on sata when your loading 1 you will need a cd or dvd for the windows cd..ide 2 ..and a floppy drive for the floppy drivers you need to set up xp if you want the os on the satas..in not load the os on ide and add drivers latter .
you will need to turn on sata in bios and set raid on as well if you use ide 3 etc..
thats just a primer.....

Similar Messages

  • Macbook came with an AC cable and an AC plug, is one better for charging than the other?

    Macbook came with an AC cable and an AC plug, is one better than the other for charging?

    The 3-prong AC cable provides for proper gorunding, and will alleviate any "vibration/electrical" sensation on the casework.

  • Charger that came with Ipad gets hot and only charges for a short time or not at all

    charger that came with Ipad gets hot and only charges for a short time or not at all

    Stop using it and Return it to the Place of Purchase and get it checked... ASAP...

  • I'm editing multi cam with 4 cameras and my program keeps freezing up.

    I think that the only way to stop this from happening is to increase my RAM but I wanted to find out, what is the recommended solution? I'm using Premier Pro CC 2015. on Windows 8.1.

    First, that video controller seems to be a board-mounted one ... not "bad" as far as those go, but without it's own supporting cast so to speak. It doesn't seem to have any v-RAM, I'm assuming just uses the RAM of the computer itself. And at 8Gb, that's ... very minimal for the CPU. It's got more guts to the video capability than my laptop does, but not enough to really carry the video weight.
    Second, with only your system drive and one USB3.0 external, your drive capabilities are very low. If that external has a faster-than-normal cache-read/write performance, and the only thing on it was your footage (media), at least the media could get read into the process decently though with multi-cam sequences that's a harder workload than single-clip work. With that setup, however you've got your various parts of the process laid out, you simply don't have the capability to pass data back and forth at playback speeds. Not even close.
    Even a second internal SSD that you could put project files, cache, database, & previews on would improve your performance. It would still be low, but not as way low. That's one of the frustrating things ... these video programs are huge suckers of computer hardware capability. My laptop runs Lightroom & even Photoshop just fine. It's worse than yours for trying to do video on, however. But ... when I got it, I hadn't yet started down the video processing trail. All of 2-1/2 years ago.
    As we can afford it, that will go to my wife ... also a professional portrait photog. I'll get something vastly more potent for the ability to do some video work on it.
    Neil

  • Multi Camera with DSC-HX400V?

    Hi, does anyone tried out the multi camera feature with the Sony HX400V or is that not possible to share the view of both devices?
    Solved!
    Go to Solution.

    I can confirm it works, I have Xperia Z3 Dual (D6633) and Cyber-Shot HX400V coupled in multi-camera mode, here's a screenshot:
    Right: Cyber-Shot HX400V, Left: Xperia Z3 Dual (D6633)
    A proud Sony User since 2002
    If I was helpful to you, thank me by Kudos

  • How can I install Mountain Lion in a VMware fusion, if it came with my macbook pro, and not purchased through the app store?

    I have Mountain Lion on my Macbook Pro with Retina but I want to install Mountain Lion in a VM for application testing. I try to install it from the recovery partition but it states that when I put in my apple ID, it states that it was not purchased through the App Store. My OS came with my Macbook. Is there anything that I can do to get it to install in a VM?
    Thanks

    Not really. The license that comes with pre-installed OS is only for that Mac.
    A. Preinstalled and Single-Copy Apple Software License. Subject to the terms and conditions of this License, unless you obtained the Apple Software from the Mac App Store or under a volume license, maintenance or other written agreement from Apple, you are granted a limited, non- exclusive license to install, use and run one (1) copy of the Apple Software on a single Apple- branded computer at any one time. For example, these single-copy license terms apply to you if you obtained the Apple Software preinstalled on Apple-branded hardware.
    vs
    B. Mac App Store License. If you obtained a license for the Apple Software from the Mac App Store, then subject to the terms and conditions of this License and as permitted by the Mac App Store Usage Rules set forth in the App Store Terms and Conditions (http://www.apple.com/legal/ itunes/ww/) (“Usage Rules”), you are granted a limited, non-transferable, non-exclusive license:
    ( i ) to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software...
    (ii) If you are a commercial enterprise or educational institution, to download, install, use and run one (1) copy of...and
    (iii) to install, use and run up to two (2) additional copies or instances of the Apple Software within virtual operating system environments on each Mac Computer you own or control that is already running the Apple Software, for purposes of: (a) software development; (b) testing during software development; (c) using OS X Server; or (d) personal, non-commercial use.
    (I shortened B.i. and B.ii.)
    http://www.apple.com/legal/sla/docs/OSX1082.pdf

  • Reset not working on iPad Air. I just bought this iPad Air from an individaual.  It was listed as new and came with the box, charger, and guide.  The seller said it was jail broken and I told him I did not want it jail broken  and he said he would reset

    He said he would reset it to factory and I said ok I would purchase it.  He supposedly received it as a gift from his business and already had one.  Well it all looks in new condition and powers up and down ok, and connected to WIFI when I checked it out at Starbucks.  SIRI worked, Safari and the camers worked so I took it.  Nothing was on the screen but standard  app symbols you see on a new iPad.  I compared it to a display at a store.
    Well when I got it home I plugged it into my computer and it asked me to trust and I said yes ond on the Air it asked to ok it and I did.  Then I tried to go to App store and it came up and asked for the password for a Apple ID.  Of course I did not have it.  I then tried to do a reset.  I went to Settings and did a reset erase everything.  It asked me twice if I wanted to reset as it was not recoverable.  I said yes.  It did not ask for and Apple ID or password. The Air reset started and the Apple logo came up and a bar started to move arcoss under it.  It almost became a full bar when the screen went blank and the little small rotating symbol came up.  It just kept rotating and never finished.  Had to do a hard reset holding the Home and Sleep button for 10 seconds and the the Air came back.  Everything is working on the Air except I can not get it to reset and link it up to my computer itunes.
    It is on IOS 7.0.4
    I hope I am not out my $475.  Any help would be appreciated.  Any options or suggestions.
    Thanks.

    You need to return it to the seller and get your money back.  You cannot reset or use the device with another AppleID installed unless you know the password for that ID.
    If the device has been jailbroken, no one on here can give you any further help...the Terms of Use prohibit us from doing so.

  • Using pulnix tm-1320-15 lvds camera with pci-1422 lvds and ni's icd file

    The camera provider give me a custom-made-cable.
    Its pinout configuration is based on the ni's wiring diagram. (not opened)
    But because of the problem of power supplying, the serial communication pins cannot be used.
    With the icd file for tm-1320-15 in this site, I cannot get an image, but only the error messages of "IMG_ERR_TIMO" and dma error.
    So I've tried some solutions suggested in this forum such as acquisition image reducing(the result is noisy one) and moving the 1422 closer to the cpu board. But all failed with that message.
    I doubt that there must be an only one setting for tm-1320-15 camera and camera configuration in MAX 2.0 in case of "serial disabled", or the icd file is not
    proven in lvds version.
    (Is "OnBoardClock(20)" right? the camera works at 25MHz according to its manual. )
    Is there anyone succeeded in this combination?
    (Thank you for reading my poor english. T.T )

    My problem is solved now.
    But I don't know what is the exact solution.
    The camera & cable provider and me tried as below.
    try-1. connecting tm-1320-15 and 1422 with serial-enabled cable
    try-2. changing 'OnBoardClock(20)' to 'OnBoardClock(25)'
    With only 'try-1 ', it failed. but additional 'try-2' we could snap and grab the camera image.
    And now, I can get images without serial-enabled cable, regardless of OnBoardClock speed.
    I think the camera has been initialized with max's parameters(same as icd file) when the serial commnunication had enabled for the first time.
    (I'll verify this assumption with new tm-1320-15 later.)
    Thank you.
    Tip : If tm-1320-15 and 1422 makes error because of parameter mismatching, reset the tm-1320-15's power.

  • PC based iTunes And multi play with Airport Express device and a Marantz CR-603

    I have iTunes on my PC and use the iPad as my 'remote' as I want to be able to have two different systems playing. I have a Cyrus Hi Fi in the lounge with  Airport Express added which works fine, and a Marantz CR 603 system in the kitchen which also works fine, when either is sourced from the iPad. When I switch to remote for multi-play using the PC I can't get the PC to identify the Marantz AND the Airport Express together. The PC just can't pick up the Marantz, even though it works fine from the iPad. The PC can see the Airport Express and, of course, itself. The system uses a hard wired Ethernet from the hub to the Marantz. Everything else is operating via wireless. Help!?

    I found a solution!
    Quit iTunes, restart the "Bonjour Service", start iTunes, done! :-)
    best regards,
    ullala :-)

  • I am looking for a POS software for multi-users with mobility via 3G and Wi-Fi

    Our company distributes food products to grocery, convenient and pharmacy stores, etc. We currently have an old cumbersome hard to use PC system that interfaces with driver's handhelds, keeps records of sales and monitors inventories on trucks and several warehouses. All our company uses MAC systems with the exception of this PC system. The closest I've come to find a MAC software is Lightspeed but it lacks mobility. Does any one know a good reliable POS system with Mobility hopefully to utilize either iPhones with bar code readers?

    Pages can export documents in MS Word format. When I last did this (with Pages '09, the Mac version), the result was a .doc file.
    Note that this is a translation, and like most translations, it's not always a perfect one. Some features of Pages are not supported in MS Word, and some Word features are not supported in Pages.
    For a more precise answer wrt Pages for iOS, you should repost your question in the iWork For iOS community. The link will take you there.
    Regards,
    Barry

  • Can the usb sync/power cable that came with the iPhone 3g and 4 handle the 2.1 amps drawn by the ipad 2 (if used with the 10w plug) without risk of overheating?

    I recently made the mistake of buying a cheap sync cable from a well known auction site becuase I wanted a longer cable than comes in the box for my ipad 2.
    Whilst my iPad will sync OK, it takes an age to charge (using the standard 10w plug in the wall). I don't fully understand the science in the cables, but assume it is not a big enough cable to handle the current/2.1 amps?.
    If like house wire you send too much current through a cable that is to small for the job it risks overheating and causing a fire.
    Does this same principle apply to the iPad power lead?
    Anyway back to the question, can I use other leads I have hanging around the house from my previous iphones and ipods to charge my ipad (again still using the 10w plug in the wall) or will the cable in these be too small to handle the 2.1 amps required by the ipad?
    I don't want to risk overheating the cables and causing a short to break my beloved iPad 2...!

    Thanks for your replies.
    Not sure they entirely answer my question though.
    I have used my different cables and can see that they are actually working (charging and syncing etc), but am i using old cable that was not intended to draw 2.1 amps and so may overheat and cause damage in the long run?
    Or did apple deliberately over engineer the original cables which were only needed to supply 1 amp and they can actually be used to draw 2.1 amps comfortably?
    Whilst the 30 pin connectors and usb points are identical, is the internal cable thickness/awg gauge the same?
    Thanks

  • Was there additional content that came with the CS6 Design and Web Premium Download?

    I just downloaded cs6. had to close my safari window while downloading. There were the additional font content etc which I had not downloaded yet. now I can't find where to download. Any help?

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I bought a IPHONE 5s from apple store in united state, the phone came with TMobile SIM and i believe it is unlocked

    I bought a I PHONE 5s from apple store in united state, the phone came with T Mobile SIM and i believe it is unlocked . when I tried to use the device in my country Saudi Arabia one massage appear all the time that the SIM is from unauthenticated carrier or you have to unlocked the device by the local carrier. how can i solve this issue

    StephanieWelk wrote:
    if saudia arabia doesn't support iphone 5s. there is no fix.
    This is not true.
    Why do you think this?

  • My iphone 6 came with numbers, Keynote, Pages, imovie and itunes U and none of them work. Any thoughts?

    My new Iphone6 came with the numbers app and a few others that don't seem to work. When I touch them they open and then close immediately. Am I doing something wrong?

    Hey there wpfarms,
    If I understand correctly some apps seem to minimize on their own as soon as you tap them. I would recommend starting by quitting all the running apps first:
    iOS: Force an app to close
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that restart the phone and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Lion won't operate my app and snow leopard came with my MacBook Pro

    I installed Lion without checking to see if it supported my "can't do without" app.  Now I'm in a panic.  One remedy is to reinstall Snow Leopard, but it came with my new laptop and I don't have any disks.  Is there a solution to that problem?  Is Lion just out of the question, never to be used?  Help! 
    Thanks to all.

    Your new computer came with Snow Leopard installer discs. If you've lost them you can purchase replacements at Apple Store Customer Service at 1-800-676-2775. Or you can purchase a copy of Snow Leopard at any Apple Store for $29.00.
    To reinstall Snow Leopard you will have to first erase the hard drive. I hope that you have backups of your files. If not then be sure to make one before reinstalling Snow Leopard.

Maybe you are looking for