Multi File AudioBook Remember chapter

Hey ok so I've got iTunes 11.4 on my mac. I have a couple of audiobooks a friend gave me in mp3 format. One file for each chapter. Ive gone through set them to be an audiobook and to remember position. However the remember position only seems to work on the individual files and not the whole audio book. Which means I have to remember which chapter I was up to when I go to continue. Is there a way to enable iTunes to remember what position of what chapter (file) the book was up to? Thanks for the help

Listening to audiobook then chapter changed to next
one but it resets my 30gb 5G Ipod. Did the 5R's, no
help. I noticed that the files that don't work are
MPEG-1, Layer 3, but the files that work are MPEG-2,
Layer 3. Could that be it? If so how do I convert?
If I hilite the bad file I don't have the convert to
AAC option available.
ELP!
I have had a previous issue with this problem but recently I tried to play an audio book file but it caused the Ipod to reset but instead of resetting to the main menu it just keeps resetting over and over and no matter if I plug it in to a power supply or a computer it keeps doing the same thing. Has anyone else had this problem and if so has anyone found a fix because I sure as heck don't want to return it.
Thanks
Current generation 80G Ipod Windows XP

Similar Messages

Bug in Multi-File Search and Replace in RH6?

I'm using the 6.0 trial, and one thing I want to be able to
do is to replace the variables I put in using JavaScript with the
new feature variables in 6.0. So, I went in to multi-file search
and replace, and searched for:
<script
language=JavaScript>document.write(varProduct)</script>
I copied this code directly from a topic, and pasted it into
the Search tool.
I don't even care whether I can successfully copy the code
from my new variable for use as the replacement text; I'd be happy
if the multi-file search would simply find all occurrences of my
original code so I don't miss any during conversion to 6.0.
It keeps coming up as not found, and this concerns me
greatly. Has anyone else experienced this? Is it a known bug? Does
anyone have a workaround?
Thanks!

Hi robowriter
I'm assuming you are using the wondrous little applet known
as Multi-File Find and Replace.
Unfortunately, this little beastie is like a cat. It
frequently has a fussy tummy and loves to hork up furballs. Well,
not exactly. Really what it does is fail to properly handle
anything with a line break. So you need a tool that does do this.
Fortunately, one exists! It is called FAR (Find And Replace). Oddly
enough, it was also written by a fellow Microsoft Help MVP named
Rob Chandler. (Rob lives in Australia)
You can download a trial version of FAR from the FAR page.
Click here to visit
the FAR page
Cheers... Rick

Problem with Multi File upload example, help needed

I got the code from the following location.....
http://www.adobe.com/devnet/coldfusion/articles/multifile_upload.html
And I've got it to work to some degree except I cant get the file transfer to work when pressing, Upload.   Below is what my debugger outputs. Any thoughts on how to fix this or even what it means?
At the very bottom of this message is the upload.cfm code.......
Thanks in advance for the help
<html>
<head>
<title>Products - Error</title>
</head>
<body>
<h2>Sorry</h2>
<p>An error occurred when you requested this page.
Please email the Webmaster to report this error.
We will work to correct the problem and apologize
for the inconvenience.</p>
<table border=1>
<tr><td><b>Error Information</b> <br>
Date and time: 12/07/09 22:25:51 <br>
Page: <br>
Remote Address: 67.170.79.241 <br>
HTTP Referer: <br>
Details: ColdFusion cannot determine how to process the tag <CFDOCUMENT>. The tag name may be misspelled.<p>If you are using tags whose names begin with CF but are not ColdFusion tags you should contact Allaire Support. <p>The error occurred while processing an element with a general identifier of (CFDOCUMENT), occupying document position (41:4) to (41:70).<p>The specific sequence of files included or processed is:<code><br><strong>D:\hshome\edejham7\edeweb.com\MultiFileUpload\upload.cfm      </strong></code><br>
<br>
</td></tr></table>
</body>
</html>

<cftry>

    <cffile action="upload"
            filefield="filedata"
            destination="#ExpandPath('\')#MultiFileUpload\uploadedfiles\"
            nameconflict="makeunique"
            accept="application/octet-stream"/>
        
        <cfset acceptedFileExtensions = "jpg,jpeg,gif,png,pdf,flv,txt,doc,rtf"/>
        <cfset filecheck = listFindNoCase(acceptedFileExtensions,File.ServerFileExt)/>

        <cfif filecheck eq false>
            <cffile action="delete" file="#ExpandPath('\')#MultiFileUpload\uploadedfiles\#File.ServerFile#"/>
        </cfif>

        <cfcatch type="any">
            <cfdocument format="PDF" overwrite="yes" filename="errordebug.pdf">
                <cfdump var="#cfcatch#"/>
            </cfdocument>
        </cfcatch>
</cftry>

Just 2 things in my test:
1) I use no accept attribute. Coldfusion is then free to upload any extenstion.
Restricting the type to application/octet-stream may generate errors. Also, it is unnecessary, because we perform a type check anyway.
2) I have used #ExpandPath('.')#\ in place of #ExpandPath('\')#
<cfif isdefined("form.filedata")>
<cftry>
<cffile action="upload"
            filefield="filedata"
            destination="#expandPath('.')#\MultiFileUpload\uploadedfiles\"
            nameconflict="makeunique">
        
        <cfset acceptedFileExtensions = "jpg,jpeg,gif,png,pdf,flv,txt,doc,rtf"/>
        <cfset filecheck = listFindNoCase(acceptedFileExtensions,File.ServerFileExt)/>

        <cfif filecheck eq false>
            <cffile action="delete" file="#ExpandPath('.')#\MultiFileUpload\uploadedfiles\#File.ServerFile#"/>
            <cfoutput>Uploaded file deleted -- unacceptable extension (#ucase(File.ServerFileExt)#)</cfoutput>.<br>
        </cfif>
Upload process done!
        <cfcatch type="any">
            There was an error!
            <cfdocument format="PDF" overwrite="yes" filename="errordebug.pdf">
                <cfdump var="#cfcatch#"/>
            </cfdocument>
        </cfcatch>
</cftry>
<cfelse>
<form method="post" action=<cfoutput>#cgi.script_name#</cfoutput>
        name="uploadForm" enctype="multipart/form-data">
        <input name="filedata" type="file">
        <br>
        <input name="submit" type="submit" value="Upload File">
    </form>
</cfif>

Help required for file to Multi file Blog

Hi,
I'm working with following blog for file to multi file scenario...
"/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
But in Configuration part, I'm unable to find ..TITLE_IDTYPE option for RB_SPLIT.. Screen, there is only two options are available one is Standard and another one is Extended ???!!!
Note : we are using SP16
So, How can I go ahead to complete this scenario ??!!!
Can anybody help me out to complete this file to mulfile scenario without BPM.
Thanks.,
Esha

Hi Esha,
the names seem to have changed since SP14 (the version of this blog entry).
I did a multi-mapping with SP15 once, using "Extended".
Kind regards,
Dennis

ITunes 11 not sorting multi-disc audiobooks by disc number

I just updated to iTunes 11, and for some reason, my multi-disc audiobooks are not being ordered by disc number in the Books view. Instead, it goes track 1 of disc 1, track 1 of disc 2, etc.
The tracks have the disc numbers in their metadata, so why aren't they being sorted that way?
This issue does not occur for music tracks, however. Puzzling, eh?
Message was edited by: Jawshooah

This worked perfectly for me. Thank you Giacomo!
P.S. I also used PayPal to give DougScripts a $5 thank you.
Giacomo Italy
Re: iTunes 11 not sorting multi-disc audiobooks by disc number
Dec 10, 2012 2:17 AM (in response to Jawshooah)
Guys, I have the ultimate solution!
Use the following Applescript:
Embed Disc Number in Track Number v1.0
Applies selected tracks' disc number as hundreds digit in track number
Short link: http://dougscripts.com/461
date posted: July 14, 2009 - total downloads 926
you can find it at:
http://dougscripts.com/itunes/
It is a reversible operation by definition!
Cheers!

Multi-file placing order

Whenever I load a couple of images from Bridge to use them with the new multi-file placing 'tool', I never get them in the order they are in Bridge. Is there any way to solve this, so I don't have to flip through all the images (which, unfortunately, goes really slow on my computer) but can just place them without sorting through them first?

Yes, I do mean using the arrow keys. The images are already in the right position when they are in Bridge, so that is really the thing. I thought this new thing would be a time-saver, but everything I have to do extra kind of erases the plus side of it...
Putting them on the pasteboard first isn't any quicker than just importing the images one by one I guess... Anyway, thanks for the effort and if you come up with another solution I'd be happy to hear it!
Claudia

Automating multi-file Flash using XML file "run list"

I've created a multi-file interactive Flash "demo" for a client. It's very much like a website (though he's not using it as a website) in the way that it is laid out in that there is a main index page which can then direct you to different product categories, which you can click on to see. Each "page" contains product (or product category) information, photos, block diagrams, etc. There is nothing animated in the Flash.
My client also wants to be able to set it up so that the demo runs automatically from a configurable XML file. My ActionScript skills are pretty limited, but I've been able to using ActionScript 3 to load and read the XML file. Using a 'for' loop, I am able to read the XML file and return the path of each Flash file and the duration that each file should be displayed (my client requested that he be able to configure the duration of each page as well).
I've set up a loader for each movie clip and a timer for the display duration. Unfortunately, the thing that is throwing me off is that when I attempt to load the movie clip (as the last item in the for loop), it reads the entire XML file, returns all of the clips and durations (I'm using trace to see this) before it loads the movie clip. As a result, the only movie clip that is loaded is the last one read from the XML file.
As I said, I'm not very good at ActionScript, so everything that I've managed to cobble together has been from internet tutorials.
This is my code:
var xmlLoader:URLLoader = new URLLoader();
xmlLoader.addEventListener(Event.COMPLETE, xmlLoaded);
var mcLoader:Loader = new Loader();
mcLoader.contentLoaderInfo.addEventListener(Event.INIT, playClip);
var mcCurrent:MovieClip = new MovieClip();
stage.addChild(mcCurrent);
var xml:XML;
function playClip(e:Event):void
    trace("Function:playClip");
    stage.removeChild(mcCurrent);
    mcCurrent = MovieClip(mcLoader.content);
    mcLoader.unload();
    stage.addChild(mcCurrent);
function xmlLoaded(e:Event):void
    trace("Function: xmlLoaded");
    xml = new XML(e.target.data);
    var cl:XMLList = xml.clip;
    for(var i:uint=0; i<cl.length(); i++)
        trace("Begin 'for' loop");
        trace("variable 'i' is" + i);
        var clipPath = cl[i].@path;
        var delay = cl[i].@duration;
        trace("Clip path is " + clipPath);
        trace("Display for " + delay);
        mcLoader.load(new URLRequest(clipPath));
xmlLoader.load(new URLRequest("filerunlist.xml"));
I removed the timer event because it, like everything else was getting repeated before anything got loaded, so I wanted to figure out out to get the clip loader (mcLoader) to load the movie clip for each file before I figured out where to put the time to ensure that each clip is displayed for the appropriate duration. I suspect that the timer event needs to occur in the 'playClip' function, but would take advice on that as well.
Thanks to anyone that can help me figure this out.

What you need to do in the xml parsing function is to simply store all of the data into an array. You will then use that array one element after another via whatever timer control you set up, accessing each file in the order they are stored in the array. You will not do any loading in that function, just data storage, and when you are done, the last line in that function, outside of the loop, will trigger whatever function you have that will start processing the first item in the array.
Example, storing data objects in the array...
var clipData:Array = new Array();   // store your xml data here
var clipToShow:uint = 0;                   // use this later in the showClip function
function xmlLoaded(e:Event):void
    trace("Function: xmlLoaded");
    xml = new XML(e.target.data);
    var cl:XMLList = xml.clip;
    for(var i:uint=0; i<cl.length(); i++)
        clipArray.push( { clipPath: cl[i].@path, delay: cl[i].@duration } );
    showClip();
function showClip(){
     // do whatever to process loading clipArray[clipToShow].clipPath
     // and using clipArray[clipToShow].delay for starting whatever timer is involved
     // the timer event handler function will call this function when it is executed
     clipToShow += 1;   // increment the counter for the next clip in line
If you are not comfortable/familiar with the object approach, then you could also store the clip and delay data in two separate arrays.

RFC to multi file scenario

Hi,
I have to carry out a RFC to multi-file scenario. The requirement is that Error generating on whatever part XI will handle have to be reported. Is this possible in this scenario? What can be the mechanism?
I want to report these errors via a mail to an e-mail id.
Since i haven't done this scenario, i would appreciate if some link for carrying this out step-by-step is given.Also tell me what configuration for receiving RFC has to be done on XI and R/3.

Hi Arpit
<b>go through these blogs for the querry</b>
<b>For email alerts</b>
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
You have to do SMTP Configuration for EMail and SMS.....
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
Thanks !!

Requirements for file to multi file scenario

Hi,
Please tell me what are the System Requirements(of XI System) for running of file to multi-file scenarios.
Also are there more requirements for some other similar scanarios.

refer this blog
/people/sravya.talanki2/blog/2005/08/16/configuring-generic-sender-file-cc-adapter
1. If u want to split the file coming from the sender, the u will have to use multi-mapping.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
2. If u want to send the same file to all the receivers then it would be better to go for configuring multiple receivers in the same receiver determination step.
Questions are welcome here!!
<b>Also mark helpful answers by rewarding points </b>
Thanks,
Abhishek Agrahari

How to read multi files?

Hi !! Can anyone tell me the syntax of reading mulit txt files? Thanks. I only know how to read single file.
try
//Search file
System.out.println(" ");
System.out.println("Search file :");
File file = null;
String fileloc = "c:\\j2sdk1.4.1_06\\bin\\PAYMENT.TXT";
file = new File(fileloc);
//If Payment interface file exists
if (file.exists()) {
System.out.println("File exists !");
System.out.println("");
}

Hi!! How to read multi files (For example: dbExport1.txt , dbExport2.txt , dbExport3.txt ...... => dbExport*.txt) ?
I only know how to read a single file.
try
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     conn = DriverManager.getConnection(url, userid, password);
stmt = conn.createStatement();
     if (conn != null)
     System.out.println("Connection to Database OK!");
// read it
BufferedReader br = new BufferedReader(new FileReader("c:\\document\\dbExport.txt"));
DataInputStream in = new DataInputStream(new FileInputStream("c:\\document\\dbExport.txt"));
String input;
String firstinput;
String secondinput;
int count=130;
int year=1955;
while ((input = br.readLine()) != null) {
firstinput = input.substring(0, 10);
secondinput = input.substring(10);
count = count + 1;
System.out.println(firstinput);
System.out.println(secondinput);
String insertStore1 = ("INSERT INTO AUTHORS " +
"VALUES ('" + count + "', '" + firstinput + "', '" + secondinput + "', 1955)");
     System.out.println(insertStore1);
boolean result;
if (stmt.executeUpdate(insertStore1) == 1){
System.out.println("Insertion successful");
else{
System.out.println("Insertion failed");
br.close();
     stmt.close();
     conn.close();
}

For some reason FCP is now making multi files when I capture called -av

For some reason FCP is now making multi files when I capture called -av
I capture one clip but I get 7 files.
sineparade live-1-av 1.91 GB
sineparade live-2-av 1.91 GB
sineparade live-3-av 1.91 GB
sineparade live-4-av 1.91 GB
sineparade live-5-av 1.91 GB
sineparade live-6-av 334.1 MB
sineparade live-av 1.91 GB
I don't know why this started in recent captures but it is eating up disk space as it is 7 times larger than it needs to be and only the last one works.

Is there a way to get these files to be joined together into one file easily. I capture on a FAT32 hard drive but then transfer the files onto my edit machine and would prefer to keep everything archived there as a single file.
Any programs or scripts that I can use. I have figured out that you can open each file in Quicktime and then save as a self contained file, but I was wondering if there is a better way.

How to upload multi files in struts

Hi all,
plz show me how to upload multi files in struts ... :(
thank in advance.
bowlkhin

[help link 1|http://www.roseindia.net/struts/strutsfileuploadandsave.shtml]
[help link 2|http://www.roseindia.net/struts/strutsfileupload.shtml]

Join Multi-disc Audiobooks

Hello
How do I get multi disc audiobooks (that are already imported) to show up in itunes 11 as one book as opposed to multiple books (ie book had 10 CDs now I have 10 books). It is a hassle to sort through the books and also hard to figure out on my iphone which book is next. I have tried setting it as a compliation but that didn't do anything.

I think I just figured it out. For anyone else who had this same question this is what I did:
Selected all of the books.
Get Info
Put the book's title in the album and the grouping box.
Go to the options tab and select that it is part of a compliation.
I'll start listening to one of the audiobooks that I did this for tomorrow. Hopefully I didn't mess it up.

Multi File Find and Replace FAR missing from tools

I have RoboHelp x5.0.2 and I have always used Find and
Replace at my previous employer. I have started with a new company
and the RoboHelp FAR is missing from Tools. I know you can Add a
tool if you know the path, but I have no idea where to look.
Some background:
We use Source Safe (VSS) to check our files in and out.
I have verified that all of the files are NOT read-only.
HELP!!!!

Maybe you are mixing up something. RoboHelp includes a tool
named Multi-File Find and Replace. This should indeed be situated
on the Tools pane.
There exists a tool called FAR, which, among other things,
offers a similar functionality. FAR is shareware and
not included in RoboHelp.
Greetings
---Dirk Bock

Can't upload multi file in ovi share

Hello, why I can't find the button to upload multi file in ovi share now? Help me, please!

Today i had the same problem, i've tried Firefox, Explorer and Chrome without solution.
At the moment, the only way is to use Nokia Ovi Suite.

Multi File AudioBook Remember chapter

Similar Messages

Maybe you are looking for