Requirements for file to multi file scenario

Hi,
Please tell me what are the System Requirements(of XI System) for running of file to multi-file scenarios.
Also are there more requirements for some other similar scanarios.

refer this blog
/people/sravya.talanki2/blog/2005/08/16/configuring-generic-sender-file-cc-adapter
1. If u want to split the file coming from the sender, the u will have to use multi-mapping.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
2. If u want to send the same file to all the receivers then it would be better to go for configuring multiple receivers in the same receiver determination step.
Questions are welcome here!!
Also mark helpful answers by rewarding points 
Thanks,
Abhishek Agrahari

Similar Messages

Help required for file to Multi file Blog

Hi,
I'm working with following blog for file to multi file scenario...
"/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
But in Configuration part, I'm unable to find ..TITLE_IDTYPE option for RB_SPLIT.. Screen, there is only two options are available one is Standard and another one is Extended ???!!!
Note : we are using SP16
So, How can I go ahead to complete this scenario ??!!!
Can anybody help me out to complete this file to mulfile scenario without BPM.
Thanks.,
Esha

Hi Esha,
the names seem to have changed since SP14 (the version of this blog entry).
I did a multi-mapping with SP15 once, using "Extended".
Kind regards,
Dennis

SCOM license required for monitoring a NetApp filer?

Is a SCOM ML required for monitoring a NetApp filer? I am considering the NetApp onCommand MP and wondering if additional SCOM licenses are required.

Hi,
Based on my research, there is no such licenses.
For more information, please review the link below:
System Center 2012 R2
Licensing Datasheet
As this is a licensing related query, please call 1-800-426-9400 (select option 4), Monday through Friday, 6:00 A.M. to 5:30 P.M. (PST) to speak directly to a Microsoft licensing
specialist. You can also visit Microsoft Volume Licensing Site http://www.microsoft.com/licensing/ to find the contact information.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Help required for slicing and merging file

Hi,
I am working on p2p downloading application based on Gnutella. Right now i am trying to implement downlaoding one file from many hosts at a time(like limewire does). i am able to connect to multiple host. but dont know how to downlaod and merge file for his purpose.
i know how to download one file from single host. but dont know how to handle file coming from multiple hosts.
if anyone having knowledge, please tell as soon as possble.

Hi.
thanks for the reply. Actually i had something same
in my mind. but unfortunately i am quite week in
serializtion and file stuff. If you could provide me
with code snipet for this, or can just simulate in a
fewer lines of code, it would be a great help for
me...i have too much short time...
i think i really have to study this file
stuff..........You shouldn't use serialization. Just invent a protocol, and "normal" binary data.
Kaj

Configurations required for sender/ reciever mail adapter scenario...

Hi,
I have to work on few mail scenario's i.e, sender and reciever.
Please let me know what all configurations are required in XI server to make the system ready to send and recieve mail like SMTP configurations...
Thanks..

Hi,
how to use mail adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
XI: Dynamic name in the mail attachment - pseudo "variable substitution"
The specified item was not found.
XI: Sender mail adapter - PayloadSwapBean - Step by step
The specified item was not found.
XI: HTML e-mails from the receiver mail adapter ?
The specified item was not found.
Mail Adapter (XI) - how to implement dynamic mail address
The specified item was not found.
S/MIME Security for the MAIL-Adapter within XI
S/MIME Security for the MAIL-Adapter within XI
Configuring sender mail adapter
http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/frameset.htm
Thanks,
Madhu
Edited by: Madhu sudhan Reddy on Jul 18, 2008 7:54 AM

Split database file into multi files on different drives.

Hi,
I Have a large database file .mdf that eating my drive disk space. So i have installed another disk. Now I have 2 drives (other than OS drive) one has the .mdf file and almost full and the new drive which is empty.
I need to know How to split the .mdf into another file located on the new drive and keeping the original .mdf file not growing anymore ?

I know how to split an access file, but never done this with MDF, so if you know what connection string, then you should be able to change this code. However this will ask the user for location of file to be split, it will split in same folder then you can
move the splits to another folder.
This will allow you to choose how many records you want to split by, You can ignore the watchfolder part, or you can use that to automatically copy the split files, then add a delete from orginal source.
Anyway here is the code and I hope it can help with MDF files.
Imports Microsoft.VisualBasic, System, System.Diagnostics, System.IO, System.Windows.Forms
Imports System.Data.OleDb, System.Data, System.Data.SqlClient, System.Data.Odbc, System.Threading
Imports Microsoft.Office.Interop, System.Runtime.InteropServices, Microsoft.Office.Interop.Outlook
Public Class Form1
Dim sConStr As String = "Provider=Microsoft.ACE.OLEDB.12.0;Data Source="
Dim aConStr, CurPr, WFolder, VFolder, SFolder, ZFolder, eFile, tFile, FileName As String
Dim TableName, aConStr2, II, IV As String
Dim Recs, Maxd, i, StartRec, EndRec, TRec, iii As Integer
Dim Parts As Decimal
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Split_Recs.Click
WFolder = txtBxPath.Text + "\"
FileName = txtBxAccess.Text
TableName = txtBxTable.Text
aConStr = WFolder + FileName
Recs = txtBxTotRecs.Text
Maxd = txtBxMax.Text
Parts = Recs / Maxd
i = 0
StartRec = i
EndRec = Maxd
Do While i < Parts
Dim FirstRec As String = StartRec + 1
Dim LastRec As String = EndRec
Dim TotRec As String = EndRec
TRec = EndRec - StartRec
TotRec = TRec
II = i + 1
IO.File.Copy("\\pw_prod\Watch_Input\Glenn-PTZ\db1.mdb", WFolder + txtBxJobNum.Text + "Pt_" + II + ".mdb")
TextBox3.AppendText(" Between " + FirstRec + " and " + LastRec + vbCrLf)
txtBxProgress.AppendText("Part: " + II + " Start " + FirstRec + " End " + LastRec + " Total: " + TotRec + vbCrLf)
TextBox5.Text = " Between " + FirstRec + " and " + LastRec
StartRec = StartRec + Maxd
EndRec = EndRec + Maxd
'Creates Queries in Main File
Dim con As OleDbConnection = New OleDbConnection(sConStr + aConStr)
Dim cmd As OleDbCommand = New OleDbCommand("CREATE PROC Variable" + II + " AS SELECT * FROM " + TableName + " where " + txtBxSort.Text + TextBox5.Text + " Order by " + txtBxSort.Text, con)
con.Open()
cmd.ExecuteNonQuery()
con.Close()
'Export each new query as new access file
Dim DevComm1Conn_1 As New System.Data.OleDb.OleDbConnection(sConStr + WFolder + txtBxJobNum.Text + "Pt_" + II + ".mdb")
DevComm1Conn_1.Open()
Dim DevComm1 As New System.Data.OleDb.OleDbCommand( _
"SELECT * INTO [Variable" + II + "] FROM [MS Access;DATABASE=" + WFolder + FileName + ";].Variable" + II, DevComm1Conn_1)
DevComm1.ExecuteNonQuery()
DevComm1Conn_1.Close()
i = i + 1
IV = i - 1
If IV = 0 Then
IV = 1
End If
If EndRec > Recs Then
EndRec = Recs
End If
TextBox5.Text = String.Empty
If txtBxWatchCopy.Text = "Yes" Then
IO.File.Copy(WFolder + txtBxJobNum.Text + "Pt_" + II + ".mdb", txtBxWatch.Text + "\" + txtBxJobNum.Text + "Pt_" + II + ".mdb")
End If
Do While IO.File.Exists(txtBxWatch.Text + "\" + txtBxJobNum.Text + "Pt_" + II + ".mdb")
Threading.Thread.Sleep(50)
Loop
Loop
txtBxProgress.AppendText("Total Parts: " + II + vbCrLf)
MsgBox("Match all counts to ticket. If not match talk to CSR")
End Sub
End Class

This morning I ask about the requirement to download the adobe Cs6 before i buy the product and the salesperson told me that i met the requirement for that particular software, so my surprise now when i open the file it says an error because my computer d

this morning I ask to a sales person about the requirement to download the adobe Creative Cs6 before i buy the product and the salesperson told me that my computer met the requirement for that particular software, so my surprise now when i open the file it says an error because my computer doesn't meet this requirement, my computer is a OS X 10.5.8 and the requirement is OS X v10.6.8 or v10.7 what can i do?

The requirements are online. For the Master Collection the requirements on Macs are:
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8 or v10.7
4GB of RAM (8GB recommended)
15.5GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash-based storage devices)
Additional disk space required for disk cache, preview files, and other working files; 10GB recommended
1280×900 display with 16-bit color and 512MB of VRAM; 1680×1050 display required and second professionally calibrated viewing display recommended for Speedgrade
OpenGL 2.0-capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
Java™ Runtime Environment 1.6
Eclipse™ 3.7 Cocoa version (for plug-in installation of Flash Builder); the following distributions are supported: Eclipse IDE for Java EE and Java Developers, Eclipse Classic, Eclipse for PHP Developers
QuickTime 7.6.6 software required for QuickTime features, multimedia, and HTML5 media playbackOptional: Adobe-certified GPU card for GPU-accelerated performance in Premiere Pro; see the latest list of supported cards
Optional: Adobe-certified GPU card for GPU-accelerated ray-traced 3D renderer in After Effects; see the latest list of supported cards
Optional: Tangent CP200 family or Tangent Wave control surface for Speedgrade
Optional: 7200 RPM or faster hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended) for video products
Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.* Phone activation is not available.
You should have been given the correct information. Adobe offers 30-day money back guarantee.
You can find return information here:
Return, cancel, or exchange an Adobe order

EPA file import jar file

Hi all,
Does someone have the jar file required for importing an EPA file?
Where can I find the API com.sapportals.portal.transport.ui.*?
Any help will definitely be rewarded.
Thanks & Regards,
M.Subathra

Hi Subathra,
Please refer the thread
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=128785">https://www.sdn.sap.com/irj/sdn/thread?threadID=128785</a>
Same problem is discussed here..
Hope this helps...
Regards,
Sharadha

RFC to multi file scenario

Hi,
I have to carry out a RFC to multi-file scenario. The requirement is that Error generating on whatever part XI will handle have to be reported. Is this possible in this scenario? What can be the mechanism?
I want to report these errors via a mail to an e-mail id.
Since i haven't done this scenario, i would appreciate if some link for carrying this out step-by-step is given.Also tell me what configuration for receiving RFC has to be done on XI and R/3.

Hi Arpit
go through these blogs for the querry
For email alerts
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
You have to do SMTP Configuration for EMail and SMS.....
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
Thanks !!

Error: the cabinet file required for this installation is corrupt and cannot be used.

Hi, ive recently just built a brand new computer and purchased windows 7 64 bit. the system runs fine except for the fact that i cannot install any games (these include command and conquer 4, red alert 3 and sims 3. i go to install and partway through it stops with a message saying:
"the cabinet file 'name.cab' required for this installation is corrupt and cannot be used. this could indicate a network error, an error reading from the CD ROM, or a problem with this package."
At first i suspectd a faulty cd rom drive, but the same thing happend wen i tried it with another drive. i know the disks are fine because theyr new. iv searced online and tried things such as disabling the antivirus, going into command prompt and deleting the .....\SQMClient\DisabledSessions as administrator and anything else that was recommended, but it still cant seem to like cabinet files (btw when the installation stops it doesnt always stop on the same .cab as a previous attempt, sometimes it gets further through the installation than others). they install fine on other computes with windows 7 64bit.
Any help is appreciated! Thanx

Hi Dazattack, I suggest you check the following KB article first:
Error message during Office 2000 or Office XP installation: "Error 1335 - Cannot Copy Cab File Office1.cab"
http://support.microsoft.com/kb/314810
Note: Though it's for Office, some steps in the article can still be used in such scenario.
Meanwhile, can you install other applications that downloaded from the Internet ?
Sean Zhu - MSFT

Configuration required for attached for a file in a PO in ECC 6.0

Hi All,
1) Is any configuration/setting required for attaching a file in a PO/PR ECC 6.0.
2) How we can mail /send that file, is any enhancement required
Kunwar

Hi,
In One ID for any PO ,when go sytem in toolbar --> sevices for object,I am getting the services for object and showing the attachment ,but in another ID with same server ,computer ,it is showing "No services avaiable"
please guide any configuration/ setting missing?
Kunwar

Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code

I get this message when I check the Device manager for my Ipod
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipod

I reinstalled Itunes a couple of times. I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems. I have a yellow causion lite when I look at the USB-port with the phone connected. All other devices work without a problem.

How many Communication Channels required for File--Bpm(SAP R/3)--File

Hi
 Pl..help me on this
 I am doing the following scenario File 2BPM 2 File
 i.e File -
BPM(ASync)
 BPM -
SAP R/3(Sync)
 SAP R/3 ---BPM (Sync)
 BPM ---File (Async)
 For me it looks three CC's but still i am not confident
 Can any one explain me on this
Adv thanx
Prasad K

File(CommChannel 1 -File Sender) -
> BPM(ASync)
BPM -
> SAP R/3(Sync) (CommChannel 2 - RFC Receiver)
SAP R/3(Comm Channel 3 -RFC Sender) --- > BPM (Sync)
BPM ---> File (Async)(CommChannel 4 - File Receiver)
So a TOTAL of 4 Comm Channels.
Since Sinchronous so 4 channels .. if you use idoc adapter instead of RFC 3 channels will do
Cheers,
Himadri
null

ERROR: The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used

As the title indicates, I'm having this error during installation. It occurs when I try to install
the "Management Studio" part of the program. I've tried a bunch of things like
copying to hard drive and installing, but to no avail. To isolate the problem, i've even tried removing Reporting services, since at the time of failure it seems to be trying to install/configure the Microsoft.Reporting Services dll.
Additionally, I have SQL Express installed (installed it separately, not as part of the SQL 2005 DVD), VS 2005, .NET Framework 2.0, SQL Management Studio Express CTP. Could the Management Studio Express be causing a problem?
Please note:
Although the error is about missing / corrupt Sql.cab, I have searched the entire dvd for the said file, but there is no file called Sql.cab on the dvd. Am I missing something?
Any solution would be greatly appreciated.
TIA

I was installing SQLServer2014_Developer which I had just purchased as a 64bit iso download to VirtualBox Windows_10_64bit Instance that i had just created.
I got the following error about 90% through the SQLServer2014_Developer install:
>>> ===================================================================
>>> SQL Server 2014
>>> ===================================================================
>>> TITLE: Microsoft SQL Server 2014 Setup
>>> ------------------------------
>>> The following error has occurred:
>>> The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used.
>>> This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
>>> For help, click:
>>> h t t p ://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xDF039760%25401201%25401
>>> ------------------------------
A quick rerun of failed SQLServer2014_Developer install just for the Management_Tools and review of the SQLServer2014_Developer install logs
confirmed error still prelevant:
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\...
>>> ...
>>> Detailed results:
>>>   Feature:                       Management Tools - Complete
>>>   Status:                        Failed: see logs for details
>>>   Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
>>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
>>>   Component name:                SQL Server Management Services
>>>   Component error code:          1335
>>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
>>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
from the CD-ROM, or a problem with this package.
>>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
>>>
>>>   Feature:                       Management Tools - Basic
>>>   Status:                        Failed: see logs for details
>>>   Reason for failure:            An error occurred during the setup process of the feature.
>>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
>>>   Component name:                SQL Server Management Services
>>>   Component error code:          1335
>>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
>>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
from the CD-ROM, or a problem with this package.
>>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
>>> ...
Reading though the many Google hits going way back AD-2000/AD-2006/AD-2011/AD-2014 for various installs including SQLserver_2008/2012 etc
I noted that in the main there were x2 common themes.
1. Problem with corruption the original download.
--- Although I had not run the download checksum
--- I had previously just installed SQLServer2014_Developer successfully, so at the minute, I was confident downloads were ok.
--- Many hits mentioned this 'Sql.cab' file and 90% of the install had been successfull -
--- I figured the chances of us all having corruption of this one files were agaianst the odds and
---   probably re-downloading it would not fix this - but I kicked a re-download off anyhow .
While it was running ...
2. Network issue when installing - some of the hits asked if could be related to Virtual drives.
--- This struck a chord
--- I had downloaded the SQLServer2014 .iso to my host PC and then copied it onto one OneDrive so I could access it within the VirtualBox_Windows_10.
--- From within the VirtualBox_Windows_10 I had then used SetupVirtualCloneDrive5450.exe to mount the OneDrive SQLServer2014 .iso and then autorun the install.
What worked for me ...
--- I decided to
--- 1. Copy the same SQLServer2014 .iso that had failed to install x2 from OneDrive to the c:\ root of the VirtualBox_Windows_10.
--- 2. Remount the same SQLServer2014 .iso from c:\ again using SetupVirtualCloneDrive5450.exe.
--- 3. Re-run the SQLServer2014 install using the repair mode.
This time the [Maintenance] [Repair] install completed with all elements showing installed successfully.
Hope this helps
Andy

Help Required on File to Mail Adapter scenario

Hi all,
Can someone give me some links or material regarding the step by step procedure to configure a file to mail adapter scenario (including the design and configuration). I have already gone through help.sap.com, but I need more clarification. So please guide me accordingly
Regards
V.Kartik

Hi Karthik,
     Also check these links on File to Mail adapter scenario:
    Blogs:
    /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
    /people/sap.user72/blog/2005/06/08/sending-attachments-in-mails
    Sap File on Mail Adapter:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
    Also check these similar threads:
    How to implement file to mail scenario
    What is the process for sending file thru email using Mail Adapter ???
Regards,
Subhasha Ranjan

Requirements for file to multi file scenario

Similar Messages

Maybe you are looking for