Multi panel report

I have created a report which has 2 verticals panels an some repeating frames. My problem is, depending the number of records on the repeating frames, the text at the end of the first pages is splitting into 2 pages (half in one page and half in another). Is there a way to move the text to the next page if it cannot be printed on the previous page?. I have tried page protect which is of no use.

Could be an anchor problem. I have seen splitting pages with the use of anchors when attached to repeating frames. Also, I am assuming all your frames are variable elasticity.
I would try removing all anchors in the report. If nothing else, it will eliminate them as the potential culprit. At a minimum, remove any attached to the repeating frames.
Good luck...

Similar Messages

Multi-panel report with repetition frame

Hi all,
I have a multi-panel report with three vertical panels. In this panels I have one repetition frame inside another repetition frame. My problem is when I run the report the content of the registers appears splitted between pages. I have tried 'Page Protection' on the enclosing frame and the content doesn´t not move to next page. Can anyone help me to solve this problem?
Thanks in advance.

Could be an anchor problem. I have seen splitting pages with the use of anchors when attached to repeating frames. Also, I am assuming all your frames are variable elasticity.
I would try removing all anchors in the report. If nothing else, it will eliminate them as the potential culprit. At a minimum, remove any attached to the repeating frames.
Good luck...

Use of project view to group project records in multi-project report

I have a summary level multi-project report to report summary level information for active projects. We are using project view to organize our projects between departments and divisions (hierarchical structure) - represented by folders in project view. Projects are occasionally moved between project folders. If anyone has experience with report development using folder structure? My intent is to create grouping band based on folder structure and list projects under appropriate folder/band.
Any assistance is greatly appreciated.
I am using CM14.1 with OBIP 10.1.1.7
Thanks,
Prath

If you are creating a standard multi-project report (no retrieval criteria; project_state=0) and you run this report from within PCM, PCM automatically appends to your syntax the filtering criteria for the "folder" the user has highlighted in the project tree. In this case you would have one report that would retrieve multiple sets of data actively depending upon the project tree position. I have seen sometimes this causing issues with certain base syntax, but in general this should work.
Sounds, though, like you're building your report to call to the raw project_view tables, and Rick pointed out you need to use both of these tables then most likely.

XML Publisher Multi tab Report: Help needed

Hi,
I have a requirement like below--
Need to develop master detail XML Report in R12. O/P will be in excel.
Excel output having two Work sheet.
Some columns data must be non editable in excel output ,whereas some columns will be editable.
User must not be able to add any line manually in the report.
Can anyone pls help me out to find a way to build this?????????
Thanks
Titas

Hi Titas,
Any luck with this? Were you able to create a multi-tab report using XML Publisher? Any help on this will be greatly appreciated.
Thanks.

How to create multi level reports?

The report I have created contains 25 columns and is to wide. I would like to create a multi level report in the fashion of below:
Col 1 Col 2 Col 3
Row1 Row1 Row1
Row2 Row2 Row2
Col 5 Col 6 Col 7
Row1 Row1 Row1
Row2 Row2 Row2
I am assuming this needs to be done by modifying html in a template.
I have cut up a normal report to try and illistrate what I am thinking.
http://i71.photobucket.com/albums/i124/breinhar/multirow.jpg
I greatly appreciate the help. Thanks.

Hi,
OK - I've put together a horizontal scrolling report template for a Theme 12/Standard report: [http://apex.oracle.com/pls/otn/f?p=33642:198]
To create this, you need to:
1 - Through Shared Components, Templates - create a new Report Template based on a copy of the existing Standard report template.
2 - When you have your new template, edit it.
3 - In the template's "Before Rows" setting, replace what's there with the following:
<style type="text/css">
#table1 th {white-space: nowrap}
#table1 td {white-space: nowrap}
#table2 th {white-space: nowrap}
#table2 td {white-space: nowrap}
</style>
<table cellpadding="0" cellspacing="0" summary="" style="padding:0px; border-collapse:collapse;">#TOP_PAGINATION#
<tr><td>
<tr>
    <td style="vertical-align:top; background-color:#EFEFEF; padding:0px; border:1px solid darkgray;">
      <div id="d1" style="background-color:white; margin:0px; border:0px; padding:0px;">
      </div>
    </td>
    <td style="vertical-align:top; padding:0px; border:1px solid darkgray;">
      <div id="d2" style="overflow-X:scroll; margin:0px; border:0px; padding:0px; border-right:1px solid darkgray;">
<table cellpadding="0" border="0" cellspacing="0" summary="" class="t12Standard" id="table2">4 - In the template's "After Rows" setting, replace what's there with the following:
      </div>
    </td>
</tr>
</table><div class="t12bottom">#EXTERNAL_LINK##CSV_LINK#</div></td></tr>#PAGINATION#</table>
<script type="text/javascript">
var d1 = document.getElementById("d1");
var t2 = document.getElementById("table2");
var t1 = t2.cloneNode(false);
t1.style.width = "100%";
t1.id = "table1";
d1.appendChild(t1);
var t2Rows = t2.rows;
var k;
var r;
var c;
for (k = 0; k < t2Rows.length; k++)
r = document.createElement("TR");
t1.appendChild(r);
c = t2Rows[k].cells[0].cloneNode(true);
r.appendChild(c);
t2Rows[k].deleteCell(0);
d1.innerHTML += "";
</script>5 - On your report's Report Attributes, change the template used for the report from "Standard" to your new one
6 - Also on the report's Report Attributes, set "Enable Partial Page Refresh" to No - this is required as we need the javascript in the template to be run whenever pagination happens and Partial Page Refresh does not seem to allow us the means to trigger javascript
7 - Finally, on the report region's Region Footer, add in:
<style type="text/css">
#d1 {width:75px;}
#d2 {width:500px;}
</style>#d1 refers to the width of the frozen column and #d2 is the width of the rest of the report - you can adjust these figures as required.
The template contains two DIV tags - d1 and d2. Initially, d1 is empty and d2 contains the report. The javascript moves the first cell in each row from d2 to d1. The styles then add the scrolling functionality.
Andy

Multi-query reports in Reports 3.0

When I run multi-query report in Reports 3.0 the report runs
correctly when I first load the report. However, when the report
is run for a second time the sub-queries do not appear to execute
and the report does not give a complete output, if any.
null

Hello Mike,
Whenever you work on multi-query reports you have to set all
the relationship within the tables. If you have not specified
then specify within the where clause.
Try this. I hop your problems get solved.
From Subash.
Mike Donnerstag (guest) wrote:
: When I run multi-query report in Reports 3.0 the report runs
: correctly when I first load the report. However, when the
report
: is run for a second time the sub-queries do not appear to
execute
: and the report does not give a complete output, if any.
null

Multi-Language report in XML Publisher(Its is urgent, Please help)

Hi All,
I am working on Multi-Language report. We have installed just 3 languages (English, Japaneese, Spanish) but my requirement is to display the reports in few more un-installed languages like Korea, chineese etc. I tought of doing the lables (all hard coded fields) to translate using .XLIFF file. When i try to run the report, in language settings (this is the place where the XML report takes the language input)i can see only those languages which are installed. How can pass other languages (un-installed) as a parameter in the XML report?
Please suggest. It is very urgent.
Thanks,
AS

for this functionality, i had to write a custom package to submit the request for that particualr language and set the language while setting the parameters .
Thanks.

How to Design Multi Page Report in SSRS 2008

Hi All,
I have managed to create a multi page report. When I am preview mode i can see that the report has 2 pages.
But when I am in design view I cannot view the second page. How can I view the second page. Reason being I am trying to create a template where the table for certain data needs to be at the top of the page and some data at the middle and so on.
Thanks in advance.
Aash.
Aash

Hi Aash2,
According to your description, the behavior of cannot view the second page in design view is expected, in another way, there is only one page in design view.
Report Designer supports two views: Design to define the report data and report layout, and
Preview to display a rendered view of the report. If you would like to show a table on the first page, and show the other table on the second page, you can add a page break on the first table like followings:
1. Click the gray handle in the first table, select “Tablix Properties”
2. Click “Add a page break after” check box under Page break options in General Tab
After do above, you can see the first table in the first page, and the other table in the second page.
For more details about report designer, please see the following article,
Working with Report Designer in Business Intelligence Development Studio:
http://msdn.microsoft.com/en-us/library/cc281300(v=sql.110).aspx
If you have any question, please feel free to ask.
Thanks,
Eileen

Multi Column Report - printing Across and then Down

Is there any setup option for a multi column report to go across and then down instead of down & across as a default. The problem I am experiencing is that some where and some how the two columns are not horizontally aligned properly - neither in the
report view nor in the exported PDF.
The added difficulty is the problems created by this misaligned labels while printing on a custom paper that is smaller in size. Though I can setup the custom dimensions and get the desired 4x2 labels on the screen the printing doesn't sit in proper places
on a preformatted paper.
Is there any solution(s). Thanks in advance.

Hi Christal,
Based on my understanding, you want to make multi columns go across then down in the report.
For your requirement, on query level, we should add an additional field(DisplayColumn) in the dataset, the field indicates the column in which the corresponding records will display. When designing a report, we add a group in the report, then insert some
tablixes into the detail row. Within the nested tablix, we specify filter expression based on the value of DisplayColumn field. So that we can decide which data should display on which column. When previewing the report, you can find the report displays like
newsletter-style. Besides, if we design the report like this, the report can supports all renders. For detail information about how to design the report step by step, please refer to this article:
Creating Multiple-Column Reports [SSRS] .
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Select_list_from_lov in multi row report: Help

Oracle 10g, apex 3.2
On windows XP client, Firefox 3.5.2
I have a multi row editable report region, defined as below: I have a check box item for the row being selected and one of the columns in the row is a select_list_from_lov_xl. Once the user checks a particular row, using the check box, he/she will choose a particular value from that row's select list. How do I capture the value of the select_list returned value specific for that row? As you see from the highlighted code to render select_list,the value for the apex_item that I am assigning is 30. But when I look in the firebug->inspect element, the apex renders the name as 'f01'..??. What am I missing here??
Also if user checks all rows, my code picks up the correct corresponding values picked for the select list. If user selects a row in the middle or any random row, the value selected is always the first item returned by the first orw's select_list (though this was not checked!!)
I am confused and need help on capturing select list return values in a multi row reports.
Thanks for all your time and expertise...
Here's the simplified version of my query, that includes the culprits:
SELECT APEX_ITEM.HIDDEN(10,TR.SEQ) || APEX_ITEM.CHECKBOX(20, tr.seq,'onchange="spCheckChange(this);"',:F500_REQUEST_LIST,':') "Is Requested?",
+APEX_ITEM.SELECT_LIST_FROM_LOV_XL(30,TO_ROOM_SEQ, 'ROOMS_LOV') "To Room"*_+
FROM TS_ASSETS TA, TS_REQS TR where <some condition>
Here is part of my code that extracts the values picked
-- this should pick only checked rows...
for i in 1..apex_application.g_f20.count
loop
some_checked_value(i) := apex_item.g_f20(i);
-- the below is coded thus, as thats the value that I see being set, when I inspect this element in firebug. Not sure how this came by, as I had set this item to 30 in my query...???
some_select_list_val(i) := apex_item.g_f01(i);
end loop;

Why don't you try this
SELECT    apex_item.hidden (10, tr.seq)
       || apex_item.checkbox (20,
                              tr.seq,
                              'onchange="spCheckChange(this);"',
                              :f500_request_list,
                              'f20_' || '#ROWNUM#'
                             ) "Is Requested?",
       apex_item.select_list_from_lov_xl (30,
                                          to_room_seq,
                                          'ROOMS_LOV',
                                          'NO',
                                          NULL,
                                          NULL,
                                          'f30_' || '#ROWNUM#',
                                          NULL,
                                          'NO'
FROM ts_assets ta, ts_reqs tr?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------------------

Set "current" or "active" record in multi-record Report or Form

Im trying to use HTML DB for the following:
Display a multi-record Report (or Form);
Mark one of the displayed records as "active" or "current", saving its PK/UK or rowid into a variable/field;
After that, select a function/process to be performed on or on the basis of this "active" record.
This is very similar to what is possible in 10g Grid Control, when, for example, you dislay (Administration/Tables) a list of tables (in a schema),
"select" one of the displayed tables, and then request, for example, to view the data in that table.
The question is, how do I define/attach the "Select" field (single-valued radio) to each of the displayed record in my multi-record Report or Form ??

Im trying to use HTML DB for the following:
Display a multi-record Report (or Form);
Mark one of the displayed records as "active" or "current", saving its PK/UK or rowid into a variable/field;
After that, select a function/process to be performed on or on the basis of this "active" record.
This is very similar to what is possible in 10g Grid Control, when, for example, you dislay (Administration/Tables) a list of tables (in a schema),
"select" one of the displayed tables, and then request, for example, to view the data in that table.
The question is, how do I define/attach the "Select" field (single-valued radio) to each of the displayed record in my multi-record Report or Form ??

Multi query reports and BI Publisher?

I have to create a report that gathers data from DB using several SQL queries - text mixed with data tables. I was not able to find anything like that in Apex 3.0 or BI Publisher. Am I missing something?
As a solution I was trying to pass more complex, hierarchical XML data structure to BI Publisher with several repeating groups that would serve my purpose. Apex seems to generate only one level XML.
Is there a way to generate XML file manually and pass it to BI Publisher?
Thank You
Janis

Does anyone have an idea on how to create multi-query report?
..or maybe how to manually create XML and pass it to BI Publisher?
Tahnk you!
Janis

Multi Query Reports

Hi!
Can we have multi query reports ? reports displayed in Frames in a report???????
Imran

Hi,
yes you can have multiple query in your report. So you have multiple groups in your data model. Then you must put multiple repeating frames in your layout in order to extract data from your queries, selecting the desired group in the source property of your repeating frame.
Bye
Raffy

How too save multi page reports as .tif?

It seems like I had this one figured out at one time but now I don't see it. How do I save a multi page report, (the plots) as a .tif file?

Dear DIAdem user,
unfortunately DIAdem can't save multi page TIFF files directly but there is a solution using VBScript.
The attached script solves the problem if your system fulfills the following system requirements:
Operating System: Windows XP with SP1
Installed "Windows Image Acquisition Library v2.0" (You can download this library from the Microsoft Download Center.)
The script first saves TIFF files from all lyout sheets in a loop. After that, one multi page TIFF file is created from all single page TIFF files by using the Windows Image Acquisition Library.
I hope this will help you!
Christian
Attachments:
MultiPageTiff.VBS ‏3 KB

Multi-language report in XML publisher (This is urgent!!)

Hi All,
i am working on Multi-Language report. We have installed just 3 languages (English, Japaneese, Spanish) but my requirement is to display the reports in few more un-installed languages like Korea, chineese etc. I thought of doing the lables (all hard coded fields) translation using .XLIFF file. When i try to run the report, in language settings (this is the place where the XML report takes the language input) i can see only those languages which are installed. How can pass other languages (un-installed) as a parameter in the XML report?
Please suggest. It is very urgent.
Thanks,
AS

Hello,
The OTN forum for XML Publisher (now called BI Publisher) is here :
BI Publisher
Regards

Multi panel report

Similar Messages

Maybe you are looking for