Multi-SCO Packager does'nt works with scorm 2004 (captivate 7) ?

Hi everybody,
I recently published a mutli scorm using Captivate 7 and multi scorm packager.
Eveyrthing works great when I publish each content to scorm 1.2 and use multi scorm packager after. It works fine in my LMS (moodle or Dokeos).
But when I publish each content to scorm 2004 and after use multi scorm packager, my course doesn't work in my LMS. A new window is open but nothing is displayed.
Anyone has the same issue with mutli scorm packager from captivate 7 and scorm 2004 ?
Best regards.

Hi,
I just tested the same workflow as you mentioned, i created a new project in version 7, set reporting fro SCORM 2004 and published using multisco packager and uploaded it to an LMS (http://cloud.scorm.com)
I was able to launch and go through the course successfully which makes me curious about the nature of your course.
could you please tell us, if this was built in a previous version of Captivate?
can you upload the same package to scorm cloud and verify the results.
Caan you check the Edition of you settings which is 3rds by default. (Quiz-- Quiz Preferences-- Scorm 2004--Manifest), republish and then upload again.
Good Luck.
Anjaneai

Similar Messages

Captivate - Multi SCO Packager does not open

eLearning 6.1 was installed on several machines, but neither one could get SCORM to work. From Start > All Programs > Adobe eLearning Suite 6.1 > Multi SCO Packager, it opened a gray empty window. Same problem if I opened from Captivate File > New Porject > Multi SCO Packager. I installed Captivate 6 and Captivate 7 on different machines, I still got the same issue. eLearning6.1/Captivate had the latest updates as well as Windows 7 64-bit SP1.
How to fix this? Please help.

Thanks RodWard, here is a screenshot. The Adobe menu shows the content, but the New Course and Publish Course are inactive.

Does it work with Office 2004?

Has Lion been patched so it now works with Office 2004. I do not really want to upgrade to the latest version of Office as I don't think it is any better than my current version.

No it hasn't and it never will be. Stay on Snow Leopard if you want to stay with Office 2004.

SCORM 2004 version required by Multi Sco Packager 6?

Does anyone know which version of SCORM 2004 is required by the Multi Sco Packager? I have a SCORM .ZIP file packaged for 2004 v2.3 and the MSP is telling me that the SCORM version is "incompatible." Thanks! Laura

Hi there,
Welcome to Adobe Community.
If you are getting that error then try changing the Scorm 2004 version to 3rd edition under the manifest.
Thanks!

Difference between Aggregator Project / Multi SCo packager / multi captivate projects with links...

Now I have to admit I am a little lost between the possibilities of captivate 8...
What differences exactly between these developements:
Aggregator project?
Multi sco packager?
or create a single file with mutliple Captivate projects all linked through the Action : "open the project or URL"....?
If I need only a single SCO on one unique completed course, should I use the project aggregator ?
but would the projects sizes be a problem? and explain why to use the Action : "link to project"..rather than the aggregator?
basically I wish one single file with all the courses accessible from one screen / (project?)
reports only on the course followed, resume on the course, back to the course Menu language selection .....
thanks for any help....the more i read the more i am lost... ;(

Thank you for this details.
It seems then that none of this two, aggregator or packager, can be 'twisted' to be used in the Menu selection I need.
Aggregator project?
A way to link several Captivate output files through a common menu created by the aggregator.
>Does using the aggregator mean there are still several / each output files to be uploaded in the LMS separately?
Are you publishing to swf only?
>I publish for the LMS plateform, swf, html, but also for IPads! Would it make a difference?
"You could also have your manifest point to a language selection page which would then launch the applicable Captivate files."
>Is there a good video tutorial that would show how to link and publish captivate projects together? I have created a Cp menu page with buttons that would link to each cp (language) files but I am not sure I do it properly...
I need to be sure what to enter in the Actions/Link to file or link to URL field...and to follow the right step to publish and copy paste the files in the same (callees...) folder...
Many thanks for your help!

After installing acrobat my Microsoft office package does not work properly, word will not open and in my email i can't select anything with the mouse

After installing acrobat my Microsoft office package does not work properly, word will not open and when I want to write an email in my outlook email i can't select anything with the mouse. so copy past en delete are not an option.@

Are you using any MS Office third party Add-ins? Test: Remove third party Add-ins other than PDFMaker. Test to see if the MS Office apps run afterward.
Did you attempt to repair MS Office? Test: Go to Add/Remove Control Panel run Repair.
Finally, have you tried testing to see if it's PDFMaker? Test: Use the Add/Remove Control Panel to modify the Acrobat installation to remove PDFMaker. See if MS Office applications launch and behave correctly?

Multi-Sco Package Freezes at End of First SCO

Greetings!
I have created a simple 3-SCO 2004-manifest Multi-SCO package for upload to our LMS.
SCO1 - Pre-Test
SCO2 - Video
SCO3 - Post-Test
My problem is that no matter what I try, the playback freezes at the end of the first SCO and will not proceed to the second one.
Our LMS is Interactyx (which I gather is loosely based on Moodle).
On a lark, I also created a 1.2 manifest version, and it too failed to proceed from one SCO to the next.
In the "At End" options, I have tried forcing it to call the next SCO directly (link and by file name), and I have tried the "Stop" option, and I have tried the "Close" option and I have tried the "Continue" option.
Uploaded separately, each SCO works perfectly - I only have trouble w/ it going from one SCO to the next. I've called Adobe tech support and they've watched it do this via screen sharing and are working on it - but I hoped someone here might have a quick solution.
Does anyone have any tips/tricks/technomagic that will fix this for us?

I am having this exact problem with my MultiSCO. We have several modules set to close after playing. All of the SCOs open one after another perfectly, except that first one. The designer programmed a button on the last slide to open up the next movie in the sequence and it worked. Not as nicely as the other SCOs, but it did work. I know this is way to late to help you, but maybe it will help the next person!
Kelly
@KellyPhillipsNC
www.effectivetrainingdesign.com
www.redfeathernetworking.com

Multi-SCO Packager is not included in Adobe Captivate 6?

I justed downloaded Adobe Captivate 6, and installed it as a trial. I didn't find the Multi-SCO Packager. So it was still not included in Adobe Captivate 6?

Passing no judgement on whether this alignment was a good idea or not...do then consider the eLearning Suite for your next upgrade if the packager is indeed important. HOWEVER, be sure it is - it's a nice tool for easing the upload of many lessons into the LMS...but it does NOT automate Sequencing, which is the somewhat automatic transition between lessons based, as far as I know. It's simply a tool for bundling several separate SCORM packages into one .zip. For instance, in our LMS, uploading a SCORM package made with the Multi-SCO Packager saves time, but results in several separate lessons that have to be individually launched from the LMS anyway...
So you may not be missing out on much
NOW, having the Aggregator suppor Sequencing, THAT would be cool!

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

Can the multi-sco packager be used to package Muse projects for LMS?

We are currently experimenting with Muse, and we are interested in the posibility of using Muse to develop eLearning courses. Is there any way that Muse projects can be packaged into a zip file that can be loaded into an LMS? Perhaphs using Captivate's multi-sco packager?

Captivate's Multi-SCORM Packager is purely for Captivate content and it usually has to be created by a specific version of Captivate to be compatible with a specific version of the packager app. So, the answer is most likely to be no.

Multi-select LOV does not work in forms

the multi select LOV does not work in the form.
the LOV works individually but in the form it does not work. it does not allow multiple selection from the list.
is there a workaround for this or is this a bug ...?
any ideas ...?
thanx a lot.
null

Right, we cannot store more than one value in a single column in a table :), we were getting a lot of requests to support multiple select LOVs but requirements were contradictory if not mutually exclusive.
The only sense it makes is when used together with user-defined object types (nested tables for example) but the current [application building]infrastructure we have does not support this. However, we are looking into this and this feature maybe implemented in a future release.

Dm4-1060us laptop SD Card Reader 5-in-1 question. Does it work with SDHC and SDXC memory cards?

dm4-1060us laptop SD Card Reader 5-in-1 question. Does it work with SDHC and SDXC memory cards?

This cart reader is a kind of multi card reader and you can use different cards with it. In my opinion every multi device should be used very, but very gently. I do not know what happened exactly in your case but maybe you have damaged something inside.
Try to restart your notebook and use other SD card to check if everything works well. Please do it very gently and if you see something is wrong stop with inserting the card.
I use 1 GB SD card on my A200 without any problems.
In my opinion you should check notebook by technician.
Bye and good luck!

Multi-SCO Packager Lesson Hierarchy

I am creating a course using the Multi-SCO Packager. When I test my course in Scorm Cloud, the Scorm player designates my first Lesson as the 'parent' lesson and all the other lessons it's 'children'. How do I remove this indentation so all lessons are on the same level?

I tested using both the Multiple SCO template in 1.2 and 2004. I also tested using the Simple Remediation which produced the same 'indented' result. I just tested the course again after shortening the title of the initial lesson and that seemed to resolve the issue, However I would like to resolve this without changing the title length if possible. Any other ideas? Thanks!

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Multi-SCO Packager does'nt works with scorm 2004 (captivate 7) ?

Similar Messages

Maybe you are looking for