Multiple account assignment of p.r while acct. assignment is P & itemcat-D

I AM FACING A PROBLEM IN CREATION OF P.R HAVING MULTIPLE ACCOUNT ASSIGNMENT . I AM TAKING ACCT. ASSIGN MENT CAT- P i am distubting in different WBS ELEMENT. BUT SYSTEM GIVES AN ERROR MESSAGE
Multi acct. assgt. not allowed for ind. cust. req. or engineer-to-order
Message no. 06268
Diagnosis
Multiple account assignment is not defined for items with account assignment to "individual customer requirement" or "manufacture for individual project" (engineer-to-order).
This means that you can only enter one account assignment item in the case of individual customer requirement or engineer-to-order.

pls go to spro-mm-purchasing- account assignment-maintain account assignment-select the account assignment u r using-check ID: AcctAssgt Scrn.
regards,
indranil

Similar Messages

  • ERROR WHILE POSTING MIRO FOR MULTIPLE ACCOUNT ASSIGNMENT (ASSET)

    Hi Guys,
    We created  a PO for asset with multiple account assignment. And we immediately do IR instead of GR.
    While doing IR it is giving error
    1) Quantity delivered is zero - Warning message
    2) Account 245350 requires a Transaction Type or is Invalid - Error message
    what may be the problem. how can we eliminate and post it
    Regards
    palani

    Hi,
    I would assume the G/L account you used was not properly set up.  Did you get the same problem if you try to change to another G/L account?  Perhaps, get your FI specialist to look into this G/L account-related error and verify it.
    Cheers,
    HT

  • Problem in multiple acct. assignment

    Dear cons
        While creating a pur. Req. (T-code- me51n) with  Multiple acct.assignment (p). The system gives an error message that Multi acct. assgt. not allowed for ind. cust. req. or engineer-to-order
    Message no. 06268
    Diagnosis
    Multiple account assignment is not defined for items with account assignment to "individual customer requirement" or "manufacture for individual project" (engineer-to-order).
    This means that you can only enter one account assignment item in the case of individual customer requirement or engineer-to-order. Pl. give me in details where can I MAKE SETTING SO THAT I CAN DO THE MULTIPLE ACCT. ASSIGNMENT.

    Hi,
    Please follow as shown below
    SPRO>MM>Purchasing>Account Assignment>Maintain Account Assignment Categories
    here select your industry sector and click Details on top  and in the field ID: AcctAssgt Scrn you can choose multiple account.
    Reward points if useful.
    Thx
    Raju

  • PO Error in Process with Multiple account assignment

    Hi ,
    I am working with Extended Classsic scenario.
    Problem is with PO with Multiple account assignement.
    There is only one user who is getting problem with one particular account assignement "CCC" - Cost Center RP.. . When PO gets created with this particular AAC , it goes into "Error in process" only for one user.
    In RZ20 it shows messsage as "Please enter quantity or percentage for account assignment" & "Distr. ind. and partial invoice ind. must be set f or multi acct. assgt.".
    On other hand , other users are able to order the PO with the same AAC without any error.
    What could be the reason behind this only for one user ?
    Regards,
    Sheetal

    Hi ,
    I have checked it intially and both are identical.
    Initialy the problem was, user had entered 128 times AA line items  ( added & deleted ) in the PO while in the SC it was having only 64.... Our system accepts line items till 99 , so i asked him to delete the items above 99 ..
    So after that POs error has gone and it went for approval..
    But after approval it again went into error in process
    Sheetal

  • Down payment with multiple account assignment PO

    Dear Experts,
    While posting down payment request through transaction F -47 with
    reference to purchase order we are getting below given error.
    In that purchase order we have given
    multiple account assignment i.e. multiple cost centers (e.g. Cost center A  50% cost center B 10% Cost Center  C 40% i.e. distribution by %)
    but
    system is flagging message
    Item 00010 of purch. document 4500024875 contains no suitable account
    assignment
    Message no. ME717
    What will be the possible cause?
    regards,
    Abhijit

    Hi,
    In the request f-27 tr.code give the purchase order which item you want to give ie., for above said example 10 is a line item of 4500024875 - purchase order and beside you have to mention
    10(lineitem) 4500024875 (purchase order) 2009 (year)
    and system will take that request against the above purchase order.
    Regards,
    satish

  • GR and GR Non Val indicator in R/3 PO for multiple account assigned SC's

    Hi,
    We are on SRM 3.0(EBP 4.0) and R/3 4.7.
    We have implemented the BBP_CREATE_PO_BACK badi for setting or clearing the GR and IR indicators under certian conditions.
    But for Multiple account assigned SC's we get an error message "06181 With non-valuated GR, please also enter GR i ndicator ".
    We have tried implementing note# 872000, but this has not solved the issue.
    The PO's get created only if we force the GR indicator when transferring the data into R/3.
    It seems clear that while creating the PO the system is encountering the GR Non Val indicator but not the GR indicator, so its throwing the error message (we get the same error message when we create the PO from R/3 with GRnon val indicator checked and GR ind unchecked).
    The proposed solution is that in the same BADI, along with clearing the GR indicator, we will also clear the GR non val indicator.
    This can solve the issue if the indicators are transferred as it is from EBP.
    But can anyone tell me if these indicators are also checked/changed in any FM/program in R/3 before the PO is created?
    Is there any customizing setting which is affecting this particular behaviour?
    Regards,
    Srivatsan

    Hi Srivatsan ?
    In ECC, you have a configuration point :
    Materials Management->Account Assignment->Maintain Account Assignment Categories
    Here you can untick the indicator you want by account assignment category;
    Kind regards,
    Yann

  • MIGO in case of multiple account assignment.

    Hi,
    I have created PO with multiple account assignment. AAC is P.
    While doing MIGO, FI document is not getting generated.
    Can anyone plz explain how multiple account assignment functionality works?
    Regards
    Nilesh

    Hi
    Its a standard practice that if there is multiple account assignment, the proportion will not be appearing at the time of MIGO. It will get updated only at the time of Invoice verification.
    Regards,
    Lakshmanan Krishnan

  • GR Printing For Single Line Item With Multiple Account Assignment.

    Hi All,
    There is PO for projects (Account Assignment -P - Network) in which in a single item consist of multiple account assignment.
    Noe while entering the GR I select "Collective Slip" option but when the GR is posted system automatically select option "Individual slip" and seprate line item are printed for each account assignment.
    The printing program is standard SAPM07DR. The SAP version is 4.7. Can anyone tell what is ther any setting in configuration or is it problem in program or smart form
    Thanks & Regards,
    Omkar

    hi
    please check your form and routine used to print.

  • Multiple account assignment for limited PO

    Hi experts,
    Currently need to create a limit PO (item category B) with acct assignment category (P project).
    however, i need to maintain 2 project codes under the "WBS element" field.
    using limit PO, i can only maintain 1 project code.
    Appreciate if anyone can advise where can i configure (or is it possible) to have such implementation for PO creation. Thanks.
    Regards,
    JL

    Hi
    I have also checked that multiple account assignment is not possible for Limit PO's ( Item category B)
    But You can post to Multiple Account assignment objects at the time of Invoice Verification.
    Thanks & Regards
    Kishore

  • PO with single & multiple account assignment

    Hi expert,
    I got one PO with single & multiple account assignment. How should I book invoice. I try using MIRA for items with multiple acct and MIRO for items with single acct. I works but can I do it in one shot instead of splitting. If so, how?
    One more thing: if I got invoice saved in MIRA but without any items. It can't be changed. It say it is schedule by background. How could I change it?
    Thx

    Hi
    You can use MIRO to check book the invoice for both single account assignment and mulitple acc assignment.
    You have to select the lay out Account assignment with cost center.
    For Multiple account assignment you can see the Button in the line item, click it to maintain the multiple account assignment.
    Hope it helps.
    Thanks /Karthik

  • Delivery cost with multiple account assignment

    Dear SAP gurus,
    I found a problem in here. In my company we are using multiple account assignment in PO with multiple asset entered in one line. This PO actually will have customs and delivery cost inside of it, however it is not know at the time of PO creation. When the forwarder send the goods, sometimes the shipment can contain more than one PO as well, thus it is impossible to determine the exact value of delivery cost at the time of PO creation.
    When the goods are delivered in the FOB point, the vendor deliver goods will send the invoice for goods, and when the goods delivered to our warehouse, then the forwarder will deliver the invoice for the delivery cost. So there is no sequence of the invoicing. Sometimes the goods are invoice earlier than the delivery cost, sometimes it is later.
    My requirements are to make sure that the delivery cost is being posted to the asset account of the goods that are being delivered in the PO. I have tried these options:
    a. Planned delivery cost inside the PO --> when posting invoice for planned delivery cost, got error message that there is no delivery cost in the PO. I think this is because of the multiple account assignment because when creating PO and inputting the delivery cost i do get warning that no delivery cost for multiple account assignment,
    b. Unplanned delivery cost --> ONLY work if the invoice for delivery cost and goods are being posted as one document, which is not the case in here.
    c. Separate PO for delivery cost --> got issue in which the person who supposed to create the PO for delivery cost, would not have any idea what asset no to be used (worse --> if the asset is being delivered partially).
    Do you have any idea of what to be done in this case? Please help.
    Best regards,
    John.

    See  while making the invoice for the delivery cost you have selected the aggreation as planned delivery cost and in the PO you have not maintained the deilvery conditions .The pricing conditions which you have maintained must ebe  have condition category - delivery cost .The system will not give thr message thhat you have not mainatined the delivery cost .If you have condition as mandatorty it will show that the conditions ( mandatory) are not maintain.In order to maintain the delivery cost you have to check your conditions whether they are delivery cost related conditins and if then maintain there values in PO and check while doing invoice you will get.
    You have also the option of entering the delivery cost at time of the Invoice as unplanned delivery cost ...........
    Just check your conditions which you have maintained the calculation schema as delivery conditions and maintain the values and do the invoice proceesing .
    It is not advisableto cretae the sepearted PO for the delivety cost as it is not good way of doing the proceess.
    Regards
    sunny

  • Asset PO with Multiple account assignment..!!!

    Hi all ,
    i am creating asset PO with multiple account assignment and having pricing condition 5.5% Octroi..
    While doing the MIRO , system should distrubuted octorie amount  to all the assets ( load to asset value )
    But system is not capture the octorie amount in MIRO...
    Any customization required for multiple account assignment in case of Asset PO ..??
    Please help.

    Hi,
    In MIRO, item detail screen, you check for a button which allows apportionment of the value.
    Regards
    Aloysius

  • PO with multiple account assignment

    Hi Experts,
    While creating PO for multiple account assignment system is automatically picking 'GR Non-Valuated' check box.After doing a GR no accouning document generated.
    How is the goods receipt valuated for a purchase order with multiple account assignment?
    Please explain.
    Thanks,
    Sanjana

    Hi,
    It is possible to create PO with multiple account assignment,but you will not get accounting document at the time of GR.it will happen at the time of MIRO,as i have allready explained.
    If you will create PO with multiple account assignment for Services,System will generate Accounting document at the time of GR.
    I hope it will clerify.
    Regards,
    Manish

  • Multiple account assignment PO with Asset

    Hi all
    I am making an Asset PO with quantity 5 and with multiple account assignment selection  & distribution on qty basis with different Asset No. for each
    In this PO the octroi charges are maintained. during the MIRO simulation the delivery cost is not capturing
    Kindly let me state the stepings to solve this problem .
    Thanks in advance
    Regards
    Rajesh

    hi
    as ur po is with multiple acct assignment,check ur GR it will be non valuated so in miro u have to make manual entry of octroi
    try createing new item for the new acct assignment and then do the cycle
    regards
    KI

  • Valuated GR not allowed in case of multiple account assignment

    Hi Friends,
    While creating Asset PO with multiple account assignment categories from SC
    i received the following error message in RZ20.
    PO 0030065837: No instance of object type PurchaseOrder has been created. External reference:
    PurchOrder 0030065837: Purchase order still contains faulty items
    PO 0030065837: Valuated GR not allowed in case of multiple accoun t assignment
    PurchOrder 0030065837: Transfer failed
    Now the PO status is error in process
    Can any one help on this issue...
    Thank You
    Shrinivas

    Hi shrinivas,
    When you are having the multiple account assignment, then the system will force you to have GR-non valuated indicator being flagged which results in the fact there is not any FI document at GR posting stage and this is the standard feature of SAP
    can you tell me whether you have that option of selecting or deselecting the GR nonvaluated in PO creation(EBP).If it is there falg it and reprocess the Sc
    hope this will help
    regards
    subbu

Maybe you are looking for