Multiple Actions not working for DPS
I've created a box and made it into a button. I've assigned two actions to this button:
If I have both actions checked, it works fine in the preview within InDesign, but does not work on the desktop Content Viewer and it does not work when uploaded to the iPad.
If I uncheck either box, it works well in all scenarios. Any ideas.
No Bob, it does not. It just has two states:
"menorah blank": A white box on the page that is "invisible" since it blends in with the page color.
"menorah popup": A pop up box with the graphics. There is an invisible box (but not within the "menorah" MSO" that sits above the red "x" box to send the "menorah" MSO back to it's blank state. Could this be the problem?
I'be be happy to ftp that single indesign page to you if it would help.
Thanks for the speedy reply!
Similar Messages
-
Multiple occurence not working for extended idocs
hai friends
iam doing file to idoc senario in that multiple occurence is not working for Z segments.
it is extented idoc .
in taht multilpe segments are not creating only one segment is creating
what is the problem
pls help me
with regards
srikanth vipparlaHi Srikanth,
You should map the node of the target side(the one which you want to occur multple times) to the node of the source side based upon which the target side node has to occur multiple times. For example lets say our source and target side structures are like this:
<Source>
<Element1>
<Element2>
<Element3>
</Source>
<Target>
<Element1>
<Element2>
<Element3>
</Target>
Now if you want Target to occur n times if Source node occurs n times, you should map Target node to the Source node. Even in case you want that Element1 of target side should occur as many times as many times you have Element1 of Source side, you should do the same.
Thanks and Regards,
Sanjeev.
PS: Reward points if helpful. -
This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).
I am connected to the internet through a Verizon Wireless card, that is my regular internet connection.I did all that HT1925 recommended and it was no help. My computer still won't recognize my iPhone. Often trying to start Apple Mobile Device Service fails with an error message that it starts and then stops immediately.
-
Cp8 pc, action 'exit' (for close app), not work for iphone app
i found bug,
when you use the action 'exit' on pc( it work well).
but on iphone, it not workaction "cpCmdExit" , it not work for iphone.
-
IPhone 6 External Mic not working for Siri/Dictation
I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation. When I plug in the earbuds, they work for everything (including Siri/Dictation).
Was chatting to Apple support who had me reset all settings. I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works). When I turned Siri back on, it does not work.
I have two questions for the community to see if you can help:
1- I have been assuming this must be a software problem since the mic does work for non-Siri access. But is that true? Is there a hardware component that Siri depends on which could be faulty here?
2- If it is software, what action should I try to address it? I have done a reset all settings already and that did not help.
DougHi, everyone. I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again. I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test. If you can hear your voice recording clearly, then the mic works. I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work. So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls. Will need to go back to Apple Genius this weekend for sure. Will give update after the weekend.
-
Image Processor not working for me. Help!
In a nearby thread I've reached a stumbling block. Image Processor in CS4's PS is not working for me. I have a folder of psd's generated on the fly via File > Export > Data Sets as File... and now I'm trying to process those psd's to generate a JPEG of each. The only strange characteristic of the auto-generated PSD files is that there is no image preview available within the Finder. When a psd is selected the preview pane reads:
"This layered Photoshop file was not saved with a composite image"
I've verified in my Preferences > File Handling that image previews are always saved. (But I've been using PS for a long time and previews are always available with all my manually saved work.)
So here's what happens when I invoke File > Scripts > Image Processor...
In section 1 of the menu I select the source folder where the psd files reside
In section 2, I select 'Save in same location'
In section 3, I select 'Save as JPEG'
In section 4, I change nothing. No special actions. Include ICC profile is checked.
When I select run I get an error message: "Sorry, I could not process the following files:"
And then it lists what appears to be 3 lines per psd file in the source directory:
The path to the source dir
The name of the source dir
The [source_dir]/[filename.psd]
What am I doing wrong?mrdior wrote:
I have a folder of psd's generated on the fly via File > Export > Data Sets as File... and now I'm trying to process those psd's to generate a JPEG of each. The only strange characteristic of the auto-generated PSD files is that there is no image preview available within the Finder. When a psd is selected the preview pane reads:
The part I don't understand is the "export" Part. File > Export > Data Sets as File.. on my machine is grayed out so I don't know how this feature is used. Is Export > Data Sets as File... used with CSV data sets and Photoshop variables?
Check your Photoshop preferences and make sure you have set in the file handling tab "Maximize PSD and PSB File Compatibility:" to Always using the pull down menu. If that is not your current setting try setting that to see if the exported PSD files contain composite previews. When I use save as PSD on my system I alway see Photoshop save through up a popup window stating generating composite preview image. -
Cascading Select Lists - Not Working for me
I am trying to implement Denes Kubicek's Ajax Cascading Select List solution.
http://apex.oracle.com/pls/otn/f?p=31517:119
But it is not working for me.
I'm a newbie to APEX and checked the forum for advice on cascading select lists. I saw the thread for
"Cascading Select Lists - Not Working" posted by sue and the replies by Varad Acharya, but I'm still
having issues of not seeing the alerts, not able to run the pl/sql process in SQL Workshop, and not
getting the expected results.
I have a list of countries (US - USA, CA - CANADA, etc.) and a list of states for each country. When a
user selects a country I would like to show the list of states within that country.
This is what I've done so far:
Defined an application process:
Process Point: On Demand: Run ... by a page process.
Name: CASCADING_SELECT_LIST1
Process Text:
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<select>');
HTP.prn ('<option value="' || 99 || '">' || '- All States -'
|| '</option>'
FOR c IN (SELECT state_code || ' - ' || state_desc d, state_code r
FROM tbk_state
WHERE country_code = :cascading_selectlist_item_1)
LOOP
HTP.prn ('<option value="' || c.r || '">' || c.d || '</option>');
END LOOP;
HTP.prn ('</select>');
END;
defined and application item:
Name: CASCADING_SELECTLIST_ITEM_1
Build Option: - No Build Option -
Created a 'Form on a table with report' as follows:
Page 5: Report on TBK_HARDWARE_LOCATION
Page 6: Form on TBK_HARDWARE_LOCATION
in HTML Header of the page attributes for 'Form on TBK_HARDWARE_LOCATION' I have:
<script language="JavaScript" type="text/javascript">
<!--
htmldb_delete_message='"DELETE_CONFIRM_MSG"';
//-->
</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue)
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
On Page 6: 'Form on TBK_HARDWARE_LOCATION' I have the following items (plus some others):
Name: P6_COUNTRY_CODE
Display as: Select List
HTML Form Element Attributes: onchange="get_select_list_xml1(this,'P6_STATE_CODE');"
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: COUNTRY_CODE
Named LOV: LIST OF COUNTRIES
Name: P6_STATE_CODE
Display as: Select List
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: STATE_CODE
Named LOV: - Select named LOV -
List of Values definition:
select state_code || ' - ' || state_desc d, state_code r
from tbk_state
where country_code = :P6_COUNTRY_CODE
order by 1
LIST OF COUNTRIES is defined as:
select country_code || ' - ' || country_desc d, country_code r
from tbk_country
order by 1
Now to the problem:
I run page 5 (the report) to see the list of locations and then I try to edit a record (page 6). When I
try to select a different country I get the following error (on IE):
"Problems with this web page might prevent it from being displayed properly or functioning properly.
In the future, you can display this message by double-clicking the warning icon displayed in the status
bar.
Line: 17
Char: 5
Error: Object expected
Code: 0
URL: http//cmrac4.cm.timeinc.com:7777/pls/htmldb/f?
p=114:6:1413254636072443110::::P6_HARDWARE_LOCATION_ID:2
I don't see any of the alert messages.
I also tried to run the application process code in the SQL - Command Processor (I replaced
:cascading_selectlist_item_1 with 'CA' or 'US') and got the following:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh
button, or try again later.
Only one top level element is allowed in an XML document. Error processing resource
'http://cmrac4.cm.timeinc.com:7777/pls/...
<select><option value="99">- All States -</option><option value="X1">X1 - X1</option><optio...
Can someone help me please?Varad,
First, thank you for taking the time to try to help me with this problem.
When I view the page's source code (here are the first few lines):
<html lang="en-us">
<head>
<script src="/i/javascript/core.js" type="text/javascript"></script>
<link rel="stylesheet" href="/i/css/core.css" type="text/css" />
<script language="JavaScript" type="text/javascript">
<!--
htmldb_delete_message='Would you like to perform this delete action?';
//-->
</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
//alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
//alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue);
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
It looks like line 17 is:
var l_Select = html_GetElement(pSelect);
I'm still not sure why I'm getting this error and why it's not working?
Thanks,
Eti -
SSO is not working for SAPGUI for HTML
Hi Experts,
We have configured SSO between EP and ECC.SSO is working fine for SAPGUI for windows.But it is not working for SAPGUI for HTML.
Workflow iViews are getting error.
"SWITCH to HTTPS does not occur."
The domain names are different for EP and ECC.
Please let me know ,is there any settings need to check.
Regards,
Bala.Hi
The point here is that your Portal server is on a different domain, so you have to configure the logon ticket issuer (portal) to generate logon ticket for multiple domains.
http://help.sap.com/saphelp_nw04s/helpdata/en/a0/88a340fa432b54e10000000a1550b0/frameset.htm
Best regards
Johann -
Search is not working for subsites
hello,
SharePoint search is not working for any of the subsites and it is just working for top level site. I can see that all the subsites is visible in search. Any idea?
interesting thing is, it is not working just for one site collection subsites. If i do search in subsites of another site collection of the same web application than it is working fine and it is working fine for all ohter web apps too.
Please help.
Thanks,Hi,
I agree with Chris, please check following in your sub site: http://site_name/subsite_name
1. Click on Site Actions -> Site Settings ->Modify All Site Settings
2. Click on Search visibility.
3. Check All this web to appear in search results.
4. Browse to the document library or list in your sub site.
5. Click on Settings->Document Library Settings or list settings.
6. Click on Advance settings.
7. Check the last item - All items from this document library to appear in search results.
Hope this helps.
Rock Wang
Rock Wang– MSFT -
Incoming Email not working for one web app, but IS working for others in same farm.
I have enabled incoming email in a large multi-web application farm running SharePoint 2013 SP1 and the Feb 2015/March 2015 CUs that were pushed down in Windows Updates. It works just fine for two web applications, but it will not work for one particular
web application. I see the email land in the /drop folder. If I remove the email address from the library in http://nonworkingapp web
application and use it on a library in a http://working web application, then the email is processed successfully. Conversely,
if I take an address from a library in http://working and move it to a library inhttp://nonworkingapp it
does not work. I've tried multiple site collections on http://nonworkingapp. This rules out any SMTP issues, etc. and means
the issue is bound to this web application. Permissions are the same between the "non-working" and "working" locations: domain users are members on the site, and the library inherits permissions from the site. The App Pool and Timer
Service accounts have rights to the folder and to the library.
The error in the ULS log is the typical error processing message, but it gives no additional information even though I have enabled Verbose logging.
The Incoming E-Mail service has completed a batch. The elapsed time was 00:00: 00.0156294. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message
ID:
Typically, you see "alias not found" or some permissions or quota issue here, but this issue is NOT the same as those. In this case NO additional information is provided in ULS.
Edit: running stsadm.exe -o refreshdms -url http://one/failing/site fixed some similar issues where "Unknown alias" was
reported even though the list did have an alias (see here:http://blogs.technet.com/b/vinitt/archive/2009/07/15/e-mail-enabled-list-alias-information-is-not-synchronized-between-configuration-database-and-content-database.aspx).
This did not fix the issue for the case mentioned above.
What could possibly be the issue preventing incoming email from working on this one web application?Thanks for your reply. Incoming E-Mail was running on all 3 WFE, however I do not think this was the cause. As noted, _other_ emails send to http://workingapp are working just fine. I can send two emails - one to a library on http://workingapp
and another on http://notworkingapp. The email to http://notworkingapp will sit in the drop folder, while the one to http://workingapp will be processed correctly. In addition, the ULS log on WFE1 indicates an attempt to process the file fails.
So clearly, the timer job on WFE1 is running and attempting to process the file. For kicks, I disabled the service on WFE2 and WFE3, but with no change in the behavior.
WRT to #1, I have done this already (as noted in the original post). I can remove an alias from http://workingapp and place it on http://nonworkingapp and it is not processed. If I return it to http://workingapp it is processed. In other
words, I go into Library Settings -> Incoming Email for a working library, and copy the alias, then disable incoming email for that library. I then go to Library Settings -> Incoming Email for a non-working library, enable incoming email, and paste
the alias. Once done, emails sent to the alias are not processed. I then do the reverse, and it works again.
On #2, I have already tried multiple libraries on http://nonworkingapp (also as noted in the original post).
In my environment, incoming email does not work for any library on http://nonworkingapp, but does work for any library on http://workingapp. Troubleshooting listed above has ruled out any problem with basic mail server configuration or library settings
- the problem is bound to http://nonworkingapp
I'm not sure what you mean by "steps to reproduce the issue". If I knew that, I would probably be able to solve the issue. The best I could come up with to describe the situation would be:
Set up SP 2010 in a three-node configuration with multiple web apps
Enable incoming email and confirm it works
Migrate to a SP2013 SP1 farm in a three node configuration.
Enable a new email alias for a library
Observe that it doesn't work for one web application.
Obviously, it's pretty unlikely that attempting that in a lab would actually have the same result. -
Drill down is not working for Pivot tables,but working for chart
I have two reports and trying to navigate betwen summary report to detail report. But details report is displaying all the records .The filter condition is not working and displaying all the filters .I have Case statement in my filter.But the summary report column where the filter condition is applied is aggregated in the RPD level. Does this might be the reason ?. Is it passing different type of data type to details report ?. The filter condition is not working for Pivot table .But Chart is working fine and displaying the only selected records based on the filter condition.
Please help me with the below issue.Hi sil174sss,
Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
can reference to this similar thread:
lost collapsing columns when export to excel
Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
Article below about how to add Expand/Collapse Action to an Item for your reference:
http://msdn.microsoft.com/en-us/library/dd220405.aspx
If your problem still exists, please feel free to ask
Regards
Vicky Liu -
ODI 11g 11.1.1.7 with Win64 bit OS : Strange problem : Right click does not work for Create new data server in Topology.
On right click nothing happens at all. I have reinstall the ODI multiple times with right installer. issue persist.
Please help.Hi,
Did you use the generic installer or the win32 one ? You should use the former with Win64.
You can also check that your version of Java is supported in the certification matrix.
Regards,
JeromeFr -
EP6.0 SP2 to EP 7 upgrade - UWL not working for PCR approvals
Hi there,
Following the EP 7.0 migration, the UWL is not working for PCR approvals. Following the registration of the WebFlowConnector, using the default configuration, clicking a PCR approval item in the Inbox brings up the following error:
HTTP handler for starting an external service cannot be read
In order to rectify this, the following configuration file was uploaded.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd' [ ]>
<UWLConfiguration version="1.0">
<ItemTypes>
<ItemType name="uwl.task.webflow.TS50000075" connector="WebFlowConnector" defaultView="defaultView" defaultAction="launchIView" executionMode="default">
<ItemTypeCriteria systemId="D46CLNT080" externalType="TS50000075" connector="WebFlowConnector"/>
<Actions>
<Action name="launchIView" handler="IViewLauncher">
<Properties>
<Property name="iview" value="com.sap.pct.hcm.isrdispatcher.default"/>
<Property name="openInNewWindow" value="yes"/>
</Properties>
<Descriptions default="launchIView"/>
</Action>
</Actions>
</ItemType>
</ItemTypes>
</UWLConfiguration>
Following the new configuration, clicking the item HAS NO EFFECT i.e. no window, no action, nothing. The only available option available is an option to Forward the item.
I have tried the following ItemType names with the same result:
1. uwl.task.webflow.TS50000075.D46CLNT080
2. uwl.task.webflow.D46CLNT080_TS50000075
Has anyone encountered this before?
Cheers
JohnFYI. The problem seems to be occuring as a result of the running EP7.0 with a SAP R/3 46C backend.
I did manage to get this working in the end. I had to create an iView say "myISRDispatcher" based on the portal component com.sap.pct.hcm.isrdispatcher.default. Update the UWL configuration to refer tot his PCD location as shown below:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd' [ ]>
<UWLConfiguration version="1.0">
<ItemTypes>
<ItemType name="uwl.task.webflow.TS50000075" connector="WebFlowConnector" defaultView="defaultView" defaultAction="launchIView" executionMode="default">
<ItemTypeCriteria systemId="D46CLNT080" externalType="TS50000075" connector="WebFlowConnector"/>
<Actions>
<Action name="launchIView" handler="IViewLauncher">
<Properties>
<Property name="iview" value="pcd:portal_content/myISRDispatcher"/>
<Property name="openInNewWindow" value="yes"/>
</Properties>
<Descriptions default="launchIView"/>
</Action>
</Actions>
</ItemType>
</ItemTypes>
</UWLConfiguration> -
Why is Cfgrid not working for me
I am using CFMX7
Why is this not working for me?
This is Gridtest1.cfm
<cfoutput>
<CFFORM align="center" ACTION="gridtest2.cfm"
METHOD="POST"
name="getstuff" >
<cfinput type="HIDDEN" name="ID" value="#form.id#" >
<cfinput type="HIDDEN" name="customerno"
value="#form.customerno#"
>
<cfgrid name="Mygrid" width="960" query="getpermits"
gridlines =
"yes" rowheaders="yes"
selectmode = "edit" height="350" >
<cfgridcolumn name="id" bgcolor="##FFFFFF" header="ID"
display="yes" WIDTH="40" select="no">
<cfgridcolumn name="permitno" bgcolor="##FFFFFF"
header="Permit
No" display="yes" width="70" select="yes">
<cfgridcolumn name="sortorder" bgcolor="##FFFFFF"
header="SortOrder" display="yes" WIDTH="62" select="yes">
</cfgrid>
<div align="center">
<cfINPUT TYPE="submit" VALUE="Save My Changes"
NAME="savemychanges"
>
</div>
</cfform>
</cfoutput>
This is GridTest2.cfm
Form fields:
<cfoutput>[#form.fieldnames#]</cfoutput>
Form values:
<cfloop list="#form.fieldnames#"
index="idx"><cfoutput>#idx# =
#Evaluate(idx)#</cfoutput>
</cfloop>
<cfif isdefined ("form.savemychanges")>
<cfgridupdate grid="mygrid" datasource = "divwt"
tablename =
"tankerpermits" keyonly="yes" >
</cfif>
<cfoutput>
form.#__CFGRID__GETSTUFF__MYGRID#.original.#permitno#
</cfoutput>
Output from TestGrid2.cfm reflects a �funny
looking� grid name and I
can see in the output that Permitno is definitely a defined
field.
Form fields:
[ID,CUSTOMERNO,SAVEMYCHANGES,__CFGRID__GETSTUFF__MYGRID]
Form values:
ID = 13
CUSTOMERNO = 21691
SAVEMYCHANGES = Save My Changes
__CFGRID__GETSTUFF__MYGRID = __CFGRID__EDIT__=3 id N Permitno
Y
sortorder Y 1 U 571 z
Element __CFGRID__GETSTUFF__MYGRID.ORIGINAL.PERMITNO is
undefined in
FORM.
The error occurred in
C:\cmudintranet\Purple\divwt\bftankertruck\gridtest2.cfm:
line 147
#form.__CFGRID__GETSTUFF__MYGRID.original.permitno#
Thanks in AdvanceLorna, be careful. This could cause your comments
to stop working. Blog comments are
sensitive..................
.......... Lorna says ................................................
Allyson, your precaution comes on the heels of me realizing that if I put a song on a blog summary page, then I will have to edit the .js file every time I add a blog entry.
Whereas MassReplaceIt could solve the problem there, the added issue of problems with comments is enough to make me stay away, so that is what I will do: No music within 250' of the blog guy.
Lorna in Southern California -
QM action not allowed for DTP requests in master data and Text tables
Hi,
I have a master data object load request which has failed, returned error in st22 and job finished.
BUT the request has not turned red in the monitor - it's still yellow. That means that I can not delete request nor start new load to infoprovider because it believes a request is still running. But it's not, I've checked both sm37, sm50 etc.
When trying to manually change QM status to 'red' it says 'QM action not allowed for DTP requests in master data and Text tables'
How can I force QM status to red so that I can move on?
Running NW2004s BI (7.0) Patch 15.
I searched for this question but there is no answer
Thank youFolks
I know how frustrating this problem is even in netweaver 7.0 environment. I found a solution for this problem atlast and it works but a not direct way of resolving this issue.
When this request is in yellow status and not able to change / delete the request, its actually in a pseudo status and it is a bug in the program. This request sits in table RSBKREQUEST with processing type as 5 in data elements USTATE, TSTATE and this 5 is actually "Active" status which is obviously wrong.
All we need is, ask your basis person to change the status to 3 in both these data elements and then it allows to reload the delta. Once the delta is successfully loaded, you can delete the previous bad request even though it is still in yellow. Once the request is deleted, the request status gets updated as "4" in table RSBKREQUEST.
Hope this helps.
Thanks
Maybe you are looking for
-
I am getting an error message when I try to burn a cd
I am getting an eror message when I try to burn a cd of an iTunes playlist. The number that came up was 4310. Help!
-
Please inform how to extract the purchase and VAT data from the system .
-
Corporate icons have vanished on my new MacBook Pro toolbar
Help, as I'm populating my toolbar on my new Macbook Pro I get all the names of he sites but not the less space consuming icons. Help!
-
Can't cut and paste while in editing mode
While I am actually in editing mode within InContext, I can't seem to cut/paste a line from one paragraph and add it to another. I can cut the line but not paste. I have gotten the below window, but even ctrl-v doesn't work. I can cut and paste from
-
When symbian belle updation come for nokia 500
.. plz.. i want to know when symbian belle updation come for nokia 500