Multiple adjustments on single brush mask?

Can multiple adjustment effects be recorded for the single brush/mask? e.g. I want to use the same brush/mask to adjust both brightness and clarify. If this is not a feature, it's difficult to work around it because I have to construct the mask all over again, and then maintain more than one if I decide to do more masking. In cases where I truly want different masks, I'll use a separate brush layer.

>Can multiple adjustment effects be recorded for the single brush/mask?
Yes. You can toggle between "simple" and "advanced" mode using the small "on/off" button when the tool is active.
In advanced mode you can blend all the available effects as you like - both with brush and with gradient tool.
If you go from advanced back to simple mode - you can even with one slider reduce or increase your blend of effects.
Very useful.
Brgds,
Henrik Bach

Similar Messages

Mask multiple movieclips from single mask

Hi,
h have big movieclip 450X350 and there are many small thumbnails i need to mask those from big movieclip, I need to animate those so that i can't put those in a single movieclip, Is it possible to mask multiple movieclips from single movieclip...?

If you want to mask them using Actionscript then you should be able to place them inside a movieclip/sprite as separate animations/movieclips and then assign the mask to the container.
You can mask multiple layers under one layer if you use the timeline

Scanning multiple pages into single document

Is there a way to scan multiple pages into single document? I am using the following: HP pavilion laptop with windows 8, HP photosmart C6380 all in one printer scanner copier.

Hi,
Please try
Double click printer icon on desktop,
Select Scan a Document or Photo,
Put the first page on the glass (face down),
Check options (size, dpi ...), and select Scan document to file,
Click Scan - machine will scan the first page
Remove the first page on the glass, put the second page,
Click + (plus sign) It sits on the left hand side of a red x
Machine will scan the second page, put 3rd page on the glass and click + again ..... to the end then click Save
Click Done after Save
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problem in Loading Multiple image in Single Sprite/MovieClip

Hi All,
I am having a killing problem in loading multiple images in single movie clip/sprite using a separate class.
Here is the ImageLoader.as class
package com.project.utils{
 import com.project.*;
 import com.project.utils.*;
 import flash.events.EventDispatcher;
 import flash.display.MovieClip;
 import flash.events.Event;
 import flash.events.ProgressEvent;
 import flash.display.Loader;
 import flash.events.IOErrorEvent;
 import flash.net.URLLoader;
 import flash.events.MouseEvent;
 import flash.net.URLRequest;
 import flash.display.Bitmap;
 public class ImageLoader extends EventDispatcher {
 public var imgloader:Loader;
 public var imgMc:MovieClip;
 public var imgObject:Object;
 public var loaded:Number;
 public function ImageLoader():void {
 imgMc = new MovieClip();
 imgObject = new Object();
 imgloader = new Loader();
 public function loadImage(imgHolder:MovieClip, imgObj:Object):void {
 imgMc = new MovieClip();
 imgObject = new Object();
 imgloader = new Loader();
 imgMc = imgHolder;
 imgObject = imgObj;
 imgloader.contentLoaderInfo.addEventListener(Event.COMPLETE,onImgLoad);
 imgloader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onImgLoadProgress);
 imgloader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR,onImageLoadFailed);
 imgloader.load(new URLRequest(imgObj.FilePath));
 private function onImgLoad(Evt:Event):void {
 var image:Bitmap = Bitmap(Evt.target.content);
 try {
 imgMc.removeChildAt(0);
 } catch (error:Error) {
 imgMc.addChild(image);
 try {
 if (imgObject.URL != undefined) {
 imgMc.buttonMode = true;
 imgMc.removeEventListener(MouseEvent.CLICK, onImageClicked);
 imgMc.addEventListener(MouseEvent.CLICK, onImageClicked);
 } catch (err:Error) {
 dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD"));
 private function onImageClicked(evt:MouseEvent):void {
 trace("Image Attrs:"+imgObject.URL +" Target "+imgObject.Target);
 private function onImgLoadProgress(Evt:ProgressEvent):void {
 if (Evt.bytesLoaded>0) {
 loaded = Math.floor((Evt.bytesLoaded*100)/Evt.bytesTotal);
 dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_PROC",loaded));
 private function onImageLoadFailed(Evt:IOErrorEvent):void {
 trace("Image Loading Failed");
 dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_FAIL"));
Here I am loading some images using the above class in a for loop, like
 for (var i=0; i < 3; i++) {
 //imgLoader=new ImageLoader;
 imgLoader.addEventListener("CustomEvent.ON_IMGE_LOAD",onImageLoad);
 var target:MovieClip=videolist_mc["list" + mcCount + "_mc"];
 target.list_mc.visible=false;
 var imgObj:Object=new Object;
 imgObj.FilePath=list[i].Thumbnail;
 imgObj.Url=list[i].Url;
 imgObj.Target=list[i].Target;
 target.list_mc.urlObj=new Object ;
 target.list_mc.urlObj=imgObj;
 imgLoader.loadImage(target.list_mc.imgholder_mc,imgObj);
 target.list_mc.lable_txt.htmlText="" + list[i].Label + "";
 target.list_mc.imgholder_mc.buttonMode=true;
 target.list_mc.imgholder_mc.addEventListener(MouseEvent.CLICK,onItemPressed);
 mcCount++;
In this case, the ImageLoader.as works only on the last movie clip from the for loop. For example, if i am trying to load three image in three movie clips namely img_mc1,img_mc2 and img_mc3 using the for loop and ImageLoader.as, I am getting the image loaded in the third movie clip only img_mc.
See at the same time, If i uncomment onething in the for loop that is
//imgLoader=new ImageLoader;
its working like a charm. But I know creating class objects in a for loop is not a good idea and also its causes some other problems in my application.
So, help to get rid out of this problem.
Thanks
-Varun

package com.project.utils{
 import com.project.*;
 import com.project.utils.*;
 import flash.events.EventDispatcher;
 import flash.display.MovieClip;
 import flash.events.Event;
 import flash.events.ProgressEvent;
 import flash.display.Loader;
 import flash.events.IOErrorEvent;
 import flash.net.URLLoader;
 import flash.events.MouseEvent;
 import flash.net.URLRequest;
 import flash.display.Bitmap;
 public class ImageLoader extends EventDispatcher {
 public var imgloader:Loader;
 public var imgMc:MovieClip;
 public var imgObject:Object;
 public var loaded:Number;
 public function ImageLoader():void {
// better add you movieclip to the stage if you want to view anything added to it.
 imgMc = new MovieClip();
 imgObject = new Object();
 imgloader = new Loader();
 public function loadImage(filepath:String):void {
 imgloader.contentLoaderInfo.addEventListener(Event.COMPLETE,onImgLoad);
 imgloader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onImgLoadPr ogress);
 imgloader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR,onImageLoadF ailed);
 imgloader.load(new URLRequest(filepath));
 private function onImgLoad(Evt:Event):void {
 var image:Bitmap = Bitmap(Evt.target.content);
 try {
 imgMc.removeChildAt(0);
 } catch (error:Error) {
 imgMc.addChild(image);
 try {
 if (imgObject.URL != undefined) {
 imgMc.buttonMode = true;
 imgMc.removeEventListener(MouseEvent.CLICK, onImageClicked);
 imgMc.addEventListener(MouseEvent.CLICK, onImageClicked);
 } catch (err:Error) {
 dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD"));
 private function onImageClicked(evt:MouseEvent):void {
 trace("Image Attrs:"+imgObject.URL +" Target "+imgObject.Target);
 private function onImgLoadProgress(Evt:ProgressEvent):void {
 if (Evt.bytesLoaded>0) {
 loaded = Math.floor((Evt.bytesLoaded*100)/Evt.bytesTotal);
 dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_PROC",loaded));
 private function onImageLoadFailed(Evt:IOErrorEvent):void {
 trace("Image Loading Failed");
 dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_FAIL"));
Here I am loading some images using the above class in a for loop, like
 for (var i=0; i < 3; i++) {
 var imgLoader:ImageLoader=new ImageLoader();
 imgLoader.addEventListener("CustomEvent.ON_IMGE_LOAD",onImageLoad);
 var target:MovieClip=videolist_mc["list" + mcCount + "_mc"];
 target.list_mc.visible=false;
 var imgObj:Object=new Object;
 imgObj.FilePath=list[i].Thumbnail;
 imgObj.Url=list[i].Url;
 imgObj.Target=list[i].Target;
 target.list_mc.urlObj=new Object ;
 target.list_mc.urlObj=imgObj;
 imgLoader.loadImage(pass the image file's path/name);
 target.list_mc.lable_txt.htmlText="" + list[i].Label + "";
 target.list_mc.imgholder_mc.buttonMode=true;
 target.list_mc.imgholder_mc.addEventListener(MouseEvent.CLICK,onItemPressed);
 mcCount++;

Can we have a multiple TAGS in single line.Pls let me know

Hi Team,
Can we have a multiple TAGS in single line.Ie 2 open tags and 2 close tags in XML..Pls let me know

chk this xml file
<ns0:Test1>
<Address><street>LinkinPark</street><city>Paris</city></Address>
</ns0:Test1>
But I am not sure whether u can have any value for parent node in 7.0 for like node Address... only child nodes can have value..
It can be done in 7.1
Regards,
Syed

How to send multiple attachements in single mail

Hi All,
Currently i am using this function module SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail with only one attachment.
But now i need to send multiple attachments to a single mail.
Can any one please tell me as how to send multiple attachments in single mail.
Thanks in advance.

Hi
See this and do accordingly
Mailing with Attachment by ABAP Coding
Refer this link:
Mail with attachment.
FORM send_list_to_basis .
DATA: w_path LIKE rlgrap OCCURS 0 WITH HEADER LINE,
 lt_index TYPE sy-tabix,
 doc_type(3) TYPE c,
 descr LIKE it_objpack_basis-obj_descr,
 temp_data LIKE w_path,
 temp1 TYPE string,
 tab_lines TYPE i,
 langu(15) TYPE c,
 expirydate TYPE so_obj_edt,
 L_FILE1(100).
CONCATENATE 'C:\' sy-repid '_' sy-datum '.XLS' INTO L_FILE1.
W_PATH-FILENAME = L_FILE1.
APPEND w_path.
CLEAR w_path.
wa_doc_chng-obj_descr = 'User List not logged on for 180 days'.
wa_doc_chng-obj_langu = 'E'.
wa_doc_chng-obj_expdat = sy-datum.
CLEAR w_subject.
CONCATENATE 'Please find attached document with list of users'
 'not logged on for 180 days for client' sy-mandt
 INTO w_subject SEPARATED BY space.
it_objtxt_basis-line = w_subject.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
it_objtxt_basis-line = text-004.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
CLEAR w_tab_line.
DESCRIBE TABLE it_objtxt_basis LINES w_tab_line.
READ TABLE it_objtxt_basis INDEX w_tab_line INTO l_cline.
wa_doc_chng-doc_size =
 ( w_tab_line - 1 ) * 255 + STRLEN( l_cline ).
CLEAR it_objpack_basis-transf_bin.
it_objpack_basis-head_start = 1.
it_objpack_basis-head_num = 0.
it_objpack_basis-body_start = 1.
it_objpack_basis-body_num = w_tab_line.
it_objpack_basis-doc_type = 'RAW'.
APPEND it_objpack_basis.
CLEAR it_objpack_basis.
LOOP AT w_path.
 temp1 = w_path.
 descr = w_path.
 CALL FUNCTION 'STRING_REVERSE'
 EXPORTING
 string = descr
 lang = 'E'
 IMPORTING
 rstring = descr.
 CALL FUNCTION 'STRING_SPLIT'
 EXPORTING
 delimiter = '\'
 string = descr
 IMPORTING
 head = descr
 tail = temp_data.
 CALL FUNCTION 'STRING_REVERSE'
 EXPORTING
 string = descr
 lang = 'E'
 IMPORTING
 rstring = descr.
 CALL FUNCTION 'STRING_SPLIT'
 EXPORTING
 delimiter = '.'
 string = descr
 IMPORTING
 head = temp_data
 tail = doc_type.
 CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 filename = temp1
 filetype = 'BIN'
 header_length = 0
 read_by_line = 'X'
 replacement = '#'
 TABLES
 data_tab = it_upload.
 DESCRIBE TABLE it_upload LINES tab_lines.
 DESCRIBE TABLE it_objbin_basis LINES lt_index.
 lt_index = lt_index + 1.
 LOOP AT it_upload.
 wa_objbin_basis-line = it_upload-line.
 APPEND wa_objbin_basis TO it_objbin_basis.
 CLEAR wa_objbin_basis.
 ENDLOOP.
 it_objpack_basis-transf_bin = 'X'.
 it_objpack_basis-head_start = 0.
 it_objpack_basis-head_num = 0.
 it_objpack_basis-body_start = lt_index.
 it_objpack_basis-body_num = tab_lines.
 it_objpack_basis-doc_type = doc_type.
 it_objpack_basis-obj_descr = descr.
 it_objpack_basis-doc_size = tab_lines * 255.
 APPEND it_objpack_basis.
 CLEAR it_objpack_basis.
ENDLOOP.
it_reclist_basis-receiver = '[email protected]'.
it_reclist_basis-rec_type = 'U'.
APPEND it_reclist_basis.
CLEAR it_reclist_basis.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
 EXPORTING
 document_data = wa_doc_chng
 put_in_outbox = 'X'
 commit_work = 'X'
 TABLES
 packing_list = it_objpack_basis
 contents_txt = it_objtxt_basis
 contents_bin = it_objbin_basis
 receivers = it_reclist_basis
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 operation_no_authorization = 4
 OTHERS = 99.
IF sy-subrc EQ 0.
 SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.
ENDFORM. " send_list_to_basis
Reward points for useful Answers
Regards
Anji

SCRIPT TO IMPORT MULTIPLE PLACED IMAGES..AND OUTPUT MULTIPLE IMAGES TO SINGLE PDF.

Anyone got a script to import multiple placed images into CS4? or is this possible in CS5?
and can we output multiple layers into a single PDF in illustrator? Or multiple layers into single JPEGS from illustrator with one command instead of individually saving out each page... would be a huge time saver for me.
Currently I output each completed layer individually and then right click those outputted jpegs in their output folder and choose "combine supported files into acrobat..." to make a single acrobat file..
I`d also like to be able to CTRL click multiple layers and go save as... only those layers get saved out...
And so adding something in the Save for PDF output dialogue box to save layers to multiple pages would be a helpful time saver..

In CS 4 and CS 5 you can drag and drop fro m the finder or the Bridge, and I guess any other similar type viewer, multiple number of image files to a document. You can configure the bridge in such a way as to allow you to see the Bridge and your document at the same time for this very purpose.
If you just drag and drop the files are linked if you drag while holding the shift key then the files will be embedded.
ID and PS CS 5 have a minibridge which works the sam way but is an actually panel and will stay in the front.
I separate the images but they import one on top of another.

10G-form: How to do MULTIPLE WORD OR SINGLE WORD SEARCH at ITEM?

I am using 10G DB + 10G Form Builder.
I've 'database_item' where I am storing multiline text data.
I want to do MULTIPLE WORD OR SINGLE WORD SEARCH at this item through FORM.
I've tried by creating the following NON Database Items on the form:
- multiline_search_text_item, and
- multiline_result__text_item
And then writing execute_query in KEY-NEXT-ITEM trigger.
I've also tried using this in the POST-TEXT-ITEM at multiline_search_text_item:
select table.database_item into :multiline_result__text_item from table where multiline_search_text_item = :multiline_search_text_item;
Pl help me asap.
Gaurav

What you want to do is not clear.
The query you wrote will select records where the table contains exactly what has been written in the search item. You can use LIKE and a wildcard search to find records which contain the search text:
select table.database_item into :multiline_result__text_item
from table
where multiline_search_text_item LIKE '%'||:multiline_search_text_item||'%';
You can use UPPER to make this case insensitive:
select table.database_item into :multiline_result__text_item
from table
where Upper(multiline_search_text_item) LIKE Upper('%'||:multiline_search_text_item||'%');
But I suspect you want either to match the individual words in the search text to individual words in the database multiline field, or find records where the search words appear (not necessarily as whole words). In that case, check out the following:
-- set up a table (multiline and various whitespaces)
DROP TABLE t;
CREATE TABLE t AS
SELECT
ROWNUM rn,
owner||Chr(9)||object_name||Chr(160)||subobject_name||' '||object_id||' '||
data_object_id||Chr(10)||object_type||' '||created||' '||last_ddl_time||' '||
timestamp||' '||status||' '||temporary||' '||generated||' '||secondary AS col
FROM all_objects;
-- check the format of the multiline text item (col)
SELECT * FROM t WHERE ROWNUM < 4;
-- a type for the function below
CREATE TYPE string_tab AS TABLE OF VARCHAR2(255);
-- this function takes a string and cuts out each word, idetifying words
-- as being separated by any whitespace. it returns a collection
CREATE OR REPLACE FUNCTION string_to_tab(
p_string IN VARCHAR2) RETURN string_tab IS
l_string LONG DEFAULT
 RTrim(regexp_replace(p_string,'[[:space:]]+',' ')) || ' ';
l_data string_tab := string_tab();
n NUMBER;
BEGIN
LOOP
 EXIT WHEN l_string IS NULL;
 n := InStr(l_string, ' ');
 l_data.extend;
 l_data(l_data.Count) := LTrim(RTrim(SubStr(l_string, 1, n - 1)));
 l_string := SubStr(l_string, n + 1);
END LOOP;
RETURN l_data;
END string_to_tab;
-- selecting from t where ANY of the words in the search text has
-- a match in the multiline field (as a word or part of a word), so SYS
-- matches to MDSYS and SYSTEM
SELECT DISTINCT
t.rn, t.col
FROM
t,
(SELECT column_value
 FROM TABLE(CAST(string_to_tab('SYS INDEX') AS string_tab))) x
WHERE InStr(t.col,x.column_value) > 0;
-- selecting from t where ALL of the words in the search text has
-- a match in the multiline field (as a word or part of a word), so SYS
-- matches to MDSYS and SYSTEM
SELECT rn, col FROM(
SELECT
t.rn, t.col, cnt_x, Count(*) cnt
FROM
t,
(SELECT column_value , Count(1) over(PARTITION BY 1)cnt_x
 FROM TABLE(CAST(string_to_tab('SYS INDEX') AS string_tab))) x
WHERE InStr(t.col,x.column_value) > 0
GROUP BY t.rn, t.col, cnt_x
WHERE cnt = cnt_x;
-- selecting from t where ANY of the words in the search text
-- match a word in the multiline field, so SYS matches only to SYS
SELECT DISTINCT
t.rn, t.col
FROM
t,
(TABLE(CAST(string_to_tab(t.col) AS string_tab))) t2,
(SELECT column_value
 FROM TABLE(CAST(string_to_tab('SYS INDEX') AS string_tab))) x
WHERE t2.column_value = x.column_value;
-- selecting from t where ALL of the words in the search text
-- match a word in the multiline field, so SYS matches only to SYS
SELECT rn, col FROM(
SELECT
t.rn, t.col, cnt_x, Count(*) cnt
FROM
t,
(TABLE(CAST(string_to_tab(t.col) AS string_tab))) t2,
(SELECT column_value , Count(1) over(PARTITION BY 1)cnt_x
 FROM TABLE(CAST(string_to_tab('SYS INDEX') AS string_tab))) x
WHERE t2.column_value = x.column_value
GROUP BY t.rn, t.col, cnt_x
WHERE cnt = cnt_x;For your application you would replace 'SYS INDEX' with a variable (the search field). You can use upper() and wildcards for case insensitive & 'fuzzy' searches. You might need to modify the function so it removes other delimiters such as commas and colons.

Create multiple rule in single alert category

Hi All,
any body tell me can we create multiple rule in single alert category.When i click on a add rule button in existing category nothing will happen same page will come with existing data.
Thanks & Regards
Samarjit

HI,
you can define alert category multiple rules.. see the below links
http://help.sap.com/saphelp_nw2004s/helpdata/en/bb/f0033c128f4a7de10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/23827054604aa8e10000000a11466f/content.htm
You must define the binding from the task container to the rule container for each rule. For further information, refer to Rule Resolution
http://help.sap.com/saphelp_nw2004s/helpdata/en/c5/e4b5aa453d11d189430000e829fbbd/content.htm
Regards
Chilla

RE: Accessing multiple Env from single Client-PC

Look in the "System Management Guide" under connected environments page
72. This will allow services in your primary environment to find
services in your connected environment. However, there is a bug
reported on this feature which is fixed in 2F4 for the HP and H1 for all
other servers. The following is from Forte:
The connected environments bug that was fixed in 2F4 is #24282. The
problem
was in the nodemgr/name server source code and caused the following to
occur:
Service1 is in connected envs A and B.
Client has env A as primary, B as secondary.
Envmgr A dies before the client has ever made a call to Service1.
Afer env A is gone, client makes a call to Service1 which causes Envmgr
B to
seg fault.
You should upgrade your node manager/env manager nodes to 2F4. The 2F2
development and runtime clients are fully compatible with 2F4 servers.
Kal Inman
Andersen Windows
From: Inho Choi[SMTP:[email protected]]
Sent: Monday, April 21, 1997 2:04 AM
To: [email protected]
Subject: Accessing multiple Env from single Client-PC
Hi, All!
Is there anybody has any idea to access multiple environments from
single client-PC? I have to have multiple environments because each
environment resides geographically remote node and network bandwidth,
reliability are not good enough to include all the systems into single
environment.
Using Control Panel for doing this is not easy for those who are not
familiar with Windows. The end-user tend to use just single application
to access all necessary services.
I could consider two option to doing this:
1. Make some DOS batch command file to switch different environment
like, copying back/forward between environment repositories and
set up forte.ini for changing FORTE_NS_ADDRESS. After then, invoke
proper client partition(ftexec).
2. Duplicate necessary services among each environment.
But, these two options have many drawbacks in terms of system
management(option 1), performance(option 2) and others.
Has anybody good idea to implement this? Any suggestion would be
appreciated.
Inho Choi, Daou Tech., Inc.
email: [email protected]
phone: +82-2-3450-4696

Look in the "System Management Guide" under connected environments page
72. This will allow services in your primary environment to find
services in your connected environment. However, there is a bug
reported on this feature which is fixed in 2F4 for the HP and H1 for all
other servers. The following is from Forte:
The connected environments bug that was fixed in 2F4 is #24282. The
problem
was in the nodemgr/name server source code and caused the following to
occur:
Service1 is in connected envs A and B.
Client has env A as primary, B as secondary.
Envmgr A dies before the client has ever made a call to Service1.
Afer env A is gone, client makes a call to Service1 which causes Envmgr
B to
seg fault.
You should upgrade your node manager/env manager nodes to 2F4. The 2F2
development and runtime clients are fully compatible with 2F4 servers.
Kal Inman
Andersen Windows
From: Inho Choi[SMTP:[email protected]]
Sent: Monday, April 21, 1997 2:04 AM
To: [email protected]
Subject: Accessing multiple Env from single Client-PC
Hi, All!
Is there anybody has any idea to access multiple environments from
single client-PC? I have to have multiple environments because each
environment resides geographically remote node and network bandwidth,
reliability are not good enough to include all the systems into single
environment.
Using Control Panel for doing this is not easy for those who are not
familiar with Windows. The end-user tend to use just single application
to access all necessary services.
I could consider two option to doing this:
1. Make some DOS batch command file to switch different environment
like, copying back/forward between environment repositories and
set up forte.ini for changing FORTE_NS_ADDRESS. After then, invoke
proper client partition(ftexec).
2. Duplicate necessary services among each environment.
But, these two options have many drawbacks in terms of system
management(option 1), performance(option 2) and others.
Has anybody good idea to implement this? Any suggestion would be
appreciated.
Inho Choi, Daou Tech., Inc.
email: [email protected]
phone: +82-2-3450-4696

Accessing multiple Env from single Client-PC

Hi, All!
Is there anybody has any idea to access multiple environments from
single client-PC? I have to have multiple environments because each
environment resides geographically remote node and network bandwidth,
reliability are not good enough to include all the systems into single
environment.
Using Control Panel for doing this is not easy for those who are not
familiar with Windows. The end-user tend to use just single application
to access all necessary services.
I could consider two option to doing this:
1. Make some DOS batch command file to switch different environment
like, copying back/forward between environment repositories and
set up forte.ini for changing FORTE_NS_ADDRESS. After then, invoke
proper client partition(ftexec).
2. Duplicate necessary services among each environment.
But, these two options have many drawbacks in terms of system
management(option 1), performance(option 2) and others.
Has anybody good idea to implement this? Any suggestion would be
appreciated.
Inho Choi, Daou Tech., Inc.
email: [email protected]
phone: +82-2-3450-4696

Hi, All!
Is there anybody has any idea to access multiple environments from
single client-PC? I have to have multiple environments because each
environment resides geographically remote node and network bandwidth,
reliability are not good enough to include all the systems into single
environment.
Using Control Panel for doing this is not easy for those who are not
familiar with Windows. The end-user tend to use just single application
to access all necessary services.
I could consider two option to doing this:
1. Make some DOS batch command file to switch different environment
like, copying back/forward between environment repositories and
set up forte.ini for changing FORTE_NS_ADDRESS. After then, invoke
proper client partition(ftexec).
2. Duplicate necessary services among each environment.
But, these two options have many drawbacks in terms of system
management(option 1), performance(option 2) and others.
Has anybody good idea to implement this? Any suggestion would be
appreciated.
Inho Choi, Daou Tech., Inc.
email: [email protected]
phone: +82-2-3450-4696

How to attach Multiple attachments to single mail

How to attach multiple pdfs to single mail ?
or
how to attach one pdf & One excel & One word document to single mail ?
Thanks In Advance

Hello Karunya,
Please refer to the link below.
https://wiki.sdn.sap.com/wiki/display/Snippets/Send%20email%20with%20multiple%20zipped%20attachments
Regards,
P Bansal

How to print multiple pages in single spool in smartforms

Hi all,
I have a issue on to print multiple pages in single spool,i can able to print multiple pages in multiple spool .I am doing Check Print smartforms in that i need to print Multiple pages in single spool.Currently i am using the below code please help to solve this issue.
IF gv_tabix = 1.
lwa_outp_option-tdnewid = 'X'.
ELSE.
lwa_outp_option-tdnewid = ' '.
ENDIF.
Thanks,
Deesanth

Hi
TABLES: spfli.
DATA:
t_spfli type STANDARD TABLE OF spfli.
DATA:
fs_spfli TYPE spfli.
DATA:
w_form TYPE tdsfname,
w_flag TYPE i,
f_nam TYPE rs38l_fnam,
w_input TYPE ssfcompin,
w_control TYPE ssfctrlop.
SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME.
SELECT-OPTIONS s_carrid FOR spfli-carrid.
SELECTION-SCREEN END OF BLOCK blk .
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME.
PARAMETERS:
p_single RADIOBUTTON GROUP rad1,
p_ind RADIOBUTTON GROUP rad1.
SELECTION-SCREEN END OF BLOCK block1.
START-OF-SELECTION.
PERFORM display_data.
PERFORM ssf_function_module_name.
PERFORM spool_request.
*& Form display_data
* text
* --> p1 text
* <-- p2 text
FORM display_data .
SELECT * FROM spfli INTO TABLE t_spfli WHERE carrid IN s_carrid.
ENDFORM. " display_data
*& Form ssf_function_module_name
* text
* --> p1 text
* <-- p2 text
FORM ssf_function_module_name .
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING formname = ' '
IMPORTING fm_name = f_nam
EXCEPTIONS no_form = 1
no_function_module = 2.
* IF sy-subrc NE 0.
* MESSAGE 'Form cannot be displayed' TYPE 'E' .
* ENDIF. " IF sy-subrc eq 0
ENDFORM. " ssf_function_module_name
*& Form spool_request
* text
* --> p1 text
* <-- p2 text
FORM spool_request .
w_input-dialog = 'X'.
CALL FUNCTION 'SSFCOMP_OPEN'
EXPORTING input = w_input
EXCEPTIONS error = 1.
*" LOOP AT t_spfli .....................................................
LOOP AT t_spfli INTO fs_spfli.
w_control-no_open = ' '.
w_control-no_close = ' '.
*"Single spool request..................................................
IF p_single EQ 'X'.
w_control-no_open = 'X'.
w_control-no_close = 'X'.
ELSE.
*"Individual spool request.............................................
IF w_flag NE '1'.
w_control-no_open = 'X'.
w_control-no_close = ' '.
w_flag = 1.
CALL FUNCTION ' '
EXPORTING control_parameters = w_control
fs_spfli = fs_spfli
EXCEPTIONS formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4.
endif. " IF w_flag ne '1'
ENDIF. " IF p_single eq 'X'.
CALL FUNCTION ' '
EXPORTING
control_parameters = w_control
fs_spfli = fs_spfli
EXCEPTIONS formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4.
ENDLOOP. " LOOP at t_spfli into ...
*&This function module close the spool request *
CALL FUNCTION 'SSFCOMP_CLOSE'
EXCEPTIONS error = 1.
ENDFORM. " spool_request
Regards,
Sravanthi

How To Use Multiple Currencies in single payroll ........

Dear All
Can you help me How To Use Multiple Currencies in single payroll?
with regards
User600722

I am not a functional expert. but ML Note 150173.1 (which is quite old) states that this is not possible.
Srini

Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?

Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?
My client requirement is process 100 files from biztalk with in 5 min ,actually it is taking 20 min .
So I decided to created same instance of the application with multiple time in BTS admin console ,as I understand biztalk admin console never allow to install same
schema’s with multiple time .
Any help can be appreciate ..

BizTalk will automatically process multiple messages on separate threads so you may need to tune your system. The following link should get you started:
http://social.technet.microsoft.com/wiki/contents/articles/7801.biztalk-server-performance-tuning-optimization.aspx
Another possibility is to set the Batch Size property on your receive location if the adapter uses batch size to determine how messages are picked up. As an example, it you want the MSMQ adapter to immediately pick up messages and start
to process them, set the batch size to 1.
You may also need to distribute the processing across multiple BizTalk servers by installing BizTalk on additional servers and joining the existing BizTalk group.
David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful.

Multiple adjustments on single brush mask?

Similar Messages

Maybe you are looking for