Multiple alerts in PO single stack

Hi all,
I am working on PI single stack, PO 7.40
I have multiple interfaces. The functional owner of MM, SD interfaces are different.
I am doing Component Based Message Alerting.
I want to send mails to SD functional consultant for errors in SD interfaces and I have to send mails to MM consultant for errors in MM interfaces. For all these interfaces I have to give cc to one another person also. How can I achieve this?
When I go to NWA, Operations -> Jobs -> Java Scheduler -> Job Definitions
I have the option to add a sender mail id only. That mail id is specific to all interfaces.
Can I add this email id for respective interfaces? How can I incorporate my requirement here?
Regards
Harish

Hi Harish,
It's Possible.
Please check the reply given by Hareesh Gampa in this thread New Alert consumer in PI 7.31 dual stack.
Regards,
Suhale Shaik.

Similar Messages

Customization of Alert Mails in Single stack using SolMan via CBMA method

Hello All,
I have created alerts for error messages making use of SolMan via CBMA method. But the contents of the mail are not too informative.
It sends an html file attached to the notification mail. I have provided the screenshot of that html file's content. As you can see, the contents of the html file is not much helpful. Kindly let me know how we can customize this html file.
I need that html file to contain the name of ICO.
Thanks in advance,
Ajeya G V

Hi Ajeya,
The below blog might help
Customize Alerts Using Job in PI 7.31/PO
Customize E-Mail Body and Subject in Alerts in SAP PI 7.31 – Java Stack Only – Part 1 – ESR
Customize E-Mail Body and Subject in Alerts in SAP PI 7.31 – Java Stack Only – Part 2 – ID
regards,
Harish

Multiple Alerts for Single error in interface is a design not issue with XI

Hi,
This is constraint of alert mechanism in XI.
You get multiple alerts for single error,the reason is that since XI will try multiple times to process a failed message so each time it fails in its tries it will send an e-mail.to stop this the "Suppress multiple alert" box is checked but what it does is that it stops all the alerts of that specific rule until the first one is confirmed.Personally i myself (and other experts too) suggest to leave the box unchecked coz its better to get tons of mails for a specific error rather than not getting any e-mail and thereby wasting time in tracking/solving the issue resulting in revenue loss to client.
As per above comments is it possible to write an ABAP code so that we can stop multiple alerts to be sending to inbox. I am sure if we can delete message from some table then we can stop sending multiple messages to alert inbox and to the subsequent mail id also. I am not sure how alert being generated. I know where they get logged in this table sxmsalertlogger. If someone know how it works in background please let me know the table names.
Regards
Ria

Hi Gaurav,
You can personalize the way in which you receive alerts.
Simply choose Personalization to make individual settings for your alert inbox. You can determine a substitute who will then receive the alerts. In addition, you can choose whether alerts are sent to you time-independently or time-dependently. The default setting is that alerts are sent time-independently to your alert inbox and via e-mail when they occur. You can additionally select the communication methods FAX and SMS for time-independent alert notification.
If you want to receive alerts only on certain days for a certain time, simply select the option for time-dependent sending of alerts and choose Create to create a new table entry. You can then choose the corresponding factory calendar, the time interval, and communication channel. Alerts that arise during this time frame will be sent in any case to your alert inbox. If you have also selected other communication channels, the alerts are additionally sent to you using these other channels.
This above text is from SAP help, do you think by changing anything in personnalisation i can stop multiple alerts. I have some issue with Personalisation link so was wondering would be worth to get tht personalisation issue resolved.
Regards
Ria

How to calculate the individual sums of multiple columns in a single query

Hello,
Using Oracle 11gR2 on windows 7 client. I have a question on calculating sum() on multiple columns on different columns and store the results in a view. Unfortunately I could not post the problem here as it keeps on giving error "Sorry, this content is not allowed", without telling where or what it is! So I had to post it in the stack-overflow forum, here is the link: http://stackoverflow.com/questions/16529721/how-to-calculate-the-individual-sums-of-multiple-columns-in-a-single-query-ora
Will appreciate any help or suggestion.
Thanks

user13667036 wrote:
Hello,
Using Oracle 11gR2 on windows 7 client. I have a question on calculating sum() on multiple columns on different columns and store the results in a view. Unfortunately I could not post the problem here as it keeps on giving error "Sorry, this content is not allowed", without telling where or what it is! So I had to post it in the stack-overflow forum, here is the link: http://stackoverflow.com/questions/16529721/how-to-calculate-the-individual-sums-of-multiple-columns-in-a-single-query-ora
Will appreciate any help or suggestion.
ThanksLooks like you want a simple group by.
select
          yr
     ,      mnth
     ,      region
     ,     sum(handled_package)
     ,     sum(expected_missing_package)
     ,     sum(actual_missing_package)
from test
group by
     yr, mnth, region
order by
     yr, mnth, region;I wouldn't recommend storing your data for year / month in 2 columns like that unless you have a really good reason. I would store it as a date column and add a check constraint to ensure that the date is always the first of the month, then format it out as you wish to the client.
CREATE TABLE test
     year_month                              date,
    Region                     VARCHAR2(50),
    CITY                       VARCHAR2(50),
    Handled_Package            NUMBER,
    Expected_Missing_Package   NUMBER,
    Actual_Missing_Package     NUMBER
alter table test add constraint firs_of_month check (year_month = trunc(year_month, 'mm'));
ME_XE?Insert into TEST (year_month, REGION, CITY, HANDLED_PACKAGE, EXPECTED_MISSING_PACKAGE, ACTUAL_MISSING_PACKAGE)
2 Values (to_date('2012-nov-12', 'yyyy-mon-dd'), 'Western', 'San Fransisco', 200, 10, 5);
Insert into TEST (year_month, REGION, CITY, HANDLED_PACKAGE, EXPECTED_MISSING_PACKAGE, ACTUAL_MISSING_PACKAGE)
ERROR at line 1:
ORA-02290: check constraint (TUBBY.FIRS_OF_MONTH) violated
Elapsed: 00:00:00.03
ME_XE?Insert into TEST (year_month, REGION, CITY, HANDLED_PACKAGE, EXPECTED_MISSING_PACKAGE, ACTUAL_MISSING_PACKAGE)
2 Values (to_date('2012-nov-01', 'yyyy-mon-dd'), 'Western', 'San Fransisco', 200, 10, 5);
1 row created.
Elapsed: 00:00:00.01
ME_XE?select
2        to_char(year_month, 'fmYYYY')    as year
3     , to_char(year_month, 'fmMonth')   as month
4     , Region
5     , CITY
6     , Handled_Package
7     , Expected_Missing_Package
8     , Actual_Missing_Package
9 from test;
YEAR         MONTH                REGION                         CITY                    HANDLED_PACKAGE EXPECTED_MISSING_PACKAGE ACTUAL_MISSING_PACKAGE
2012         November             Western                        San Fransisco                       200                       10                      5
1 row selected.
Elapsed: 00:00:00.01
ME_XE?Then you have nice a nice and easy validation that ensures you data integrity.
Cheers,

How to track the Inbound child IDOcs in PI 7.4 Single stack

Hi Friends,
I would like to know the procedure of tracking the Inbound child IDocs in PI 7.4 Single stack.
Here is the detailed description.
Say we are getting the data from third party system and the message may have multiple IDOcs in it. The message has processed successfully from PI and reached to the target system(ERP). So, now my question is how to track the IDOc count with in that message.
Please suggest on the same.
Thanks in Advance,
Venkateswarlu.

Hi Hareesh,
Thanks for your inputs. According to the link IDOC Status, Tracking in SAP PI/PO Single Stack I am thinking the required funcionality is not there in PO 7.4, but still i would like to have little more clarity before moving further.
I will explain what what was happening in PI 7.11 so that you can understand what i am looking for in PO 7.4.
We will get the data from third party system in xml format, we had to search for the messages based on interface name and time range within SXMB_MONI. After getting the result(say the output is 100 messages), we will download the values of "Outbound Reference" field(which is a key to find the child messages for messages resulting in an Interface Collection). Below is the snap of Outbound Reference field for your reference.
Now we will go to the table IDXRCVPOR in SE16(within PI) and put the values of Outbound Reference field in Text 24 and execute. Here we will get all the child messages.
Now please let me know if this kind of scenario is possible in PO 7.4.
Thanks,
Venkat.

Single stack vs. Dual Stack - Why does SAP recommend single stack?

Hello SAP,
I am a business partner who specializes in infrastructure consulting for SAP solutions. The SAP Consultants I am working with recently have been recommending that customers install single stack systems. I would like to know why? Are there problems with dual stack systems? Is SAP changing things in a later release and they want customers to be prepared for the change?
From an infrastucture point of view this recommendation combined with SAP NetWeaver architecture will result in an explosion of SID names which leads to an explosion of application server instances and DBMS instances and an explosion of installed servers. I know it is possible to combine SIDs into a single DBMS using MCOD and to have multiple application servers in a single physical server, but there are issues with mulitple application server instances and MCOD use which make normal maintenance operations difficult.
I think it would be much better for customers to install dual stack systems and simply adjust the SAP profile parameters to disable one stack or the other. This way, you could still have 1 stack per application server instance and you would not be have to be creative with SAP SID names!!! Creating a DBMS instance or installing an additional server is not a simple nor economical proposition.
Regards,
Zaz

I am a business partner who specializes in infrastructure consulting for SAP solutions. The SAP Consultants I am working with recently have been recommending that customers install single stack systems. I would like to know why? Are there problems with dual stack systems?
The problems are:
- difficult to size and maintain - Java + ABAP will fight for resources (memory,CPU) and there´s not much one can do to tune if either ABAP or Java as dual stack instance on a single box is running nuts (for whatever reason).
- System copies via R3load - if you want to copy a huge system (let´s say ERP 6.0 + Java stack) you need to use sapinst + R3load to do the copy. Imagine if the system is 1 TB or bigger, this is very time consuming
- Upgrades are complicated - if you upgrade a dual stack system you need to run two PREPARES and two upgrades at the same time - there are sync points each upgrade wait for the other to finish --> difficult to plan in sense of runtimes and even more notes/preparation to do (a dual stack SolMan upgrade from 3.2 to 4.0 had almost 100 notes (technical!) and two upgrade preparation guides...)
- interdependencies - example: you run ERP + EP + BI-Java on one system. You upgrade your BI (which is on a different box) to a new support package. Since the BI-Java need to be in sync with the BI ABAP support package you need to upgrade the EP too - and since there´s a direct dependency (doublestack system) you will need to install support packages on your ERP. So you finally end up in having dependency chains that a total different system (BI) will force you to upgrade/patch your ERP. And if you have e. g. a CRM connected to the same EP you will need to patch that too...
Is SAP changing things in a later release and they want customers to be prepared for the change?
No - the possibility of having a dual stack installation will be still there.
From an infrastucture point of view this recommendation combined with SAP NetWeaver architecture will result in an explosion of SID names which leads to an explosion of application server instances and DBMS instances and an explosion of installed servers. I know it is possible to combine SIDs into a single DBMS using MCOD and to have multiple application servers in a single physical server, but there are issues with mulitple application server instances and MCOD use which make normal maintenance operations difficult.
I agree - MCOD is not a good solution for this problem.
I think it would be much better for customers to install dual stack systems and simply adjust the SAP profile parameters to disable one stack or the other. This way, you could still have 1 stack per application server instance and you would not be have to be creative with SAP SID names!!! Creating a DBMS instance or installing an additional server is not a simple nor economical proposition.
There are 36 * 36 * 36 (minus a few reserved) names for SIDs- this should be enough - also for the biggest customers
Of course one could install both and disable the one you don´t need - but this won´t help in dependency thing. If you e. g. install a dual stack instance for CRM and disable the Java part, you can nicely run it. In case of an upgrade, you will need to upgrade the Java part too (see above) although you don´t use it. The upgrade will detect the doublestack and wait for the java instance to be upgraded too. Same is true vice versa. And believe me: you don´t want that
In fact it is better to separate - that´s at least our experience. The main no-go for such a configuration on our side was the dependency thing. Since they are there and you can´t do much about them we decided to have a 1:1 relationship for ABAP backend and Java "frontend". You will get more instances (and names and databases) but you can patch applications independently from each other. So an implementation of a BI patch won´t imply that you finally also patch your ERP production and other systems that connect to that portal.
There are virtualization techniques available to not need more boxes, you can consolidate them on one machine as if you were installing a dual stack so that is not really an issue. This depends, of course, on the platform and database you use (e. g. Oracle does not support production installations in VMWare). We use for our Java instances Solaris on Opteron (or Intel 64bit) and zones/containers and for the ABAP part we use Linux + Xen. Both virtualization methods come with the OS (so no additional $$$) and both are supported by SAP.
The propagated advantage of having a dual stack installation (shared memory access etc.) is so small that it doesn´t outban the additional complexity - which is definitely there.
I hope those arguments will help to understand SAPs (and the consultants) position - get back if you want more
Markus

Multiple adjustment layers vs. multiple effects on a single adj. layer

I posted this earlier on the Creative Cow forums, and came back with inconclusive answers...
If I have the exact same clip in 2 separate comps...In Comp 1 I have 5 color correction effects on a single adjustment layer, and in Comp 2 I have 5 adjustment layers with the same effects, 1 effect each spread over the 5 adjustment layers (in the same order). Should I theoretically expect to get the exact same image in both comps?
Here's the reason I'm asking. I'm doing some color correction that occasionally involves a lot of keying, which I'm doing in Colorista II. It's not green/blue screen keying, it's keying the shot footage for adjustment, e.g. skin tones, backgrounds, blown-out highlights, etc. I'm finding that in order for the Colorista II keyer to work based on previous instances of effects calculations (i.e. Levels, Hue/Sat, or other Colorista instances, all of which occur *before* the key) I'm having to put it on another Adjustment Layer for the keyer to take the earlier effects into account. Otherwise, if it's on the same adjustment layer, the Colorista keyer disregards the previous effects & uses the un-effected clip as the source for the key.
I don't know if this is just the way the Colorista II keyer works, or if this is a global After Effects-wide order-of-operations thing that I don't fully have a handle on. I understand order of operations, and that Adjustment Layers affect all layers below it, and all that stuff. My question is, what (if anything) is the difference in behavior between multiple effects on a single adjustment layer vs the same effects spread out over multiple adjustment layers? Is it predictable & consistent? Or is it just common knowledge (to everyone else but me) that sometimes you have to use multiple adjustment layers based on the specific effect combinations that you're using?

I don't know if this is just the way the Colorista II keyer works, or if this is a global After Effects-wide order-of-operations thing that I don't fully have a handle on.
As far as I understand the SDK, it is not considered practical, since it would require a plug-in to establish its own comp buffer outside the main rendering pipeline, which could lead to issues with color consistency and things like premultiplied vs. straight Alpha. I also seem to remember that as of CS5 it is actually no longer technically possible. Hence effects that use specific source footage API calls will bypass any previous effects and directly operate on the source.
My question is, what (if anything) is the difference in behavior between multiple effects on a single adjustment layer vs the same effects spread out over multiple adjustment layers? Is it predictable & consistent?
The result should be the same under all circumstances, assuming all adjustment layers have the same opacity and no masks and their stacking order is equal. Only when you apply masks or adjust the opacity to fade specific adjustments you will see differences. It is also to note that having all effects might be a bit faster and more efficient, since less data is passed from buffer to buffer...
Mylenium

Can there be multiple ASM instances on single node?

Hi,
Can there be multiple ASM instances on single node?
This one says No : http://www.freelists.org/archives/oracle-l/02-2008/msg00317.html
And This one says Yes : http://www.databasejournal.com/features/oracle/article.php/3571371
Thanks in advance.
Thanks,
Harsha
Edited by: user498756 on Sep 11, 2008 2:23 AM

...that document doesnt say you cannot have multiple ASM instances on a node. It says "...ASM, +you only need one ASM+ instance for that computer, to manage the two database instances that use ASM."
The fact that you only need one - and I cannot think of a good reason to have more than one - does not preclude the fact that you do seem to be able to have multiple ASM instances on a single node, each looking after its own set of disks and diskgroups.
Again - I cannot think of a good reason to do so though!
-Bob

How To Concatenate Column Values from Multiple Rows into a Single Column?

How do I create a SQL query that will concatenate column values from multiple rows into a single column?
Last First Code
Lesand Danny 1
Lesand Danny 2
Lesand Danny 3
Benedi Eric 7
Benedi Eric 14
Result should look like:
Last First Codes
Lesand Danny 1,2,3
Benedi Eric 7,14
Thanks,
David Johnson

Starting with Oracle 9i
select last, first, substr(max(sys_connect_by_path(code,',')),2) codes
from
(select last, first, code, row_number() over(partition by last, first order by code) rn
from a)
connect by last = prior last and first = prior first and prior rn = rn -1
start with rn = 1
group by last, first
LAST       FIRST      CODES
Lesand         Danny          1,2,3
Benedi         Eric           7,14Regards
Dmytro

Selecting data from Multiple Partitions in a single select stmt.

Hi all,
My Database is very large & my tables are partitioned.
My question is:
1) If my data is spread across multiple partitions, is there any way to select data from multiple partitions in a single query?
If we dont mention partition name also it works fine, but perofmance wise it will be very slow. (Using EXPLAIN PLAN)
(Note:I dont want to make use of Union concept, i want to do it in a single select statement)
For ex:
qry1.sql:
select empno from emp_trans partition (P012000)
This above query(qry1.sql) will work fine.
qry2.sql:
select empno from emp_trans partition (P012000,P022000)
The above query(qry2.sql) will return will return the following error:
ORA-00933: SQL command not properly ended
If anybody has any solution for this, pls mail me immediately.
Thanks in advance
bye
null

All my queries are dynamically generated. All my tables are also indexed partition wise based on date field. My question is, if i want to mention multiple partition names at the time of generating my query(select), then with parformance will be good. I have refered some books, inthat what they say is to use UNION concept, i dont want to use that, instead i want in a single select statement.
Thaks for ur reply
Bye
null

Passing multiple values for a single field in URL to call sap Transaction

Hi All,
I need to pass multiple values for a single field to SAP transaction .
means if i have say a field "Date" which can contain more than one value, <b>but its not a range which has two fields</b> . How is it possible.
Let me know pls.
Regards,
Sirisha.R.S.

Hi Satyajit,
I need to call a transaction with multiple values which gives me the report based on those values.
So I need to pass multiple values for a single parameter.
I hope u got it.
Regards,
Sirisha.R.S.

Any way to pass Multiple Values for a single Label in the Parameter?

I have a Report that Contains 2 Parameters, @Customer & @Area. When trying to set up the Available Values for @Area, I'm having issues using multiple values for one Label, i.e. = "4006" Or "4610"
One of the Filters in the Report is an Operation number, which is the [OPERATION] field, which is setup as a filter on the Tablix referencing the @Area parameter.
PROBLEM: I cannot retrieve any data when trying to use the ‘Or’ Operator here. If I simply put “4006” or “4610” I retrieve data, but when trying to combine it returns no data.
Example, I need to allow a user to select ‘Chassis Incoming’, which would include data from Operations 4006 & 4610.
QUESTION:
Any way to pass Multiple Values for a single Label in the Parameter?
I realize the typical solution may be to use ‘Multi-Value’ selection, but in this case we want the User to select the Area and the multiple values for Filtering will be automatically determined for them. Otherwise, they are subject to not getting
it correct.
I have tried several different ways, such as =”4006” Or “4610”, =(“4006”, “4610”), = In(“4006”, “4610”), etc….
Note: We are using Report Builder 3.0

Based on my experience, there's no way to 'intercept' the query that gets passed back to SQL Server, so a Split wouldn't work.
Try creating either a function or stored procedure using the code below (compliments to
http://www.dotnetspider.com/resources/4680-Parse-comma-separated-string-SQL.aspx) to parse the string:
CREATE FUNCTION dbo.Parse(@Array VARCHAR(1000), @Separator VARCHAR(10))
RETURNS @ResultTable TABLE (ParseValue VARCHAR(100))AS
BEGIN
DECLARE @SeparatorPosition INT
DECLARE @ArrayValue VARCHAR(1000)
SET @Array = @Array + @Separator
WHILE PATINDEX('%' + @Separator + '%' , @Array) <> 0
BEGIN
SELECT @SeparatorPosition = PATINDEX('%' + @Separator + '%', @Array)
SELECT @ArrayValue = LEFT(@Array, @SeparatorPosition - 1)
INSERT @ResultTable VALUES (CAST(@ArrayValue AS VARCHAR))
SELECT @Array = STUFF(@Array, 1, @SeparatorPosition, '')
END
RETURN
END
Once created you can do things like this:
SELECT * FROM Parse('John,Bill,David,Thomas', ',')
SELECT * FROM (SELECT 'John' AS TestName union select 'David' AS TestName) AS Main
WHERE TestName IN (SELECT ParseValue FROM dbo.Parse('John,Bill,David,Thomas', ','))
This is what your SQL query would probably look like:
SELECT OperationID, OperationName FROM dbo.Operations
WHERE AreaID IN (SELECT ParseValue FROM dbo.Parse(@Area, ','))
You may need to fiddle around with the Separator depending on whether SQL Server inserts a space between the comma and next value.

Multiple values in a single cell in report !!

Hello,
I want to display multiple values in a single cell, each value separated by comma.
Ex: I have Employee and Department.
If a employee works for many departments, all the Department names should be displayed in the same cell in the report.
Please help !

Thanks for your replies !
Is there any other way to achieve this ?
There is 1 InfoObject which has 2 fields Employee and Department.
Employee     Department
001                A
001                B
001                C
In the report there should be 1 row for Employee 001 with all the Departments displayed in the same cell separated by commas.
Can this be done in the backend through a ABAP code?

Multiple Excise Invoice for Single GRPO

Hello All
How do we create multiple excise invoices from a single GRPO document.
Thanks
Santhosh.K

Hi
As per the scenario you mentioned.
You can't create multiple Excise Invoice against Single GRPO. And as per the law of excise also there is no way to do like this.
Gate Pass made against delivery when some vendor send the item to the client. Time quantity and rate with the duties are mentioned in that.
similarly when client received the material all the above should be there in the gate pass.
Ashish Gupte

Passing multiple values to a single input parameter

Hi folks,
I have a Microstrategy query successfully passing input parameter to a calculation view. For example I can pass a movement type to a material movements calculation view input parameter. However if I try to pick more than one movement type the query then fails;
Generated SQL that works looks like this;
select
sum(a11.TOTALQUANTITY) WJXBFS1
from
"_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', '101')
a11
When choosing more than one value in Microstrategy the SQL now fails and looks like this;
select
sum(a11.TOTALQUANTITY) WJXBFS1
from
"_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', '101'),
'PLACEHOLDER' = ('$$MoveType$$', '103'))
a11
If I cut and paste the SQL and run directly in HANA studio the error is;
Could not execute 'select sum(a11.TOTALQUANTITY) WJXBFS1 from "_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER" ...' in 66 ms 361 µs .
SAP DBTech JDBC: [2048]: column store error: search parameter error: [2018] A received argument has an invalid value;TABLE/VIEW parameter: ( 'PLACEHOLDER'='$$MoveType$$, 103') not supported
Is it possible to pass multiple values in a single parameter? I'm using SP67 for this test.
Thanks,
-Patrick

Ravi, also to answer one of your questions about how this will work in Microstrategy; I just heard back from my Microstrategy developer and he is trying MSTR Freeform SQL query with syntax like this;
select (sumPAR_TEST.TOTALQUANTITY TOTALQUANTITY
from "_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' =('$$MoveType$$', '[Movement Type]')) PAR_TEST
In this example [Movement Type] is the microstrategy prompt. Unfortunately though it translates like this which is missing extra single quotes around each value;
select     sum(PAR_TEST.TOTALQUANTITY) TOTALQUANTITY
from     "_SYS_BIC"."development.pr1959/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', ''101', '102''))   PAR_TEST
instead of what we need which is;
('PLACEHOLDER' = ('$$MoveType$$', '''101'', ''102'''))   PAR_TEST
So at this point we are not sure if this will be possible or not.
-Patrick

Multiple alerts in PO single stack

Similar Messages

Maybe you are looking for