Multiple angles not appearing in viewers

I have recorded an event with four camcorders and then brought them into Final Cut Pro X as a single event. I selected all four camcorder videos and syncronized them. I have show angles slected for voth viewers but only get the one angle. I execute angle editor and it does not work since I only have one angle displayed.

It appears that your four cameras were put into just one angle.
Here is what you need to do: for the clips for each camera, go to the inspector, click the "Info" tab. If necessary, switch to the settings or extended view) and fill in something appropriate in the "camera angle" or "camera name" fields. This will help FCP X make different cameras into different angles.

Similar Messages

Why are some inbox messages not appearing in Mail on multiple macs and other devices?

My partner and I have an iMac at home and one at work. We also have two iPhones and two iPads. We only have a couple email accounts each and two for work set up on all six Mail applications. For some reason inbox messages are not appearing consistantly on all six devices. For example, I can have a new message from my Mom, see it at home and on my iPhone, but not on the iMac at work.
Also, some messages I'd like deleted off my work iMac since they're personal, but I'd like them kept on my home iMac and iPhone. Is this possible? Is it possible to delete a message on one and have it deleted on all others?
Message was edited by: witboy

What type of email accounts are they? IMAP or POP.
IMAP leaves messages on the server so you can get them from everywhere.
With POP, messages are downloaded to your client and then removed from the server, depending on your settings.
The iDevice setup for POP doesn't remove them from the server.
I think Mail's default setup for POP is to remove immediately.
If they are POP accounts, you can set Mail's preferences to leave messages on the server for a period of time so that you can retrieve them on multiple clients.

Children not appearing in drop down of dimension in multiple hierachy

Hello,
In 4.2 we had parenth1 and parenth2 and one dimension table (at least I think). If parenth2 had multiple layers of children (children that were parents) you saw them in the drop down lists of the dimension for the second hierarchy. In 5.1 it appears the architecture changed with dimensions and multiplie heirarchies. I do not see children of children in my alternate hierarchies as before. In looking in the dim"dimensionName"_H2 table I see the correct information. The data seems to be in the tables but drop down lists for the dimension are not showing children of children if this makes sense.
Ex.in 5.1 I'm expecting to see in Hierarchy2 09 -> Child 099 ->Grandchild 0991
but I'm only seeing Hierachy2 09 -> Child 099
The Grandchild 0991does not appear. (Grandchild if you will of Hierarchy2)
In Hierachy1 of the same dimension (or what use to be Parenth1 in 4.2) you see all parents and their children and children of their children etc. Note: this dimension is built using a dimension build ssis pkg.
I know my explanation is probably wordy and confusing but hopefully someone can make sense out of it. Any feedback, would be greatly appreciated!
Vikki

Hi Vikki,
The way the memberselector shows the hierarchies to end-users is not changed from V4 to V5, so I think there might be something wrong in your dimension.
Please try to copy the contents of the mbr<dimname> table to you membersheet to see more clearly what is going wrong, also try to process it from there (it will give you more hints compared to using a ssis package to import a dimension.
Another idea is to look to Apshell, some dimension have multiple hierarchies, you could compare them to your own to see what is wrong.
Alwin

Some of my contact names are not appearing when they text message me. They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

some of my contact names are not appearing when they text message me. They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

I have this identical problem. For a while my group texts didnt show up on my ipad. Then one day they did, maybe everyone in the group started using the same os version or something. Ever since my first reply to the group there have been complaints of multiple threads. I can not find a pattern for when my group text's decide they want to create a new thread. (it doesnt happen every time) Everyone in the group has deleted the thread, we've all toggled imessage on/off etc. There still hasn't been a solution.
Any help would be appreciated.
Thanks

Page Numbers Not Appearing in Data Merge Document?

Hello, hopefully someone can help. I am pretty new to InDesign but learning a lot. I am creating a member directory of about 200 pages (about 2800 records merged from .csv to InDesign 6). Everything is working fine with the merge, except generating the page numbers. I tried adding page number at the bottom of the page to the master BEFORE merging. But if I do that, it greys out the "multiple records per page" option when trying to perform the Data Merge (using "Create merged Document"). So, I tried adding the page number to the A-master AFTER creating the merged document, but the page number is not appearing on any of the pages. There must be a way to do this, can anyone help?
(FYI - to generate the auto page numbers, I am going to the Type-Insert Special Character-Markers-Current Page Number, and placing that within a text field at the bottom of the page. Thanks in advance. )

Here is a screen shot. I have placed it on the A-Master. See Screenshot#1. Screenshot #2 shows Page 70 with no page number (and no other pages have page numbers that I can see. Thanks for your advice on fixing....
Sorry, here is screenshot #2, (with personal details redacted but the records are there behind the grey boxes):

Direct sales line items not appearing in VF04 even if MIRO document created

Hi,
Some of the direct sales line item are mysteriously not appearing in VF04, even though the MIRO for the PO related to it is done. In some cases all the items of sales orders are not appearing in VF04 , in some cases it is happening randomly. Such items can be process manually through VF01 . Also if report SDVBUK00 is run , these line items are seen in VF04.
Kinldy reply .
Mamta

Dear Uday Kumar Narayanappa ,
I think as a consultant you have the say in deciding how the things should be mapped in SAP than the USER.
I dont find any reason other than having the same user id being shared between multiple users (and hence variant cannot be used).
Anyways try this.
Make a Z program copying VF04 .
Give the Tcode which is agreeable for the users.
In that Z program , write a code NOT TO CONSIDER documents of type ZNEW.
Now limit the authorisation of this new program only to those users who doesnt not want to deal with ZNEW.
Hope it helps.
Thanks & Regards,
Hegal K Charles

Safari app not working, webpage not appearing and unresponsive. Calling all iphone 5 experts for help!!!!!!

Hi, need help. Safari app working fine until just now. Webpage not appearing and when trying to open the app, its a white page. Like you see pages, bookmark, the search tab, but when trying to press any of the buttons, it is unresponsive. When i try to go to setting to see if the problem can be fix, my safari setting isn't open either. I try going to icloud and try to turn off and on the safari data, in hopes that it would work. Nothing. I have done reseting network, and currently resetting all setting to see if this will work. I also did a soft restart, hard restart, turn on and off the phone multiple times. All other apps are responsive but safari. My itunes won't let me sync my phone and in order for me to do that, i would have to reset phone to factory setting, which would be a last option for me.

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
No data is lost due to a reset.

Iphone does not appear in itunes. _ALL_ recommended steps were taken to no avail

I'm using windows 7 pro 64-bit, itunes 10.3.1. I have an iphone 3gs running ios v. 4.3.3. All software and drivers are up-to-date on my computer.
When I open itunes and plug in my iphone, itunes hangs for roughly two solid minutes. After which, my iphone does not appear in itunes. The same thing happens if I reverse the order and plug in my iphone before opening itunes.
I have read and followed all and I mean all the instructions in multiple articles on the apple support site to try and resolve the issue, and nothing has fixed the problem. My impression is that this is a bug in the latest itunes release since the problem started after updating to the latest version of itunes and did not occur previously. Nothing else changed with either my computer or my iphone since then. In all other ways, my computer, all USB devices connected to it, and all other software installed on it function perfectly.
Here are the things I have done that DO NOT RESOLVE MY PROBLEM:
- restart apple mobile device service and verify it is configured correctly
- restart ipod service and verify it is configured correctly
- restart my computer
- reset my iphone
- verify that my USB drivers are up-to-date and all USB ports are functioning correctly
- verify that my iphone DOES correctly appear in windows explorer and the device manager
- verify that my security software (norton 360) is updated to the latest version
For the record I am not running any third-party phone software.
Here is the only thing I have found that works, however, it works ONLY for the first time I open itunes afterwards. After syncing ONE TIME, the next time I open itunes, the problem comes back exactly like before.
- completely uninstall, and then reinstall all apple software in precise accordance with instructions given on the support page http://support.apple.com/kb/HT1923
I honestly don't expect anyone to have a solution to this issue, but I will be thrilled if there is one. I am posting primarily to see if anyone else is experiencing the same problem, and hopefully to gain the attention of a developer who can hopefully institute a fix.

Sounds like a ruined iTunes install iTunes require a number of services running if an overzealosch firewall or rights settings or "optimisme" program stopped any of those what you exp happens

PR deleted line should not appear in PO creation

Hi Folks!!!
We create Purchase Orders with reference to Purchase Requisition. In case of Multiple Line Item in PR, there are some line items marked for deletion.
While creating PO, the line items marked for deletion in PR should not be adopted (appeared) in PO. What settings should I make to do it.
Best regards

Hi,
In ME21N, you receive message 06 050 - "Purchase requisition & item & already deleted". This message can be changed to an error message via IMG transaction OME0. The checks for the messages can only take place,
after adopting all positions (as well deleted ones).
To prevent this, please check to see if one of the following will help:
1) Select the checkbox 'Open only' on the selection screen for the overview. In this case, the deleted items will not appear on
the overview and therefore they cannot be adopted. Or,
2) If you do not want to have the purchase requisitions with deleted items selected in ME21N, you can use the field "deletion indicator" in the variant for your purchase requisitions, by excluding it in   the dynamic selections.
P.S. If you have maintained message 06 050 as E (error), the user will not able to save the PO (he can only hold it)
Regards,
Mauro

NAC Agent Login Dialog Not Appearing - ISE 1.1.1 issue ?

Agent Fails to Initiate Posture Assessment
The NAC agent is properly installed on a Windoes 7 , IE 9 machine, the certificates from ISE ADM PRI are installed in trustable certificate store in the client machine but is a selfsigned ISE certificate.
The reports / USER / Profiling report says the Provisioning Agent has completed the assessment ok.
The redirected URL is working fine (SEE Evidence)
We are always prompted to install the NAC agent again or looking at the additional prompted information wait for the NAC agent to load and complete.
The operations status remains with postering status pending forever and nothing else happens.
Symptoms or Issue
The agent login dialog box does not appear to the user following client provisioning.
Conditions Cisco Says this issue can generally take place during the posture assessment phase of any user
authentication session.
Cisco Advises as Possible Causes There are multiple possible causes for this type of issue. See the following
Resolution descriptions for details of what was already tested by us and please see the atached files for your switch configuration and evidences. .
CISCO SUGGESTED POSSIBLE CAUSES AND RESOLUTIONS
Resolution • Ensure that the agent is running on the client machine. ALL TESTED OK
• Ensure that the Cisco IOS release on the switch is equal to or more recent than
Cisco IOS Release 12.2.(53)SE. - OK
• Ensure that the discovery host address on the Cisco NAC agent or Mac OS X
agent is pointing to the Cisco ISE FQDN. (Right-click on the NAC agent icon,
choose Properties, and check the discovery host.) - OK (See evidence)
• Ensure that the access switch allows Swiss communication between Cisco ISE
and the end client machine. Limited access ACL applied for the session should
allow Swiss ports: ALL CONFIGURED as CISCO GUIDELINES OK (SEE EVIDENCE)
• If the agent login dialog still does not appear, it could be a certificate issue.
Ensure that the certificate that is used for Swiss communication on the end client
is in the Cisco ISE certificate trusted list. (ALL CHECKED OK SEE EVIDENCE)
• Ensure that the default gateway is reachable from the client machine. (TESTED OK)

Hi.
Can you paste all the ACLs on your switch especially the webauth redirect ACL which should deny traffic towards the PSN.
regards
Zubair

SSI do not appear in design view; CS4

All of a sudden.. my ssi's do not appear in design view in CS4. This is occuring in multiple web sites that prevously DID display SSI's
Yes.. I do have Preverances --> Invisible Elements --> Server Sides Includes: Show contents of include file IS checked
Yes.. I have checked both the local and remote information in Site definitions .. all are correct. (and none have changed since the problem emerged) All sites are set to site root relative.
Yes.. I have checked each include. None has any doc type, html or body tags.
No.. LIve View is not turned on
Yes.. the pages all validate
Yes.. I have tried to 'start from scratch' .. new site, new site definitions.. new .shtml pages and new includes. No love!
After inserting a new SSI using the insert menu (typical code result: ) the properties bar seems to get stuck .. displaying the ssi code and not allowing me to select other elements on the page to edit properties. A restart of Dreamweaver solves the problem. But boy is this annoying.
All of the includes do display properly when uploaded to the web server and viewed in a browser.
I've searched the forum.. and read any post that seemed even remotely relavant and have not been able to solve the problem.
I would really appreciate your help. I am a web designer and have used Dreamweaver for many, many years.
Karen

Nice site. I drive by that school quite often when I shop in Thousand Oaks.
Crashes, installation, JavaScript errors, and unexplained problems
If Dreamweaver is acting erratically, or if you see a message saying "the following JavaScript error(s) occurred", it's usually a sign of a corrupt cache file. The first thing to try should always be to delete the file cache. If that doesn't work, delete your personal Configuration folder. Full instructions are in Deleting a corrupted cache file.
http://forums.adobe.com/thread/429114
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

SVG image does not appear in mobile version but does in desktop version

Hi,
I am new to using Muse and have created only one site before in Muse. I have taken screenshots to show the problem I am having.
I have used Illustrator to create the following logo image that I save out as an SVG file:
As you've probably guessed, I have used clipping mask to insert the marbly purple image into the shapes and text (this may be relevant to the problem, I don't know).
I then save it out as an SVG with the following details as advised by Adobe:
Then moving into Muse, I File > Place the SVG file. 'Unable to generate thumbnail' comes up in both desktop and phone versions:
Regardless, I uploaded to FTP post to my website. While the SVG appears perfectly on my desktop browser, it does not show at all on my phone browser:
This is not only happening on my phone, I have visited the same website on multiple phone devices and still the SVG image does not appear. Any ideas why this is happening?
Have I totally missed something about file formats for mobile browser versions in Muse?
Also- in illustrator, I saved the SVG logo for the mobile version as a SMALLER SVG than the one I saved for the desktop version.
Thanks

Use a PNG file. I see nothing in your logo that would warrant using anything else. You're not scaling it, there is no interaction and all you are doing is masking out some data that is pixels already. Pardon me, but using an SVG makes no sense at all. Beyond that one would need to see the file, but my guess would be that the "responsive" setting once again embeds some garbage data. Wouldn't be the first time...
Mylenium

Img Does not appear in Design View

Dreamweaver 8
Have an image that I would presume has a simple enough presence in the page...
<table width="985" border="1" cellspacing="0" cellpadding="0" height="100">
   <tr>
      <img src="Includes/Images/ButtonsNBanners/bnrPrimaryTop.png" alt="test" width="1074" height="94" border="0" usemap="#Map1">
   </tr>
</table>
...and sure enough the image appears as expected at runtime.
But within Dreamweaver Design View it does not appear at all.
Why?
I have multiple other images on this page that all appear within the designer as expected, but not this one.
My main problem right now is that I need a map associated with this image and would really like to use DW's tools to create and position the <area> tags.
Has anyone seen this sort of behavior in DW8 before?
All input welcome and appreciated!!!

That was it KathH --- THANKS!!!
Had created the row w/out <td> cells to carry the top banner (sort of cheating) on spanning the cells i guess ( )
Anyway, re-wrote so that the banner table was independant and did not require span and picked up the data table independantly.
Problem solved and designer picked up the image precisely.
Thanks again!!!
Curious though that the image is dependant on the <td> tag. I would have expected any image called within the page to display in the designer regardless of location in the html.
Oh well, fixed and onto the next challenge.
Once more THANKS!!!

MacOSX (10.9): Print dialogue box does not appear when printing PDF's

Hi there,
I've been having some troubles with the latest version of Adobe Reader on an intel-based MacBook Pro running MacOSX 10.9 (Mavericks).
Environment Details:
Device type: MacBook Pro
OSX: 10.9 (Mavericks)
Adobe Reader version: 11.0.06
Details:
After installing Reader 11.0.06, the print dialogue box does not appear through the print button or through File -> Print... . As a result, I simply cannot print PDF documents when using Adobe Reader.
- Only 1 MacBook Pro affected
- The print dialogue box does appear for other application (i.e. Preview, Word, Excel, etc., etc.)
- Multiple restarts performed
- Attempted to download older versions with no success
- Attempted multiple uninstall/reinstalls
- Reset the CUPS printing system multiple times
- Validated that the account accessing/using Reader has full administrative privileges to the Adobe Reader application
- Occurs for multiple PDF's from various sources
-> Online source
-> Converted from Word
Additionally (I'm unsure if this is related or not), but after trying to perform an update, I receive the following error:
An unimplemented or obsolete function was called
Any help would be greatly appreciated.
Cheers!

Hi there,
Just bumping this thread for more visibility.
If anyone has any thoughts, I'd more than appreciate your advice!
Cheers!

"" does not appear to be a valid email address. Verify the address and try again.

I am getting this error whenever I copy an email address from somewhere and paste it into the 'To' field.
“” does not appear to be a valid email address. Verify the address and try again.
Whattup with that?
Only way to get around it seems to be either typing the whole address in (uh!) or clicking on the email address and letting Mail create the new message. Both are not the way I need to do things and it used to work perfectly in Snow Leopard, as would be expected for such a basic sort of command.

I had the same problem with multiple adressess:
I used the " ; " as a seperator.
The message was sent with no trouble at all as soon as I used the " , " (comma) instead.
Hope this helps

Multiple angles not appearing in viewers

Similar Messages

Maybe you are looking for