Multiple Business Systems for Multiple Receivers?

hi,
idoc > xi -> multiple receivers with xml payload
I have a scenario where i have to configure multiple receivers for each Supplier from an IDOC. All the receivers will be either HTTP or SOAP.
When the mapping would be the same for all the Suppliers but during configuration we have to determine the receiver based on an IDOC value to route the xml via HTTP or SOAP
For this to achieve do we have to create multiple business systems for each receiver?
If i create a receiver in the business service how can we determine the interface mapping in this scenario?
Thanks,
Tirumal

Hi Tirumal,
For this to achieve do we have to create multiple business systems for each receiver?
As you know,Business system is a logical name for the Techincal Systems, Theoretcially it is not required to create different Business systems for the each receivers.
Generally Business Systems are grouped/created based on the Business Process/Functionality/Type of Receivers etc.
So if you think, your each receiver is of type different type/process then create different Business systems.
It depends~
If you create Business Service, then you need to add your Message Interfaces explicitly into the Business Service( By open the Business Service->You can see the Sender/Receiver Interface tabs).
Hope this helps,
regards,
moorthy

Similar Messages

3rd party tech systems for multiple business systems...

I think this might a very stupid question but still would like to post it..:).. In a 3parties involved scenario, can 1 technical system be assigned to multiple business systems , if all business systems refer to the same 3 party..or does each 3rp party business system needs its own technical system..
Also I need to move only 1 product and the SWCV assigned to the product to QA..I do not want to export entire SLD..By exporting this single product and importing into the SLD of QA, I hope it will not overwrite the SLD components of the QA box but add this new product as delta.
-Teresa

Hi Teresa,
>>>Also I need to move only 1 product and the SWCV assigned to the product to QA..I do not want to export entire SLD..By exporting this single product and importing into the SLD of QA, I hope it will not overwrite the SLD components of the QA box but add this new product as delta
I believe you can only do an incremental export/import
sld does not allow importing/exporting one product...
Remember to do a backup of your QA SLD
(from the SLD - administration)
then if you make a mistake nothing will happen
about the second question:
"Business systems, which name the logical receiver independently of technical properties. For example, a business system might be a client of an SAP system.
Technical systems with which the hardware of the system is specified in more detail (server data, and so on)."
this should be possible not only for SAP systems
Regards,
michal
Message was edited by: Michal Krawczyk

Multiple Business systems

Hello,
Can Multiple Business systems be associated with one Technical system in SLD and assigned in D ?
Regards,

Hi,
> Can Multiple Business systems be associated with one Technical system in SLD and assigned in D ?
It is possible.
You can create N-number of business systems (if ECC system then we can't create more than one business system by using the same client value) for a particulat technical system.
For any application system we can create only one technical system.
Regards
Ramesh

Same Technical System multiple Business systems?

Hello,
We have a unique (atleast i felt it) landscape where we have 2 Prod PI system. We have divided out interfaces logically into 2 categories and they will run on the respective prod system. Both this prod have its own SLD and hence there is no issue here.
The issue is with the Pre-Prod where like prod we have 2 PI systems (and 2 integration servers) but they both share the same SLD. We have only one SAP R/3 backend system and hence we have only one technical system in the SLD but this SAP R/3 system has to connect to both the Pre-prod systems for different interfaces. For this to happen we have to create 2 Business systems with the respective PI pre-prod Integration Server. But SLD doesnt allow to create 2 business systems for the same technical systems.
Is there any way around this as we cannot change the SAP R/3 system and also cant have different client in R/3 for each of PI Pre prod.
This is a major roadblock and requires your expert advice on how to proceed in this scenario.
Regards,
Yash

Shitij,
You are correct in understanding that the requirement is to create 2 business systems for the same technical system with same SID (S*1) and same client.
The reason i need this is because I have 2 PI system P1 and P2 with 2 different integration server which share the same SLD. Now when i create a business system for S1 i specific the inegration server for P1 and add this business system in the transport target for P*1.
How will i do the same for P2? I cannot create a new business system for S1 with integration server of P2 and add it in the transport target for P2. If i dont do it i cannot do any transports as it will give error like no Business system found in SLD.
Hope i made it clear.
Yash

CMS - Are multiple business systems required?

I am receiving a CMS error of "VIAWARE" (my business system) in not assigned a business system in group QA. I only have one viaware business system for R/3 dev, qa, and prod to point to. I don't want to make 3 VIAWARE business systems if I don't have to. Do I need three?
Thanks

Hi,
If you are using single SLD for all Dev,QA and Prod environment, then you need to replicate the Business Systems for each environment..
So one Business System represents one Technical System in this case R/3. SO in each environment SAP systems are different..
But if you have 3 SLDs, then no need of creating 3 business systems.
btw, while transporting did you assign Business Systems for transport group ? this doc may help u-
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Hope this helps,
Regards,
moorthy

Business system for legacy system

hi guys,
Can we create business system for legacy system ?If yes what is the use?
satya reddy

Hi,
Yes you have to create Business system for legacy systems..
It may be the Standalone java . or Third party system..
When you are doing some POC or such type of things create Business Services
also..
A business service represents an abstract unit for addressing message senders and message receivers. You can use a business service to group interfaces.
It is useful to use business services when configuring cross-company processes. Usually, the interface descriptions of the business partners involved are made publicly available. The system landscape is only partly known, however.
See the below links..
http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/frameset.htm
Regards
Chilla..

How To Create A Technical And Business Systems For Web AS ABAP ???

Hi Experts,
How To Create A Technical And Business Systems For Web AS ABAP ???
Please Let me Know All the Step-By-Step Process to Create ????
Points Will be Given
Regards
Khanna

Hi Sumit,
When U Told the thing that first time to execute the RZ70 and All i Did this in XI System
So I got An Entry for the Technical System for XI System.
Now i Deleted that and Executed RZ70 in R/3.
When I Executed RZ70, I got this Error.
 "RFC Call failed: Error Opening an RFC Connection ".
Now I am Unable to see Any Technical System Under Web As ABAP. It's Showing Empty Now.
Please Let me know
Regards
Khanna

Can we define two business system for a Client.

Hi XI Experts,
          We are facing problem regarding the Technical & business system in SLD.
          For deploying the readymade .tpz files , we have to define a technical system as ABAP in SLD.
          under this Technical system one Business system with specific name to be defined.
           But problem is that in Custmor's landscape they have already defined a Technical system & corresponding Business system for a specific client 250.
so while adding the new business system to existing technical system we are facing error:--
        Business system is alredy define for this client , choose another client.
    as a second option we defined a new technical system and when we try to define the new business system under this it also throw error:-
         Client is associated with Logical system name of existing business system.
        suggest the solution .

Hi Sudhir, I think in XI there is 1:n relationship between Technical sysytem and business system.
Means for a technical system we can define a no. of business system , but only limitation is that for a Specific client we can define a single busines system with a logical system name.
so i am looking for any way around. for my scenerio is to add a another business system to the client which has already defined business system.
suggest if any alternative solution is there.
with thanks.

Individual business system for ABAP and Java Stack

Hi All,
I need to send message from a system to XI via ABAP proxy and Java proxy. The sender's ABAP and Java proxy use the same message interface to communicate with XI. Should I create one business system for the ABAP stack and one for Java stack of the sender system?
Thanks + Best Regards
Jerome

Are you sending same message type from ABAP proxy and Java Proxy to XI?
If you have ABAP proxy, why do you need Java Proxy? Actually you cannot create any Java proxies on ABAP bases systems. What kind of system sender is? Java proxies are created for pure Java based applications.
Let me know if I didnt understand your question correctly. If so, please explain in detail why you need both proxies and what is your sender application.
--Archana

Problem by Maintaining a Business System for the Integration Server

Hi to all,
I have the following problem. I tried to change some Business systems configuration in SLD but accidentally deleted defined Business System for our Integration Server. After that I tried to create that business system again but I have the following error:
Integration Server already defined. There is already an integration server defined for the selected technical system. Please select role Application System.
Since than Im receiving the following error message when I try to refresh my adapter engine cache:
com.sap.aii.ib.server.abapcache.CacheRefreshException: Unable to find an associated SLD element
Do you know how can I define the Business System again currently I can't see it in SLD Business systems?
Ive also checked the IS URL (TR: SXMB_MONI) and it seems that its ok.
Regards
Naycho

Hi Naycho,
i think you have to clean up some sld rubbish
Go to SLD / Administration / Content Maintenance. Choose left side "all classes" or "landscape description" and right side "business system". Delete all entries you find for your business system, after that try to recreate it.
Regards,
Udo

Registration of Business system for the Integration Engine Java in the SLD issue

Hi,
We have completed the installation of PI-AEX 7.4 SR1 then we ran the below wizards successfully.
- Configuration Wizard: PI-AEX initial setup
- Configuration Wizard: PI Self Test for AEX
However when we were Checking the AEX Configuration as per help.sap.com
Check the registration of a business system for the Integration Engine Java in the SLD:
 Enter https://<host>:<port>/sld .
 Choose Start of the navigation path Business System Next navigation step Integration Engine Java <SID> Next navigation step Integration End of the navigation path.
 The pipeline URL must be: http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet?ximessage=true .
More information: SAP Note 1435392
for us the Pipeline URL is as below
http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
and the rest " ?ximessage=true " is not there.
Also we ran the below wizard
Configuration Wizard: PI Self Test for AEX
and it finished successfully without any issue.
Any Suggestions what could be missing.
Thanks,
Regard
Ahmed Mohammed

Hi,
I found the below SAPNOTE which confirms that the Pipeline URL should be
http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
1564449 - PI CTC Wrong Pipeline Url after AEX Initial Setup
However on help.sap.com it is different.
Any one experienced the same ?
Regards
Ahmed Mohammed

Business Systems for File to File Configuration

Good day.
We need to created two (2) Business Systems for our File to File Configuration.
Configuration Details:
SWCV must be attached to a Product.
Technical Systems must be Third Party.
Business Systems must be identified as an Application System.
Problem is that i don't know where to start. Can you help me.
Thanks.

Hi Abe
Pls. follow below steps -->
In SLD
1. Create the Product & Software Component for File Systems.
2. Create the Technical systems as Third Party & select the Installed Products for File systems accordingly.
3. Create the Business Systems & select the corresponding technical system.
In IR
1. Import the SWCV from SLD using Tools --> Transfer from SLD option
2. Create the Data Type & Message Type for source & destination .
3. Create the Inbound & Outbound message interfaces
4. Create the Message Mapping & interface Mapping.
In ID
1. Create the scenario
2. Using context menu of Business System. Assign Business system for Source & target systems
3. Create the Sender & receiver file adapter.
4. Create the receiever determination, interface determination
5. Create the Sender & receiver agreement.
- Lalit -

Change Business System for Java Proxy Client

I have created Web AS Java business system for Java proxy.
Is it possbile to send message from client Java Proxy as another business system (Third party)?
For example to specify this system
MessageSpecifier messageSpecifier = proxy.$messageSpecifier();
messageSpecifier.setSenderService("MY_BUSINESS_SYSTEM");
proxy.$messageSpecifier(messageSpecifier);

Yes, it is.
That's the way to do it.
Stefan

Multiple backend systems for business package ESS/MSS

Hi,
I would like to know whether there is a smart solution for connecting the business package ESS/MSS with multiple backend systems (up to 10 systems).
I am aware of the possibility using parameter "sap-wd-arfc-useSys", but this implies, that content needs to be duplicated n-times in order to be able to maintain the Jco destination suffix.
Any hint, also for custom built solutions are very welcome!
Best regards,
Johannes

Johannes
There is some problem with the link
See this.
Connecting multiple SAP Systems
Thread name is 'Connecting multiple SAP Systems'
Krishna Murthy

How do I use the rating system for multiple raters?

My wife, her sister, and I are all rating some photos I took a couple of days ago. Each of us, of course, has different favorites.
I would like to record our different ratings in the LR3 rating system but can't see an immediately obvious way to do so. I thought of using the color labels--different color for each of us. But each photo will only take one color label. I could use the star ratings, one star for only one selection, two for two, etc. But that would not record who chose which. I need to know that.
Has anyone had the same problem? If so, is there some rather obvious solution? I would think that it's not all that unusual for several folk to participate in a shoot, using one camera; and then to need some way to record their differing judgments on the photos in LR3.
Any thoughts would be helpful. Thanks in advance,
John Kendrick

The rating system in LR3 is not really designed with that type of functionality in mind. The "target Lightroom user" is an individual that uses LR to create a catalog of photographs which can be graded with a star rating based upon their opinion of the photograph. The concept of seperate star ratings for multiple users doesn't really fit into that concept. LR3, in general, is designed with a single photographer in mind... one that essentially uses the program by his/herself... so it has a bare minimum of 'group' functionality.
It may be possible to find a plug-in that will enable star ratings by multiple users, but I've never heard of one before.
If you really, really need this type of functionality (i.e. saving star ratings by multiple people), the only way to do it that I could think of would be to create multiple collections of the same shoot, each of which is filled with virtual copies of the original photos. Each collection could hypothetically be called '08-03-2010 Bill Ratings'...'08-03-2010 Jill Ratings'... etc... etc. Admittedly, such a workaround may very well be more trouble than its worth... that's just the only way I can think of that you might come close to achieving the functionality you're after.
***EDIT: You beat me to it (VC idea) while I was typing this reply, Ian... wasn't trying to post redundant info...

Multiple Business Systems for Multiple Receivers?

Similar Messages

Maybe you are looking for