Can we define two business system for a Client.

Hi XI Experts,
          We are facing problem regarding the Technical & business system in SLD.
          For deploying the readymade .tpz files , we have to define a technical system as ABAP in SLD.
          under this Technical system one Business system with specific name to be defined.
           But problem is that in Custmor's landscape they have already defined a Technical system & corresponding Business system for a specific client 250.
so while adding the new business system to existing technical system we are facing error:--
        Business system is alredy define for this client , choose another client.
    as a second option we defined a new technical system and when we try to define the new business system under this it also throw error:-
         Client is associated with Logical system name of existing business system.
        suggest the solution .

Hi Sudhir, I think in XI there is 1:n relationship between Technical sysytem and business system.
Means for a technical system we can define a no. of business system , but only limitation is that for a Specific client we can define a single busines system with a logical system name.
so i am looking for any way around. for my scenerio is to add a another business system to the client which has already defined business system.
suggest if any alternative solution is there.
with thanks.

Similar Messages

How to determine the sender business system for ABAP client proxy

Hi All,
I have one doubt: when the client proxy sends the message to XI, how could i know what is the sender business system name for it?
Is it the logical system which is reflected in Technical System?
let's say if i have the ABAP system, the technical system is ECC, which has three clients: 001, 066 and 000.
And the client 001's logical system in ECCCLNT001 (all the client proxy is created in this client). In this case, the sender business system name is ECCCLNT001, am i right?
If no, please correct me.
Thanks in advance
Leo

Hi lawrence
When data is distributed between different systems, each system within a network has to be clearly identifiable. The u201Clogical systemu201D deals with this issue.
A logical system is an application system in which the applications work together on a common data basis. In SAP terms, the logical system is a client.
Since the logical system name is used to identify a system uniquely within the network, two systems cannot have the same name if they are connected to each other as BW systems or as source systems, or if there are plans to connect them in any way.
Although SAP does not recommend that you connect test systems to production systems, a test system can have the same name as a production system. This makes copying production systems to test systems a lot simpler.
You are only allowed to change the logical system name of a system if the system is not connected to any other systems, because changing the logical system name would render all the connections to other systems useless.
Logical system names must contain capital letters and numbers only. SAP recommends the following naming convention for logical system names: <System-ID>CLNT<Client>.
Regards
sandeep

Define one logical system for PI or multiple LS for 3rd-party system?

Hi gurus,
We are using IDOC2SOAP and SOAP2IDOC scenario in PI7.11. My question is regarding the logical system(or partner profile) on R3 side. We have two 3rd party system:A and B, so we have two choices.
1. define one single logical system for PI integration server;
2. define two logical systems for A and B.
For choice 1, it seems we can only use one business sytem or business component (business service in 7.0) as the two 3rd party system, especially for SOAP2IDOC scenario.
For choice 2, it seems we have no restrictions.
Is it correct?Any help will be appreciated.

technically you can use both options.
The question is - do you want all the IDOCs in your R3 system to appear as though they were sent from the PI?
What if a lot of 3rd party systems were sending the same IDOC (for example - ORDERS) and you want to investigate only those who were sent from system A?
I like it configured that every system will be identified by a name I give it.
I just use the IDOC communication channel checkbox of "Take Sender from Payload"
or use a different service in the IBC that has a different logical system configured in its Adapter specific identifiers.
Hope it helps,
Imanuel Rahamim.

Problem by Maintaining a Business System for the Integration Server

Hi to all,
I have the following problem. I tried to change some Business systems configuration in SLD but accidentally deleted defined Business System for our Integration Server. After that I tried to create that business system again but I have the following error:
Integration Server already defined. There is already an integration server defined for the selected technical system. Please select role Application System.
Since than Im receiving the following error message when I try to refresh my adapter engine cache:
com.sap.aii.ib.server.abapcache.CacheRefreshException: Unable to find an associated SLD element
Do you know how can I define the Business System again currently I can't see it in SLD Business systems?
Ive also checked the IS URL (TR: SXMB_MONI) and it seems that its ok.
Regards
Naycho

Hi Naycho,
i think you have to clean up some sld rubbish
Go to SLD / Administration / Content Maintenance. Choose left side "all classes" or "landscape description" and right side "business system". Delete all entries you find for your business system, after that try to recreate it.
Regards,
Udo

SLD: Pointing two business systems to the same client...

Hi Guys,
Is there anyway to make two business systems point to the same client(on the same r/3 technical system)? how about a work around?
Thanks,
Harsh

Harsh,
>>Finally all collapse to one client in production.
Even though you will have multiple Business Systems in every envrionment, the final transport will happen from only one environment.
DEV --> QA --> PROD. In this case, objects are moved from dev to qa and then from QA to prod and so, all you will need is the trasnport target created in the QA business systems pointing to the Prod busines system and do the transport.
>While transporting to a new SLD(quality to prod) can I choose one transport target for multiple source business systems?
Take a look at this document for multiple SLD transports. Should answer all doubts,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Regards,
Bhavesh

Regarding Business System For HTTP Receiver Adapter.

Hi Everyone,
 Which Type of Business System do I need to select For defining HTTP Receiver Adapter.
I am doing File to Http Scenario. What will be my output look like, If i am Sending file as
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Source_FILE xmlns:ns0="http://city.net/FILEtoHTTP">
 <Message>
 <Id>123456</Id>
 <Head>
 <Id>123456</Id>
 <Filename>sample.xml</Filename>
 </Head>
 <Body>hello</Body>
 </Message>
</ns0:MT_Source_FILE>
Regards,
Varun

Varun,
You can use third party Business system or else you can use Business sevice also.
Take a look at these blogs,
Push Data to MVC Architectured application using XI
XI - SAP Business Connector integration using the HTTP adapter
Yuga

Only one business system for outbound java proxies?

Hi!
I have a problem regarding java proxy runtime JPR.
When I call the deployed outbound proxy from a client program, the java proxy sender service is always one defined business system. even if that has nothing to do with the business systems used by the proxy.
For example: I define a business system on the Web AS, which is responsible for the java proxy communication, this is the bean defacto. When I call this bean from a client the JPR calls the Integration Server using another business systems channel. Of course I get the runtime exception service unavailable, because it is not used in interface determination, as the sending channel. If I use the 'working' business systems channel it works just fine
I hope you get my problem.
If I enter the Adapter Monitor, then choose the JPR I can see under Cache that the working business system has several entries here.
Where is the difference between the one working system and others, has anybody ever faced this problem?
regards
Stefan

When you call an outbound java proxy bean, the sender business system is usually derived from the business system which is connected to the technical system Web AS Java in SLD.
If you want another sender business system, then you can set this with the application program with help of the message specifier class (look at manual for further details).
I recommend writing a wrapper bean around the generated proxy bean classes to enable the sending application program to provide the business system as a parameter. In that way different senders can provide their business system separately.
Regards
Stefan

Business Systems for File to File Configuration

Good day.
We need to created two (2) Business Systems for our File to File Configuration.
Configuration Details:
SWCV must be attached to a Product.
Technical Systems must be Third Party.
Business Systems must be identified as an Application System.
Problem is that i don't know where to start. Can you help me.
Thanks.

Hi Abe
Pls. follow below steps -->
In SLD
1. Create the Product & Software Component for File Systems.
2. Create the Technical systems as Third Party & select the Installed Products for File systems accordingly.
3. Create the Business Systems & select the corresponding technical system.
In IR
1. Import the SWCV from SLD using Tools --> Transfer from SLD option
2. Create the Data Type & Message Type for source & destination .
3. Create the Inbound & Outbound message interfaces
4. Create the Message Mapping & interface Mapping.
In ID
1. Create the scenario
2. Using context menu of Business System. Assign Business system for Source & target systems
3. Create the Sender & receiver file adapter.
4. Create the receiever determination, interface determination
5. Create the Sender & receiver agreement.
- Lalit -

Multiple Business Systems for Multiple Receivers?

hi,
idoc > xi -> multiple receivers with xml payload
I have a scenario where i have to configure multiple receivers for each Supplier from an IDOC. All the receivers will be either HTTP or SOAP.
When the mapping would be the same for all the Suppliers but during configuration we have to determine the receiver based on an IDOC value to route the xml via HTTP or SOAP
For this to achieve do we have to create multiple business systems for each receiver?
If i create a receiver in the business service how can we determine the interface mapping in this scenario?
Thanks,
Tirumal

Hi Tirumal,
For this to achieve do we have to create multiple business systems for each receiver?
As you know,Business system is a logical name for the Techincal Systems, Theoretcially it is not required to create different Business systems for the each receivers.
Generally Business Systems are grouped/created based on the Business Process/Functionality/Type of Receivers etc.
So if you think, your each receiver is of type different type/process then create different Business systems.
It depends~
If you create Business Service, then you need to add your Message Interfaces explicitly into the Business Service( By open the Business Service->You can see the Sender/Receiver Interface tabs).
Hope this helps,
regards,
moorthy

Can we use same Business Service for Sender and Receiver

Can we use same Business Service for Sender and Receiver

Hi
In addition to the above infomation explaining about the Business Service..
Business Service: Address an abstract business entity as the sender or receiver of messages.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
The business services are used when configuring cross-company processes also..
regards
Kishore

How can I define the possible entries for "invoicing process" at fkkinv_ma?

At the transaction code fkkinv_ma, I fill in the fields "Date ID" and "Identification" but I have a problem with the field of "Invoicing Process". When I psh theF4 button, there comes no search help. What should I do? Should I define the possible entries first? If I should, how can I define the possible entries for "invoicing process"? How is the customization done?
Thanks in advance for the answers.

You have to define them in the IMG
Financial Accounting (new)
Contract Account Recievable and Payable
Business Transactions
Invoicing
Invoice Types
You have to set up a number range, decide what type of Financial transactions should not be invoiced -- like Dunning Charges
then you have to have a developer create the form and form class of invoice.

Can we link two business objects in workflow?

Dear All,
Can we link two business objects in workflow?My problem is that I have to take a standard BO for triggering my z workflow .But later in one step I am using BO which is Z as I am calling a standard Sap transaction in one of the method inside Zobject.
Please let me know how to go for it .
Kind Regards,
Anshu Kumar

Hi Anshu,
You can use the standard BO as the BO for your workflow and trigeger the workflow from its event. To pass values from the standard BO to the custom BO used in the activity step, you need to do proper binding between the std and custom BO in the activity step.
Do proper binding between event -> workflow -> task container.
For assistance on binding in workflows refer to the followng links:
http://****************/Tutorials/Workflow/Workflow.htm
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/workflow%252bscenario
/people/sapna.modi/blog/2007/02/19/workflows-for-dummies--introductionpart-i
Hope this helps!
Regards,
Saumya

Business system for legacy system

hi guys,
Can we create business system for legacy system ?If yes what is the use?
satya reddy

Hi,
Yes you have to create Business system for legacy systems..
It may be the Standalone java . or Third party system..
When you are doing some POC or such type of things create Business Services
also..
A business service represents an abstract unit for addressing message senders and message receivers. You can use a business service to group interfaces.
It is useful to use business services when configuring cross-company processes. Usually, the interface descriptions of the business partners involved are made publicly available. The system landscape is only partly known, however.
See the below links..
http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/frameset.htm
Regards
Chilla..

Can we use two costing variant for standard cost estimate

Hi,
Can we use two costing variant for standard cost estimate of two different materials in the same period ? e.g. Costing variant Z001 for Material code 1000 and Costing Variant Z002 for Material code 2000.
Here the system is not allowing to change the costing variant in Marking Allowance (t code CK24) for marking and release of Material cost 2000 if the standard cost for Material code 1000 is already marked and released.
Thanks,
Bijay

For a material in a period only one price can be released. Though you cn have two separate costing variants and then calculate standard estimate with that. U can release based on one variant only for a month. Or use MR21 and update the price as per the other variant
Thanks and Regards

How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?

hello,
How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?
thanks,
Jay

Hi,
I understand that it applied first logo to all other sub sites.
Please make sure that you change the logos in the subsites.
If we change the logo in the root site, the logos in the subsites will be changed at the same time.
However, we can change the logo in the subsites separately.
We can go to a subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo->select a picture, then it will has a different logo than the root site.
Then go to the other subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo-> select another picture, then it will has a different logo that the first subsite.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Can we define two business system for a Client.

Similar Messages

Maybe you are looking for