Multiple Chart Types

Is there a way to have multiple charts types in one chart. I can not seem to figure it out. For example, I would like to display events per day as a bar chart and on the same chart have the average of events over the last week displayed as a line.

I have come up with a far from perfect way to overcome this. With two data sets using the same x-axis values, I made two separate charts in 3D mode (can't get it to work in 2D). Then, I set one of the charts to have its Y-axis on the left and the other on the right. You will have to also change the colour for one of the charts. As the default first colour for most of the colour groups is blue, you'll either have to choose 'fun' or a textured group. Remove the x-axis values from one of the charts. Align the two charts, group and resize to your preferred size. You might need to ungroup and then resize one of them again to get a proper fit. Bear in mind that once they're grouped, you can't make any cosmetic changes to the charts - although data changes will be properly updated.
Rather labour intensive, but sufficient until Apple gets its act together on this.

Similar Messages

Multiple Chart Types Question

I have a chart with 4 data series. The 1st 3 are column and the 4th is line. The line is removed on the 4th series to show up as a data point.
The data point for the 4th series shows up as in the middle of the 3 other series so it looks like the data point is related to the 2nd series. I'm curious what controls this behavior? Any way to shift it so it appears over the 1st series?
Thanks!

Closing Question
Assigning Points

Two diffetent chart types in one chart

Hi
Can anyone tell me how i put a line and bars in one single chart?
Regards.
Oliver

I don't think you can do it directly, but you can always set one on top of another, make the tops ones background invisible (No fill). make sure you select the object it self, not the individual chart objects only, and make its background (might be its "fill" property in the inspector) none. ( i am at a Windoze machine at work right now).
don't forget to make the charts background's also none.
just one idea. I just don't think there is multiple chart types in one chart yet. I might be wrong. Anyone at a mac that can verify for me?
Thanks alot everyone,
Jason

Getting all chart types in IChart

hai can some plz solve this problem
here im trying to plot the complete chart types of
Ichart in a single page with tag query.
for this i did it through simulator server i took One TagQuery , selected Mode as Taglist .And i took IBrwoser for list of tags with multi selection nd in that i enabled AlwaysExpandedMode and the Multiple Selection mode.Here im taking Chart types with select option in html and passing that variables into irpt file.in html page im taking list box of tag name for selecting tags and drop down of chart type for selecting chart type and one submit button for submiting the form.
for tagvalues im taking a array for counting the tag values nd passing it into irpt
that nd all fine
iam getting chart also but iam getting chart for only five values. so whats the problem im facing here is after refreshing if i select two tag values its getting replace with the first two values of previous chart .
so where im getting the problem could u plz let me know how to solve this problem
Thanks &Regards
Apsara

Hi apsara,
From what i understood, the problem seems to be that the array is getting overwritten. Is it true??? Can u be more clear on this??
Regards,
Sushma.

Custom components that accept multiple data types

The components that come with Flex, such as Datagrid, can
accept
multiple data types as a data source. For instance, you can
bind a
Datagrid to XML return from an HTTPService request or you can
build an
array and bind to that. I'd like to build my own component
that does
something similar, but I can't find any examples of this. I
don't
really even know what terms I'd search under to find it.
Can anyone out there give me any idea of how this is done?
Also, I'm a
bit hazy on how the column definitions you set up in the MXML
tag get
received inside the class. I'd appreciate any insight on how
this
works.
Thanks;
Amy

"Amy Blankenship *AdobeCommunityExpert*"
<[email protected]>
wrote in message news:[email protected]...
>
> "rvollmar" <[email protected]> wrote in
message
> news:[email protected]...
>> For the second part of your post, are you asking how
to set up columns in
>> ActionScript? e.g.
>>
>> private function setColumnConfig1(dg:DataGrid):void{
>> colArray = new Array();
>> var col1:DataGridColumn = new DataGridColumn();
>> var col2:DataGridColumn = new DataGridColumn();
>> var col3:DataGridColumn = new DataGridColumn();
>> var col4:DataGridColumn = new DataGridColumn();
>> var col5:DataGridColumn = new DataGridColumn();
>> var col6:DataGridColumn = new DataGridColumn();
>>
>> col1.dataField = "recordName";
>> col2.dataField = "image";
>> col3.dataField = "recordAmount";
>> col4.dataField = "who";
>> col5.dataField = "where";
>> col6.dataField = "when";
>>
>> col2.itemRenderer = application.ImageRenderer;
>>
>> colArray.push(col1);
>> colArray.push(col2);
>> colArray.push(col3);
>> colArray.push(col4);
>> colArray.push(col5);
>> colArray.push(col6);
>>
>> dg.columns = colArray;
>> }
>>
>> Or were you wondering, when one writes this in mxml:
>>
>> <mx:columns>
>> <mx:DataGridColumn ...>
>> ...
>> </mx:columns>
>>
>> how do you then have the control use that
information?
>
> The latter. But the fact is that I was misreading the
example I was
> looking at.
>
> <?xml version="1.0"?>
> 
> <mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml">
> <mx:DataGrid>
> <mx:ArrayCollection>
> <mx:Object Artist="Pavement"
> Album="Slanted and Enchanted" Price="11.99" />
> <mx:Object Artist="Pavement"
> Album="Brighten the Corners" Price="11.99" />
> </mx:ArrayCollection>
> </mx:DataGrid>
> </mx:Application>
> I was thinking the ArrayCollection was going to the
columns, but of course
> it is the dataProvider. Am I right in thinking that
internally the
> control has a defaultProperty metatag that enables the
contents of the
> parent DataGrid tag to just come in and populate the
dataProvider through
> PFM?Thanks;Amy
OK, I have looked at the source file, and it looks like the
[DefaultProperty] metatdata tag is at least not used in the
ListBase.as
class. So I am guessing it is either higher or lower in the
heirarchy...?
-Amy

Different chart types in one chart

Hi guys,
I need to know if there is any wat to mix two different chart types in WAD.
For instance, I have to key figures and I want to draw in the same chart Lines for one KF while I want Bars for the other KF.
Is this possible ?
Regards,

This is done using the Secodary Axis. Check the following link.
http://help.sap.com/saphelp_nw70/helpdata/en/0b/ac553bf3a76258e10000000a114084/content.htm

With Pages 5.2 how can i use multiple language types in a single document

My Macbook Air Has the version 10.9.3
I'm used to work with the old version of Page.
But now I am using the new version of Pages 5.2 (1860).
I want to know with the new version how do I use an multiple language types in a single document option.
In the old version of Pages I was using Inspector -> Text -> "More" tab -> Language: British Inglese.
In the new Pages 5.2 I do not know how to do it
Could you help me?
melo

It's not possible to tag text with multiple languages in Pages 5. Go back to Pages 4, which should still be in you iWork folder.
For the whole doc in Pages 5, use Edit > Spellling and Grammar > Show Spelling and Grammar.

View for multiple Content Type List

Hello
I have a SP list with multiple Content types.
i want add a kind of view for the list that have diffrent content types for the some item/record.
it means that every time someone edit this item and change/add diffrent data in diffrent contant type
is there any way to do that?
or there is a way to add the Content type dropdown list in Display view and not just in Edit view? can i do it in SP Designer?

Hi Avinoam, do you have access to InfoPath? You can do what your asking with that program.
cameron rautmann

Multiple Display Types in a single column

I have a situation where I have to display a bunch of attributes for a customer. Each attribute can have a different type, Text, Dropdown, Date etc and that information is stored in a table.
I was able to use apex_item to display the different display types based on the type of attribute.
So the layout of the form has 2 columns, column 1 is the name of the attribute and column 2 is the value of the attribute (displayed as the various types of date, text, dropdown etc) However, I am having an issue with the Date popups. When I select a date it always goes into whatever date is listed first. No sorting is going on in the select or the report.
I'm guessing my issue has to do with displaying different display types in the same column? If that is true, how should I change my approach to this problem? I want all the attributes on a single page, so is my only option to have each attribute in a different region?
Thanks,
-- Johnnie

Denes,
OK thanks for the heads up, let me try to clarify.
My problem is that I have multiple date popups on the same form. When I pick a date for any of the date popups, it always updates the first date popup field on the form. I stated there was no sorting at all because this thread indicated that sorting could cause this issue:
DATE_POPUP
Another hit for this issue was here:
Re: HTMLDB_ITME.DATE_POPUP problems
This suggested that having multiple data types in the same column (which is what I am doing) is not supported, but this is an old thread.
My form will be a manual tabular form. I need to display a list of attributes, however some are freeform text, some are SQL LOV dropdowns, and some are date popups. Right now they are all displayed in the same column. Could this be causing my date popup issue? If so what alternatives do I have?
Screenshot of my form here: http://johnniebillings.googlepages.com/outlook.jpg
Hope that clears up the issue I am having.
-- Johnnie

Ipad 4: how do I attach multiple file types to an email?

Hello,
I have seen multiple threads on this topic saying you can only do attachments in an email (other than photos or videos) by going to the app that holds the file and emailing it from there (ex: go to adobe reader or ibooks to email a PDF). This work around seemed sufficient for some people but I have need to attach a JPG, PDF and .doc to a single email. How do I do this within the ipad's built in email app? Is this impossible and if so are there other free email apps that someone can reccmmend?
I find the ability to only email files from within its parent app to be cumbersome and not in keeping with Apple's style of making one's life easier and more efficient. In fact this seems woefully backward and goes back to the early days of computing. I get it that emailing from within a particular app is necessary but so is the ability to attach multiple file types from within the email app. :-(
So frustrated!!

The GoodReader App can manage files and create emails consisting of multiple files types.
See here: https://itunes.apple.com/us/app/goodreader-4/id777310222?mt=8

Is it possible to add multiple charts in a single visualization?

Hi All,
I would like to know whether we can display multiple charts (line, column, etc) inside a single 'Visualize' screen.
I am using:
SAP Lumira
Version: 1.15.1
Build: 879
This will help in situations where we need to compare 'month on month' values for sales and demand data to be displayed side by side instead of different Visualization screens
Regards,
Chinmay

Hello Chinmay - that is what Storyboards are for
See SAP Lumira 1.12.0: Create a storyboard

Using Multiple Object Types in a FIM Managed Criteria Distribution Group

Is it possible to use multiple object types in a criteria based distribution group. So when building your criteria filter, "Select (object type) that match (all/any) of the following condiftions". Currently you can only choose 1 object type and
I want to be able to choose object type "user" and a custom object type I create for my contacts

You can create main condition as "any" and later add two sub-conditions - one that object in set "All People" and other sub-condition that object in set "All Contacts" or "All Groups".
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Multiple Return Types

haven't been around in a while, so I thought I'd stir up some comments with a suggestion for a new feature in Java, which I'm sure has been suggested at some point, but I can't remember seeing it talked about, so here goes:
Multiple Return Types:
public String, int getStateInfo(String abbrev) {
   if("nj".equalsIgnoreCase(abbrev)) {
      return "New Jersey", 11408042;
   // ... and other states...
   return null, -1;
String name, int population = getStateInfo("nj");
System.out.println("The population of " + name + " is " + population + ".");Yes yes, I know. Create a StateInfo object with the fields needed. Still, I think that could be interesting.

apart from it getting ugly with more than twoparameters
What? How is this ugly? ;-)
public String, int, String, Color, String, String
getStateInfo(String abbrev) {
return name, population, stateFlower, stateColor,
or, stateAnimal, governorsName;
there no indication on what the return valuesrepresent.
Well, I guees the API docs would have to speak for
themselves. Or better method naming... In that
sense, it's no different then now. I could write a
method "getStateName()" and return totally different.
public String, int getStateNameAndPopulation(String
abbrev) {...
I used to like "tuples" when I studied The Tom Programming Language (that's how he calls them), as every CS student is a bit of a "featurist"... Now that I came to develop 40 hours a week and to love Java's simple and powerful expressiveness, I tend to find such constructs overly ugly to be avoided as possible... a matter of personal taste, too, I suppose...

MIGO Goods Receipt multiple Movement Types?

Hi,
Is it possible with MIGO Goods Receipt using Inbound Deliveries to have multiple movement types? the reason I ask is I am getting the following error 'BORGR622 Movement Type XXX not allowed; only 101 is allowed' when trying to receipt a Line no. with different Movement Type to the earlier lines.
We do have the same problem if we receipt in MIGO Goods Receipt directly to the Purchase Order, we can happily post a document which has the normal '101' movement type and another Custom movement type.
The reason for the requirement is to do with Account Determination, we have free bonus goods lines which are zero price on the purchase order - the price difference gets posted to a bonus stock account instead of the usual price difference account, by using a Custom Movement Type - the bonus stock agreement (kind of like BOGOFs Buy One get one free) is passed to the Customer with similar account determination updating the same bonus stock account.
This works fine for MIGO receipt directly with the Purchase Order but we get the error message above with Inbound Deliveries.
I cannot see anywhere obvious in config which might sort this issue, but am unsure why multiple movement types on a Goods Receipt would be allowed against a Purchase Order but not an Inbound Delivery.

Hi,
Try with the below mentioned settings,
goto SPRO -> Materials Management -> Inventory Management & Physical Invetory -> Settings for enjoy transactions -> Settings for good movements(MIGO) -> Settings for transactions & reference documents -> select MIGO_GR -> Click on transaction/event -> select goods receipt -> click on reference documents -> remove the tick mark on active.
Regards,
Prabu

My daughter had completed a chart in pages. I saved it and then clicked on other chart types. Now I can't go back to the original chart she made even though I have not re-saved the file. How can I go back to her original chart with data?

My daughter had completed a chart in pages. I saved it and then clicked on other chart types. Now I can't go back to the original chart she made even though I have not re-saved the file. How can I go back to her original chart with data?

I don't get what you are saying.
Is this all the same document?
What version of Pages?
Have you tried to revert to a previous version?
Peter

Multiple Chart Types

Similar Messages

Maybe you are looking for