Multiple customer part number in VD51

Hi we are maintaining customer part number in VD51for our SAP part number. ONE TO ONE for  a particular customer is possible.  but we need to maintain more than one customer part number for the same SAP part number and same customer is it possible is there any other way to achieve this ...b'cos our customer name same part A as X in one project and Y in another project . they gave order by their part numbers only

As long as the customer code is going to be the same, you cannot maintain multiple customer material codes against one SAP material code.  But you can cheat the system which I would not recommend :-((, by giving some space before the customer material code.
thanks
G. Lakshmipathi

Similar Messages

  • Customer part number to be printed on the output

    The system shall automatically display/print customer part number or product name on document output.

    Hi,
    Your document output depends on Output program attached to your output condition type.
    So if the field Customer Material Number/ Part Number ( VBAP -  KDMAT) is to be printed for the document output.
    Ask your abap consultant to add this field in the output program and form
    Field name
    VBAP -  KDMAT
    regards,
    Ashish

  • How to update the customer part number in SAP as customer parts.

    Hi MM Gurus,
    Our client has customer parts at their shopfloors and they need to update those parts as customer parts. Please advise how to do it in SAP.
    Thanks and Regards,
    Madelyn

    Hi,
    You can receive Customer provided parts in your Shop Floor in MIGO. Here use movement type 501 and do Goods Receipt > Others.
    Also Create your customer materials as non valuated material, because these materials not effecting the our inventory. And also create a separate storage location (in OX)9) for the Customer and do GR in this location, this will give tracking of Customer's Stock.

  • Customer Material Number to be mandatory in VD51/52

    Hi,
    There is a requirement to make Customer Material Number (KDMAT) mandatory while creating CMIR through VD51 or VD52 transactions.
    I tried, but couldn't find any user exit or BADI for the same.
    Can anyone suggest, is there a way to achieve it?
    Regards,
    Aslam.

    Hi Mohammed,
    Try Implicit Enhancement for the particular screen. If available, check whether the field is Initial, based on that allow the system to proceed further steps.
    Also SHD0, please find the link below.
    How to Create a Transaction Variant
    Regards
    Rajkumar Narasimman

  • I just downloaded 15 songs, almost half will only play parts of the songs. Some only will play 2 seconds!! How do I fix this? Apple doesn't exactly have a customer service number and I've already paid for my purchases. This has never happened before.

    I just downloaded 15 songs to my ipod and only about half will fully play. The others only play a minute or two with some only playing for seconds. I have never had this happen before. There isn't exactly a customer service number for apple so I'm not sure what to do. I'm pretty irritated sonce I've paid for all of them. Please help!!!

    I would delete them from your library and then redownload them from the iTunes Store.
    Steps/instructions on how to redownload them can be found here:http://support.apple.com/kb/HT2519

  • Mid-2010 MacBook Pro 15" 2.8 GHz Logic Board Part Number

    Hi all,
    I have been searching for a few hours trying to find the part number for the logic board one of my MBPs.  I, unfortunately, have the Mid-2010 15" MBP with the bad GPU that results in endless kernel panics.  (I also had the first Pentium chip, the pentium 60 with the floating point error in 1995 too).  I upgraded the MBP to the 2.8 GHz, core i7 (2 core) processor when I ordered it in 2010.
    Anyway, the apple tech guide exploded view does not show the part number for the 2.8 GHz.  It only shows the part numbers for the other 3 configurations - 2.4, 2.53 and 2.66.  I took the cover and discovered my my EEE code is "QAG".
    I have just started trying to figure this issue out (too much time has passed and Apple will charge me to fix).  I want to try and find a replacement logic board and do it myself.   Does anyone have an idea what my part number is for the logic board?  None of the sites I searched have a 2.8 GHz board listed just 2.66.
    An alternative question - In my PC building days, some motherboards were compatible with multiple speeds of main processors.  My computer model number
    MC373LL/A
    is the same as the 2.66GHz model.  Does the 2.66 GHz logic board support the 2.8 core i7 too?  I don't want to screw up and order the wrong part.
    OSX Yosemite is installed.
    Thanks,
    Tony

    http://www.powerbookmedic.com/MacBook-Pro-15-Unibody-28GHz-Core-i7-Logic-Board-p -36842.html

  • Delivery creation based on Customer PO number

    Hi Friends,
    My requirement is like this
    suppose i have 5 Sales orders - S1, S2, S3, S4 & S5.
    If Customer PO numbers in S1, S3, S5 are P1 &
                                            S2 & S4 are P2.
    Then there is a background Job which runs a Program
    RV50SBT1 (Transaction VL04) which creates the delivery.
    Now the Problem is that Only those sales Orders with same Customer PO Number (S1,S3 & S5 With Cust PO number - P1) should be combined in 1 delivery say D1 and (S2 & S4 With Cust PO number - P2) in another delivery D2.
    all sales orders have same shipping point say SHP1. Now i have to write the Logic in some user exit and VL04 creates a delivery and how can i write the logic such that 2 deliveries are created in this case.
    Thanks in advance

    Hello,
    Can a Sales order have more than one Customer PO number?
    Is it possible to split the delivery order into as many number of
    Customer PO numbers in the sales order?
    For the Sales Order type in t-code VOV8, please use the option called "Check purch.order no" and leave this field blank and you can go for multiple Sales Order with a single Customer PO number.
    Coming to your second query, Could you please refresh your question as there is lack of clarity on the requirement ? I mean do you mean to split the Delivery Document on the basis of PO number at the item level ? For this you can go for a requirement and attach this requirement in the copying control between Sales Order Delivery Document in VTLA.
    Regards,
    Sarthak

  • Windows 7 64 Bit drivers for Toshiba Satellite C55-A5180 part number PSCJEU-00F001

    Toshiba Satellite C55-A5180 part number PSCJEU-00F001
    Drivers needed to install Windows 7 64 Bit on Satellite C55-A5180 part number PSCJEU-00F001
    Edited to add new location for the video driver
    Drivers where downloaded from here http://support.toshiba.com/support/modelHome?freeText=1200008363
    And here
    http://www.toshiba.eu/innovation/download_drivers_bios.jsp?service=EU&selCategory=2&selFamily=2&selS...
    And here
    http://support.toshiba.com/support/modelHome?freeText=1200007439
    And Intel page here
    Intel HD graphics driver  http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
    Toshiba Driver installation instructions
    http://support1.toshiba-tro.de/tedd-files2/0/install-20140521160649.zip
    Intel Chipset SW Installation Utility http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40216100a.exe
    Intel Trusted Execution Engine Interface
    http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40215000b.exe
    This post has the video driver - Here 
    Intel® Iris™ and HD graphics Driver 15.33.22.64.3621 for Windows* 7/8/8.1 64-bit
    down the page you will find the driver - win64_153322.exe
    Realtek Card Reader
    http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40217200c.exe
    RealTek LAN Driver
    http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40215100c.exe
    RealTek wireless LAN Driver
    http://support.toshiba-tro.de/tools/eula/calleula.asp?ID=91194
    USB3.0 Driver
    http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40219400c.exe
    Synaptics TouchPad Driver
    http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40213500e.exe
    After installing I had to enter the file and run from setup.exe because it did not install from the Toshiba installer, it only unzipped the file and saved it.
    You may want to try this older Synaptics touch Pad Driver
    http://support1.toshiba-tro.de/tedd-files2/0/tpdrv-20130730102013.zip
    Toshiba Value added Package
    http://support1.toshiba-tro.de/tedd-files2/0/vap-20130916115251.zip
    Toshiba Service Station
    http://support1.toshiba-tro.de/tedd-files2/0/sest-20130730134053.zip
    Toshiba PC Health Monitor
    http://support1.toshiba-tro.de/tedd-files2/0/pchm-20130730130641.zip
    Toshiba HDD/SDD Alert Utility
    http://support1.toshiba-tro.de/tedd-files2/0/hdsdal-20130730121320.zip
    Toshiba Peakshift Control
    http://support1.toshiba-tro.de/tedd-files2/0/tpsctrl-20130916091602.zip
    Toshiba HW setup (Hardware setup)
    http://support1.toshiba-tro.de/tedd-files2/0/thws-20130916090522.zip
    Toshiba Disc Creator
     http://support1.toshiba-tro.de/tedd-files2/0/dcr-20130730110923.zip
    Toshiba Web Camera Application works for windows 7 or 8
    http://cdgenp01.csd.toshiba.com/content/support/downloads/TC30463200A.exe
    Toshiba Video Player
    http://cdgenp01.csd.toshiba.com/content/support/downloads/tc30647200a.exe
    Toshiba recovery media creator
    http://support1.toshiba-tro.de/tedd-files2/0/trmc-20130730133957.zip
    All programs seam to work except HWsetup. Flashcards show up when using special function keys except for the volume, the volume special function keys work to turn volume up and down but you don’t see the flash cards, and of course there is no recovery partition so the recovery media creator cannot burn recovery media.
    Updated to show instructions and pictures 8-24-2014
    Instructions for changeing to from Windows 8 to windows 7.
    INSTRUCTIONS:
    First - Burn recovery media before you make any changes! -You may want or need to go back to windows 8 later-
    Update BIOS to newest bios version, the C55 and possibly other models will not support CSM boot mode with the older bios versions.
    Second -
    Important Bios changes when changing from Windows 8 to Windows 7:
    Completely shut down laptop (Shut down Windows 8 while pressing the Shift key to completely power off.) then restart computer and hold f2 when the screen goes black and wait for the bios setup utility to launch.
    Select advanced, then system configuration, then boot mode
    UEFI and CSM or legacy  (UEFI for Windows 8 and CSM or legacy for windows 7)
    For windows 7 change to CSM or Legacy mode.
    Third - Also in bios setup utility select - Security, then Secure Boot, then you have to disable secure boot for windows 7.
     You will need to delete all partitions before installing windows 7 this is done forth step.
    Forth - Insert your windows 7 disc and select custom install, your partitions should show up - click on each one and below you will see advanced drive options, click that and you will have options to format - format each one, then delete each one. You will be left with one raw partition, select to install and windows will do the rest while installing the operating system.
    Fifth - install drivers
    Installation order is important:
    Install chipset driver then video driver before other drivers. Then install Toshiba Value added package before other applications
    -See attached pictures that show installed applications-
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****
    Solved!
    Go to Solution.
    Attachments:
    programs5.png ‏1040 KB
    programs3.png ‏193 KB

    That should work as well for all the models in part-number family PSCJEU. At least these, probably more..
        Satellite C55-A5104 (PSCJEU-00K00R)
        Satellite C55-A5105 (PSCJEU-00K018)
        Satellite C55-A5180 (PSCJEU-00F001)
        Satellite C55-A5190 (PSCJEU-00L001)
        Satellite C55-A5140 (PSCJEU-00K001)
        Satellite C55-A5137 (PSCJEU-036012)
        Satellite C55T-A5123 (PSCJEU-01G00Q)
    -Jerry

  • Satellite Pro A10 - need a part number for compatible power adapter

    My son has the older Toshiba Satellite Pro A10 Intel Celeron 2.0GHZ 256MB 30 GB DVD/CD-RW 14tft monitor.
    His power supply is no longer working , can anyone tell me the power adapter part number as i am looking for a new one for him.
    I need a part number to go on, and any other compatable power adapters numbers.
    Appreciate any help given.
    Thanks
    jane

    Hi Jane,
    I believe the part number you need is PA3283E-2ACA
    Check it out on the following link :-
    http://www.ebuyer.com/customer/products/index.html?action=c2hvd19wcm9kdWN0X292ZXJ2aWV3&pro duct_uid=64945&_LOC=UK

  • What part number for storEdge power cables?

    I purchased a used StorEdge cabinet like the one pictured below.
    [http://imgur.com/kdnNM.png]
    No cords were included. I'm wondering:
    1. What part number is the external power cord? (red circle)
    2. What part number(s) fit the internal power connectors
    3. Would the power output of the internal connectors be sufficient/correct to distribute power to various non-sun servers?
    4. What is the purpose of the connections in the blue circle
    Thank you in advance for your help.

    You are welcome.
    This is peer to peer help forum. The only presence that HP has on it are the Admins and the Mods. Otherwise, none of us works for HP.  I suggest contacting HP Customer Service to see if the part is available.  I couldn't find it anywhere.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • What's the Part Number for an IdeaPad S12 recovery disk?

    Hello,
    I have an IdeaPad S12 (NVidia Ion). The recovery partition is gone. What's the part number for the recovery disk?
    I mainly work with ThinkPad systems and Lenovo has an excellent part number system that covers just about every part you could imagine on a ThinkPad laptop. I assume Lenovo is also using this or something similar for it's consumer-line laptops. Sadly, Lenovo doesn't treat it's consumer laptop line with the same dignity as the ThinkPad line, and no customer support agent would tell me the part number, so I'm resorting to the forum for finding it.
    Please help.

    Hi and welcome,
    the ideapad as consumer-line has no part list ....as the thinkpads have...
    regards KalvinKlein
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • SR520W-FE-K9 AC Adapter Replacement Part Number

    Anyone help me get the part number on the AC Adapater and US AC adapter power cable part numbers for the SR520 router? I have a customer that "lost" both and needs a replacement. Any help is appreciated. I looked all over Cisco's documentation for the part number, but could only find CAB-AC2 which only appears to be the AC power cord not the adapter.
    Thank you in advance for your help.

    Hi Michael,
    The SR520-FE uses the same power supply as the 870: PWR-850-870-WW1=
    This can be used with a 2 pin CAB-AC2 mains lead
    Hope that helps,
    Andy

  • Vendor part number for non catalog item in shopping cart?

    I have a requirement to get the vendor part number field in shopping cart basic data for non catalog item. This field is available for catalog items, would it be possible to make the same field available for non catalog items as well?

    Hi Gummadi,
    You can create custom fields in Shopping cart uisng a BADI and can populate the information.
    BBP_CUF_BADI can be used to create customer fields.
    Please get discuss with your ABAP fellow for the creation of customer field.
    Award points for helpful answers.
    Rgds,
    Teja

  • Supplier Part number not transferred to R/3

    Hello
    The supplier catalog when used for a purchase order is not bringing up the supplier part number. The Supplier Part Number not transferring to the back-end .
    Can anybody help me please?
    Best Regards.
    Jayawant

    Hi
    The field name is either MFRPN or what ? check whether the field is having any data, by holding a shopping cart by ITS and then doing the debugging in SRM GUI itself.
    Is that field value is available on the SRM side, once the user is shopping from Catalog in ITS side. Please confirm the same by debuuging in ITS inside the
    BBP_DOC_CHANGE_BADI  ( inside The custom Implementation you have created  in your system)
    and incase its available, you need to pass the data coorectly by mapping / transfer the same by transferring it to R/3 by implementing the BADI - BBP_CREATE_PO_BACK.
    Let me know your views as well.
    Hope this will help.
    Pls reward suitable points.
    Regards
    - Atul

  • Slice battery craziness-What part number IS it???

    Last September we purchased 5 slice batteries for our X230 systems.  One of them went bad about a month and a half ago, and I opened a warranty replacement ticket with Lenovo but they can't find a replacement battery to ship me (it's been out of stock for about 6 weeks now).  They shipped out an incorrect battery at first, and I am getting the run around with various warranty, tech support, shipping, and status departments (I've been transfered to them all, have to explain my situation over and over again, only to get more confusion each time).
    The battery I have has TWO part numbers printed on it, but they can't seem to ever cross reference these part numbers with the battery.  The place we ordered these batteries from (CDW) have a Manufacturing Part number which is a completely different part number and which is NOT printed on the battery itself anywhere.  Then, I just got off the phone with another person at Lenovo who gave me a slightly different part number, and then another part number (5 so far).  How can there be so many different part numbers for the same battery and how can Lenovo not be able to cross reference them?
    On the battery itself, I have two part numbers (again, why two???)
    FRU P/N:  42T4967
    ASM P/N:  42T4904
    Then, there is a manufacturer part number (not listed on the battery anywhere) 0A36280
    Then there is a fourth part number they gave me which is 42T4903
    Then they gave me another part number of 45N1035
    How can this be so complicated and why so many part numbers?

    jbobst,
    Given the time elapsed since purchase, this would generally need to be addressed through service.  Service will deal exclusively with FRU or field replacement units.
    During product life, we may introduce newer versions of a component or we may have an alternate supplier which can have a different FRU number but be functionally interchangable.   When newer parts are released, generally the older FRU subs to the newer one so if you order the older number on a product, if we are out of stock on that, the newer one can be sent instead.  Forward substitution.
    I'll agree that this can be confusing and we try to make this seamless for the customer as much as possible.
    Let me look into this overnight and see what we can do to locate stock.   I'll work with bgriffin on what we can do to accelerate this for you.
    Best regards,
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Maybe you are looking for