Multiple data feeds

In the discover product catalog application, while performing a baseline load, recordstore_data.xml gets updated to MDEX engine. If i need to add another data xml, say for e.g recordstore_data2.xml, is it possible?
- Bing

Are you using a relatively recent product catalog integration version? If so then it uses CAS as a data repository, and you need to modify the various parts to create the repository, load it with data, then finally read that new data source in, so something like:
1. create a new record store definition in ./config/cas/*_cfg.xml
2. modify ./control/initialize_rs_feeds.[bat|sh] to initialize the new record store
3. load the data via ./control/initialize_rs_feeds.[bat|sh]
4. add a new record adapter to pull this data in via CAS (and a record assembler component to join it together with the original source - if you just want to "merge" the two sets together, use a Switch join)
HTH
Michael

Similar Messages

Multiple data feeds to Informatica from SAP BI

Guru's,
I have the need to push multiple data streams out of our SAP BI system into Informatica. I can move a single Open Hub Destination in a process chain, but have the need to run multiple OHD's in the same process chain.
I have tried doing this with a single ABAP 'Send Status' program, and with multiple ABAP 'Send Status' programs without success. I have also tried executing the steps in parallel or in series, also without success.
Any information/help would be appreciated.

OK according to Informatica support, this feature is not available at this time.

PowerPivot - refresh excel with Data Feed

Dear all,
I created a PowerPivot chart out of a SharePoint exported list to Data Feed.
I then published it to a trusted Document Library.
The Chart is working well but is not updating.
So if I go to the document library and on the drop down meny of the publsihed excel file I choose Manage PowerPivot Data Refresh and force it to refresh, it fails with the following error message>
Errors in the high-level relational engine. The following exception occurred while the managed IDbConnection interface was being used: The remote server returned an error: (401) Unauthorized.. A connection could not be made to the data source with the DataSourceID
of '3b4d4c28-909c-47d3-b4d6-07684f5e2ee9', Name of 'DataFeed mywebapp.domain TestPowerPivotDataFeed'. An error occurred while processing the 'testPowerPivot' table. The operation has been cancelled.
On the SQL Server I ran a profiler and got the follwoing:
exec [DataRefresh].[AddRunDetails] @RunID=54,@DataSourceID=N'3b4d4c28-909c-47d3-b4d6-07684f5e2ee9',@FriendlyName=N'DataFeed mywebapp.domain.local TestPowerPivotDataFeed',@Source=N'http://portal.gonzofish.local',@Provider=N'Microsoft.Data.DataFeedClient',@Catalog=N'dev/scrum/Data
Feed Library/TestPowerPivotDataFeed.atomsvc',@ConnectionString=N'Data Source=http://mywebapp.domain.local/dev/sc/Data%20Feed%20Library/TestPowerPivotDataFeed.atomsvc;Integrated Security=SSPI;Persist Security Info=false;Namespaces to Include=*;Service Document
Url=http://mywebapp.domain.local/dev/sc/Data%20Feed%20Library/TestPowerPivotDataFeed.atomsvc',@Result=N'F',@RunStartTime='2014-06-04 15:33:04.590',@RunEndTime='2014-06-04 15:33:04.727',@Comments=N'Errors in the high-level relational engine. The following exception
occurred while the managed IDbConnection interface was being used: The remote server returned an error: (401) Unauthorized..
A connection could not be made to the data source with the DataSourceID of ''3b4d4c28-909c-47d3-b4d6-07684f5e2ee9'', Name of ''DataFeed mywebapp.domain.local TestPowerPivotDataFeed''.
An error occurred while processing the ''testPowerPivot'' table.
The operation has been cancelled.
I followed the link http://technet.microsoft.com/en-us/library/hh487291%28v=office.14%29.aspx to set up the Data Refresh for the PowerPivot.
Thanks in advance.
Regards,
Gonçalo
Gonçalo

http://social.technet.microsoft.com/Forums/windows/en-US/082a62f2-77b6-41c9-be94-09cf06622d4e/powerpivot-refresh-error-on-workbook-using-a-data-feed-from-sharepoint-list
You configured the PowerPivot unattended data refresh account, but now data refresh is failing. Check for these possible conditions:
Choosing the wrong credentials option in the schedule data refresh page.
Insufficient permissions on remote computers or data sources.
Follow the steps below to re-add the unattended data refresh account and see how it works:
1. Create a Data feed library .
2. Upload the local copy of you data feed to there.
3. Open up your report and change the connection.
4. Use Secure Store Service by adding your unattended PowerPivot refresh account.
If still no help, for quick and accurate answers to your questions, it is recommended that you initial a new thread in our SQL server forum.
SQL server forum
http://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver
Meanwhile, there are some articles about troubleshooting PowerPivot data refresh issue for your reference, please see:
Troubleshooting PowerPivot Data Refresh:
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshooting-powerpivot-data-refresh.aspx
http://technet.microsoft.com/en-us/library/gg399164.aspx

PowerPivot in SharePoint 2010 - Refresh Excel with Data Feed does not work

Dear all,
I created a PowerPivot chart out of a SharePoint exported list to Data Feed.
I then published it to a trusted Document Library.
The Chart is working well but is not updating.
So if I go to the document library and on the drop down meny of the publsihed excel file I choose Manage PowerPivot Data Refresh and force it to refresh, it fails with the following error message>
Errors in the high-level relational engine. The following exception occurred while the managed IDbConnection interface was being used: The remote server returned an error: (401) Unauthorized.. A connection could not be made to the data source with the DataSourceID
of '3b4d4c28-909c-47d3-b4d6-07684f5e2ee9', Name of 'DataFeed mywebapp.domain TestPowerPivotDataFeed'. An error occurred while processing the 'testPowerPivot' table. The operation has been cancelled.
On the SQL Server I ran a profiler and got the follwoing:
exec [DataRefresh].[AddRunDetails] @RunID=54,@DataSourceID=N'3b4d4c28-909c-47d3-b4d6-07684f5e2ee9',@FriendlyName=N'DataFeed mywebapp.domain.local TestPowerPivotDataFeed',@Source=N'http://portal.gonzofish.local',@Provider=N'Microsoft.Data.DataFeedClient',@Catalog=N'dev/scrum/Data
Feed Library/TestPowerPivotDataFeed.atomsvc',@ConnectionString=N'Data Source=http://mywebapp.domain.local/dev/sc/Data%20Feed%20Library/TestPowerPivotDataFeed.atomsvc;Integrated Security=SSPI;Persist Security Info=false;Namespaces to Include=*;Service Document
Url=http://mywebapp.domain.local/dev/sc/Data%20Feed%20Library/TestPowerPivotDataFeed.atomsvc',@Result=N'F',@RunStartTime='2014-06-04 15:33:04.590',@RunEndTime='2014-06-04 15:33:04.727',@Comments=N'Errors in the high-level relational engine. The following exception
occurred while the managed IDbConnection interface was being used: The remote server returned an error: (401) Unauthorized..
A connection could not be made to the data source with the DataSourceID of ''3b4d4c28-909c-47d3-b4d6-07684f5e2ee9'', Name of ''DataFeed mywebapp.domain.local TestPowerPivotDataFeed''.
An error occurred while processing the ''testPowerPivot'' table.
The operation has been cancelled.
I followed the link http://technet.microsoft.com/en-us/library/hh487291%28v=office.14%29.aspx to set up the Data Refresh for the PowerPivot.
Thanks in advance.
Regards,
Gonçalo
Gonçalo

Hi Gonçalo,
The error message shows that the account didn't have sufficient permission access to the data source(SharePoint List data feed). PowerPivot data refresh is performed by Analysis Services server instances in the SharePoint farm, we may need to grant the
account running SQL Server Analysis Services (POWERPIVOT)
Read permissions to the SharePoint list we are attempting to refresh.
In addition, the external data sources that are accessed during data refresh must be available and the credentials you specify in the schedule must have permission to access those data sources.
For more information, please take a look at the following article:
Schedule a Data Refresh:
http://technet.microsoft.com/en-us/library/ee210651(v=sql.110).aspx
Hope this helps.
Elvis Long
TechNet Community Support

PowerPivot report data refresh error Data source as SharePoint list Data Feed

Hi All,
I am facing a problem on auto refresh, the report data source is SharePoint list Data Feed, I saved it my PC desktop when I set up auto fresh it fails then I moved the SharePoint list data feed "atomsvc" file to A SharePoint Data feed library then connected
to report started a manual refresh it was success, after next schedules it failed.
Error massage:
Errors in the high-level relational engine. The following exception occurred while the managed IDbConnection interface was being used:
The network path was not found. ;The network path was not found. The network path was not found. .
A connection could not be made to the data source with the DataSourceID of '82f49f39-45aa-4d61-a15c-90ebbc5656d',
Name of 'DataFeed testingreport'. An error occurred while processing the 'Testing Report' table. The operation has been cancelled.
Thank you very much !
erkindunya

If you are using Claims Auth then this is a known limitation. Auto refresh only works under Classic Auth.
I trust that answers your question...
Thanks
C
http://www.cjvandyk.com/blog |
LinkedIn | Facebook |
Twitter | Quix Utilities for SharePoint |
Codeplex

Refresh Data feed error in Excel Workbook

Hi
I am getting the error
Errors in the high-level relational engine. The following exception occurred while the managed IDbConnection interface was being used The payload kind 'BinaryValue' of the given data
feed is not supported.. A connection could not be made to the data source with the DataSourceID ...
The excel workbook was earlier configured using the data feed which was not stored in a data feed library. I then created the data feed library, placed the data feed in it and edited the connection
to the new path.
I am getting the above error now. Please help

Hi,
According to your description, my understanding is that the error occurred when you configured the workbook to use the data feed in a data feed library.
Did this issue occur with all the Excel workbooks which use the data feeds in the data feed library?
I recommend to create a new workbook to use the data feeds in the data feed library following the steps in the link below to see if the issue still occurs:
http://technet.microsoft.com/en-us/library/gg413490.aspx#importdata
Please also check if the data feed is created correctly referring to the link below:
http://technet.microsoft.com/en-us/library/ee210624.aspx
If still no help, for quick and accurate answers to your questions, it is recommended that you initial a new thread in our SQL server forum.
SQL server forum
http://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Increase performance in a multiple data source report

Post Author: ArturoFromPeru
CA Forum: General
Hi everybody.
I have a big problem, when i make a report that have multiple data sources the performance decrease considerably, i still don't know the reason. Is it true that using multiple data sources is too slow?.
I tell you a fact: I made the report connecting via "Field Definition File", and it take at least 2 minutes to show itself but it only have 170 records, and i'm very sure that the sql statements to each data source were executed very faster.
I even heard about index, but i think they only are useful when i connect directly to the database.
All my partner told me, that Cristal Report
Thanks you in advance
Regards.
Arturo

Post Author: ArturoFromPeru
CA Forum: General
Thanks you, but I explain better what i was doing.
I've made a report called "Kardex de Producto" which show the behavior of the products according to its sales, purchases.
The end result which is showed by the report is correct. I used three data source in the report, so links between each table is correct. The only problem i have is the performance because i still don't know why is too slow. In fact the sql statement is very heavy, but i think it doesn't matter to the report because when it takes the data from the database (connecting via Field Definition File) even if the very heavy sql statement returns twenty record Cristal Report must show itself very quickly. I don't want to believe that Cristal Report is very slow when it works with multiple data sources.
Do you mind if i give you my report? if not please leave me your email address.
Email: [email protected] / [email protected]
Thank you in advance
Regards
Arturo

Report Viewer and Multiple Data Sources

I know that it is possible to create a report in Crystal Reports using multiple data sources. But is it possible to use just the Free Report Viewer to view a report with Multiple Data Sources?
Our company uses Crystal Reports XI. I do not use the program myself, I am in the IT Department. I have limited knowledge of Crystal and do not do any of the report writing.
If this is possible, and if someone could help me out with what would need to be done, or point me in the right direction of a Knowledge Base or Help Topic that explains this, that would be great.
Thanks.

I believe it can but both data sources need to be set up. Ask a report designer to help you use the Designer to test this and see what is required.

Any examples of a data template using multiple data sources?

I'm looking for an example report using multiple data sources. I've seen one where they do a master/detail but I'm just looking to combine results in sorted order (sorted across all data sources). The master/detail used a bind variable to link the two defined queries, I'm thinking what I want won't have that, so I'm lost on how to make that happen. I have reports using multiple sql queries and there is a way in the data source pulldown to tell it to combine the data sources. It appears to be a more manual process with data templates, if it's even possible.
Any pointers/links would be appreciated.
Gaff

Hi Vetsrini :
That's just it. Mine is simpler than that. There is no master/detail relationship between the two queries. I have the same exact query that I run in two databases and I want to merge the results (ordered, by, say eventTime) in one report. So I think my results are going to be two separate groups (one for each data source) which I'll have to let BI merge vis XSLT or whatever it uses. That's fine for small result sets but for larger ones, it would be nice if the database did the sorting/merging.
Gaff

How to retrieve multiple data from table and represent it in jsp page

Hi
The below JavaScript code is used to add row in the table when I want to add multiple row data into table for single entry no field.
<html> function addRow()
            i++;
            var newRow = document.all("tblGrid").insertRow();
            var oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='srno"+i+"' type='text' id='srno"+i+"' size=10>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='itmcd"+i+"' type='text' id='itmcd"+i+"' size='10'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='itmnm"+i+"' type='text' id='itmnm"+i+"' size='15'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='indentqty"+i+"' type='text' id='indentqty"+i+"' size='10'>";
            oCell = newRow.insertCell();
                oCell.innerHTML = "<input name='uom"+i+"' type='text' id='uom"+i+"' size='10'><input type='hidden' name='mcode"+i+"'id='mcode"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='packqty"+i+"' type='text' id='packqty"+i+"' size='10'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='packuom"+i+"' type='text' id='packuom"+i+"' size='10'><input type='hidden' name='pack"+i+"' id='pack"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='rate"+i+"' type='text' id='rate"+i+"' size='10'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='dor"+i+"' type='text' id='dor"+i+"' size='0' onClick='"+putdate(this.name)+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='bccode"+i+"' type='text' id='bccode"+i+"' size='10'></td><input type='hidden' name='bcc"+i+"' id='bcc"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='cccode"+i+"' type='text' id='cccode"+i+"' size='10'></td><input type='hidden' name='ccc"+i+"' id='ccc"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='remark2"+i+"' type='text' id='remark2"+i+"' size='20'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input type='button' value='Delete' onclick='removeRow(this);' />";
           // oCell = newRow.insertCell();
           // oCell.innerHTML = "<input type='button' value='Clear' onclick='clearRow(this);' />";
        }<html> Then this data are send to the next Servlet for adding into two table.
My header portion data are added into one table which added only one row in table. while footer section data are added into the no of rows in another table dependent on No. of
Rows added into jsp page.
Here is an code for that logic.
<html>
ArrayList<String> mucode = new ArrayList<String>();
                            ArrayList<Integer> serials = new ArrayList<Integer>();
                            ArrayList<Integer> apxrate = new ArrayList<Integer>();
                            ArrayList<Integer> srname = new ArrayList<Integer>();
                            ArrayList<String> itcode = new ArrayList<String>();
                            ArrayList<String> itname = new ArrayList<String>();
                            ArrayList<Integer> iqnty = new ArrayList<Integer>();
                            ArrayList<String> iuom = new ArrayList<String>();
                            ArrayList<Integer> pqnty = new ArrayList<Integer>();
                            ArrayList<String> puom1 = new ArrayList<String>();
                           ArrayList<Integer> arate = new ArrayList<Integer>();
                            ArrayList<String> rdate = new ArrayList<String>();
                            ArrayList<String> bcs = new ArrayList<String>();
                            ArrayList<String> ccs = new ArrayList<String>();
                            ArrayList<String> remarkss = new ArrayList<String>();
                            //ArrayList<Integer> qtyrecs = new ArrayList<Integer>();
                            //ArrayList<String> dors = new ArrayList<String>();
                            //ArrayList<String> remarks = new ArrayList<String>();
                 String entryn = request.getParameter("entryno");
                    String rows = request.getParameter("rows");
                    out.println(rows);
                    //String Entryno = request.getParameter("entryno");
                   // out.println(Entryno);
                  int entryno = 0,reqqty = 0,srno = 0,deprequest = 0,rowcount = 0;
                            if(!Entryno.equals("")){
                                    entryno = Integer.valueOf(Entryno);
                            if(!rows.equals("")){
                                    rowcount = Integer.valueOf(rows);
                           for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("srno"+i)!=null){
                                            serials.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
                                            out.println(serials.size());
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("srno"+i)!=null){
                                            srname.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
                            out.println(srname.get(0));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("itmcd"+i)!=null){
                                            itcode.add(request.getParameter("itmcd"+i).trim());
                                    } //out.println(itcode.get(i));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("itmnm"+i)!=null){
                                            itname.add(request.getParameter("itmnm"+i).trim());
                                    }//out.println(itname.get(i));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("indentqty"+i)!=null){
                                            iqnty.add(Integer.valueOf(request.getParameter("indentqty"+i).trim()));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("uom"+i)!=null){
                                            iuom.add(request.getParameter("uom"+i).trim());
                                    }//out.println(iuom.get(i));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("mcode"+i)!=null){
                                            mucode.add(request.getParameter("mcode"+i).trim());
                           for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("packqty"+i).equals("")){
                                      pqnty.add(0);
                                    }else
                                        pqnty.add(Integer.valueOf(request.getParameter("packqty"+i).trim()));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("pack"+i)!=null){
                                            puom1.add(request.getParameter("pack"+i).trim());
                                   }else
                                    puom1.add("");
                           for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("rate"+i).equals("")){
                                        arate.add(0);
                                    }else
                                    arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
                 /* for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("rate"+i)!=null){
                                            arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
                          for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("dor"+i)!=null){
                                            try{
                                                    rdate.add(dashdate.format(slashdate.parse(request.getParameter("dor"+i).trim())));
                                            }catch(ParseException p){p.printStackTrace();}
                                    }else
                                       { rdate.add("");}
                               for(int i=1;i<=rowcount;i++){
                             if(request.getParameter("bcc"+i)!=null){
                                            bcs.add(request.getParameter("bcc"+i).trim());
                                    }out.println(bcs.get(0));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("ccc"+i)!=null){
                                            ccs.add(request.getParameter("ccc"+i).trim());
                                    }out.println(ccs.get(0));
                            for(int i=1;i<=rowcount;i++){
                                out.println("remark2");
                                    if(request.getParameter("remark2"+i)!=null){
                                            remarkss.add(request.getParameter("remark2"+i).trim());
                                    }out.println(remarkss.get(0));
                    ArrayList<String> Idate = new ArrayList<String>();
                    for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("dateindent"+i)!=null){
                                            try{
                                                    Idate.add(dashdate.format(dashdate.parse(request.getParameter("dateindent"+i).trim())));
                                            }catch(ParseException p){p.printStackTrace();}
                String Rdate = dashdate.format(new java.util.Date());
                 String tdate = dashdate.format(new java.util.Date());
                 // String Indentdate = dashdate.format(new java.util.Date());
               // String ApprovedT1 = dashdate.format(new java.util.Date());
               // String ApprovedT2 = dashdate.format(new java.util.Date());
                   // String ApprovedT1=" ";
                    //String ApprovedT2="";*/
                String ApprovedT1= dashdate.format(new java.util.Date());
               out.println (ApprovedT1);
                  String ApprovedT2=dashdate.format(new java.util.Date());
                   out.println(ApprovedT2);
                String Indentdate=(dashdate.format(slashdate.parse(request.getParameter("dateindent").trim())));
                   out.println(Indentdate);
                    String Cocode ="BML001";
                    out.println(Cocode);
                    String Deptcode = request.getParameter("dept1");
                    out.println(Deptcode);
                    String Empcode = request.getParameter("emp");
                    out.println(Empcode);
                    String Refno =request.getParameter("rtype");
                     out.println(Refno);
                    String Divcode = request.getParameter("todiv1");
                    out.println(Divcode);
                    String Usercode = "CIRIUS";
                     String Whcode = request.getParameter("stor");
                    out.println(Whcode);
                    // String Itemgroupcode = request.getParameter("");
                     String Itemgroupcode ="120000";
                     out.println(Itemgroupcode);
                    String Supplytypecode = request.getParameter("stype");
                    out.println(Supplytypecode);
                    String Delcode = request.getParameter("deliverycode");
                    out.println(Delcode);
                    String Itemclass="WS";
                    out.println(Itemclass);
                    // String Itemclass = request.getParameter("iclass");
                   // out.println(Itemclass);
                    String unitcode = request.getParameter("uni");
                    out.println(unitcode);
                     String Todivcode = request.getParameter("todiv1");
                    out.println(Todivcode);
                    String Appxrate = request.getParameter("rate");
                    out.println(Appxrate);
                    String Srno = request.getParameter("srno");
                    out.println(Srno);
                /*    String Indqty = request.getParameter("indentqty");
                  out.println(Indqty);*/
              String Itemcode = request.getParameter("itmcd");
                   out.println(Itemcode);
                   String Othersp = request.getParameter("remark1");
                    out.println(Othersp);
                    String Reqdt = request.getParameter("dor");
                    out.println(Reqdt);
                    String Munitcode = request.getParameter("mcode");
                    out.println(Munitcode);
                    String Packqty = request.getParameter("packqty");
                    out.println(Packqty);
                    String Packuom = request.getParameter("pack");
                    out.println(Packuom);
                    String Remark2 = request.getParameter("remark2");
                    out.println(Remark2);
                    String BC = request.getParameter("bcc");
                    out.println(BC);
                    String CC = request.getParameter("ccc");
                    out.println(CC);
                    try{
                        st=connection.createStatement();
                        connection.setAutoCommit(false);
                        String sql="INSERT INTO PTXNINDHDR(COCODE,DEPTCODE,EMPCODE,APPROVEDT1,APPROVEDT2,INDDT,ENTRYNO,REFNO,REMARKS,DIVCODE,USERCODE,WHCODE,ITEMGROUPCODE,SUPTYPECODE,DELCODE,UNITCODE,TODIVCODE,ITEMCLASS)VALUES('"+Cocode+"','"+Deptcode+"','"+Empcode+"','"+ApprovedT1+"','"+ApprovedT2+"','"+Indentdate+"',"+Entryno+",'"+Refno+"','"+Othersp+"','"+Divcode+"','"+Usercode+"','"+Whcode+"','"+Itemgroupcode+"','"+Supplytypecode+"','"+Delcode+"','"+unitcode+"','"+Todivcode+"','"+Itemclass+"')";
                        out.println(sql);
                        st.addBatch(sql);
                        for(int i=0;i<serials.size();i++){
                            out.println("Inside the Statement");
                            String query3="test query for u";
                            out.println(query3);
                           String queryx="Insert into PTXNINDDTL(APXRATE,ENTRYNO,BRKNO,INDQTY,ITEMCODE,OTHERSPFCS,MUNITCODE,PACKQTY,PACKUOM,REMARKS,DIMSUBGRPCODE,DIMCODE,REQDT)VALUES("+arate.get(i)+","+entryno+","+srname.get(i)+","+iqnty.get(i)+","+itcode.get(i)+",'"+Othersp+"','"+mucode.get(i)+"',"+pqnty.get(i)+",'"+puom1.get(i)+"','"+remarkss.get(i)+"','"+bcs.get(i)+"','"+ccs.get(i)+"','"+rdate.get(i)+"')";
                           out.println(queryx);
                            st.addBatch(queryx);
                       int[] result=st.executeBatch();
                       connection.commit();
                       for(int k=0;k<result.length;k++)
                       out.println("rows updated by "+(k+1)+"insert sta:"+result[k]+"");
                    catch(BatchUpdateException bue)
                    out.println("error1;"+bue+"");
                    catch(SQLException sql)
                    out.println("error2;"+sql+"");
                    catch(Exception l)
                    out.println("error3;"+l+"");
</html>
   Now I looking for to retrieve this footer section data available in multiple rows from footer table and present it in jsp page .
I am finding difficulties in how to show this multiple row data for dynamic no of rows .i.e. variable no. of rows.
I have able to show the data in Header portions of page in this ways
here i am adding the part of code which shows the data from header part of table i.e from Header table
<html>
<h2 align="center"><b>Indent Preparation</b></h2>
    <div align="left">
        <table width="849" border="0" cellspacing="3" cellpadding="3" align="center">
            <tr>
                <td ><div align="left"><b>Indent No.</b></div></td>
                <td ><label>
                        <input name="indentno" type="text" id="indentno" size="15" value="" /><input type="hidden" name="no" id="no">
                </label></td>
                <td ><div align="center"><strong>Indent Date</strong></div></td>
                <td ><label>
                        <div align="center">
                            <input name="dateindent" type="text" id="dateindent"value="<%=date1%>"/><input type="hidden" name="no" id="no">
                        </div>
                </label></td>
                <td> </td>
                <td><div align="right"><strong>Entry No.</strong></div></td>
                 <%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
        <td><input type="text" value="<%=hdrcode.get(3)%>" size="10"></td>
<%}else{%>
               <td><input type="text" name="entryno" id="entryno" value="<%=entryNo%>"/></td>
                         <%}%>
                        <div align="right"></div>
            </tr>
            <tr>
                <td><b>Division</b></td>
                <%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(9)%>" size="20"</td>
<td><input type="hidden" name="div1" id="div1" value='<%=hdrcode.get(10)%>'></td>
<%}else{%>
               <td><input type="text" name="div" id="div" /></td>
               <td><input type="hidden" name="div1" id="div1" /> </td>
          <%}%>
                <td> </td>
                <td> </td>
                <td><div align="right"><strong>Unit</strong></div></td>
               <%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(14)%>" size="20"</td>
<td><input type="hidden" name="uni" id="uni" value='<%=hdrcode.get(12)%>'></td>
<%}else{%>
               <td><input type="text" name="unit" id="unit" /></td>
               <td><input type="hidden" name="uni" id="uni" /> </td>
          <%}%>
            </tr>
            <tr>
</html>
Any suggestion on any above works is highly appreciated.
Thanks and regards
harshal

Too much code. It's also not well intented nor formatted. I don't see a question either or it got lost in that heap of unformatted code.
I will only answer the question in the thread's subject:
How to retrieve multiple data from table and represent it in jsp pageTo retrieve, make use of HttpServletRequest#getParameterValues() and/or #getParameter().
To display, make use of JSTL's c:forEach.

How do I use an XML Data Feed or a CSV Data Feed?

I am trying to build a website for a business I started. My drop shipper has a "data feed" that has all of the info for the products (over 100k products). The data feed is available in bot XML and CSV format. I have searched what seems like forever, and cannot find any info on how to actually make it work. Can anyone point me in the direction of how to actually do this? I have both dreamweaver and muse.do everything?
Do I need to create different pages and things like that? Or does the data feed
Also, The data feed is updated every 12 minutes after the hour, every 8 hours from the dropshipper, so will inputting the data feed automatically change on the website, or will I need to re add the data feed code every day?
This is what the dropshippers website says ...
Files on this page can be used to populate drop ship websites. We recommend that you update the inventory on your site as often as possible, both to make sure you have all the items we carry, and to avoid placing orders with us for items that are out of stock or discontinued.
The Bronze feeds, (i.e., ELD-B01.csv, MC-B01.csv, ELD-B01.xml, and MC-B01.xml) start the update process 12 minutes after the hour, every 8 hours at 08:12, 16:12, 00:12 CST. Be advised it takes awhile to complete the update process because of the many different feeds and the amount of data.. The OutofStock.csv, Discontinued.csv and InStock.csv feeds are updated every 15 minutes.
Thanks in advance!

You would need to parse the XML feed into your site with PHP or JavaScript.
http://www.w3schools.com/php/php_xml_simplexml.asp
Nancy O.

Custom components that accept multiple data types

The components that come with Flex, such as Datagrid, can
accept
multiple data types as a data source. For instance, you can
bind a
Datagrid to XML return from an HTTPService request or you can
build an
array and bind to that. I'd like to build my own component
that does
something similar, but I can't find any examples of this. I
don't
really even know what terms I'd search under to find it.
Can anyone out there give me any idea of how this is done?
Also, I'm a
bit hazy on how the column definitions you set up in the MXML
tag get
received inside the class. I'd appreciate any insight on how
this
works.
Thanks;
Amy

"Amy Blankenship *AdobeCommunityExpert*"
<[email protected]>
wrote in message news:[email protected]...
>
> "rvollmar" <[email protected]> wrote in
message
> news:[email protected]...
>> For the second part of your post, are you asking how
to set up columns in
>> ActionScript? e.g.
>>
>> private function setColumnConfig1(dg:DataGrid):void{
>> colArray = new Array();
>> var col1:DataGridColumn = new DataGridColumn();
>> var col2:DataGridColumn = new DataGridColumn();
>> var col3:DataGridColumn = new DataGridColumn();
>> var col4:DataGridColumn = new DataGridColumn();
>> var col5:DataGridColumn = new DataGridColumn();
>> var col6:DataGridColumn = new DataGridColumn();
>>
>> col1.dataField = "recordName";
>> col2.dataField = "image";
>> col3.dataField = "recordAmount";
>> col4.dataField = "who";
>> col5.dataField = "where";
>> col6.dataField = "when";
>>
>> col2.itemRenderer = application.ImageRenderer;
>>
>> colArray.push(col1);
>> colArray.push(col2);
>> colArray.push(col3);
>> colArray.push(col4);
>> colArray.push(col5);
>> colArray.push(col6);
>>
>> dg.columns = colArray;
>> }
>>
>> Or were you wondering, when one writes this in mxml:
>>
>> <mx:columns>
>> <mx:DataGridColumn ...>
>> ...
>> </mx:columns>
>>
>> how do you then have the control use that
information?
>
> The latter. But the fact is that I was misreading the
example I was
> looking at.
>
> <?xml version="1.0"?>
> 
> <mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml">
> <mx:DataGrid>
> <mx:ArrayCollection>
> <mx:Object Artist="Pavement"
> Album="Slanted and Enchanted" Price="11.99" />
> <mx:Object Artist="Pavement"
> Album="Brighten the Corners" Price="11.99" />
> </mx:ArrayCollection>
> </mx:DataGrid>
> </mx:Application>
> I was thinking the ArrayCollection was going to the
columns, but of course
> it is the dataProvider. Am I right in thinking that
internally the
> control has a defaultProperty metatag that enables the
contents of the
> parent DataGrid tag to just come in and populate the
dataProvider through
> PFM?Thanks;Amy
OK, I have looked at the source file, and it looks like the
[DefaultProperty] metatdata tag is at least not used in the
ListBase.as
class. So I am guessing it is either higher or lower in the
heirarchy...?
-Amy

How to tune performance of a cube with multiple date dimension?

Hi,
I have a cube where I have a measure. Now for a turn time report I am taking the date difference of two dates and taking the average, max and min of the date difference. The graph is taking long time to load. I am using Telerik report controls.
Is there any way to tune up the cube performance with multiple date dimension to it? What are the key rules and beset practices for a cube to perform well?
Thanks,
Amit

Hi amit2015,
According to your description, you want to improve the performance of a SSAS cube with multiple date dimension. Right?
In Analysis Services, there are many tips to improve the performance of a cube. In this scenario, I suggest you only keep one dimension, and only include the column which are required for your calculation. Please refer to "dimension design" in
the link below:
http://www.mssqltips.com/sqlservertip/2567/ssas--best-practices-and-performance-optimization--part-3-of-4/
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

SSDT - Using a SharePoint list data feed as source - "column does not exist in the rowset" error

Hey guys!
So, I want to use a SharePoint list data to create a cube/tabular model, in order to make a complex analysis in PPS using MDX.
To create the tabular model, I'm using the SS Data Tools, and importing a feed from the respective SharePoint list (using the _vti_bin/listdata.svcextension and then selecting the list(s) I wanna to import).
Everything looks fine and smooth, I can select and preview the data in the table import wizard, but in the end, when importing, I always get this error IF the table has one or more row of data (if the table is empty, it's ok...) - the <...>
column doesn't exist in the rowset.
(Curiously, when I have the same procedure in PowerPivot for Excel, I have no problems, everything works fine. The problem is that then I get again errors if I try to create a tabular model on SSDT importing a PowerPivot file).
Here's the error:
Had you already tried this in SSDT? Are you experiencing the same trouble?
Best regards, and thanks in advance!
Jorge Mateus
Jorge Mateus

I noticed something else too.
I can't process Tabular Models on both SSDT and SSMS (2012), but I can process Tabular Models created on PowerPivot.
I tried to create a Data Feed connection on PowerPivot, and it was successfully created. However, if restoring the PowerPivot Tabular DB on my SSAS Tabular instance and processing (full) the model through SSMS, it won't work.
Is there anything different on PowerPivot and SSDT related with Partitioning or connections to the data sources?
Regards,
Jorge
Jorge Mateus
Update:
When trying to Restore a PowerPivot file on my SSAS Tabular Server and full process the model:
The operation failed because the source does not contain the requested column. You can fix this problem by updating the column mappings.
More Details:
The 'X' column does not exist in the rowset.
An error occurred while processing the partition 'X_81dabac5-c250-4a8c-8832-ad7fcedd35cb' in table 'X_81dabac5-c250-4a8c-8832-ad7fcedd35cb'.
The current operation was cancelled because another operation in the transaction failed.
X is the first column of the source table, no matter if I chose others on the PowerPivot table.
When trying to import data from a data feed using SSDT:
The 'X' column does not exist in the rowset.
An error occurred while processing the partition 'X_ee6be81f-2235-4113-b404-cfcb20647a38' in table 'X_ee6be81f-2235-4113-b404-cfcb20647a38'.
The current operation was cancelled because another operation in the transaction failed.
X is the first chosen column to import.

How to load data into Planning/Essbase from multiple data column

Dear All,
I have a interface file which contains multiple data column as follows.
Year,Department,Account,Jan,Feb,Mar,Apr,May,Jun,Jul,Aug,Sep,Oct,Nov,Dec
FY10,Department1,Account1,1,2,3,4,5,6,7,8,9,10,11,12
FY10,Department2,Account1,1,2,3,4,5,6,7,8,9,10,11,12
FY10,Department3,Account1,1,2,3,4,5,6,7,8,9,10,11,12
I created a data rule to load these interface file.
I want to use ODI to upload this interface. I try to specify the rule name in ODI and run the interface.
But, it came out following errors.
2010-02-22 11:40:25,609 DEBUG [DwgCmdExecutionThread]: Error occured in sending record chunk...Cannot end dataload. Analytic Server Error(1003014): Unknown Member [FY09,032003,910201,99,0,0,0,0,0,0,0,0,0,0,0,0] in Data Load, [1] Records Completed
Any idea to fix the column, I sure the member name is correct as I can load data from data load rule correctly.
Thanks

Dear John,
I updated the data load rule delimter to "," and found different error message as follows.
'A910201.99','HSP_InputValue','HKDepart','No_WT','032003','NO_Lease','FY09','Actual','Final','Local','0','0','0','0','0','0','0','0','0','0','0','0','Cannot end dataload. Analytic Server Error(1003014): Unknown Member [0] in Data Load, [1] Records Completed'
It seems that the data load rule can recognize the some member except the figures of Jan to Dec..
thanks for your help

Multiple data feeds

Similar Messages

Maybe you are looking for