Multiple data feeds to Informatica from SAP BI

Guru's,
I have the need to push multiple data streams out of our SAP BI system into Informatica. I can move a single Open Hub Destination in a process chain, but have the need to run multiple OHD's in the same process chain.
I have tried doing this with a single ABAP 'Send Status' program, and with multiple ABAP 'Send Status' programs without success. I have also tried executing the steps in parallel or in series, also without success.
Any information/help would be appreciated.

OK according to Informatica support, this feature is not available at this time.

Similar Messages

How to extract the data into Excel / PDF from SAP

Hi,
We have spool number of a report output.
We want to extract the data into Excel / PDF from SAP directly...
Plz guide...

Hi ,
Please check this [Thread|HOW TO DOWNLOAD SAP OUTPUT TO EXCEL FILE;. Hope your problem will be solved.
You can check [this also.|http://wiki.sdn.sap.com/wiki/display/sandbox/ToConvertSpoolDataintoPDFandExcelFormatandSenditinto+Mail]
Thanks,
Abhijit

Create a table and upload data in MS ACCESS from SAP ABAP programming?

Hi All,
How to create a table in MS ACCESS database and Upload SAP database table data into MS ACCESS table using ABAP programming?
Explain: My client requirement is " If he/she runs a ABAP Program, that will create a table and upload data into MS ACCESS Database table in background. "
Could you please give the solution or code? I know the program RIACCESS and I went through the SAP Note 583698.
Is this only solution for this? Or Any other possibilities?
Please give me solution.
Thanks in advance.

Hi,
It is not possible to create tables in a non SAP schema from inside SAP.
The SAP-Oracle license also does not allow you to create the table (see note 581312):
the following actions, among other things, are therefore forbidden at database level:
Creating database users
Creating database segments
Querying/changing/creating data in the database
Using ODBC or other SAP external access methods
Please refer following link,
[Ckick Here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
You can also do it by LSMW,
If you are using Access 97, you can download directly into an access
database from SAP. See program RIACCESS for details. You have to establish
an RFC destination PS_ACCESS_1 and 2.
There are then a couple of function modules. Go to SE37 and put in
msaccess and hit PF4.
The following is from the readme file: sapgui/ps/readme.sap
For the MS-Access interface SAP delivers 4 files:
WDPSASTR.EXE This is an RFC server program that is called by SAP R/3
(PS module). This program creates a MS Access database. The structure
information of the tables is transferred from R/3. In addition to
these tables a table named DDIC is created. This table contains the
structure information and should in no case be modified or deleted.
WDPSATAB.EXE This is an RFC server program that is called by SAP R/3
after WDPSASTR. This program filles the tables of the database with data.
There must not be made any changes of the structure of
the tables between the calls of WDPSASTR and WDPSATAB.
WDPSAZET.EXE This is an RFC client program that triggers work/time
confirmations in the PS module of SAP R/3 (like transaction CN27 Collectiv
confirm).
WDPSAMAT.EXE This is an RFC client program that triggers material
confirmations in the PS module of SAP R/3 (like transaction MB1A - Goods
Please also refer following links,
[Click here|Upload data from MS Access tables, to SAP tables.;
Before using the program "RIACCESS", you need to install the PS utilities, which are part of SAPGUI install CD.
It is available in the "SAPGUIPS directory".
Then do the followings :
1. Select transaction code SALE -> Systems in network-> Define RFC Destination.
2. You will need two RFC destinations (TCP/IP connections for the front-end workstation).
Setup the two RFC destinations PS_ACCESS_1 and PS_ACCESS_2 and you'll have to get them to point to
wdpsastr.exe and wdpsatab.exe respectively.
3. Then execute RIACCESS and choose PS_ACCESS_1 to generate access tables.
The system must also be able to access the RFC-DLL files (librfc2.dll, librfc3.dll, librfc4.dll, librfc5.dll, librfc6.dll, vrfc.dll).
Please note that Access only supports tables with up to 255 fields.

Data loading to Infocube from SAP R/3 System

Hello Friends,
I started load in BW four days back in background. Initially i could able to see the load running in SM50 t.code. This load has 28 data packets. Out of 28, five data packets are successfully updated data to the cube, Remaining data packets are not through yet and in yellow colour. Now there is no job running in background in SM50 and i didn't find any runtime error in ST22.Source system is SAP R/3.The data is related to Employee HR Position.
Could anyone plz throw some light on this.Thanks in advance. Your responose will be appreciated.
Regards,
Sreekanth

Hi,
for this u have to chk the luw entries in SM58 of R/3....
if there are some entries ur load won't be successful...
and also chk these all
1) wht in the details of extraction is ur data selction ended?
2) after that chk in sm58 there shuld be no entire there...
3) still ur load is in yellow, u can maually change the status to RED and goto each data packet and right click and select manual update...this takes soemtime to turn into green...
do the same for all packets in yellow and then after the whole packets r green u can change the status from red to back to technical status..
rgds,

Down Loading of data in Japanese Language from SAP R/3 30F to Flat file

Hi All,
We need to Extract the data (like MM ,SD, FI, CO Modulus for reporting purposes) which is in Japanese from the R/3 30F to Flat file and the Upload from flat file to BW 3.5
When we try to down load some sample records ,the Japanese Characters coming as boxes.
Can anyone Suggest how to Extract the Data in japanese Language into Flat file ,
and also are there any standard Extractors Available to extract all MM,FI, CO SD ..etc so that we can use them...
Please give some solution to above problem
Thanks&Regards
Ranga Rao

Hi,
I have no idea about this.
I have read some document after seeing your question.
may be helpful for you.
check the below link.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5411d290-0201-0010-b49b-a6145fb16d15">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5411d290-0201-0010-b49b-a6145fb16d15</a>
Regards,
Vijay

Exporting data to Excel 2007 from SAP report

Dear all,
Earlier we used to have Excel 2003 and while downloading data from MC.9 Report - Export - Transfer to XXL, we could able to download the data.
Now we have installed Excel 2007 and trying to download the data from MC.9 report, its opening excel, but no data is being copied,,, blank excel sheet,,,, further we could not able to download the data.
Is there any setting need to be done in SAP reporting or excel 2007 to download the data to Excel 2007.
thanks in advance.
urendra

Pl. go through the following step.
1. Execute MC.9
2. Select (click on) key figure column
3. Select Time series Button (CtrlShiftF4)
Now seperate window will come.
4. Select the button Save to PC file (shift+F8)
By this procedure you can download to excel
Regards
Amol

Master Data Load to APO from SAP MDM through SAP PI

Hi SDners,
This is a Parts Master Data Solution for one of the Largest Auto Manufacturer where SAP MDM will be the central hub of all the Global and Local attributes of Parts . The subscribing system is SAP SCM APO . Please advice if there is any possibility of direct integration between APO -MDM through PI. Does PI has the standard IDOC types to communicate with APO.
Also does APO has some RFC/BAPI to do master data load for Product Master /n/sapapo/mat1
Thanks,
Prabuddha

Hi,
Check the LUWs in SM58 in source system and then execute it. Else check in BD87 and push the IDocs manually in ECC.
Thanks
Reddy
Edited by: Surendra Reddy on Feb 24, 2009 10:59 AM

Multiple data feeds

In the discover product catalog application, while performing a baseline load, recordstore_data.xml gets updated to MDEX engine. If i need to add another data xml, say for e.g recordstore_data2.xml, is it possible?
- Bing

Are you using a relatively recent product catalog integration version? If so then it uses CAS as a data repository, and you need to modify the various parts to create the repository, load it with data, then finally read that new data source in, so something like:
1. create a new record store definition in ./config/cas/*_cfg.xml
2. modify ./control/initialize_rs_feeds.[bat|sh] to initialize the new record store
3. load the data via ./control/initialize_rs_feeds.[bat|sh]
4. add a new record adapter to pull this data in via CAS (and a record assembler component to join it together with the original source - if you just want to "merge" the two sets together, use a Switch join)
HTH
Michael

Extracting data FROM SAP BW/BI TO SAP R/3 Tables

Dear Experts,
I would like to know How to get the data from SAP BI/BW which we extracted earlier to SAP R/3 Tables.
in specific I want to get the data from BW/BI to R/3 Tables again.
for Ex: I have loaded data to ZFC_C25 Cube from SAP R/3 System. But now I want to load the data from ZFC_C25 Cube to my selected R/3 Tables.
Please give a clue if it is possible or not if YES How.
Thanks & Regards,
Sai.

Hi
Check this Retraction document
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
You can find more details regarding R/3 retractors :
https://websmp101.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700003587872003E
regards
Chandra SekharT

Data Transfer from SAP R/3 to CRM System

Hi Experts,
I need the Busniess Partner Data in CRM system from SAP R/3. Can i do this by ALE or is ther any other way to do it?..If i need to do it by ALE can anyone pls let me know what message type should i use and the steps that i have to follow.
Thanks & Regards
Sathish

Check the links
Integration between mySAP and CRM using XI
How to make integration with CRM system with XI
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
CRM XI Integration
Regards.

Export data from SAP Document Management System to File System(FileStore)

Hi,
We need to extract/ export data (documents and metadata) from SAP Document Management System to windows File System (File Store), can anyone suggest us tool or methodology to do the same.
Thanks,
Nilesh

I'm also looking for a solution for this problem. We are capturing comments in BW-BPS layouts. They get stored in BW's document management system and we would like to export them out of the system for external reporting into an ACCESS database.

Data migration from SAP to Oracle

Can any one suggest best possible method for migrating master and transactional data from SAP to Oracle.
Please suggest methods to get data in text file from SAP.

Best approach would be to use Electronic Data Interchange (EDI) outbound from SAP inbound to Oracle. There are two widely used standards in EDI messages - ANSI X12 and EDIFACT; I'm pretty sure the Oracle system will be able to accept one of the two standards or both.
In my last message, when I asked if Oracle is able to receive and process IDocs, I actually meant if Oracle will be able to accept and process EDI messages. IDocs are containers of the EDI message i.e. a data container - their formats are SAP proprietary formats which will not make sense to your target system (Oracle). EDI has been around for many years and is the standard way of electronically exchanging business documents between computer systems of business partners, using a standard format over a communication network.
In regards to your question - I'm not really sure if you want to send master/transactional data real-time from SAP to Oracle or want to transfer the historical data i.e. download from SAP tables (thru SE16 - this will download the field labels as well) into text files and then upload it to Oracle by using a custom program which reads/maps the files then posts the transactional data/updates master data tables in Oracle as required by that system. So let me know as much details as possible.
It would be nice to show appreciation by rewarding points.
Cheers,
Sougata.

Data Flow from SAP Source (ECC) system to SAP BI system

Hi All,
I wanted to know how data will be flown from SAP Source system to SAP BI system.Data flow should include
1) Data will be flown by using the IDOCs?
2) What all are the interfaces involved while data is transferring?
3) What will happen exactly, if you execute the PSA?.
If you have any info on this, could you please post here....I
Regards,
K.Krishna Chaitanya.

Hi Krishna,
Please go through this article :
"http://www.trinay.com/C6747810-561C-4ED6-B85C-8F32CF901602/FinalDownload/DownloadId-C2EB7035A229BFC0BB16C09174241DC8/C6747810-561C-4ED6-B85C-8F32CF901602/SAP%20BW%20Extraction.pdf".
Hope this answers all the mentioned questions.
Regards,
Sarika

Fetch data from SAP Standard Reports

Hi,
I want to fetch the data of internal Table from SAP-Standard Reports. After than I can use in different report of these data. So Please guide me how to do this. How to fetch the data for use in different programs at run time of new object.
Thanks !
Ram Shanker
Edited by: Ram Shanker on Feb 7, 2012 6:02 PM

YOU WANT LIKE THIS
SELECT VBELN FKART FKDAT KUNAG FROM VBRK CLIENT SPECIFIED INTO TABLE IT_VBRK
    WHERE MANDT = SY-MANDT AND FKDAT IN SO_YEAR
    AND FKART IN SO_TYPE
    AND BUKRS IN SO_BUKRS
    AND KUNAG IN SO_KUNAG.
*********Selection from Billing Document: Item Data ******
IF IT_VBRK[] IS NOT INITIAL.
    SELECT VBELN POSNR FKIMG AUBEL AUPOS MATNR INTO TABLE IT_VBRP
      FROM VBRP CLIENT SPECIFIED FOR ALL ENTRIES IN IT_VBRK
      WHERE MANDT = SY-MANDT AND VBELN = IT_VBRK-VBELN
      AND MATNR IN SO_MATNR.
********Selection from Material Descriptio*****
    IF IT_VBRP[] IS NOT INITIAL.
      SELECT MATNR MAKTX INTO TABLE IT_MAKT
        FROM MAKT CLIENT SPECIFIED FOR ALL ENTRIES IN IT_VBRP
        WHERE MANDT = SY-MANDT AND MATNR = IT_VBRP-MATNR.
    ELSE.
      MESSAGE TEXT-005 TYPE TEXT-001.
      STOP.
    ENDIF.
ELSE.
    MESSAGE TEXT-005 TYPE TEXT-001.
    STOP.
ENDIF.
IF IT_VBRP[] IS NOT INITIAL.
*********Selection from Sales Document: Business Data ******
    SELECT VBELN POSNR KDKG1 INTO TABLE IT_VBKD
      FROM VBKD CLIENT SPECIFIED FOR ALL ENTRIES IN IT_VBRP
      WHERE MANDT = SY-MANDT AND VBELN = IT_VBRP-AUBEL
      AND POSNR = IT_VBRP-POSNR
      AND KDKG1 IN SO_VTEXT.
    IF SY-SUBRC <> 0.
      IF SO_VTEXT IS NOT INITIAL.
        MESSAGE TEXT-028 TYPE TEXT-001.
        STOP.
      ENDIF.
    ENDIF.
ENDIF.
IF SO_VTEXT IS NOT INITIAL.
    SORT IT_VBKD BY VBELN POSNR.
    SORT IT_VBRP BY AUBEL POSNR.
    LOOP AT IT_VBKD INTO WA_VBKD.
***Selection to get warranty period
      SELECT SINGLE VTEXT FROM TVKGGT INTO WA_FINAL-VTEXT
      WHERE KDKGR = WA_VBKD-KDKG1
      AND SPRAS = 'EN'.
      READ TABLE IT_VBRP INTO WA_VBRP WITH KEY AUBEL = WA_VBKD-VBELN POSNR = WA_VBKD-POSNR.
      IF SY-SUBRC = 0.
        WA_FINAL-VBELN = WA_VBRP-VBELN.
        WA_FINAL-POSNR = WA_VBRP-POSNR.
        WA_FINAL-FKIMG = WA_VBRP-FKIMG.
        WA_FINAL-AUBEL = WA_VBRP-AUBEL.
        WA_FINAL-AUPOS = WA_VBRP-AUPOS.
        WA_FINAL-MATNR = WA_VBRP-MATNR.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
          EXPORTING
            INPUT = WA_FINAL-MATNR
          IMPORTING
            OUTPUT = WA_FINAL-MATNR.
      ENDIF.
      READ TABLE IT_VBRK INTO WA_VBRK WITH KEY VBELN = WA_VBRP-VBELN.
      IF SY-SUBRC = 0.
        WA_FINAL-FKART = WA_VBRK-FKART.
        WA_FINAL-FKDAT = WA_VBRK-FKDAT.
      ENDIF.
      READ TABLE IT_MAKT INTO WA_MAKT WITH KEY MATNR = WA_VBRP-MATNR.
      IF SY-SUBRC EQ 0.
        WA_FINAL-MAKTX = WA_MAKT-MAKTX.
      ENDIF.
***Selection to get sold to party
      SELECT SINGLE NAME1 FROM KNA1 INTO WA_FINAL-NAME1
      WHERE KUNNR = WA_VBRK-KUNAG.
      APPEND WA_FINAL TO IT_FINAL.
    ENDLOOP.

Conversion failed when converting date and/or time from character string

Hi experts,
I'm trying running a query in Microsoft Query but it gives the following error message:
"conversion failed when converting date and/or time from character string"
when asks me the data I'm inserting 31-01-2014
i've copy the query form the forum:
SELECT T1.CardCode, T1.CardName, T1.CreditLine, T0.RefDate, T0.Ref1 'Document Number',
     CASE WHEN T0.TransType=13 THEN 'Invoice'
          WHEN T0.TransType=14 THEN 'Credit Note'
          WHEN T0.TransType=30 THEN 'Journal'
          WHEN T0.TransType=24 THEN 'Receipt'
          END AS 'Document Type',
     T0.DueDate, (T0.Debit- T0.Credit) 'Balance'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')<=-1),0) 'Future'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>=0 and DateDiff(day, T0.DueDate,'[%1]')<=30),0) 'Current'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>30 and DateDiff(day, T0.DueDate,'[%1]')<=60),0) '31-60 Days'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>60 and DateDiff(day, T0.DueDate,'[%1]')<=90),0) '61-90 Days'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>90 and DateDiff(day, T0.DueDate,'[%1]')<=120),0) '91-120 Days'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>=121),0) '121+ Days'
FROM JDT1 T0 INNER JOIN OCRD T1 ON T0.ShortName = T1.CardCode
WHERE (T0.MthDate IS NULL OR T0.MthDate > ?) AND T0.RefDate <= ? AND T1.CardType = 'C'
ORDER BY T1.CardCode, T0.DueDate, T0.Ref1

Hi,
The above error appears due to date format is differnt from SAP query generator and SQL server.
So you need convert all date in above query to SQL server required format.
Try to convert..let me know if not possible.
Thanks & Regards,
Nagarajan

Multiple data feeds to Informatica from SAP BI

Similar Messages

Maybe you are looking for