Multiple Data in selection tab of infopackage
Hello,
I need to select in a InfoPackage from a InfoObject multiple values, which means
I need to implement a logical OR in the selection of an InoObject in a InfoPackage.
How to set up L_T_RANGE ?
Thank You !
Martin Sautter
For dynamis selects this is also helpfull:
Re: ABAP Selection in infopackage
THank You
Martin
Similar Messages
-
Data Selection tab in infopackage
Hi Gurus
Its a very basic question but can anybody tell me what function the "data selection " Tab does in infopackage?
I know the setting required on R3 side for that but not sure why we use the data selection.
Can we use this data selection for master data as well?Hi Kris,
Data Selection tab allows you to select: date ranges, document numbers and the like.
In order to have filds in there, you should first select in the DataSource in the R/3 side wich field could be selected.
If it is a Generic DataSource, you can do it running RSO2 transaction code.
<text removed by moderator>
Claudio
Message was edited by: Matthew Billingham -
How To Add InfoObject in the Data Selection Tab of InfoPackages in 2004s
Hi Y'all!
I would like to ask how to add an infoobject in the Data Selection Tab of the InfoPackage in 2004s. It says its optional, this definintion of selection criteria for the infopackage.
My apologies, I don't understand how this is done. Surely, I would like, however, to understand how to add an infoobject in this data selection Tab of the InfoPackage in 2004s.
Can any kind soul out there (gurus) please lend me your thoughts?
Regards,
PhilipsHello Rajani!
Thank you very mcuh for that! I super appreciate it! Can you prescribe how I can do this step by step please? Where exactly in the DS can I locate this "field for selection" option in the DataSource?
Regards!
Philips -
Use ABAP Routine in Selection Tab of Infopackage
I am trying to use the ABAP routine in the InfoPackage SELECTION Tab to "EXCLUDE" a value. For example, I want to load all the Material types, except ZUN1. But, when I write in the ABAP, l_t_range-sign = 'E' instead of 'I' or l_t_range-option = 'NE' instead of 'E', I get an error saying these values are not permitted.
Is there any way to exclude any value from Selection in the InfoPackage?
Regards,
Milind VadHi dear and welcome on board!
You have two options:
include everything you want in your IP
load everything and exclude what you don't want in the start routine in transfer rules
No other ways...
Hope it helps!
Bye,
Roberto
...and please don't forget to reward the answers...it's THE way to say thanks here ! -
Data selection tab of infopackage
hi all,
how do we select data from infopackage if you do not want a certain value?
I wrote ABAP code to select not as:
L_t_RANGE-SIGN = 'I'.
L_t_RANGE-option = 'NE'.
L_t_RANGE-low = 'Y'.
But I got errors. Sign 'I' with 'NE' is not allowed. Please advise.
LindaLinda,
<b>Exclude Option won't work in the Infopackage data selection routine.</b>
You can use SIGN equals to I only and option values EQ, CP and BT.
Try append all the required values. use BT as well as eq.
If you want to permenantly exclude those to BW. you have 3 good options along with Infopackge Selection.
1. <b>User Exit in the Source System.</b>
2. Start Routine in the Transfer Structure.
3. Start Routine in the Update Rules.
all the best.
Regards,
Nagesh Ganisetti.
*assign points if it helps. -
Enable 3rd party selection tab in infopackage
HI,
When i create my infopacakage for 3rd party datasource, my 3rd party selction tab is not enabled to give any inputs. Could anyone pls guide me how to get it enabled.
AnamikaHi,
I created the infopackage on Third Party i.e. ETL source System . In that Infopackage there is tab name as "3rd Party Selections". In that tab I have to give selection for the ETL workflow which will process the data from ETL to BW. And that tab is in the disable/ display mode. So question is how to make it enable or in the active mode to provide 3rd party selection condition?
Thanks,
Anamika -
How to select multiple data without select options?
Dear experts,
I have a rquirement that i have a one selection screen and in that selection screen on date field is there which is parameter type. we using this parameter date field in the program for selecting data..after that i am using the logic to multiple value..now my requirement is how to select the data for multiple value..
PARAMETERS : SO_DATE TYPE SY-DATUM OBLIGATORY.
CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
EXPORTING
DATE = so_date
DAYS = 1
MONTHS = 0
SIGNUM = '-'
YEARS = 0
IMPORTING
CALC_DATE = so_date
l_cm_first+0(6) = so_date+0(6). " month & year
l_cm_first+6(2) = '01'. " date
l_cm_end = so_date.
my requirement is that how to use l_cm_first and l_cm_end multiple selection in select query ??
eg- i want to fetch the data from 1/8/2014 to 11/08/2014 using this field l_cm_first and l_cm_endl_cm_first+0(6) = so_date+0(6). " month & year
l_cm_first+6(2) = '01'. " date
l_cm_end = so_date.
after executing this line l_cm_first = 1/8/2014 and l_cm_end = 11/08/2014
now i have to select in this range how to do it? -
Hierarchy selection tab missing in infopackage
Hi Experts,
i am looking how to load multiple hierarchies to Bi so inorder to know available hierarchies from OLTP in hierarchy selection tab in infopackage which was not available at all. i had only data selection tab.i am using version Bi 7.0
how can i found hierarchy selection tab in infopackage
Regards,
narasimha.Hierarchy loading is the same for info object which is created under the info object itself.
loading is uploading the data to the hierarchy, creating hierarchy is you will be maintaing the structure of the hierarchy under that info object
Are you sure you have Hierarchy maintained for your info object?
If the hierarchies are maintained you will find the Bell type symbol under the info objects in info providers tab.
As told by mti - drill down till you find the data source --right click on it and select create info package - here you can find the tab hierarchy selection tab (which is the second tab in that screen).
Check the below link to know more abt hierarchies
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm -
hi
in 3.5 if i select check box at transfer rules , i can see all objects at data selection tab at infopackage, in 7.0 if i want see objects at data selection tab, what is option.HI Suneel
In dtp IN extraction tab we have something called Filter, if u select the object here then it will be available in data selection tab...
Assign points if it helps
Khaja -
Hi Friends,
I see Selection TAB in the manage TAB of ODS and Cube, what is the difference of this TAB in cube and ODS??
Is this selection criteria we give in the Data Selection TAB of Infopackage for that particular data target??
Thanks in advance,This is to be used when you have to selectively delete data from the ODS. For example lets say you've realized that the data is being loaded incorrectly into the ODS from some time (past 3 months). But not all the data is incorrect but only for a few customer numbers (as an example). In this case, you use this selective deletion and give the customer numbers which have incorrect data and delete these records. After deletion and fixing the root cause, you can reload to the ODS using the same selections in the infopackage (mark the request as full repair if you have deltas going into the ODS at the same time). Hope this helps.
-
How to debug a ABAP Routine which is in Infopackage Data selection Tab
Hi ,
Please let me know How to debug a ABAP Routine which is in Infopackage Data selection Tab.Hi,
You can try to create infinite loop:
DATA: STOP.
WHILE STOP IS INITIAL. ENDWHILE.
Start InfoPackage and then go to SM50 and swich on debugging for your process. Then in debugger you can change value of STOP variable to skip the loop.
Krzys -
Can't find 0FYTLFP OLAP Variable in InfoPackage Data Selection tab on 3.5
On BW 3.5, when generating an InfoPackage with the datasource as Purchasing Data(80PUR_C01), under Data Selection tab, for the InfoObject 0FISCPER, I selected 7 (OLAP variables)for the Type column, then click the button next to it and under the column of Details for Type to bring up a window, but when expending the OLAP Variable field list, can't find the following value in the list which shows up on BW 3.1:
0FYTLFP 0FISCPER Cumulated to Last Fiscal Year/Period (SAP Exit)
How to make the above value show up in the OLAP Variable list? I thought maybe the variable 0FYTLFP needs to be installed in Business Contents, but there is no variable object type in Business Content. It sounds like a SAP Exit, but how to make the SAP Exit value show up on BW 3.5?
Thanks for everyone's input!hey Rohit,
Besides the three variable values in the list on BW 3.5, now I find a new one in the list, called "0E_ROLE 0SR_ROLE Role (SAP Exit)", I have no idea why this one shows up now. Now all the four variables in the list are:
1. 0CML12LM 0CALMONTH Last 12 Months Excluding the Current Month
2. 0CMONTH 0CALMONTH Current Calendar Month
3. 0E_ROLE 0SR_ROLE Role (SAP Exit)
4. 0S_RQMRC 0REQUID Most Current Data
0FYTLFP is still not in the list! We can't try to create BEx query since our BW 3.5 system is just installed and we have not got to the step to ceate a query. I try the 2nd way you suggested by pressing F6 on this variable with the typed in value 0FYTLFP, get the following msg "BEx variable 0FYTLFP could not be evaluated - No error message", that means it would not work on BEx query as well, right?
What could be the reason that we can't see 0FYTLFP variable in our new installed BW 3.5? Do you think our BASIS missed installing sth?
Thanks
Message was edited by: Kevin Smith -
How to debug an OLAP variant which is in Infopackage Data selection Tab
Hi experts,
How can I debug an OLAP variant used in the data selection tab for an infopackage? The loading is done via process chains. I am trying to debug the SAP delivered OLAP variant 0P_PPER3 of infoobject 0FISCPER3 (SAP exit). If I am not mistaken I believe the function module is RSVAREXIT_0P_PPER3. Thanks.Hi Mark !
This method is always good (if you have authorization to work in SM50):
put before your code an endless loop like this one:
data flag type c.
clear flag.
do.
if flag = ' '.
exit.
endif.
enddo.
then start your load...go to SM50 and here you will see your process looping on the same pgm...highlight the process and access into it in debug mode from the menu...
here you can change flag in 'X', exit from the loop and continue all the process in debug !!!
Hope it helps!
Bye,
Roberto
...and please don't forget to reward the answers...it's THE way to say thanks here ! -
Change the data selection tab page in an InfoPackage
Hi SDN Community,
Is it possible to have an Infopackage and change the data selection tab page ? Because I would like to know if I can change the select-options by a parameter.
For example: Now you can enter 01.01.1950 as the start date and 31.12.9999 as the end date,
I only want that the user enter the start date.
Thanks a lot,
best regards.
AnaYes, I tried an abap routine option and the result is not good because the user can't put the information in the low (start date) parameter.
Thanks -
Routine in Infopackage Data selection Tab
HI,
I am having one InfoObject (marital staus) in InfoPackage Data selection Tab.
Now I want to write a ABAP routine for that infoObject in Infopackage to select only those records of marital status = SINGLE.
I am new to ABAP . please let me know what code should I write in this routine.Hi Kris,
You would do it like this:
data: l_idx like sy-tabix.
read table l_t_range with key
fieldname = 'MARITAL_STATUS'.
l_idx = sy-tabix.
move: 'I' to l_t_range-sign,
'EQ' to l_t_range-option,
'SINGLE' to l_t_range-low.
modify l_t_range index l_idx.
Thanks,
Joseph
Maybe you are looking for
-
Getting an error in advanced search
Hi I am getting this error when I click following options - Add document folder - Add Administartor folder in advanced search. Error - The server has experienced an error. Try again, or contact your Portal administrator if you continue experiencing p
-
Foreign Trade Data Configuration (commodity code, legal categorization)
All, I have the following scenario/issue: 1. Orders (OR) created for Argentina country (goods coming from US to Argentina, not intercompany) are getting the commodity code printed on the invoice which the business doesn't want to happen. Researching
-
Hi, Have HP PSC 1410 All-in-One printer and am trying to print word documents but printout is blurry - like needing 3D glasses to read. Downloaded drivers but states that I already have latest version installed. Have printed a self-test report, pri
-
Some photos in iphoto library, but not in iphoto
iphoto 5, i have random photos in various folders that used to show up in iphoto, but after a plist issue and rebuild (which mostly went fine), these photos don't show up in the iphoto library or app. as an example, i have no photos showing up for se
-
I preordered Madden 15 Ultimate Edition in-store and when picking up the game something got screwed up. It was going fine until I handed the clerk the $10 off coupon, and I apparently gave it to her too late in the transaction even tho I hadn't paid