Multiple data sources to open hub destination ??

Hi,
        Is it possible to assign multiple data sources to open hub destination?
At present we are FTP'ing a file to users. Users need one more field added to this file. The information for this field belongs to another ODS. I  checked the infospoke but it does not accept multiple data sources.
Any ideas?
Thanks!
Edited by: BI Quest on Sep 4, 2008 8:12 PM

You can create multiple transformations for open hub destination. Create destination of open hub destination to be file on application server and then use transfer mechanism to transfer files to desired destination.
Regards,
Pravin Karkhanis.

Similar Messages

  • Data Extraction in Open Hub Destination using Process Chain

    Hi
    I want to extract data in Open Hub Destination (database table)from Data Store Object(ODS) through Process Chain.
    When i tried to create process chain, i found only one option under Process types - Data export into External System. Here it asks for Infospoke instead of Open Hub Destination.

    Michael is correct and below is the rationale...
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/58e1cdbed430d9e10000000a11466f/content.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/43/58e1cdbed430d9e10000000a11466f/content.htm</a>
    <b>Integration</b>
    You can use the data transfer process to update data to the open hub destination. The data is transformed in this process. Not all rules types are available in the transformation for an open hub destination: Formulas, reading master data, time conversion, currency translation and unit conversion are not available.
    Hope it Helps
    Chetan
    @CP..

  • Erase data from open hub destination data service

    Hi,
    I'm getting an error trying to delete data from a cube, for which data are extracted using open hub service and loaded into a table.
    The error given is the following:
    Request updated in 1794 already by 1795 target DTPR_4EEX9CGGXLTU2QIPWUAIEUDZK DTP request (ZRAPPEL)
    Message no. RSM077
    Diagnosis
    One or more DTP requests have already updated the request.
    Procedure
    Firstly, delete all update requests from your targets. Then you can delete the source request.
    Zrappel data is the open hub destination. But it is clear where requests for this destination, to let me delete the cube data.
    Thanks.

    Hi,
    Procedure
    Firstly, delete all update requests from your targets. Then you can delete the source request.
    Follow the same steps above , that means delete the requests from the Cube Zrappel.
    right click on the cube -
    > Delete Data
    now the syatem will promt you asking
    Do you want to delete the content of data target Zrapple ?
    say yes for it .
    hope this will solve your problem
    santosh

  • Difference bw open hub destination and info spoke ???

    Hi,
    what are difference b/w open hub destination and info spoke ???
    Thanks In advance.
    Regards
      Nitin

    Hi,
    The open hub destination is the object that allows you to distribute data from a BI system to non-SAP data marts, analytical applications, and other applications. It ensures controlled distribution across multiple systems.
    The open hub destination defines the target to which the data is transferred.
    An InfoSpoke can extract data in two ways:
    1.Full mode (F): the data corresponding to the selection criteria of the InfoSpoke is transferred from the data source into the respective destination.
    2.Delta mode (D): records that were added since the last extraction only are transferred in this mode. This is only possible for the source objects InfoCube and DataStore object.
    See the below Articles:
    InfoSpoke: Part -1
    www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/infospoke%20part%201.pdf
    Open Hub Destination: Part 1
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%201.pdf
    Open Hub Destination: Part 2
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%202.pdf
    Thanks
    Reddy

  • Open hub destination with datasource as the source

    Hi,
    I am trying to use the new features of BI for open hub destination where you can use datasource as the source for extraction.
    I have created an infopackage, loaded data to PSA and from there to open hub destination via the DTP.
    When I try to execute the DTP, I get the following error:
    <b>Datapackage processing terminated.
    Error in substep
    You are not authorized to use this transformation.</b>
    I have been able to use the DTP to load open hub destination targets with datastore and infocubes as source.
    Also when we turn on the security trace, it doesn't fail anywhere.
    Has anybody faced a similar problem?
    Any help appreciated,
    Thanks,
    Payal.

    I have created to OHD - one for a 3.5 data source and one for a 7.0 data source (both are different data sources). While creating DTP for the 7.0 data source, it did create a default mapping for transformation.
    But I still get same error in both cases.
    When I create the DTP, it tries to create a transformation. But I get an information message :
    Exception CX_RS_MSG occurred (program: CL_RSBK_PATH==================CP, include: CL_RSBK_PATH==================CM00I, line: 16).
    I can still activate the DTP and when I run it says I don't have authorization to this transformation.
    I think there are issues while creating the transformation, but I don't know what!
    -Payal.

  • Data selection in new Open Hub destination Vs Infospoke

    In BW 3.5, we can use T code RSBO to create Infospoke, In the selection tab, we can use any infoobject in the source infocube as the data filterfor the infoSpoke, e.g I can set company code as 1002 etc, while in the new  BI 7.0, Open Hub Destination,  where I can achieve the same by set the filter for a specific infoobject in the source cude?
    Edited by: Jianbai on Mar 29, 2010 11:49 PM
    Edited by: Jianbai on Mar 29, 2010 11:51 PM

    For Open Hub in BI7 we are creating transformation and DTP. The same resrtiction you can give in DTP (activate it after change).

  • What is source system and open hub destination?

    Hello,
             Kindly tell me In BI data modeling workbench ,in modeling there is are two areas name as "Source system" and "Open Hub destination".What is mean by this???How we use it in BI?

    Hi,
    Source system as the name suggests mentions the source of data. The place from where you are extractin data to BW.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/7a/27bcf087c7464db8b95eaa717b6e6a/content.htm
    OpenHub is for exporting data out of BW.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11e1b990-0201-0010-bf9a-bf9d0ca791b0
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3042c5fc-21a8-2910-c79e-ad530260ae2e
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01d3a090-0201-0010-9783-bc
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/bf/50453c01f4f75fe10000000a11402f/frameset.htm
    Thanks,
    JituK

  • Use of Open Hub Destination to load data into BPC

    Hi Gurus,
    I want to load the data from SAP BI to BPC (NW version), using Open Hub Destination. I want to know few things about this.
    1) What method should I use? Should I use Destination as Flat Files or Database tables? If Database tables, how can I use this data in the tables in BPC?
    2) If I go for Flat Files, which  is saved in the application server of BI, how can I import those files to BPC and use it using Data Manager?
    3) Also, in case of Flat Files, there are two files which are created. One is the control file and other one is the data file. How can I use both of them? Or can I just use data file without header?
    Your replies will be much appreciated.
    Thanks,
    Abhishek

    Hi Anjali,
    I can use the standard data manager package from BI to BPC, if the CSV file is available in the BPC Server or in case if I am directly extracting from BW object, InfoObject or InfoCube.
    But, since I will be using Open Hub, the output of this can be in a Database Table or a CSV file, preferably in SAP Application Server. In such cases, how can I use the Database table or CSV file in the standard Data Manager Package?
    Thanks for your reply.
    Abhishek

  • To view the data in open hub destination

    Hi all,
    Can anyone help me out how to check the data in open hub destination file.
    These are the details:
    Destination: File
    Type of file : Logical file
    Application Server file name : XXXXXXX
    If it was file name, i know it has to be checked in AL11 with directory name and file name.
    Here its a logical file name. Which is the directory corresponding to this?
    Thanks,
    tinkugeo

    Hi,
    Question: "Are all the logical files are saved in the home directory DIR_HOME?
                      Please correct me if I am wrong"
    Ans: When you create an Open hub destination using Physical file, the file will get created in DIR_HOME directory (by default) in AL11
    And for locating the physical path in AL11. Go through the below link. it gives ans to all your ques
    http://bx.businessweek.com/sap/view?url=http%3A%2F%2Fweblogs.sdn.sap.com%2Fpub%2Fwlg%2F17370
    Edited by: kumkum basu on May 20, 2010 8:20 AM

  • Program or Function module to delete data from Open Hub Destination Table

    Hi All,
    Can anybody suggest me a Program or Function module to delete data from Open Hub Destination Table.
    Thanks & Regards,
    Vinay Kumar

    You can simply goto t-code SE14 mention the open hub destination table and Delete data by clicking on "Activate and Adjust database" with radio button "Delete Data".
    Regards,
    Arminder

  • Open Hub Destination over a Datasource as a source

    Hi Expert,
                    I am trying to create Open hub destination over Datasource as a source
    it showing me an error "Cannot connect DataSource to an open hub destination".
    Can anyone tell me is it possible to create an open hub destination over a datasource
    If yes then how?
    Thanks and Regards
    Lalit Kumar

    HI lalit,
    Check the below forum for refer they have refer using datasource as source for OHD m nt sure:
    Open hub destination with datasource as the source
    OHD ISSUE
    Thanks,
    Deepak
    Edited by: Deepak Machal on Dec 15, 2011 11:04 AM

  • How to export data from ODS through Open hub destination ?

    Hello Expert,
    I ahve some data in ODS.I want to export that data to some thirdt party application through Open Hub destination .How will I do that ??
    Eary reply is appreciated .

    HD IS :
             1.DATASOURCE
             2.INFOSOURCE
             3.DATASTORE OBJECT
             4.INFOCUBE
             5.INFOOBJECT
    1.Assume that info cube existing  with data
    2.Create openhuB services
        GO FOR OHD---->select Any  info area ->CONTEXTMENU>Create OHD
         Give the 'OBJECT NAME'----Continue
    In OHD Destination type Depends upon 3 types
       1.DB-TABLE
       2.FILE
       3.THIRD PARTY TOOL
      3.Go for the Defination Tab give the File name
    4.Create Transfermations
    5.Create DTP
    OPEN HUB SERVICES WITH -
    INFOSOURCE:OHD---DB TABLE SPECIFY:/BIC/OH
    1.Assume that info cube existing  with data
    2.Create openhuB services
        GO FOR OHD---->select Any  info area ->CONTEXTMENU>Create OHD
        Give the 'OBJECT NAME'----Continue
    3.Select Dbfile----->Continue
       Select file location where you want to store file .
        O.Semantic key
    4.Create Transfermations
    5.Create DTP
    Regards ,
    Praveenyagnamurthy.

  • Open Hub Destination question

    Hi,
    We want to be able to extract data from a cube and would like to use Open Hub Destination for it. We also want to extract deltas.
    The question is ..
    Should we be making a single info package for this with delta capability ..
    or 2 separate info packages .. 1 for full mode and another for delta mode.
    Regards
    Vandana

    Hi,
    Yes what you said it is write
    from which cube do u want to retract the daat that cube will be the source
    first create the open hub in RSBO tcode and
    in open hub destination select aht and create the transformation between the table( to where u want to export)
    then create the DTP between the cube to the table
    and directly u can use the delta DTP first all the records will come and later onle delta records will be updated.
    Thansk & Regards,
    sathish

  • Open hub Destinations - Third-Party Tools As Destinations

    Dear all, below is the SAP Help process flow steps. I am quiet clear of all the steps except the APIs. Where do we define these APIs? When it says "You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction" where do I use it? Is it in the 3rd party tool? or is it in SAP BI.
    If it is in 3rd party tool, where in 3rd party tool. Do I need to write as code ? or would I have an option in the 3rd party tool?
    If someone can help me with Microsoft connector using Microsoft SQL Server 2008 Integration Services packages to SAP BI that would be helpful.
    Where in Microsoft SQL Server 2008 Integration Services packages can I use/put this APIs? Any help Plzz
    If it is in SAP BI where in SAP BI do I have to use these APIs? Any help is highly appreciated
    Regards,
    KK
    Process Flow:
    Extraction to the third-party tool can be executed as follows:
           1.      You define an open hub destination with Third-Party Tool as the destination type.
           2.      You create an RFC destination for your third-party tool and enter it in the definition of the open hub destination.
           3.      You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction.
           4.      You either start extraction immediately or include it in a process chain. You can also start this process chain from the third-party tool using process chain API RSPC_API_CHAIN_START. The extraction process then writes the data to a database table in the BI system.
           5.      When the extraction process is finished, the system sends a notification to the third-party tool using API RSB_API_OHS_3RDPARTY_NOTIFY.
           6.      The extracted data is read by API RSB_API_OHS_DEST_READ_DATA.
           7.      The status of the extraction is transferred to the monitor by API RSB_API_OHS_REQUEST_SETSTATUS.

    It's been a along time since i worked with open hub, but here goes:
    The Third Party tool needs parameters or switches to work correctly. Think of the old DOS commanda the  "/a" "/b" suffix.
    The APIs are simply a way to pass these parameters from the BW source to the Third Party target.
    If your tool does not need them, don't worry about them.
    John Hawk

  • Distributing multiple data sources by email

    I have a form that gets data from a database using Data Connections.
    I want to be able to email partially completed forms, using this data, to about 300 email addresses so that recipients receive only 1 form with only their personal data included.
    Is this possible without sending 300 separate partially completed emails?
    Thanks

    You can create multiple transformations for open hub destination. Create destination of open hub destination to be file on application server and then use transfer mechanism to transfer files to desired destination.
    Regards,
    Pravin Karkhanis.

Maybe you are looking for