Multiple DataSources of the same type (e.g. Peoplesoft Financials) in DAC

If I am definining multiple DataSources of the same type (e.g. Peoplesoft Financials) so as to extract data from multiple source ERP systems into a single DataWarehouse, should I have to define separate Data Source Numbers for each source database ?
I know the preseeded OBIA definitions provide different Data Source Number for Oracle Ebusiness Suite, Peoplesoft etc. But if I have the same ERP application and version in multiple source databases, how do I separate them ? Should I simply edit the Data Source Number and assign a new number to a new source ? Or do I have to copy some templates ?
Referring to Section 3.1.6 of the Oracle Business Intelligence Applications Configuration Guide (7.9.6.1).
Hemant K Chitale

Hemant,
The purpose of DATASOURCE_NUM_ID is to identify which source it's from.
In the Warehouse a combination of Integration_ID and DATASOURCE_NUM_ID defines the uniqueness.
In your case the Source System and Verison is the same so its not required to have different DATSOURCE_NUM_ID
but if for traceability you want to have one it then you can define it.
My advise would be to have one Datsource Num ID as defined for your version and Source System.

Similar Messages

Content conversion for multiple recordesets of the same type

Hi
I have a scenario where in i have the follwing structure
BXX
<>
HDR
<>
ITM1
<>
*TM2
<>
Now sometimes i get mutiple records like the following
BXX
<>
HDR (first occurance)
<>
ITM1
<>
ITM2
<>
HDR (2nd occurance)
<>
ITM1
<>
ITM2
<>
ITM3
<>
HDR (Third occurance)
*So now how should my content conversion be to achieve this.*

>>Now sometimes i get multiple records like the following
What kind of source file you are getting? If this is a flat file, the structure should not come with multiple recordset in a single line.
You should get multiple lines. like below
BXX *** HDR1 *** ITM1 *** ITM2
BXX *** HDR2 *** ITM1 *** ITM2
BXX *** HDR3 *** ITM1 *** ITM2
If you are not getting structure like above, you should ask the source application to send in that way.
All applications i have seen give the structure i mentioned above.
The structure which you have mentioned comes in XML file. (one parent-multiple children)
Thanks
Aamir

Deploy multiple instances of the same stateless session EJB

I have a stateless session bean.
The methods on the bean operate against DB tables.
Q: Can I deploy multiple instances of the same stateless session bean, but specify a different JNDI/datasource name in the deployment descriptor?
The method calls are all enclosed within a single invocation, just that I need to hit different databases (all with the same schema), and Id like to be able to lookup the EJB via a different JNDI name, and have the exact same functionality, just against different deployed datasources.
Does the spec allow/support this?
If not, any suggestions as to how to achieve this sort of functionality?
Im using JBoss 3.2.1 on Solaris, so Im not sure whether or not this is a JBoss "issue" or a limitation of the EJB Spec (or me being just plain wrong and trying to do something the "wrong way")
Nick

I have a stateless session bean.
The methods on the bean operate against DB tables.
Q: Can I deploy multiple instances of the same
stateless session bean, but specify a different
JNDI/datasource name in the deployment descriptor?
The method calls are all enclosed within a single
invocation, just that I need to hit different
databases (all with the same schema), and Id like to
be able to lookup the EJB via a different JNDI name,
and have the exact same functionality, just against
different deployed datasources.
Does the spec allow/support this?
If not, any suggestions as to how to achieve this sort
of functionality?
Im using JBoss 3.2.1 on Solaris, so Im not sure
whether or not this is a JBoss "issue" or a limitation
of the EJB Spec (or me being just plain wrong and
trying to do something the "wrong way")
NickI haven't done it but judging from the deployment descriptors yes.
For example if I have two bounded datasources java:/Database1 and java:/Database2
Lets say I have a session bean called MySession, then in your ejb-jar.xml you would have (notice that the desc, display, and ejb-name are the only differences)
<session>
<description>MySessionAlpha</description>
<display-name>MySessionAlpha</display-name>
<ejb-name>MySessionAlpha</ejb-name>
<home>com.mycorp.MySessionRemoteHome</home>
<remote>com.mycorp.MySessionRemote</remote>
<local-home>com.mycorp.MySessionLocalHome</local-home>
<local>com.mycorp.MySessionLocal</local>
<ejb-class>com.mycorp.MySessionFacadeBean</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
<resource-ref>
<res-ref-name>jdbc/DataSource</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</session>
<session>
<description>MySessionBeta</description>
<display-name>MySessionBeta</display-name>
<ejb-name>MySessionBeta</ejb-name>
<home>com.mycorp.MySessionRemoteHome</home>
<remote>com.mycorp.MySessionRemote</remote>
<local-home>com.mycorp.MySessionLocalHome</local-home>
<local>com.mycorp.MySessionLocal</local>
<ejb-class>com.mycorp.MySessionFacadeBean</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
<resource-ref>
<res-ref-name>jdbc/DataSource</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</session>
But now in the jboss.xml, we will have the following elements. What you may notice is that are bound to different remote and local jndi names. But the resource bindings are very different. The res-ref-name stays the same, but the jndi-name are different. I think this will work for you.
<session>
<ejb-name>MySessionAlpha</ejb-name> <jndi-name>ejb/com/mycorp/MySessionAlphaRemoteHome</jndi-name> <local-jndi-name>ejb/com/mycorp/MySessionAlphaLocalHome</local-jndi-name>
<resource-ref>
<res-ref-name>jdbc/datasource</res-ref-name>
<jndi-name>java:/Database1</jndi-name>
</resource-ref>
</session>
<session>
<ejb-name>MySessionBeta</ejb-name> <jndi-name>ejb/com/mycorp/MySessionBetaRemoteHome</jndi-name> <local-jndi-name>ejb/com/mycorp/MySessionBetaLocalHome</local-jndi-name>
<resource-ref>
<res-ref-name>jdbc/datasource</res-ref-name>
<jndi-name>java:/Database2</jndi-name>
</resource-ref>
</session>

How do I have multiple accounts on the same computer

how do I have multiple accounts on the same computer? The idea of ", hold down the option (on a Mac)/ shift (on a PC) key each time you start iTunes" does not seem to work for me. Thanks.

Create multiple Windows User Profile with each managing his own iTunes account and library.
To create a user account on Windows 7:
To open User Accounts, click the Start button , click Control Panel, under 'User Accounts and Family Safety', select Add or Remove User Accounts.
Click Create a new account.
Type the name you want to give the user account, click an account type(make sure to give Administrator), and then click Create Account.

Multiple users, using the same web app items?

Iam building a service for familes were the parents should be able to read / add / edit the same secure web app items.
So when logged in the user have access to the same user submitted web app items.
I found a thread answerd by Liam and my guess this is not possible? Can it be partial be done e.g. just let the "family" read the familys items? And no there is not possible to add / pair the users in backend because there are to many.
Any tip where to look? I have tried to use the "uniqe ID, datasource, unique template" method but do you "wizards" :-) think that's the way to go?
This thread suggest it's not doable.
http://forums.adobe.com/message/5547102
Thanks!
//Johan
Formpartner

Not in association Johan no.
You can have one "Family" login they all use to log in but it will kick one out if the other logs in and of course, multiple people sharing the same login increases the security risk.
You can only set one owner as well.

Load multiple files using the same data load location

has anybody tried loading multiple files using the same load locations. I need to do this as the data in these multiple files will need to be exported from FDM as a single export file. the problem i am facing is more user related. since these files will be received at different points of time, users will need a way to tell them what has been loaded and what is yet to be loaded.
is it possible to throw a window on the web broser with OK and Cancel buttons from an event script?
any pointers to possible solutions will be helpful

was able to resolve this. the implementation method is as follows
take a back up of previously imported data in the befcleardata event script. then in the beffileimport event append the data to the import file. there are many other intricacies but this is the broad implementation logic. it allowed my users to load multiple files without worrying about append or replace import type choices

Lightroom CC issues with multiple export at the same time

Back before Lightroom updated to the CC version, I was able to use export presets to send 4 different versions of the photos I'm working on at the same time (A Full Size for client at certain size, full size for myself, web-sized with watermark and a thumbnail). Since updating to the CC version, I'm only able to start the export process on two of these versions before the system simply becomes crippled and I cannot even navigate through Lightroom without it chugging along.
For reference, I'm running a 2014 rMBP with 16GB of RAM, LR is the only app open at the time and it's showing that I have roughly 6GB of RAM free when attempting this export.
TL;DR: LR5 worked wiht multiple exports at the same time, but LRCC now chugs after 2 exports are started

Re: "Selecting video in Messages, now starts Face time for video. Face time is one to one only."
Apple "Messages" supports two different types of video conferencing. It's become more than a little confusing. If you (or the person on the other end) ONLY have accounts set up for Apple's "iMessage" service (associated with your Apple ID and "iCloud") you may see the video symbol, but when you click on it you will be connected via FaceTime which is limited a 1-to-1 video conference.
However, if you have set up an AIM account in Messages (you may already have an AIM account ID if you once used iChat for video, audio and screensharing) and the person at the other end also has an AIM account you will be connected via AIM and will be able to do screen sharing and multi-person video conferences just like the old iChat, i.e. you'll have iChat Theater features, up to 4-way conferencing, etc.
It can get very confusing if, for example, you've signed up for AIM using a .me or .cloud email address. But once you have it set up and learn to recognise the way Messages switches between AIM and iMessage all the old iChat features work just fine in Messages.

CLR trigger - handling multiple inserts at the same time

Hi
I've developed a CLR trigger which operates on inserts performed on a staging table. The trigger implements some business logic and then inserts or updates a record in a target table. Whether an insert or update is performed depends on whether
a record with the same ID already exists in the target (i.e. a select * from target where ID = 123).
This works fine in most scenarios, but occasionally I am getting duplicates in the target table and have noticed that this seems to occur when inserts on the staging table happen at exactly the same time (i.e. multiple inserts for the same ID at
the same time). In this situation duplicates are created in the target table because at the time of the inserts, no record with that ID exists in the target table (i.e. the select returns no records), therefore a new record is created for each.
Is there a known way to deal with this scenario? For example, would locking the target table on insert result in the subsequent selects against the target table waiting until the target table had been updated, therefore the select would return a record
for the given ID.
I didn't really want to lock the whole target table on insert, because there are potentially other users reading that table (selects) and these would also have to wait for the insert to complete.
I'd appreciate any thoughts on how to deal with this and avoid duplicates in the target table. I'm unable to change the way the data is coming in to the staging table, so my trigger code must deal with the above scenario.
Thanks in advance.
John

First if you do not want any duplicate values in a column (or combination of columns) you should add a constraint to ensure this is never possible. A
unique index
like this should do this trick.
CREATE UNIQUE NONCLUSTERED INDEX [IX_yourIndexName] ON [dbo].[YourTableName]
[yourColumn1] ASC,
-- add more columns that make the unique combination that you don't want repeated
You can then add a try/catch block in your trigger code, if you get an exception based on this index then the record was created by another executing instance of this trigger and in that case you should do an update (or not, not sure what the rest of your
logic is) in your catch block. This is the easiest solution and does not involve table locks. The only drawback is the first one to commit the insert will win and you have no guarantee which process or data set that will be. Also i have no idea how big the
table is, how frequently changes are made, and what the data type is so you should
keep this in mind when creating your index so you don't run into unexpected high index fragmentation which can lead to performance problems when executing updates and inserts.
You could also create a
named transaction with scope serializable around your insert/update block and execute your reads using a
NOLOCK hint
which should allow them to retrieve uncommitted writes and not create a long wait. The downside is is that the data might not be 100% accurate depending on if a transaction fails or not if there happens to be an update at the same time as a select but maybe
this is not a big deal to the calling code.
-Igor

Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
the incorrect entry? Adobe installed a very quick update today.

They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''<u>may</u>''' need to update)
* Shockwave Flash 10.1 r53
* Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''<u>but use IE</u>''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''<u>Download link and other information</u>''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

Can you avoid multiple clips of the same media in a project

We have 2 suites and we sometimes work together on a common project utilising the same media.
If I want to use a sequence from the other suite I can easily import it.
The problem: it creates another folder with clips that only belong to the imported sequence.
The end result after a few imported sequences is that my final timeline has instances in it that
are from clips belonging to several different folders or bins even though the media is the same.
In summary... is there a way you can avoid having multiple clips of the same media in a project.
Makes for a very messy project when you have finished.
You've got multiple clips with the same name scattered everywhere.
Cheers

Not yet.
I'm kind of hoping this type of media management will be vastly improved in CS6, whose main new 'feature' reeeeeally needs to be outstanding network collaboration with other editors working on the same project.

Multiple instances of the same bean class in session?

I�m trying to think of a way to have multiple instances of the same bean class in session scope using JSF. For example, let�s say that I have two <h:dataTable>s on the same page. They both use the backing bean called genericBean. Now, the content for genericBean will be different for each <h:dataTable>. In fact, the data source that backs genericBean is not known until runtime. It could be a database, web service, etc.
What I would like is for when JSF needs access genericBean instead of looking for the value with key �genericBean� in the session map it looks for �genericBean_[some runtime ID]�. I could specify this id in EL on a custom component, as a request parameter or whatever.
I think that I need the bean to be in session scope because the tables are complex and I want them to be editable.
I have some ideas about how I can do this but I was wondering if someone has already solved this problem or if there is a standard way to do this using tools like Shale, etc.
Thanks,
Randy

Well, I came up with an interesting solution to this so I thought that I would post it here.
I have a page that looks like this.
<html>
<head>
<title>My Page</title>
</head>
<body>
<f:view>
<f:subview id="component1">
<jsp:include page="component.jsp">
<jsp:param name="id" value="a" />
</jsp:include>
</f:subview>
<hr>
<f:subview id="component2">
<jsp:include page="component.jsp">
<jsp:param name="id" value="b" />
</jsp:include>
</f:subview>
</f:view>
</body>
</html>
And component.jsp looke like this.
<f:verbatim>
<p>
<h1>Component
</f:verbatim>
<h:outputText value=" #{param.id}" />
<f:verbatim>
</h1>
</p>
</f:verbatim>
<h:form>
<h:outputText value="#{component.id}" />
<h:outputText value="#{component.value}" />
<h:commandButton value="increment" action="#{component.increment}" />
<h:commandButton value="decrement" action="#{component.decrement}" />
<f:verbatim>
<input type="hidden" name="id"
value="</f:verbatim><h:outputText value="#{param.id}"/><f:verbatim>" />
</f:verbatim>
</h:form>
The idea is that I want component.jsp to be initialized differently based on the id param. The component managed bean is configured to be in session scope but I want the component instance for id a and id b to be different instances in session scope. Therefore, I added a custom variable resolver to handle this.
public Object resolveVariable(FacesContext context, String name) {
// This id will be different for the different subviews.
HttpServletRequest request = (HttpServletRequest) context.getExternalContext() .getRequest();
String id = request.getParameter("id");
// If there is an id in the request then check if this is a bean that can have multiple
// instances in session scope.
if ((id != null) && (id.length() > 0)) {
ExternalContext ec = context.getExternalContext();
// Build the new name for the key of this bean
String newName = name + "_" + id;
Object value = null;
// See if the bean instance already esists.
if ((null == (value = ec.getRequestMap().get(newName))) &&
(null == (value = ec.getSessionMap().get(newName))) &&
(null == (value = ec.getApplicationMap().get(newName)))) {
     // We could not find the bean instance in scope so create the bean
     // using the standard variable resolver.
value = original.resolveVariable(context, name);
// Now check if the bean implements that page component interface. If it is
// a page component then we want to rename the key to access this bean so
// that the instance is only used when the id is provided in the request.
// For example, if there are two components (a and b) we will have in session scope
// component_a and component_b. The will each point to a unique instance of the
// Component bean class.
if (value instanceof PageComponent) {
// Try to get the value again
if (null != (value = ec.getRequestMap().get(name))) {
     // Initialize the bean using the id
((PageComponent) value).initInstance(id);
ec.getRequestMap().remove(name);
ec.getRequestMap().put(newName, value);
} else if (null != (value = ec.getSessionMap().get(name))) {
((PageComponent) value).initInstance(id);
ec.getSessionMap().remove(name);
ec.getSessionMap().put(newName, value);
} else if (null != (value = ec.getApplicationMap().get(name))) {
((PageComponent) value).initInstance(id);
ec.getApplicationMap().remove(name);
ec.getApplicationMap().put(newName, value);
return value;
return original.resolveVariable(context, name);
}

Loading multiple instances of the same loader

Hello everyone,
I am trying to load in 5 pictures but 2 of those pictures need to be added multiple times to the same scene. For example you would use Loader to load one tree but would show that tree 9 times. The problem I am experiencing is that each object loads fine once but objects that are the same with different x and y values are placed at the last location that was set in the loop.
            for(var i=0; i < LoadedXml.resources.resource.(@type==LoadedXml.resources.resource.@type[fileCount]).@coun t; i++)
                sprite.name = LoadedXml.resources.resource.@type[fileCount] + i;
                sprite.x = LoadedXml.objects.object.(@type==LoadedXml.resources.resource.@type[fileCount] && @instance == i).@x;
                sprite.y = LoadedXml.objects.object.(@type==LoadedXml.resources.resource.@type[fileCount] && @instance == i).@y;
                table.push(sprite);
this code sets the properties but say the count is equal to 9 and the last x and y set is 20 , 20. Then all of the objects are placed at 20,20. Even though they are clearly placed in there own element within the array. If anyone can help please please do it.
Dexter

then your xml parsing is faulty.

Multiple accounts on the same resource

Experts,
I am trying to create multiple accounts for the same IDM user.
I have written a workflow which calls the subprocess to create multiple accounts. In the orignal workflow I pass the IDM accountId and the target system accountid in the Iterate loop.
In the subprocess i am checking out the user view then appending the resource specific parameters (mentioned below) and then checking in the view.
<Activity id='1' name='Add resource to user object'>
<Variable name='userObject'/>
<Action id='1' name='CheckOut User View' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='checkoutView'/>
<Argument name='type' value='User'/>
<Argument name='id'>
<ref>userId</ref>
</Argument>
<Argument name='TargetResources' value='EDS'/>
<Argument name='authorized' value='true'/>
<Argument name='Form' value="Empty Form"/>
<Variable name='view'/>
<Return from='view' to='user'/>
</Action>
<Action id='2' name='Add Attribute'>
<expression>
<block>
<set name='applicationuserid'>
<invoke name='get'>
<split>
<ref>userid_applicationid</ref>
<s>#</s>
</split>
<i>0</i>
</invoke>
</set>
<set name='resourcename'>
<invoke name='get'>
<split>
<ref>userid_applicationid</ref>
<s>#</s>
</split>
<i>1</i>
</invoke>
</set>
<set name='user.waveset.resources'>
<appendAll>
<ref>user.waveset.resources</ref>
<list>
<s>RACF</s>
</list>
</appendAll>
</set>
<set>
<concat>
<s>user.accounts[</s>
<ref>resourcename</ref>
<s>].created</s>
</concat>
<s>true</s>
</set>
<set>
<s>waveset.accounts[RACF].id</s>
<get>
<invoke name='getObject'>
<invoke name='getLighthouseContext'>
<ref>WF_CONTEXT</ref>
</invoke>
<s>Resource</s>
<s>RACF</s>
<Map>
<MapEntry key='action' value='update'/>
</Map>
</invoke>
<s>id</s>
</get>
</set>
<set>
<concat>
<s>user.accounts[</s>
<s>RACF</s>
<s>].name</s>
</concat>
<s>RACF</s>
</set>
<set>
<concat>
<s>user.accounts[</s>
<ref>resourcename</ref>
<s>].gapracfid</s>
</concat>
<ref>applicationuserid</ref>
</set>
<set>
<concat>
<s>user.accounts[</s>
<ref>resourcename</ref>
<s>].identity</s>
</concat>
<concat>
<s>uid=</s>
<ref>applicationuserid</ref>
<s>,ou=racf,ou=Applications,dc=gap,dc=com</s>
</concat>
</set>
<set>
<concat>
<s>user.accounts[</s>
<ref>resourcename</ref>
<s>].firstname</s>
</concat>
<ref>user.accounts[Lighthouse].firstname</ref>
</set>
<set>
<concat>
<s>user.accounts[</s>
<ref>resourcename</ref>
<s>].lastname</s>
</concat>
<ref>user.accounts[Lighthouse].lastname</ref>
</set>
<set>
<concat>
<s>user.accounts[</s>
<ref>resourcename</ref>
<s>].fullname</s>
</concat>
<ref>user.accounts[Lighthouse].fullname</ref>
</set>
</block>
</expression>
</Action>
<Action id='3' name='Check In User View' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='checkinView'/>
<Argument name='view' value='$(user)'/>
<Argument name='authorized' value='true'/>
<Argument name='Form' value="Empty Form"/>
</Action>
<Transition to='end'/>
<WorkflowEditor x='244' y='48'/>
</Activity>
When i run this in the IDM I can see all the entries but only first one is actually created on the target resource. When I open the user object in IDM and hit Save button IDM creates the accounts on the target system.
I have already tried by using the refresh view just before the checkin view action but no luck..
Any help for solving this problem would be appreciated.
Thanks

Thanks for the reply... in my case this would be done by the active synch process so no GUI form is required. I will be getting a list of application ID for the user by LDAP AS. One i get it i will have to parse it and get the list of application user id. I am passing those ID;s to a workflow where I am forming the resource name as you mentioned
for example:
If i get user1#user2#user3 from AS i am separating them based on # using split and getting 3 different user id;s
now i am forming a string with the resource name and passing it to the sub process in which i am checking out the user object, setting the user attributes and checking in the new view.
user1#LDAP
user2#LDAP|1
user3#LDAP|2
Problem ; When i run this user1 is getting created in LDAP but user2 and user3 are not. There entry is getting created in IDM.
When I open the IDM object I get a yellow triangle (warning) and if I open the user object and hit save button IDM creates the user account on the LDAP.
any help for further solving this problem would be appreciated.
Regards,

How to carry out multiple searches on the same engine simultaneously.

As mentioned above. I'm looking for a way to search multiple text at the same time.

Can you give a more detailed example of what you mean?
For example:
* Do you want to type query #1 into the search box or address bar and open it in results tab #1, then type query #2 into the search box or address bar and open it in results tab #2? To do that, hold down the Alt key when pressing Enter or hold down the Ctrl key when clicking the icon that submits your search.
* Do you want to combine numerous queries into a single request to Google and get the results all mixed together? You can use OR (must be in capital letters) with quotation marks or parentheses for grouping. For example: Android OR ios OR "windows phone"
* Something else?

Multiple copies of the same photo on a page in iPhoto 11?

Can I print multiple copies of the same photo on a page in iPhoto 11?

Try the following:
1 - put the photo in an album and duplicate it as many times as the number of prints you want on a given page. This is assuming the page is US Letter (borderless).
2 - select all the prints and type Command+P (Print).
3 - in the next window select Paper Size to be US Letter (borderless).
4 - also, at the bottom of the window, select the aspect ratio and a custom size that will allow you to get all of the photos on one page.
This screenshot is for a photo that has a size ratio of 4:3, was duplicated 3 times and then printed with a custom size of 4x3 selected to get four prints on the page. You can experiment the custom size until you get the largest possible size for the 4 photos on the page.
OT

Multiple DataSources of the same type (e.g. Peoplesoft Financials) in DAC

Similar Messages

Maybe you are looking for