Multiple dynamic Hyperlinks in Single Cell
My Requirement is similar to
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/c3f1cbeb-20b8-4457-9189-3e451c2a5af9/multiple-hyperlinks-in-single-cell-in-ssrs?forum=sqlreportingservices
single Data column will be displaying csv values and need to build hyperlink for each item in new window.
Eg-
Bike,car,bus
Bike,car,Bus,Tram
When user selected data,
In an single cell of my ssrs, i need to display an column which can hyperlink to respective page
The values are coming from an table column as comma separated values.
ShanmugaRaj
Hi,
I think you can use place holders to put these three values seperatly and set an action property on the placeholder. Is the values in the hyperlink are static or dynamic ?
Best Regards Sorna
Similar Messages
-
Multiple values in a single cell in report !!
Hello,
I want to display multiple values in a single cell, each value separated by comma.
Ex: I have Employee and Department.
If a employee works for many departments, all the Department names should be displayed in the same cell in the report.
Please help !Thanks for your replies !
Is there any other way to achieve this ?
There is 1 InfoObject which has 2 fields Employee and Department.
Employee Department
001 A
001 B
001 C
In the report there should be 1 row for Employee 001 with all the Departments displayed in the same cell separated by commas.
Can this be done in the backend through a ABAP code? -
I would like to know if there is a way to add multiple borders to a single cell or selection of cells in one click. At this time, if i want to add for example a top border and a bottom border to a single cell I have to do this in two steps: first select the top border, style, thickness, and color, and then next select the bottom border, style, thickness, and color. Is there a way to select the top and bottom border of a cell in one click? Clicking on the top border then holding down the command key while selecting the bottom border does not work, nor does holding down the option key, the control key, or the shift key work. Thanks for your help.
Thank you for the suggestion but this did not work for my Mac. When a cell is selected for which I want borders, the entire cell is lit up. Then when I go to the border tool and select style, thickness, and color, the entire lit up cell takes on the border, that is the Outside Edges of the cell now have a border. So selecting the style, thickness, and color first doesn't work.
If I select the top border first (or any border), the drop down goes away and I can't select multiple borders - I get to choose one at a time. After selecting one border, style, thickness, and color, said border is now on the spreadsheet. Then I go back to the border selection and pick another border and the the previously selected style, thickness, and color reverts to null, so I start over with the new border style, thickness, and color. Yes, it is tedious.
The Fix would allow the user to select multiple borders, say left and right, before the drop down goes away after selecting only one border
Does it have something to do with Allow or Disallow border selection?
I have Numbers '09 version 2.1 (436) -
Dynamic Alerts per single cell in a dashboard
Hi,
I am trying to create a dashboard in which the main requirement is to show alerts per cell in a table(either in a spreadsheet table or scorecard component).
I have used the spreadsheet table to display data and used rectangle components on top of each cell of the spreadsheet to display alerts based on dynamic visibility.
This kind of solves the problem of single cell alerts, but here another issue is, if the data for a given selection in the header navigation has only 5 columns as opposed to 10 columns for a different selection, the width of the spreadsheet cell is not dynamically picking up as the user wants the no. of output columns to be evenly distributed in the component than re-sizing the component of the canvas.
I am trying to use Scorecard alerts, but i don't know how to create dynamic range.
Here is the condition of my alerts...
From database per data row, i will have either R or G(the logic is pre-calculated )
If the query retrieves R per row for that fact value, then show that fact value as number and display the alert in RED
Similarly for G, display GREEN color.
Can someone help how to accomplish this?
Thanks,
Medha.Have you mapped the alerter values correctly ? Can you provide a full screenshot of the alerter configuration screen ?
-
Copy and Paste Multiple lines into a single cell
Folks:
I need to copy some plain text data into a single cell that has been merged with other cells to provider a larger unit; however, every time I copy and paste my data it gives me an error. In addition, if I paste the data into a single cell, the next line
of data inserts into the next row.
I understand that Alt+enter is a quick way to do what I want, but I already have the data typed out, and I do not want to type the data again.
Example: (If possible I want in one single cell)
Disks=32
Total space=1.74TB
Used space=1.20TB
Free space=0.54TB
Thank you!!!Is there any way to do this but keep the source formatting? I don't see any "Paste Special" options when you do it this way.
That is not possible - when you copy/paste this way, you only copy the plain text, not the formatting. You'll have to apply formatting to the cell with pasted lines from scratch.
Regards, Hans Vogelaar (http://www.eileenslounge.com) -
Multiple Lines in a Jtable Cell
I am trying to place multiple lines in a single cell of Jtable
The text Of the cell comes from the database.I am trying to do it using a JLabel .If anyone can help me please do so
thanks
kishore
[email protected]It can be done but it is quite a lot of work. Basically you have to produce your own cell renderer and use that instead. A good book on swing will tell you how to do it.
-
How to show multiple dynamic tables on a single screen?
right now im displaying alv for singlr attribute of dimension.
eg for dimension PRODUCT attribute PROFITCENTER im displaying in alv when user executes it.
but the requirement is that multiple attributes can be there so multiple tables is to be displayed on a single screen.
User basically wants to see data of all attributes. if there are 10 attributes hee wants to see 10 tables as every attribute has a different table.
what i have achieved is below in snapshots. only one attribute table PRODUCT im able to display. since i believe multiple headers cant be displyed in alv so even if i display multiple dynamically populated tables on a single screen then it will be fine.
i have also ADDED my code below: ZMDREPORT
this report is for SAP BPC.
*& Report ZMDREPORT
REPORT zmdreport.
TABLES /1cpmb/bfrdp3rp.
DATA: gw_datatbl TYPE tabname,
gw_datatbl1 TYPE tabname,
gw_descrptbl TYPE tabname,
gw_attribute TYPE tabname.
DATA:
BEGIN OF gw_attr,
appset_id TYPE uja_dim_attr-appset_id,
dimension TYPE uja_dim_attr-dimension,
tech_name TYPE uja_dim_attr-tech_name,
attribute_name TYPE uja_dim_attr-attribute_name,
caption TYPE uja_dim_attr-caption,
END OF gw_attr,
gt_attr LIKE TABLE OF gw_attr.
DATA: gt_slis_fcat1 TYPE slis_t_fieldcat_alv,
gw_slis_fcat1 LIKE LINE OF gt_slis_fcat1.
DATA : gt_except TYPE TABLE OF zbpcbt007,
gw_except LIKE LINE OF gt_except,
gt_except_t TYPE TABLE OF zbpcbt007,
gt_attrib TYPE TABLE OF tabname,
gw_attrib LIKE LINE OF gt_attrib.
DATA: gr_r_ref TYPE REF TO data.
DATA:BEGIN OF gw_mdr,
appset_id TYPE uj_appset_id,
dimension TYPE uj_dim_name,
reasoncd TYPE zmdreason,
refdimension TYPE uj_dim_name,
attrib TYPE uj_attr_name,
END OF gw_mdr,
gt_mdr1 LIKE TABLE OF gw_mdr,
gt_mdr2 LIKE TABLE OF gw_mdr,
gt_mdtable1 TYPE zbpctt_attr,
gt_mdtable2 TYPE zbpctt_attr,
gw_mdtable2 LIKE LINE OF gt_mdtable2,
gt_mdtable3 TYPE zbpctt_attr,
gt_mdtable4 TYPE zbpctt_attr,
gw_mdtable4 LIKE LINE OF gt_mdtable4,
BEGIN OF gw_finalattr,
dim(32) TYPE c,
END OF gw_finalattr,
gt_finalattr LIKE TABLE OF gw_finalattr,
gt_tab1 LIKE TABLE OF gw_finalattr,
gw_tab1 LIKE LINE OF gt_tab1,
gt_tab2 LIKE TABLE OF gw_finalattr,
gw_tab2 LIKE LINE OF gt_tab2.
FIELD-SYMBOLS: <gfs_tab1> TYPE STANDARD TABLE.
FIELD-SYMBOLS: <gfs_tab2> TYPE STANDARD TABLE,
<gfs_tab3> TYPE STANDARD TABLE,
<gfs_tab4> TYPE STANDARD TABLE.
FIELD-SYMBOLS:<gfs_attr> TYPE any,
<gfs_field3> TYPE any,
<gfs_field4> TYPE any.
DATA: gw_sortcond TYPE string.
FIELD-SYMBOLS: <gfs_t_final> TYPE STANDARD TABLE.
FIELD-SYMBOLS: <gfs_final> TYPE any.
FIELD-SYMBOLS: <gfs_data> TYPE any .
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_env TYPE uja_dimension-appset_id OBLIGATORY.
PARAMETERS: p_dim TYPE uja_dimension-dimension OBLIGATORY.
SELECT-OPTIONS: s_member FOR /1cpmb/bfrdp3rp-mbr_name .
PARAMETERS: p_hir TYPE /1cpmb/bfrdp3rp-/cpmb/hir.
PARAMETERS:p_attr TYPE uj_attr_name MODIF ID m1.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_radio1 RADIOBUTTON GROUP g1 USER-COMMAND abc DEFAULT 'X',
p_radio2 RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_reason TYPE zbpcbt007-reasoncd MODIF ID m1.
SELECTION-SCREEN END OF BLOCK b3.
*********************************************************************alv
DATA :gt_fcat TYPE lvc_t_fcat.
DATA: gw_ok_code TYPE sy-ucomm,
gw_okcode TYPE sy-ucomm.
DATA: go_custom_container TYPE REF TO cl_gui_custom_container,
gw_g_container TYPE scrfname VALUE 'CC1',
go_grid1 TYPE REF TO cl_gui_alv_grid.
DATA:BEGIN OF gw_table,
dimension TYPE uja_dimension-dimension,
END OF gw_table,
gt_tab LIKE TABLE OF gw_table ,
BEGIN OF gw_member,
mbr_name TYPE uj_dim_member,
END OF gw_member ,
gt_member LIKE TABLE OF gw_member,
BEGIN OF gw_hir ,
hir TYPE /1cpmb/bfrdp3rp-/cpmb/hir,
END OF gw_hir,
gt_hir LIKE TABLE OF gw_hir.
DATA:gt_slis_fcat2 TYPE slis_t_fieldcat_alv,
gw_slis_fcat2 LIKE LINE OF gt_slis_fcat2 .
DATA: lr_data TYPE REF TO data.
DATA :gt_fcat1 TYPE lvc_t_fcat,
gt_fcat2 TYPE lvc_t_fcat,
gt_fcat3 TYPE lvc_t_fcat,
gt_fcat2_t TYPE lvc_t_fcat,
gw_fcat LIKE LINE OF gt_fcat2,
gw_fcat3 LIKE LINE OF gt_fcat3.
DATA: gt_fcat3_t LIKE gt_fcat3.
DATA: gw_desc TYPE uj_desc.
DATA : gw_string TYPE string,
gw_str TYPE string.
DATA: gw_len TYPE string,
BEGIN OF gw_refdim,
dimension TYPE uja_dimension-dimension,
END OF gw_refdim,
gt_refdim LIKE TABLE OF gw_refdim,
gt_refdim_t LIKE TABLE OF gw_refdim,
BEGIN OF gw_refdata,
data_table TYPE tabname,
desc_table TYPE tabname,
END OF gw_refdata,
gt_refdata LIKE TABLE OF gw_refdata,
BEGIN OF gw_techattr,
tech_name TYPE uja_dim_attr-tech_name,
END OF gw_techattr,
gt_techattr LIKE TABLE OF gw_techattr,
gw_cond TYPE string.
DATA:gw_hircond TYPE string.
DATA: gt_dynpread TYPE TABLE OF dynpread,
gw_dynpread LIKE LINE OF gt_dynpread,
gw_dynpread2 LIKE LINE OF gt_dynpread,
gw_dim TYPE string,
gw_env TYPE string.
FIELD-SYMBOLS: <gfs_w_tab1> TYPE any,
<gfs_w_tab2> TYPE any,
<gfs_w_tab3> TYPE any,
<gfs_field> TYPE any,
<gfs_field2> TYPE any,
<gfs_field_final> TYPE any,
<gfs_s_fcat> TYPE lvc_s_fcat,
<gfs_s_fcat2> TYPE lvc_s_fcat,
<gfs_s_fcat3> TYPE lvc_s_fcat
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_dim.
REFRESH gt_dynpread.
gw_dynpread-fieldname = 'P_ENV'.
APPEND gw_dynpread TO gt_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
* TRANSLATE_TO_UPPER = ' '
* REQUEST = ' '
* PERFORM_CONVERSION_EXITS = ' '
* PERFORM_INPUT_CONVERSION = ' '
* DETERMINE_LOOP_INDEX = ' '
* START_SEARCH_IN_CURRENT_SCREEN = 'X'
* start_search_in_main_screen = ' '
* START_SEARCH_IN_STACKED_SCREEN = ' '
* START_SEARCH_ON_SCR_STACKPOS = ' '
* SEARCH_OWN_SUBSCREENS_FIRST = ' '
* SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
dynpfields = gt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE gt_dynpread INTO gw_dynpread INDEX 1.
IF sy-subrc EQ 0.
TRY .
REFRESH gt_tab.
SELECT dimension
FROM uja_dimension CLIENT SPECIFIED
INTO TABLE gt_tab
WHERE mandt EQ sy-mandt
AND appset_id EQ gw_dynpread-fieldvalue.
IF sy-subrc EQ 0.
SORT gt_tab BY dimension.
DELETE ADJACENT DUPLICATES FROM gt_tab COMPARING dimension.
IF gt_tab IS NOT INITIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST' "#EC CI_SUBRC
EXPORTING
* DDIC_STRUCTURE = ''
retfield = 'DIMENSION'
* PVALKEY = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'P_DIM'(004)
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
value_org = 'S'
* MULTIPLE_CHOICE = ' '
* display = ''
* CALLBACK_PROGRAM = ' '
* CALLBACK_FORM = ' '
* CALLBACK_METHOD =
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
value_tab = gt_tab
* FIELD_TAB =
* RETURN_TAB =
* DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc NE 0.
ENDIF.
ENDIF.
ENDIF.
CATCH cx_root.
ENDTRY.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_member-low.
REFRESH gt_dynpread.
gw_dynpread-fieldname = 'P_ENV'.
APPEND gw_dynpread TO gt_dynpread.
gw_dynpread-fieldname = 'P_DIM'.
APPEND gw_dynpread TO gt_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
* TRANSLATE_TO_UPPER = ' '
* REQUEST = ' '
* PERFORM_CONVERSION_EXITS = ' '
* PERFORM_INPUT_CONVERSION = ' '
* DETERMINE_LOOP_INDEX = ' '
* START_SEARCH_IN_CURRENT_SCREEN = 'X'
* start_search_in_main_screen = ' '
* START_SEARCH_IN_STACKED_SCREEN = ' '
* START_SEARCH_ON_SCR_STACKPOS = ' '
* SEARCH_OWN_SUBSCREENS_FIRST = ' '
* SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
dynpfields = gt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
SORT gt_dynpread BY fieldname.
DELETE ADJACENT DUPLICATES FROM gt_dynpread COMPARING fieldname.
IF gt_dynpread IS NOT INITIAL.
LOOP AT gt_dynpread INTO gw_dynpread.
IF gw_dynpread-fieldname EQ 'P_ENV'.
gw_env = gw_dynpread-fieldvalue.
ELSEIF gw_dynpread-fieldname EQ 'P_DIM'.
gw_dim = gw_dynpread-fieldvalue.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
CLEAR: gw_datatbl1, gt_member.
SELECT SINGLE data_table
INTO (gw_datatbl1)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ gw_env
AND dimension EQ gw_dim.
IF sy-subrc EQ 0.
TRY .
REFRESH gt_member.
SELECT mbr_name
INTO TABLE gt_member
FROM (gw_datatbl1) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt .
IF sy-subrc EQ 0.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
retfield = 'MBR_NAME'
* PVALKEY = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_MEMBER'
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
value_org = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
callback_program = sy-repid
callback_form = 'F4CALLBACK'
* CALLBACK_METHOD =
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
value_tab = gt_member
* FIELD_TAB =
* RETURN_TAB =
* DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDIF.
CATCH cx_root.
ENDTRY.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_member-high.
REFRESH gt_dynpread.
gw_dynpread-fieldname = 'P_ENV'.
APPEND gw_dynpread TO gt_dynpread.
gw_dynpread-fieldname = 'P_DIM'.
APPEND gw_dynpread TO gt_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
* TRANSLATE_TO_UPPER = ' '
* REQUEST = ' '
* PERFORM_CONVERSION_EXITS = ' '
* PERFORM_INPUT_CONVERSION = ' '
* DETERMINE_LOOP_INDEX = ' '
* START_SEARCH_IN_CURRENT_SCREEN = 'X'
* start_search_in_main_screen = ' '
* START_SEARCH_IN_STACKED_SCREEN = ' '
* START_SEARCH_ON_SCR_STACKPOS = ' '
* SEARCH_OWN_SUBSCREENS_FIRST = ' '
* SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
dynpfields = gt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
SORT gt_dynpread BY fieldname.
DELETE ADJACENT DUPLICATES FROM gt_dynpread COMPARING fieldname.
IF gt_dynpread IS NOT INITIAL.
LOOP AT gt_dynpread INTO gw_dynpread.
IF gw_dynpread-fieldname EQ 'P_ENV'.
gw_env = gw_dynpread-fieldvalue.
ELSEIF gw_dynpread-fieldname EQ 'P_DIM'.
gw_dim = gw_dynpread-fieldvalue.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
CLEAR: gw_datatbl1.
SELECT SINGLE data_table
INTO (gw_datatbl1)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ gw_env
AND dimension EQ gw_dim.
IF sy-subrc EQ 0.
TRY .
REFRESH gt_member.
SELECT mbr_name
INTO TABLE gt_member
FROM (gw_datatbl1) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt.
IF sy-subrc EQ 0.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
retfield = 'MBR_NAME'
* PVALKEY = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_MEMBER'
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
value_org = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
callback_program = sy-repid
callback_form = 'F4CALLBACK'
* CALLBACK_METHOD =
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
value_tab = gt_member
* FIELD_TAB =
* RETURN_TAB =
* DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDIF.
CATCH cx_root.
ENDTRY.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
*& Form F4CALLBACK
* text
* -->RECORD_TAB text
* -->SHLP text
* -->CALLCONTROL text
FORM f4callback TABLES record_tab STRUCTURE seahlpres
CHANGING shlp TYPE shlp_descr
callcontrol TYPE ddshf4ctrl.
callcontrol-no_maxdisp = ''.
ENDFORM. "F4CALLBACK
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_hir.
REFRESH gt_dynpread.
CLEAR gw_dynpread.
gw_dynpread-fieldname = 'P_ENV'.
APPEND gw_dynpread TO gt_dynpread.
gw_dynpread-fieldname = 'P_DIM'.
APPEND gw_dynpread TO gt_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
* TRANSLATE_TO_UPPER = ' '
* REQUEST = ' '
* PERFORM_CONVERSION_EXITS = ' '
* PERFORM_INPUT_CONVERSION = ' '
* DETERMINE_LOOP_INDEX = ' '
* START_SEARCH_IN_CURRENT_SCREEN = 'X'
* start_search_in_main_screen = ' '
* START_SEARCH_IN_STACKED_SCREEN = ' '
* START_SEARCH_ON_SCR_STACKPOS = ' '
* SEARCH_OWN_SUBSCREENS_FIRST = ' '
* SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
dynpfields = gt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
SORT gt_dynpread BY fieldname.
DELETE ADJACENT DUPLICATES FROM gt_dynpread COMPARING fieldname.
LOOP AT gt_dynpread INTO gw_dynpread.
IF gw_dynpread-fieldname EQ 'P_ENV'.
gw_env = gw_dynpread-fieldvalue.
ELSEIF gw_dynpread-fieldname EQ 'P_DIM'.
gw_dim = gw_dynpread-fieldvalue.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
CLEAR: gw_datatbl1.
SELECT SINGLE data_table
INTO (gw_datatbl1)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ gw_env
AND dimension EQ gw_dim.
IF sy-subrc EQ 0.
REFRESH gt_member.
TRY .
SELECT /cpmb/hir
INTO TABLE gt_hir
FROM (gw_datatbl1) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt.
IF sy-subrc EQ 0.
SORT gt_hir BY hir.
DELETE ADJACENT DUPLICATES FROM gt_hir COMPARING hir.
IF gt_hir IS NOT INITIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
retfield = '/CPMB/HIR'
* PVALKEY = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'P_HIR'
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
value_org = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
* CALLBACK_PROGRAM = ' '
* CALLBACK_FORM = ' '
* CALLBACK_METHOD =
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
value_tab = gt_hir
* FIELD_TAB =
* RETURN_TAB =
* DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDIF.
ENDIF.
CATCH cx_root.
ENDTRY.
ENDIF.
ENDIF.
ENDIF.
* CLASS lcl_main DEFINITION
CLASS lcl_main DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
create_alv1,
create_alv2,
create_alv3,
create_fieldcatalog,
create_dynamicalv,
merge_tables,
show_alv1
ENDCLASS. "lcl_main DEFINITION
* CLASS lcl_main IMPLEMENTATION
CLASS lcl_main IMPLEMENTATION.
METHOD create_fieldcatalog.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE' "#EC CI_SUBRC
EXPORTING
i_structure_name = gw_datatbl
CHANGING
ct_fieldcat = gt_fcat1
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE' "#EC CI_SUBRC
EXPORTING
i_structure_name = gw_descrptbl
CHANGING
ct_fieldcat = gt_fcat2
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDMETHOD. "create_fieldcatalog
METHOD create_dynamicalv.
* DATA: lr_data TYPE REF TO data.
CLEAR lr_data.
CALL METHOD cl_alv_table_create=>create_dynamic_table
"#EC CI_SUBRC
EXPORTING
* i_style_table =
it_fieldcatalog = gt_fcat2
* i_length_in_byte =
IMPORTING
ep_table = lr_data
* e_style_fname =
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2.
IF sy-subrc <> 0.
*MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMETHOD. "create_dynamicalv
METHOD merge_tables.
SORT gt_fcat2 BY col_pos.
ASSIGN lr_data->* TO <gfs_t_final>.
LOOP AT <gfs_tab1> ASSIGNING <gfs_w_tab1>.
APPEND INITIAL LINE TO <gfs_t_final> ASSIGNING <gfs_final>.
LOOP AT gt_fcat2 ASSIGNING <gfs_s_fcat>. "#EC CI_NESTED
ASSIGN COMPONENT <gfs_s_fcat>-fieldname OF STRUCTURE
<gfs_w_tab1> TO <gfs_field>.
IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
ASSIGN COMPONENT <gfs_s_fcat>-fieldname OF STRUCTURE
<gfs_final> TO <gfs_field_final>.
IF sy-subrc EQ 0 AND <gfs_field_final> IS ASSIGNED.
<gfs_field_final> = <gfs_field>.
ENDIF.
*** Creating dynamic where clause for the key fields
IF <gfs_s_fcat>-key = 'X'.
READ TABLE gt_fcat2_t ASSIGNING <gfs_s_fcat2>
WITH KEY
key = abap_true
fieldname = <gfs_s_fcat>-fieldname.
IF sy-subrc EQ 0.
IF gw_string IS INITIAL.
*Putting value into quotes
CONCATENATE `'` <gfs_field> `'` INTO gw_str.
*Concatenating first field into string
CONCATENATE <gfs_s_fcat>-fieldname '=' gw_str
INTO gw_string SEPARATED BY space.
CLEAR gw_str.
ELSE.
*Concatenating rest all key fields
CONCATENATE `'` <gfs_field> `'` INTO gw_str.
CONCATENATE gw_string 'AND' <gfs_s_fcat>-fieldname
'=' gw_str INTO gw_string SEPARATED BY space.
CLEAR gw_str.
ENDIF.
ENDIF.
*** End of Creation
ENDIF.
ENDIF.
ENDLOOP.
IF NOT gw_string IS INITIAL.
*Concatenating sy-langu (-> always present)
CONCATENATE gw_string 'AND LANGU = SY-LANGU'
INTO gw_string SEPARATED BY space.
ENDIF.
*** Filling Description field based on dynamically created where clause
LOOP AT <gfs_tab2> ASSIGNING <gfs_w_tab2> WHERE (gw_string).
"#EC CI_NESTED
ASSIGN COMPONENT 'TXTLG' OF STRUCTURE <gfs_w_tab2>
TO <gfs_field>.
IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
ASSIGN COMPONENT 'TXTLG' OF STRUCTURE <gfs_final>
TO <gfs_field_final>.
IF sy-subrc EQ 0 AND <gfs_field_final> IS ASSIGNED.
<gfs_field_final> = <gfs_field>.
ENDIF.
ENDIF.
ENDLOOP.
CLEAR gw_string.
ENDLOOP.
ENDMETHOD. "merge_tables
METHOD create_alv3.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_datatbl).
ASSIGN gr_r_ref->* TO <gfs_tab1>.
SELECT *
INTO TABLE <gfs_tab1>
FROM (gw_datatbl) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND mbr_name IN s_member
AND /cpmb/calc EQ 'N'.
IF sy-subrc EQ 0.
IF p_hir IS NOT INITIAL.
CLEAR gw_hircond.
CONCATENATE '/CPMB/HIR' 'NE' 'P_HIR' INTO gw_hircond
SEPARATED BY space.
DELETE <gfs_tab1> WHERE (gw_hircond).
ENDIF.
CLEAR: gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_descrptbl).
ASSIGN gr_r_ref->* TO <gfs_tab2>.
SELECT *
FROM (gw_descrptbl) CLIENT SPECIFIED
INTO TABLE <gfs_tab2>
WHERE mandt EQ sy-mandt
AND langu EQ sy-langu.
IF sy-subrc EQ 0.
READ TABLE gt_refdata INTO gw_refdata INDEX 1.
IF sy-subrc EQ 0.
CLEAR gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_refdata-data_table).
ASSIGN gr_r_ref->* TO <gfs_tab3>.
SELECT *
INTO TABLE <gfs_tab3>
FROM (gw_refdata-data_table) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND /cpmb/calc EQ 'N'.
IF sy-subrc EQ 0.
CLEAR gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_refdata-desc_table).
ASSIGN gr_r_ref->* TO <gfs_tab4>.
SELECT *
INTO TABLE <gfs_tab4>
FROM (gw_refdata-desc_table) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND langu EQ sy-langu.
lcl_main=>create_fieldcatalog( ).
gt_fcat2_t[] = gt_fcat2[].
DELETE gt_fcat2 WHERE fieldname NE 'TXTLG'.
APPEND LINES OF gt_fcat1 TO gt_fcat2.
gw_len = lines( gt_fcat2 ).
gw_len = gw_len + 1.
gw_fcat-fieldname = 'TXTLG1'.
gw_fcat-reptext = 'Attribute Description'.
gw_fcat-col_pos = gw_len.
gw_fcat-outputlen = 60.
APPEND gw_fcat TO gt_fcat2.
SORT gt_fcat2 BY fieldname.
READ TABLE gt_techattr INTO gw_techattr INDEX 1.
LOOP AT gt_fcat2 INTO gw_fcat.
READ TABLE gt_attr INTO gw_attr
WITH KEY tech_name = gw_fcat-fieldname.
IF sy-subrc EQ 0.
gw_fcat-reptext = gw_attr-caption.
ENDIF.
IF gw_fcat-fieldname = 'TXTLG'.
gw_fcat-outputlen = 60.
ENDIF.
MODIFY gt_fcat2 FROM gw_fcat TRANSPORTING
outputlen reptext .
IF gw_fcat-fieldname NE 'MBR_NAME'
AND gw_fcat-fieldname NE 'TXTLG'
AND gw_fcat-fieldname NE 'TXTLG1'
AND gw_fcat-fieldname NE gw_techattr-tech_name."gw_attrib.
gw_fcat-no_out = 'X'.
MODIFY gt_fcat2 FROM gw_fcat TRANSPORTING no_out.
ENDIF.
ENDLOOP.
lcl_main=>create_dynamicalv( ).
lcl_main=>merge_tables( ).
CLEAR gw_cond.
READ TABLE gt_techattr INTO gw_techattr INDEX 1.
* CONCATENATE 'MBR_NAME =' '<Gfs_field>' INTO Gw_cond
* SEPARATED BY space.
TRANSLATE gw_techattr-tech_name TO UPPER CASE.
CONCATENATE `'` gw_techattr-tech_name `'`
'=' '<Gfs_field>' INTO gw_cond
SEPARATED BY space.
CHECK NOT <gfs_t_final> IS INITIAL.
SORT <gfs_t_final> BY (gw_techattr-tech_name).
LOOP AT <gfs_tab3> ASSIGNING <gfs_w_tab3>.
ASSIGN COMPONENT 'MBR_NAME' OF STRUCTURE <gfs_w_tab3>
TO <gfs_field>.
IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
DELETE <gfs_t_final> WHERE (gw_cond).
ENDIF.
IF <gfs_t_final> IS INITIAL.
EXIT.
ENDIF.
ENDLOOP.
*adding attribute description
DATA gw_cond1 TYPE string.
DATA gw_cond2 TYPE string.
CLEAR gw_cond1.
CONCATENATE `'` gw_techattr-tech_name `'` 'eq' '<gfs_field>'
INTO gw_cond1 SEPARATED BY space.
CLEAR gw_cond2.
CONCATENATE 'TXTLG1' 'eq' 'SPACE'
INTO gw_cond2 SEPARATED BY space.
CLEAR gw_cond.
CONCATENATE 'TXTLG' 'NE' 'SPACE' INTO gw_cond SEPARATED BY
space.
gw_sortcond = 'TXTLG'.
SORT <gfs_tab4> BY (gw_sortcond).
LOOP AT <gfs_t_final> ASSIGNING <gfs_final> WHERE
(gw_cond2).
ASSIGN COMPONENT gw_techattr-tech_name OF STRUCTURE
<gfs_final> TO <gfs_field>.
IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
ASSIGN COMPONENT 'TXTLG1' OF STRUCTURE
<gfs_final> TO <gfs_field4>.
IF sy-subrc EQ 0 AND <gfs_field4> IS ASSIGNED.
LOOP AT <gfs_tab4> ASSIGNING <gfs_attr>
WHERE (gw_cond).
ASSIGN COMPONENT 2 OF STRUCTURE <gfs_attr> TO
<gfs_field2>.
IF sy-subrc EQ 0 AND <gfs_field2> IS ASSIGNED.
ASSIGN COMPONENT 5 OF STRUCTURE <gfs_attr>
TO <gfs_field3>.
IF sy-subrc EQ 0 AND <gfs_field3> IS ASSIGNED.
IF <gfs_field> EQ <gfs_field2>.
<gfs_field4> = <gfs_field3>.
MODIFY <gfs_t_final> FROM <gfs_final>
TRANSPORTING ('TXTLG1') WHERE (gw_cond1).
EXIT.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDLOOP.
* LOOP AT <gfs_tab4> ASSIGNING <gfs_attr> WHERE (gw_cond) .
* ASSIGN COMPONENT 2 OF STRUCTURE <gfs_attr> TO
* <gfs_field2>.
* IF sy-subrc EQ 0 AND <gfs_field2> IS ASSIGNED.
* ASSIGN COMPONENT 5 OF STRUCTURE <gfs_attr> TO
* <gfs_field3>.
* IF sy-subrc EQ 0 AND <gfs_field3> IS ASSIGNED.
* LOOP AT <gfs_t_final> ASSIGNING <gfs_final>
* WHERE (gw_cond2).
* ASSIGN COMPONENT gw_techattr-tech_name OF STRUCTURE
* <gfs_final> TO <gfs_field>.
* IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
* ASSIGN COMPONENT 'TXTLG1' OF STRUCTURE <gfs_final>
* TO <gfs_field4>.
* IF sy-subrc EQ 0 AND <gfs_field4> IS ASSIGNED.
* IF <gfs_field> EQ <gfs_field2>.
* <gfs_field4> = <gfs_field3>.
* MODIFY <gfs_t_final> FROM <gfs_final>
* TRANSPORTING ('TXTLG1') WHERE (gw_cond1).
* EXIT.
* ENDIF.
* ENDIF.
* ENDIF.
* ENDLOOP.
* ENDIF.
* ENDIF.
* ENDLOOP.
IF <gfs_t_final> IS NOT INITIAL.
CALL SCREEN 9000.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDMETHOD. "create_alv3
METHOD create_alv2.
READ TABLE gt_techattr INTO gw_techattr INDEX 1.
CONCATENATE gw_techattr-tech_name 'EQ' 'space' INTO gw_cond
SEPARATED
BY
space.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_datatbl).
ASSIGN gr_r_ref->* TO <gfs_tab1>.
SELECT *
INTO TABLE <gfs_tab1>
FROM (gw_datatbl) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND mbr_name IN s_member
AND /cpmb/calc EQ 'N'
AND (gw_cond).
IF sy-subrc EQ 0.
IF p_hir IS NOT INITIAL.
CLEAR gw_hircond.
CONCATENATE '/CPMB/HIR' 'NE' 'P_HIR' INTO gw_hircond
SEPARATED BY space.
DELETE <gfs_tab1> WHERE (gw_hircond).
ENDIF.
CLEAR: gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_descrptbl).
ASSIGN gr_r_ref->* TO <gfs_tab2>.
SELECT *
FROM (gw_descrptbl) CLIENT SPECIFIED
INTO TABLE <gfs_tab2>
WHERE mandt EQ sy-mandt
AND langu EQ sy-langu.
IF sy-subrc EQ 0.
lcl_main=>create_fieldcatalog( ).
gt_fcat2_t[] = gt_fcat2[].
DELETE gt_fcat2 WHERE fieldname NE 'TXTLG'.
APPEND LINES OF gt_fcat1 TO gt_fcat2.
SORT gt_fcat2 BY fieldname.
LOOP AT gt_fcat2 INTO gw_fcat.
READ TABLE gt_attr INTO gw_attr WITH KEY
tech_name = gw_fcat-fieldname.
IF sy-subrc EQ 0.
gw_fcat-reptext = gw_attr-caption.
ENDIF.
IF gw_fcat-fieldname = 'TXTLG'.
gw_fcat-outputlen = 60.
ENDIF.
MODIFY gt_fcat2 FROM gw_fcat TRANSPORTING outputlen reptext.
* READ TABLE gt_attrib INTO gw_attrib INDEX 1.
* IF sy-subrc EQ 0.
IF gw_fcat-fieldname NE 'MBR_NAME'
AND gw_fcat-fieldname NE 'TXTLG'
AND gw_fcat-fieldname NE gw_techattr-tech_name."gw_attrib.
gw_fcat-no_out = 'X'.
MODIFY gt_fcat2 FROM gw_fcat TRANSPORTING no_out.
ENDIF.
* ENDIF.
ENDLOOP.
lcl_main=>create_dynamicalv( ).
lcl_main=>merge_tables( ).
CHECK NOT <gfs_t_final> IS INITIAL.
SORT <gfs_t_final> BY ('MBR_NAME').
CALL SCREEN 9000.
ENDIF.
ENDIF.
ENDMETHOD. "create_alv2
METHOD create_alv1.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_datatbl).
ASSIGN gr_r_ref->* TO <gfs_tab1>.
SELECT *
FROM (gw_datatbl) CLIENT SPECIFIED
INTO TABLE <gfs_tab1>
WHERE mandt EQ sy-mandt
AND mbr_name IN s_member.
IF sy-subrc EQ 0.
IF p_hir IS NOT INITIAL.
CLEAR gw_hircond.
CONCATENATE '/CPMB/HIR' 'NE' 'P_HIR'
INTO gw_hircond SEPARATED BY
space.
DELETE <gfs_tab1> WHERE (gw_hircond).
ENDIF.
CLEAR: gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_descrptbl).
ASSIGN gr_r_ref->* TO <gfs_tab2>.
SELECT *
FROM (gw_descrptbl) CLIENT SPECIFIED
INTO TABLE <gfs_tab2>
WHERE mandt EQ sy-mandt
AND langu EQ sy-langu.
IF sy-subrc EQ 0.
lcl_main=>create_fieldcatalog( ).
SORT gt_fcat2 BY col_pos fieldname.
gt_fcat2_t[] = gt_fcat2[].
DELETE gt_fcat2 WHERE fieldname NE 'TXTLG'.
APPEND LINES OF gt_fcat1 TO gt_fcat2.
SORT gt_fcat2 BY fieldname.
SORT gt_attr BY tech_name.
LOOP AT gt_fcat2 INTO gw_fcat .
IF gw_fcat-reptext IS INITIAL.
READ TABLE gt_attr INTO gw_attr
WITH KEY tech_name = gw_fcat-fieldname BINARY SEARCH.
IF sy-subrc EQ 0.
gw_fcat-reptext = gw_attr-caption.
ELSE.
gw_fcat-reptext = gw_fcat-fieldname.
ENDIF.
ENDIF.
IF gw_fcat-fieldname EQ 'OBJVERS'.
gw_fcat-no_out = 'X'.
ELSEIF gw_fcat-fieldname EQ 'ROWFLAG'.
gw_fcat-no_out = 'X'.
ELSEIF gw_fcat-fieldname EQ 'MBR_NAME'.
gw_fcat-no_out = 'X'.
ELSEIF gw_fcat-fieldname EQ '/CPMB/CALC'.
gw_fcat-no_out = 'X'.
ELSEIF gw_fcat-fieldname EQ 'TXTLG'.
gw_fcat-outputlen = 70.
ELSEIF gw_fcat-fieldname EQ '/CPMB/HIR'.
gw_fcat-outputlen = 20.
ENDIF.
MODIFY gt_fcat2 FROM gw_fcat
TRANSPORTING reptext no_out outputlen.
ENDLOOP.
lcl_main=>create_dynamicalv( ).
lcl_main=>merge_tables( ).
CHECK NOT <gfs_t_final> IS INITIAL.
* SORT <gfs_t_final> BY ('TXTLG').
CALL SCREEN 9000.
ENDIF.
ENDIF.
ENDMETHOD. "show_alv1
METHOD show_alv1.
IF go_custom_container IS INITIAL.
CREATE OBJECT go_custom_container
EXPORTING
* parent =
container_name = gw_g_container
* style =
* lifetime = lifetime_default
* repid =
* dynnr =
* no_autodef_progid_dynnr =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_grid1
EXPORTING
* i_shellstyle = 0
* i_lifetime =
i_parent = go_custom_container
* i_appl_events = 'X'
* i_parentdbg =
* i_applogparent =
* i_graphicsparent =
* i_name =
* i_fcat_complete = SPACE
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_grid1->set_table_for_first_display "#EC CI_SUBRC
* EXPORTING
* i_buffer_active =
* i_bypassing_buffer =
* i_consistency_check =
* i_structure_name =
* is_variant =
* i_save = 'X'
** i_default = 'X'
* is_layout =
** is_print =
** it_special_groups =
* it_toolbar_excluding =
* it_hyperlink =
* it_alv_graphics =
* it_except_qinfo =
* ir_salv_adapter =
CHANGING
it_outtab = <gfs_t_final>
it_fieldcatalog = gt_fcat2
* it_sort =
* it_filter =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDIF.
ENDMETHOD. "SHOW_alv1
ENDCLASS. "lcl_main IMPLEMENTATION
AT SELECTION-SCREEN OUTPUT.
IF p_radio1 EQ 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'M1'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
* IF screen-group1 = 'M'.
* screen-active = 0.
* MODIFY SCREEN.
* ENDIF.
ENDLOOP.
ENDIF.
* IF p_radio2 EQ 'X'.
* LOOP AT SCREEN.
* IF p_reason EQ 30.
* IF screen-group1 = 'M2'.
* screen-active = 0.
* MODIFY SCREEN.
* ENDIF.
* ENDIF.
* ENDLOOP.
* ENDIF.
START-OF-SELECTION.
IF p_radio1 EQ 'X'.
SELECT SINGLE data_table desc_table
INTO (gw_datatbl , gw_descrptbl)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
SELECT appset_id dimension tech_name attribute_name caption
INTO TABLE gt_attr
FROM uja_dim_attr CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
lcl_main=>create_alv1( ).
ENDIF.
ENDIF.
ELSE.
IF p_reason NE 30.
SELECT *
INTO TABLE gt_except
FROM zbpcbt007 CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim
AND reasoncd EQ p_reason.
IF sy-subrc EQ 0.
SELECT SINGLE data_table desc_table
INTO (gw_datatbl,gw_descrptbl)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
SELECT appset_id dimension tech_name attribute_name caption
INTO TABLE gt_attr
FROM uja_dim_attr CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
gt_except_t[] = gt_except[].
SORT gt_except_t.
DELETE ADJACENT DUPLICATES FROM gt_except_t.
IF gt_except_t IS NOT INITIAL.
SELECT tech_name
INTO TABLE gt_techattr
FROM uja_dim_attr CLIENT SPECIFIED
FOR ALL ENTRIES IN gt_except_t
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim
AND attribute_name EQ gt_except_t-attrib.
IF sy-subrc EQ 0.
lcl_main=>create_alv2( ).
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ELSEIF p_reason EQ 30.
SELECT SINGLE data_table desc_table
INTO (gw_datatbl,gw_descrptbl)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
* gt_except_t[] = gt_except[].
* SORT gt_except_t BY attrib.
* DELETE ADJACENT DUPLICATES FROM gt_except_t COMPARING attrib.
* IF gt_except_t IS NOT INITIAL.
SELECT refdimension
INTO TABLE gt_refdim
FROM zbpcbt009 CLIENT SPECIFIED
* FOR ALL ENTRIES IN gt_except_t
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim
AND attrib EQ p_attr."gt_except_t-attrib.
IF sy-subrc EQ 0.
gt_refdim_t[] = gt_refdim[].
SORT gt_refdim_t BY dimension.
DELETE ADJACENT DUPLICATES FROM gt_refdim_t COMPARING
dimension.
IF gt_refdim_t IS NOT INITIAL.
SELECT data_table desc_table
INTO TABLE gt_refdata
FROM uja_dimension CLIENT SPECIFIED
FOR ALL ENTRIES IN gt_refdim_t
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ gt_refdim_t-dimension.
IF sy-subrc EQ 0.
SELECT appset_id dimension tech_name attribute_name
caption
INTO TABLE gt_attr
FROM uja_dim_attr CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
SELECT tech_name
INTO TABLE gt_techattr
FROM uja_dim_attr CLIENT SPECIFIED
* FOR ALL ENTRIES IN gt_except_t
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim
AND attribute_name EQ p_attr."gt_except_t-attrib.
IF sy-subrc EQ 0.
REFRESH: gt_refdim_t.",gt_except_t.
lcl_main=>create_alv3( ).
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
* ENDIF.
* ENDIF.
ENDIF.
ENDIF.
*& Module SHOW_ALV1 OUTPUT
*&-------Yes you can, although you need to do it slightly differently, depending on what your 'original' form is doing.
You end up having to do two things:
1. In your second tabular form, you need to explicitly identify the relevant form fields using calls to the relevant APEX_ITEM functions - as well as this, you need to 'manually' specify the array number in the arguments for the function call, ensuring it doesn't overlap with your original form. Normally, this aspect is done for you.
2. Create your own custom CRUD processes, referencing the above elements. There are a few threads floating around the forum relating to how to deal with this. Do a search for "APEX_APPLICATION.G_F" or "HTMLDB_APPLICATION.G_F" for pointers.
Happy hunting! -
Multiple Lines in a Single ALV Grid Cell
Is there any way to Display Multiple Lines in a Single ALV Grid Cell.
This can be accomplished by Sorting the First 3 fields and Make it Looks like below displayed format.
But My problem is while downloading also it should be Displayed in the same format.
All inputs are highly appreciated.there was a post similar to this some days back... search it..
any ways...
what u can do is...
arrange ur final internal table so that it will look like same line...
like...lets say ur internal table is :
A1 B1 C1 D1 123
A1 B1 C2 D2 123
A1 B2 C1 D1 123
A1 B2 C2 D2 123
and u can rearrange ur table to be like
A1 B1 C1 D1 123
C2 D2 123
A1 B2 C1 D1 123
C2 D2 123
what i mean to say is dont pass the fields if they are same in the previous line... try it out..
and then pass it two ur ALV.
it will look like they are in one line
Edited by: soumya prakash mishra on Jun 17, 2009 1:31 PM -
How to allow multiple values in a single blank cell in WebI report
Hi
I am working in BO XIR2. I have a scenario as follows.
In a single cell (blank cell from template) i need to display multiple contact persons. When I drag the contact person name into the blank cell, I am getting an error: MULTIVALUE). Please let me know how to use a function so that I can show two or three contact person names in a single blank cell.
I tried to use Replace and Char function as follows to bring Carriage Return functionality to the cell.
Replace([Contact Person]; ";" ; Char(13)) but this did not work.
Thanks in Advance.BOUser11:
I know this thread has been answered. I recently came across a scenario where I happen to populate multiple values in a single blank cell(from templates). But the only catch being that if user enters multiple values for a prompt you can show them in a single cell eg: =UserResponse("Enter value(s) for Branch:"). would be the formula for the blank cell. Afetr the user selects three values say A, B,C, webi puts it in the format of A;B;C. in a single cell.
In your case try giving that as a prompt to the user or answer that multi prompt some how and when u use the above formula it should suffice your requirement.
Let me know if you have tried.
Thanks,
karthik -
How to find multiple keys in single cell using Numbers?
I'm trying to add functionality to one of my Numbers tables where want to check a single cell for multiple keywords from a list. The hole thing works perfectly fine in Excel but it behaves differently in Numbers.
The formula I am using is:
=IF(ISERROR(LOOKUP(2^15;FIND($E$2:$E$11;A2)));"not found";"found")
The following screenshots show that it correctly finds the keys in the cell when using Excel but not in Numbers. Although, it seems to work if the key is in the same row as the input cell.
Excel table using the formula I posted in the C column:
Numbers table using the formula I posted in the C column:
Would be really happy if somebody knows how I could accomplish that!
Cheers,
MaikIf you are working in Numbers you can do this efficiently with a small AppleScript without going back to Excel or clone. One click and you get the following result:
This script works with Numbers 2.3, which your screenshot suggests you are using. If you are using Numbers 3 it needs a very small adjustment.
This is the script:
--https://discussions.apple.com/thread/6315365?tstart=30
property inputCol : 1 --> col A, as in example
property resultCol : 3 --> col C, as in example
property keysCol : 5 --> col E, as in example
property targDoc : 1 --> 1 is front document; can change to "MyDocName"
property targSheet : 1 --> 1 is first sheet; can change to "MySheetName"
property targTable : 1 --> 1 is first table; can change to "MyTableName"
tell application "Numbers"
set t to document targDoc's sheet targSheet's table targTable
set keysList to t's column keysCol's cells's value
repeat with i from 2 to t's row count -- assumes 1 Header Row
set inputVal to t's row i's cell inputCol's value
if inputVal is not 0 then --skip blank cells; Numbers 2 reads blanks as 0
--check if Input matches a key:
if inputVal is in keysList then
set t's row i's cell resultCol's value to "found"
else
set t's row i's cell resultCol's value to "not found"
end if
--check if Input contains a key:
repeat with aKey in keysList
if inputVal contains aKey then set t's row i's cell resultCol's value to "found"
end repeat
end if
end repeat
end tell
--end of script
To run, copy into AppleScript Editor, change the properties if needed, and click the green triangle 'Run' botton.
SG -
Populate multiple rows and columns based off of a single cell
Does anyone know a way to populate multiple rows and columns based off of the input of a single cell. I'm trying to create a workout tracker that auto populates from a master list of workouts. Example, in A2 the user selects the workout from a drop down menu (St1, St2, St3, etc) and the workout is pulled from the master list and is populated into B2:C5.
I'm using =LOOKUP(A2,Master :: A2:A32,Master :: C2:C32) right now, but it's only drawing the top column. I'm looking for an edit for the formula (or completely new formula) that will place the info from the 1st column of the Master table into the 1st column of the Auto Tracker 1 table and then on down until the 4th column.
Here is a screen shot of what I have now:
And an example of what I'd like to accomplish:
Any and all help is appreciated, and please let me know if there is any more info that I can give that'd help out.Hi Mike,
Your screenshots show that you have merged some cells in Column A of both tables. That may be the reason why the LOOKUP function is having trouble working out which range of cells to examine.
Hope this helps.
Regards,
Ian. -
Displaying multiple dynamic html pages within a single Portal folder.
Hi all,
Question: How can I display multiple dynamic html pages that are linked to each other, within a single portal folder?
History:
I have a designer/web server application (PL/SQL packakges) on Oracle
8.1.7. Early in the development process we built it into WebDB2.2 and
used folders on the left side as a navigation bar and the contents of my packages on the right side. This was easy, WebDB used Frames.
Unfortunatley I could never automatically display a PL/SQL item in the folder area.
Now I need to integrate the application into Portal 3.0 not the early adopters version, the one with 9iAS (NT for now, Unix later). I have a page/content area divided into regions and a navigation portlet on the left side containing links to PL/SQL folders whose contents are displayed on the right side. On the right side I have (for example) a Queryview. When I click on any of the buttons (i.e. Find, New), I land in a new page outside of my portal folder. This page contains a dynamically built list (from one or more DB Tables) and of course the first column contains a list of links that bring you to the individual item. How do I set my links or configure my folder to display
within the portal folder area?Hi,
One alternate is, increase the size of your screen, for this go to the layout of your screen and increase it as much you want, and also the custom container size, so that no scroll bar will appear at least.
Other solution would be, as you said ALVs will be dynamical, it will be good to create buttons, or links on the screen based on the no of ALVs dynamically and on click of corresponding button call the corresponding ALV.
But i dont think this will serve, first check the first option.
Hope this helps u.,
Thanks & Regards,
Kiran. -
Inserting titles between multiple dynamic EPM reports
Hi,
I am currently working on some templates where there are multiple dynamic EPM reports with shared column dimensions and multiple dimensions in the rows. I am using EPM Add-in SP21 patch 1.
We would like to have a section title appearing between the reports, I have tried a number of methods but have not found a solution that produces quality results.
Methods tried:
1. A local member on the row inserted at the start of the second report. The local member text appears in the right most row dimension column which is not the right place for a title. Also the titles for the dimension rows are not copied.
2. Insert a dummy member and override the member name. There are a couple of problems with this method, subsequent dimension ID's are populated and local members are also applied to this member.
3. EPMInsertCellsBeforeAfterBlock. I only managed to get this to copy a single cell into the data columns, not the row dimension columns.
4. Use VBA to add a title. The API GetDataTopLeftCell will return the starting position of data in a specific report. This can then be used to insert text into the previous line as a title. The disadvantage here is that VBA is being used but it can be used to produce the required results though you need to handle formatting and any password protection within the VBA.
I imagine that this is quite a common requirement. Ideally I would like to solve this without resorting to VBA or some exotic workaround.
Any suggestions appreciated.
Cheers,
MarkDear Vadim
I want results similar to what I have achieved using VBA. Where I have one row for column titles, which I am copying using Excel formulas, these should appear on every column including the dimension columns. On the row above this should be a subsection title, in this example this is "Bezüger"
The screen shots contain two reports, one below the other with shared column axis. The second report has been shifted down by a couple of rows to introduce a break between the reports.
Using VBA I inserted titles onto two rows, with a section title above a repeat of the original column header.
The best that I have achieved using local members resulted in a title being on the right most column, and there being no way to put title column header above the dimension columns.
I have played around with all the options for the local member but find no way to make the title appear in the left most column.
In this screen shot, the local member is disabled, because I have replaced it with the VBA solution.
I hope that the updated screen shots make this clearer to you.
Regards,
Mark -
Selecting data from Multiple Partitions in a single select stmt.
Hi all,
My Database is very large & my tables are partitioned.
My question is:
1) If my data is spread across multiple partitions, is there any way to select data from multiple partitions in a single query?
If we dont mention partition name also it works fine, but perofmance wise it will be very slow. (Using EXPLAIN PLAN)
(Note:I dont want to make use of Union concept, i want to do it in a single select statement)
For ex:
qry1.sql:
select empno from emp_trans partition (P012000)
This above query(qry1.sql) will work fine.
qry2.sql:
select empno from emp_trans partition (P012000,P022000)
The above query(qry2.sql) will return will return the following error:
ORA-00933: SQL command not properly ended
If anybody has any solution for this, pls mail me immediately.
Thanks in advance
bye
nullAll my queries are dynamically generated. All my tables are also indexed partition wise based on date field. My question is, if i want to mention multiple partition names at the time of generating my query(select), then with parformance will be good. I have refered some books, inthat what they say is to use UNION concept, i dont want to use that, instead i want in a single select statement.
Thaks for ur reply
Bye
null -
How to set multiple styles on a single component in flex ?
Hi ,
I would like to know how to set multiple styles on a single component in flex.
Can anyone give me an example as to how to set multiple styles for a single component ?
Thanks ,
Regards,
AjanthaHi tuliptaurus,
You can setStyleName property for chnaging the external css dynamically by using the setStyle() method ...
btn.setStyle("styleName","blendButtonSkinOther");
You can change the external css by using the styleaName property with setStyle method..the line in blue..where blendButtonSkinOther is another css class..
blendButtonSkin {
fontFamily: Arial;
fontSize: 11;
color: #F1F1F1;
textRollOverColor: #F1F1F1;
textSelectedColor: #F1F1F1;
horizontal-align:center;
width:150;
height:30;
cornerRadius:5;
upSkin:ClassReference('assets.skins.BlendButtonSkin');
downSkin:ClassReference('assets.skins.BlendButtonSkin');
overSkin:ClassReference('assets.skins.BlendButtonSkin');
disabledSkin:ClassReference('assets.skins.BlendButtonSkin');
selected-up-skin: ClassReference('assets.skins.BlendButtonSkin');
selected-down-skin: ClassReference('assets.skins.BlendButtonSkin');
selected-over-skin: ClassReference('assets.skins.BlendButtonSkin');
blendButtonSkinOther {
fontFamily: Arial;
fontSize: 11;
color: #F1F1F1;
textRollOverColor: #F1F1F1;
textSelectedColor: #F1F1F1;
horizontal-align:center;
width:150;
height:30;
cornerRadius:5;
upSkin:ClassReference('assets.skins.BlendButtonSkin');
downSkin:ClassReference('assets.skins.BlendButtonSkin');
overSkin:ClassReference('assets.skins.BlendButtonSkin');
disabledSkin:ClassReference('assets.skins.BlendButtonSkin');
selected-up-skin: ClassReference('assets.skins.BlendButtonSkin');
selected-down-skin: ClassReference('assets.skins.BlendButtonSkin');
selected-over-skin: ClassReference('assets.skins.BlendButtonSkin');
Thanks,
Bhasker Chari
Maybe you are looking for
-
My firewire connection to the hard drive is no longer recognized
My external hard drive with firewire cable connection to the imac has been working fine for months. Suddenly got error message that firewire devices were not being recognized by the computer. I tried poweriing dowm computer and external drive and res
-
Hey all, I was just wondering is there a way to display a phone number with the 0 at the beginning of the number. This isn't a requirement, but I would like to. Would help the user. I have already made the tables and inserted the data. I have searche
-
Can I use Bridge to view files in Google Drive?
Is there any way to use Bridge to view files that are in a shared Google Drive folder?
-
Error 'Address doesn't exist '
Hi guys I am getting an error while running the background job for delivery duelist standard report RVV50R10C with some variant this program is being run from last few months but i got this type of error first time the error is shown in job log as
-
Suppressing Office 2010 Activation at First Launch
Hi, I'm trying to create a silent deployment package for Office 2010 using the Office Customisation Tool. It works well, apart from one thing - after the installation has completed and the product is launched the user is prompted for activation. I