Multiple engines on the same system

hi,
Can anyone tell me how i can setup multiple j2ee engine instances on the same system. I know that this is possible if the instances are from different releases. I currently want to install multiple 710 AP 7 instances on a system. But it dosent work . I am assuming it is because the servers listen on the same port.
Does anyone have a solution to this?
Regards,
anoop

Hi,
Create multiple instances as follows,
1. Select NetWeaver'04 Java System(J2EE Only)
2. <DB>->Central System ->Custom Installation
Use different SystemID while giving input parameters.
You can have multiple instances on the same
application server,
http://help.sap.com/saphelp_erp2005/helpdata/en/c4/3a5e90505211d189550000e829fbbd/frameset.htm
Srinivasan T
Helpful answer=>points

Similar Messages

SAP GRC 10 : Can we connect GRC to multiple clients within the same system

We are having this requirement to connect SAP GRC to two different clients within the QA System.
Just wondering whether this is possible to connect at the same time. We have created connectors in both the clients in ECC and in GRC we have connectors for both ECC Cllients. When I try to add the connector for second client in SPRO , it is not even showing up entry for that
Please confirm whether we can do this

Hi Anil
If you have two ECC clients you would create two connectors to GRC. You would need two SM59 RFC connections (one for each client) to map them through.You can map them to the same logical group though.
What is not working for you? Did you define both clients as their own connectors?
Regards
Colleen

Multiple instances of ColdFusion Builder on the same system?

Hi Folks,
Four of us work remotely in my company. It is not uncommon for us to all remote desktop into a system reserved for our use and three of us be using CFEclipse at the same time. We recently installed ColdFusion Builder on this system and found that it would only allow one instance of ColdFusion Builder to run. When attempting to start a second instance CFBuilder would show the flash screen and then nothing more.
Is anyone aware of workarounds or other changes that will enable us to run multiple instances of CFBuilder on the same system?
Thanks in advance,
Thomas Woestman

Will look into this issue.
But for now as a workaround, whenever you want to launch CF Builder if there is .bolt file please delete the .bolt it from
C:\Program Files\Adobe\Adobe ColdFusion Builder\ . And you will be able to launch it even while other has kept it open.
Thanks,
Krishna

How to carry out multiple searches on the same engine simultaneously.

As mentioned above. I'm looking for a way to search multiple text at the same time.

Can you give a more detailed example of what you mean?
For example:
* Do you want to type query #1 into the search box or address bar and open it in results tab #1, then type query #2 into the search box or address bar and open it in results tab #2? To do that, hold down the Alt key when pressing Enter or hold down the Ctrl key when clicking the icon that submits your search.
* Do you want to combine numerous queries into a single request to Google and get the results all mixed together? You can use OR (must be in capital letters) with quotation marks or parentheses for grouping. For example: Android OR ios OR "windows phone"
* Something else?

Multiple agentry servers installed in the same system?

Hello Experts,
There are two agentry servers installed in the same system,but in different drives(C and D drive).I have given access to one server remotely,in the sense the applications to the server in one drive are published by other developers who are connecting to the server through network. In the other drive server iam publishing the applications developed locally.But after deployment,when i connect to the server to retrieve definitions,iam getting the latest application published.
Is this situation possible,because when we connect to the server we are using ip address of the system where the server is installed,if both the servers are running in different drives,then which server application will be deployed,Is there any possibility to connect to the server instances(in my system two server instances),so that the application that is deployed to individual servers can be retrieved?
Thanks in advance
Regards,
Sravanthi
Message was edited by: Michael Appleby

Hi Sravanthi,
I do not believe that you can run two Agentry Servers on the same hardware without making other changes (like running them on SMP 2.3). I would suggest that you look into the documentation for SMP 2.3 as your best solution at this time. Hopefully some more savvy Agentry folks will chime in with a more detailed response.
Regards, Mike
SAP Customer Experience Group - CEG
Message was edited by: Michael Appleby

Sharing one iTunes library across multiple accounts on the same Mac

Hello, I've poked around at some of the posts dealing with sharing one iTunes music library across multiple accounts on the same Mac but it seems like this can only be done if the libary is moved to a shared folder. I realize this can be done but I was trying to share it the way it is described in a post on Apple support (See link below.). That post seemed to imply that you don't have to move the library from its original location (owned by account A, e.g.), rather just make a couple preference changes in the accounts, use fast user switching and voila. That doesn't seem to work. So my question is this: Is the only way to share one iTunes music library across multiple accounts on the same Mac to move it to a shared folder? I'm running 10.4.8 on an Intel iMac. Thanks in advance!
http://docs.info.apple.com/article.html?artnum=93195

After reading this and several other related threads, I am becoming thoroughly confused about all of this. I have a situation similar to the one that pokerpal described in the post dated January 7 at 8:06 pm, except that the music files on my system are located on an external hard drive. Everything else is pretty much the same though - I am the admin user (and the main iTunes user and maintainer) and my girlfriend is a standard user who has no music in her own iTunes library. She can see and listen to and make playlists from and sync her iPod with the music in this library from her account, and I can do the same thing, independent of her, from my account. And if I make a change to information within a song, she doesn't see it, and vice versa, and I understand that. What I don't understand is why when I add a song or an album to the music files by importing a CD or downloading something from the iTunes Music Store, she has no way of knowing that unless I tell her, and then she can add it to her library by using the "Add to Library" function. Is there no way of automatically updating her library files to add the new song(s)? We have almost 15,000 songs and videos in that library, and I don't even want to think about what might have to happen if the answer to my question is "no." Interestingly enough, if I put an update to a Word document in the same exact location (on the hard drive), we can update that and pass it back and forth all day - why is that such a difficult task for iTunes to accomplish?
Sorry I went on so long, but this has been building up for some time, and none of the solutions I've read about here have really been of any help, so I'm a bit frustrated and, as I said at the beginning, confused.
iMac G5, MacBook Mac OS X (10.4.8)

Multiple DEVL_PROJECT_ID for the same model in CZ_DEVL_PROJECTS Table.

Hi,
Did anyone came across this issue!! I am triggering the config engine from back and and trying to pick up a model but it has multiple devl_project_id's. :(
I could see multiple DEVL_PROJECT_ID for the same model in CZ_DEVL_PROJECTS Table. Apart from DEVL_PROJECT_ID and created_by_date every thing looks the same.
Below are the 2 records the data from the table
select * from CZ.CZ_DEVL_PROJECTS where product_key = '122:17056' and DEVL_PROJECT_ID in (12943,15321)
DEVL_PROJECT_ID     NAME     ORIG_SYS_REF     CREATION_DATE     LAST_UPDATE_DATE     PERSISTENT_PROJECT_ID     MODEL_TYPE
12943     ASI XXX MODEL(122 17056)     OPTIONAL:122:17056     12/18/2012 10:01     12/18/2012 10:01     11100     A
PRODUCT_KEY     ORGANIZATION_ID     INVENTORY_ITEM_ID     BOM_CAPTION_RULE_ID     NONBOM_CAPTION_RULE_ID
122:17056     122     17056     802     801
15321     ASI XXX MODEL(122 17056)     OPTIONAL:122:17056     12/26/2012 23:10     12/26/2012 23:10     11100     A
122:17056     122     17056     802     801
Thanks in advance,
-vijay

It can be possible to have multiple devl_project_id for the same model in cz_devl_projects Table.
Case -1 : When you delete the existing model and re-import again.
case 2:
When you publish the model locally, it will create the same copy of the record with different devl_project_id, creation_date, last update_date etc..\
You can see that for published records the last_updat_login, checkout_user will be null and for the original model, last_update_login,checkout_user (if model is locked) will not be null.
-Murali
Edited by: 907569 on Jan 8, 2013 10:55 AM

Lightroom CC issues with multiple export at the same time

Back before Lightroom updated to the CC version, I was able to use export presets to send 4 different versions of the photos I'm working on at the same time (A Full Size for client at certain size, full size for myself, web-sized with watermark and a thumbnail). Since updating to the CC version, I'm only able to start the export process on two of these versions before the system simply becomes crippled and I cannot even navigate through Lightroom without it chugging along.
For reference, I'm running a 2014 rMBP with 16GB of RAM, LR is the only app open at the time and it's showing that I have roughly 6GB of RAM free when attempting this export.
TL;DR: LR5 worked wiht multiple exports at the same time, but LRCC now chugs after 2 exports are started

Re: "Selecting video in Messages, now starts Face time for video. Face time is one to one only."
Apple "Messages" supports two different types of video conferencing. It's become more than a little confusing. If you (or the person on the other end) ONLY have accounts set up for Apple's "iMessage" service (associated with your Apple ID and "iCloud") you may see the video symbol, but when you click on it you will be connected via FaceTime which is limited a 1-to-1 video conference.
However, if you have set up an AIM account in Messages (you may already have an AIM account ID if you once used iChat for video, audio and screensharing) and the person at the other end also has an AIM account you will be connected via AIM and will be able to do screen sharing and multi-person video conferences just like the old iChat, i.e. you'll have iChat Theater features, up to 4-way conferencing, etc.
It can get very confusing if, for example, you've signed up for AIM using a .me or .cloud email address. But once you have it set up and learn to recognise the way Messages switches between AIM and iMessage all the old iChat features work just fine in Messages.

Can I run the currency translation for multiple years at the same time?

Dear Friends,
I set up currency translation on our BPC NW 7.0 system and it is working fine ONLY if I run it for any one year at a time. But if I select multiple years in the data package (FX Restatment) selection it only calculates for the first year in that selection.
say if I run the data package for years: 2009, 2010, 2011, 2012, it only performs currency translation for the year 2009.
Can I run the currency translation for multiple years at the same time ?
Note: The year is determined from the YEAR property of the "Time" dimension
appreciate any inputs,
thanks

You can run currency translation for multiple years.
I think the problem it is actually related to how you are sending the parameter to currency translation script.
Just review the script logic log and you will see with what parameters was called currency translation FXTrans.
My expectation is that actually the script is called just with first year and that's the problem.
Log of script logic you can find it into:
C:\BPC|DATA\Webfolder\YourAppset\YourApplication\Private Publications\Users used to run logic\Temp
Regards
Sorin Radulescu

What's the problem with having multiple users with the same UID?

I've got three edit systems connected to the SAN using open directory off our server.
I want all edit systems to have read/write access to everything created. I don't need to protect anything from any of the systems. With all three systems logged on using the same user, I never have to change permissions.
The other cool thing about this is that Final Cut Pro will let me know if someone else is modifying a project that I have open with the warning:
“The project "projectName" has been modified externally. If another user is working on it, saving will overwrite their changes. Do you still want to save?”
This sounds great, right?
RED FLAG!!!! Apple gives the warning in this article:
http://docs.info.apple.com/article.html?artnum=302450
"You should not allow two users with the same UID to access an Xsan volume at the same time."
So why is it bad to have two (or more) users with the same UID?
I can see that in some situations it means that you can't prevent people from read/write privileges. But I don't want to restrict privileges.
What am I missing? With all of these warnings, it seems like if I do this my edit systems could all explode or something. Please help me understand the potential ramifications of having three users have the same UID.

Hi Russell,
1) If you have OD set up and "editor" has UID 1111, then when they log in to any machine that's bound to OD as editor, they will get UID 1111. Therefore, there won't be any of these permission errors. This is typically the recommended approach.
2) I assume you mean "You'd prefer to not using open directory?" Whatever the case, OD isn't mandatory with Xsan -- it's just that with multiple user accounts, managing them centrally tends to be easier. For 3 or 4 accounts and 3 or 4 machines maybe it's no big deal. If you go larger, it could get a lot more complicated. That said, if you set it up such that each machine has the exact same set of users (as you said, Mary = UID 502, Fred = UID 503, William = UID 504), then you can do what you want. Mary can log in from multiple machines at the same time, and in general you won't have permissions problems. Of course, if you try and read and write the same file from multiple workstations at the same time, you will get file locking issues, which will prohibit somebody from successfully writing the file.
File locking issues are different from general permissions errors. The former basically says "hey, someone else is editing this file. Therefore I won't let you edit it right now... you can read it if you want though." Permissions means somebody saves it, and Xsan thinks you saved it and own the file, when you really don't.
Quad-Core PMG5, 4 GB RAM, 7800 GT, 1 TB disk. Mac OS X (10.4.4)

Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc)?

Would like to use 4nr iPads as an autocue system. Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc) and the others operating as slaves? Can this be done without the use of 3G or a remote Wifi hub? I would appreciate your input.................

Open the document in Acrobat Reader and use the menu Window > New Window.

Cant open external links and multiple instances of the same profile.

I have multiple firefox profiles.
I constantly have two profiles running at the same time.
I use microsoft outlook and see an external link, I click it wishing firefox to open it in the default or new browser. It does not and says "FIrefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."
Firefox is running fine.
How can I open external links with a profile based setup?
Also, how can I open multiple instances of the same profile? I find that if I click and drag a tab to another monitor, it opens a new "instance" or browser window.

You say
''I have multiple firefox profiles. 
I constantly have two profiles running at the same time. ''
So you will have discovered ''-no-remote'' Note NOT to use that on the default browser; profile, only on secondary profiles.
* http://kb.mozillazine.org/Profile_in_use#Common_causes
You will NOT be able to open multiple instances of the same profile, clone the profile if necessary.
If you are trying to run multiple Webmail accounts in one profile then you may well find the webmail is identifying and setting the user account that is opened. Use a Private Browsing window to get round that and open a second account.
* [[Private Browsing - Browse the web without saving information about the sites you visit]]

Stop opening multiple instances of the same application

I am used to having graphic files on my desktop, when editing one I would simply right-click and pick "open with" > Photoshop (which is always open in its own desktop in my computer). Now out of the blue, if I do that, it loads another instance of Photoshop, which is certainly what I don't want. I can have 2, 3, 4 Photoshops running at the same time and editing the same image!
Any idea how to solve this? I searched but all I could find is people wanting the opposite i.e. opening multiple instances of the same app.

Your best bet to prevent this is to detach or unmount this drive; however, you can also try resetting your Mac's launch services, to have it re-scan only the Applications folders on your boot drive for programs to associate with documents and services you are using. Running the following command in the OS X Terminal will kill the current launch services database (its long, but copy and paste the entire line):
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/Support/lsregister -kill
Following this, run the following command to seed the database with the apps you currently have installed:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/Support/lsregister -seed
Note that these changes will only apply when opening documents that have not been specifically assigned to a program. If you find a specific document continues to open the program on the external drive, then you can get info on it and change the associated program in the "Open With" section of the info window. After doing this, you might need to re-run these commands above, as opening the program will register it with OS X's launch services and have it now be available for automatically handling other documents.

Problem:Multiple instances of the same applet on a webpage...

I have an applet which connects to a server to read an XML-file.
I use Doucument to parse the XML-file like this:
String xmlurl="http://www.somesite.com/somexmlpage.php";
Document d =DocumentBuilderFactory.newInstance().newDocumentBuilder().parse(xmlurl);
(...read the XML-file...)
This works fine.
However, I need multiple instances of the same applet running at the same time on the same webpage.
Now, with multiple applets running at the same time the parsing no loger works. If one applet is doing some parsing and a taskswitch takes place to let another applet run, the applet which is interrupted is not able to continue the parsing as it looses its "incoming data" when another applet reads from the server.
How can different applets affect each other like this?
And how can I fix the problem?
Thanks in advance for any help!!

However, I need multiple instances of the same applet running at the same time on the same webpage.
Why? But okay.Because the the different applets show information about different items.
Now, with multiple applets running at the same time the parsing no loger works. If one applet is doing some parsing and a
taskswitch takes place to let another applet run, the applet which is interrupted is not able to continue the
parsing as it looses its "incoming data" when another applet reads from the server.
How did you determine that's what's happening?By printing out debuginformation.
Each applet prints out a message (System.out.println) when it creates an instance of Document (ie. connects to the server) and the applet also prints out XML-information as the XML-file is processed.
But, actually, I was a bit quick in my first post; The applet doesen't neccesarily loose its "incoming data", but the parser looses the data it is parsing. I can download the data from the server first, and then start parsing it. If a taskswitch happens while one applet is parsing, it looses its data, even if the data is allready downloaded.
I see this since I see another applet making a printout, and when first applet starts again, the parser has lost track of its data.
It works fine if only one applet is running. And everything is fine until the next applets starts; I can see this from the printout.
Again, the appet prints out data as it parses the document. I see the next applet starting to work, and when the first one continues parsing again the printout shows that data is no longer there. It happens everytime the runtime switches to another applet, and it never happens if just one applet is running.
Googeling a little tells me that DocumentBuilder.parse() isn't thread-safe, but this shouldn't have anything to do with it, should it?
Each applet is a separate process, and not different threads in the same process, aren't they? (Not sure how the runtime treats multiple applets...)And secondly, the applets create their own instance of Document anyways.

Multiple accounts on the same resource

Experts,
I am trying to create multiple accounts for the same IDM user.
I have written a workflow which calls the subprocess to create multiple accounts. In the orignal workflow I pass the IDM accountId and the target system accountid in the Iterate loop.
In the subprocess i am checking out the user view then appending the resource specific parameters (mentioned below) and then checking in the view.
<Activity id='1' name='Add resource to user object'>
<Variable name='userObject'/>
<Action id='1' name='CheckOut User View' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='checkoutView'/>
<Argument name='type' value='User'/>
<Argument name='id'>
<ref>userId</ref>
</Argument>
<Argument name='TargetResources' value='EDS'/>
<Argument name='authorized' value='true'/>
<Argument name='Form' value="Empty Form"/>
<Variable name='view'/>
<Return from='view' to='user'/>
</Action>
<Action id='2' name='Add Attribute'>
<expression>
<block>
<set name='applicationuserid'>
<invoke name='get'>
<split>
<ref>userid_applicationid</ref>
<s>#</s>
</split>
0
</invoke>
</set>
<set name='resourcename'>
<invoke name='get'>
<split>
<ref>userid_applicationid</ref>
<s>#</s>
</split>
1
</invoke>
</set>
<set name='user.waveset.resources'>
<appendAll>
<ref>user.waveset.resources</ref>
<list>
<s>RACF</s>
</list>
</appendAll>
</set>
<set>
<concat>
<s>user.accounts[</s>
<ref>resourcename</ref>
<s>].created</s>
</concat>
<s>true</s>
</set>
<set>
<s>waveset.accounts[RACF].id</s>
<get>
<invoke name='getObject'>
<invoke name='getLighthouseContext'>
<ref>WF_CONTEXT</ref>
</invoke>
<s>Resource</s>
<s>RACF</s>
<Map>
<MapEntry key='action' value='update'/>
</Map>
</invoke>
<s>id</s>
</get>
</set>
<set>
<concat>
<s>user.accounts[</s>
<s>RACF</s>
<s>].name</s>
</concat>
<s>RACF</s>
</set>
<set>
<concat>
<s>user.accounts[</s>
<ref>resourcename</ref>
<s>].gapracfid</s>
</concat>
<ref>applicationuserid</ref>
</set>
<set>
<concat>
<s>user.accounts[</s>
<ref>resourcename</ref>
<s>].identity</s>
</concat>
<concat>
<s>uid=</s>
<ref>applicationuserid</ref>
<s>,ou=racf,ou=Applications,dc=gap,dc=com</s>
</concat>
</set>
<set>
<concat>
<s>user.accounts[</s>
<ref>resourcename</ref>
<s>].firstname</s>
</concat>
<ref>user.accounts[Lighthouse].firstname</ref>
</set>
<set>
<concat>
<s>user.accounts[</s>
<ref>resourcename</ref>
<s>].lastname</s>
</concat>
<ref>user.accounts[Lighthouse].lastname</ref>
</set>
<set>
<concat>
<s>user.accounts[</s>
<ref>resourcename</ref>
<s>].fullname</s>
</concat>
<ref>user.accounts[Lighthouse].fullname</ref>
</set>
</block>
</expression>
</Action>
<Action id='3' name='Check In User View' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='checkinView'/>
<Argument name='view' value='$(user)'/>
<Argument name='authorized' value='true'/>
<Argument name='Form' value="Empty Form"/>
</Action>
<Transition to='end'/>
<WorkflowEditor x='244' y='48'/>
</Activity>
When i run this in the IDM I can see all the entries but only first one is actually created on the target resource. When I open the user object in IDM and hit Save button IDM creates the accounts on the target system.
I have already tried by using the refresh view just before the checkin view action but no luck..
Any help for solving this problem would be appreciated.
Thanks

Thanks for the reply... in my case this would be done by the active synch process so no GUI form is required. I will be getting a list of application ID for the user by LDAP AS. One i get it i will have to parse it and get the list of application user id. I am passing those ID;s to a workflow where I am forming the resource name as you mentioned
for example:
If i get user1#user2#user3 from AS i am separating them based on # using split and getting 3 different user id;s
now i am forming a string with the resource name and passing it to the sub process in which i am checking out the user object, setting the user attributes and checking in the new view.
user1#LDAP
user2#LDAP|1
user3#LDAP|2
Problem ; When i run this user1 is getting created in LDAP but user2 and user3 are not. There entry is getting created in IDM.
When I open the IDM object I get a yellow triangle (warning) and if I open the user object and hit save button IDM creates the user account on the LDAP.
any help for further solving this problem would be appreciated.
Regards,

Multiple engines on the same system

Similar Messages

Maybe you are looking for