Multiple Files at sender side

Hi Friends,
Im working with a scenario which gives me two different files for a single sender file.
My sender structure is having a filed "Position" which takes 2 values ( One and Two).
When i give these values, my target structure will be of two messages, one with "Position = one" and the other with "Position = two".
Im getting two files at sender side...which includes both the messages in it.
Can anyone tell me how to get the two files which consists of ONE message each.
Thanks In Advance,
Divya

hi divya,
please have alook of following links,
for enhanced interface determination,
https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/3115. [original link is broken] [original link is broken] [original link is broken]
some other links..
Re: split messag. configuration
Re: Multi Mapping 1 to n. SP15
regards,
navneet

Similar Messages

Synchronous file adapter sender side configuration in sap pi

Hi Experts
synchronous file adapter sender side configuration in sap pi
can you explain any one tell me step by step procedure?
Regards
Sagar

Hi,
You can use RequestResponseBean in the sender file adapter module .
RequestResponseBean (SAP Library - SAP Exchange Infrastructure)
Request/Response Bean for IDOC_AAE adapter
Instead of IDOC_AAE adapter you can use FILE adapter.
Regards,

Hadeling multiple files in sender and receiver adapter

Hi ,
In my sender FTP server multiple files gets created at a same time i want to send this same files to the target FTP server am not doing any file content conversion. Just pick this multiple files at a single poll and drop it in the target FTP system.
I gave . in the as file name parameter in the sender file adapter..PI system picks all the files as separate message but if i give . in the receiver adapter itu2019s not creating the file and its giving Java exception..
Is there any other method to do this without having File content conversion... ?
Regards
Shakfie

I gave *.* in the as file name parameter in the sender file adapter..PI system picks all the files as separate message but if i give *.* in the receiver adapter itu2019s not creating the file and its giving Java exception..
For receiver adapter you have to give some file name, '.' will not work for receiver adapter. So give any temporary name just to satisfy the mandatory field. And when you selet the ASMA settings in both SENDER & RECEIVER adapter then your Receiver File adapter will write the same file name which it has picked up and NOT the one which you have written in your receiver adapter.
Note: Set ASMA setting in both else you will not get the same file name at receiver. You can see the same in blog given by Siva. You need not to create any UDF since you are not using any mapping. Just use the ASMA settings.. that's it.
> Is there any other method to do this without having File content conversion... ?
You can go through this blog for the same...
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
Regards,
Sarvesh

How to handle errors in a file at sender side?

Hi
I have done a file to proxy scenario.
I know how to handle errors on proxy.
But on sender side when picking the file if one the record have worng fomat its throwing mapping error and its not processing any record..
I wanted to process the records which have right format and data and all remaining recrods which have wromg format should be send back to the sender as file.
How to do this.
How to handle error in sender file.
Regards
Sowmya

Hello Sowmya,
In your scenario Three ways you can validate the data.
1) Before the data reaches into SAP system ie in XI system during Mapping or before mapping i,e in Adapter Module in the Sender side
2) this option, is in the receiver applications side. ie. Validations will be taken care in the SAP system i.e in ABAP server proxy code.
3)Through BPM, If Mapping Exception Occures then through exception Branch you can send bad formate file to sender again.
Generally, it is prefer to more business critical validations in the Application System ie Receiver Application System (ABAP Server Proxy)
In this, you can have more flexibility of the validations as you are validating some of the SAP payroll informations as Personal ID etc.
Based on the complexity and flexibility of the requirement, you can either do this in the XI (if XI, ie Sender Adapter Module or Mapping) or in the ABAP proxy
Thanks'
Sunil Singh

Selecting & viewing multiple files to send it thro...

Is there any solution foe selecting multiple files including songs, videos documents via blutooth ????????

You can select one file at a time to share via BT.

Multiple files at sender File adapter

Hi,
I am new to XI and i am trying to do file to file scenario. My requirement is i want to send four files with different names from same directory to the receiver. Is it possible with one sender communication channel? If so can u please tell me how i can do..?
Thanks,
Naresh

Hi Naresh,
yes it can be done with single CC.
Check this blog:
XI/PI: how to exclude files in a sender File adapter?
Sachin

Using Send to with multiple files in Sharepoint 2013

I believe I was able to copy multiple files using "Send To" just a week ago when I was testing things. But then, it would not allow me to yesterday. It would only allow it if one file is selected. Has there been a change? Or is there
a setting that would turn this on or off? Thanks.

i dont think, there is option to copy multiple files using Send to Location function...its only for one document at a time. you can configure multiple send to connection.
there are other ways, i.e open with explorer and then copy multiple documents, or create workflow which copy documents from one library to other.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

PDF files in sender file adapter

Hi,
Can XI pick up pdf files (.pdf) from a folder using File Adapter?
If yes can u send me some blogs on this?
Thanks in advance.

Hi,
It can be done by bypassing the payload from Integrationg engine.In this case this case XI will not process the PDF file but jus picks up the file from sender side and places it on the target side with no translations and message processing.No IR is required in this case.ID is enough.The file go thorough Adapter Engine it self.
Jus follow the link provided it works.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/filetofilewithoutusingwithIntegration+Repository
But if u want to read the contents of the PDF also then there is no other way than writing the Javabased Moudle and configure it .
Thanks,
Ram.

Sending multiple files using one socket

Hi guys
I'm working on a simple app that sends multiple files over LAN or I-NET. The problem is that the app run seems to be non-deterministic. I keep getting this error on the client side:
java.io.UTFDataFormatException: malformed input around byte 5
        at java.io.DataInputStream.readUTF(Unknown Source)
        at java.io.DataInputStream.readUTF(Unknown Source)
        at service.DownloadManager.storeRawStream(DownloadManager.java:116)
        at service.DownloadManager.downloadFiles(DownloadManager.java:47)
        at manager.NetworkTransferClient$1.run(NetworkTransferClient.java:104)The byte position changes every time I run a transfer. The error is caused by this line: String fileName = in.readUTF(); Here's the complete code:
Client
private void storeRawStream() {
        try {
            FileOutputStream fileOut;
            int fileCount = in.readInt();
            for(int i=0; i<fileCount; i++) {
                byte data[] = new byte[BUFFER];
                String fileName = in.readUTF();
                fileOut = new FileOutputStream(new File(upload, fileName));
                long fileLength = in.readLong();
                for(int j=0; j<fileLength / BUFFER; j++) {
                    int totalCount = 0;
                    while(totalCount < BUFFER) {
                        int count = in.read(data, totalCount, BUFFER - totalCount);
                        totalCount += count;
                    fileOut.write(data, 0, totalCount);
                    fileOut.flush();
                    bytesRecieved += totalCount;
                // read the remaining bytes
                int count = in.read(data, 0, (int) (fileLength % BUFFER));
                fileOut.write(data, 0, count);
                fileOut.flush();
                fileOut.close();
                transferLog.append("File " + fileName + " recieved successfully.\n");
        } catch (Exception ex) {
            ex.printStackTrace();
    }Server
public void sendFiles(File[] files) throws Exception {
        byte data[] = new byte[BUFFER];
        FileInputStream fileInput;
        out.writeInt(files.length);
        for (int i=0; i<files.length; i++) {
            // send the file name
            out.writeUTF(files.getName());
// send the file length
out.writeLong(files[i].length());
fileInput = new FileInputStream(files[i]);
int count;
while((count = fileInput.read(data, 0, BUFFER)) != -1) {
out.write(data, 0, count);
bytesSent += count;
fileInput.close();
out.flush();
Does anybody know where's the problem? Thanx for any reply.

Send the length of each file ahead of each file, with DataOutputStream.writeLong().
When reading, read that long, then stop reading bytes when you've read exactly that length.

Sending multiple files using file adapter

The scenario I am implementing requires multiple files of different names to be picked up by my adapter. I dont want to create different file adapters for each file. I tried using the "Additonal Files" option in the sender file adapter in my configuration, but am not able to do the same. Any idea as to how the configuration for multiple files for same adapter isto be done?

Hi bhavesh
Fundamental of adapter configuration is you have to give valid xml structure to XI, so you will define your configuration according to your requirement.
for .xml you have file as a message protocol while for .csv you have file content conversion as a message protocol.
So you have to define adpater configuration for sender side for one type of structure.
So you need a different communication channel for different extentions.
for diffrent strcutures,having same extention, you can execute this.
Please make me clear that what is your scenario?
why you need to pick all files under a directory with a same communication channel?
Regards
Piyush

Send multiple files in different directories using Receiver File Adapter

Hi Experts,
I have one File to File without ESR scenario where I have to pick multiple files from different directories and to save them in different directories on receiver side.
Can anyne help me to send multiple files in different directories using receiver file adapter.
Is it possible??
Any help will be appreciated.
Regards,
Danish

hi ,
that is possiable without esr,
we need to create one sender communication channel , in that we nend to use "adavnced selection for source file " for sending multiple files from multiple directories.
we need to create 'n' receiver communication channels and 'n' receiver agreements based on communication channels .
in receiver determination, provide multiple receivers
In interface determination , provide * symbol for receiver communication components
thanks,

Sending multiple files

in file to file. i am sending multiple file with different file name and in target side the same file names should be displayed.help me how to solve problem

Hi,
In recevier communication channel we have advanced tab, asam properties we have enable that file name.
try {
String filename    = "";
DynamicConfiguration conf1 = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key1 = DynamicConfigurationKey.create( "http:/"+"/sap.com/xi/XI/System/File","FileName");
filename = conf1.get(key1);
filename = filename".xml";
conf1.put(key1,filename);
return filename;
catch(Exception e)
     String exception = e.toString();
      return exception;
regards,
ganesh.

(RFC vs files), where Sender SAP and receiver multiple system

Publish and Subscribe using BPM or Without BPM (RFC vs files), where Sender SAP and receivers multiple system,.
This is my 1st BPM scenario in sandbox system
For this scenario
I Created 2 Data types
2 MT,
Service interface:
Request interface Mode:Asynchronous
Abstract Req interface,Mode:Asynchronous
Response Interface,Mode:Asynchronous
Abstract Respomse Interface ,Mode:Aysnchronous
Synchronous Interface ,Mode:Synchronous
2 Message mapping for Req and Resp
1 Operation Mapping
BPM design: Plz find the attatchement
Can anyone please help me how many Interface determinations,receiver determinations ,sender agreements,receiver agreements need to create for this.......
It will be good if anyone send the BPM design flow for this.........
can we do this scenario without BPM?
Regards
A.Muni kumar
Edited by: Muni 1234 on Jan 31, 2012 10:24 AM

Hi
Receiver is FTP only.....
SAP side is RFC.........
RFC sender will be initiating the scenario, and there is receiver is File, PI should go to file directory and take the file then send it back to RFC as response.
Sender: RFC
Receiver: File
1. is this scenario with condition based routing.. so that each time outof many receiver systems it will trigger any specific system.
if above is the case then you can achive this without BPM also..
Yes...its condition based routing...
I Used async in this scenario.....sender side configurations also done....
But when when I am triggering BAPI from SE37 I am getting an error
Exception SYSTEM_FAILURE
Message ID: 00 Message number: 341
Message:
Runtime error CALL_FUNCTION_NOT_FOUND has occurred
How to Solve this????
I checked the RFC destination which i created in TCP/IP..a nd i mentioned the same in se37 RFC target system..
Connection is Ok
Or we need to create proxy for MI and report for this?
Edited by: Muni 1234 on Feb 1, 2012 8:38 AM

When i send a PDF file to out side print, some of the things I aded dose not print. Is there a way I can "close" the PDF when i finish the work- so' every thing will be printed for sure

when i send a PDF file to out side print, some of the things I aded dose not print.
Is there a way I can "close" the PDF when i finish the work- so' every thing will be printed for sure

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

Flat file name from Sender Side Dynamically into subject of Receiver Mail

Hi All,
         I am Using a file to Mail Scenario, My requirement is to get dynamically the file name from flat file of the Sender Side into Subject of Receiver Mail Adapter and attachment of file from the Sender Side. Can anyone help me out.
Thanks in Advance

Hi....
          You can write udf in the message mapping to get the Dynamic file name and map that to the subject of the receiver mail.
DynamicConfiguration conf = (DynamicConfiguration) param.get(
          StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey KEY_FILENAME = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
      // read value
      String Filename = conf.get(KEY_FILENAME);
Regards,
Leela

Multiple Files at sender side

Similar Messages

Maybe you are looking for