Multiple header cells

I understand how to make the top row on a table a header row that will appear on all pages of a multiple page sheet.
Is it possible to get the top 2 rows (or any other number, for that matter) to act as a header row as well? I would like more than one row of the first printing page of a sheet to appear on all sheets.
Thanks.

Hello
you wrote:
+Simple solution to the multiple header rows.+
+Not being able to select where I start filtering my data and also allowing multiple filters on data would be helpful too. But that's a different subject.+
And this forum is not the better way to send a request about Numbers.
Most of us are users trying to help other users, we aren't Apple employees.
This forum is rarely entered by Apple engineers so the hope to get one of them reading your post is near zero.
It would be more efficient to use the standard track:
go to "Provide Numbers Feedback" in the "Numbers" menu and describe your wishes
Yvan KOENIG (from FRANCE mercredi 3 octobre 2007 19:10:19)

Similar Messages

Multiple Header line in Receiver File adapter

Hi,
I have an issue in Receiver File adapter with multiple header lines. I am able to get only 1 header lines in the receiver file but not multiple header lines with 'nl' since it is static in file mode
[CommunityTag:Header]
empNo,EmpName,Age
[CommunityTag]
I tried with the below in content conversion one as below with no luck
Root.addHeaderLine=1
Root.headerLine=[CommunityTag:Header] 'nl' empNo,EmpName,Age 'nl' [CommunityTag]
Root.fiedSeparator=,
Root.endSeparator='nl'
I am getting the Header line as same row as static text.
Can you advise this.

Hi Gabriel, I suggest to produce the header lines from additional nodes in the message payload. That means you need to modify the data type of the target message in order to generate an extra structure in the payload. Use constants in message mapping to generate the header column names, e.g.
<Header>
<H1>CommunityTag:Header</H1>
<H2>empNo,EmpName,Age</H2>
<H3>CommunityTag</H3>
</Header>
In content conversion you have to convert the Header row with
Header.endSeparator='nl'
You won't need parameter addHeaderLine anymore then.
Regards, Martin

Check on multiple header line data.

Hi All,
I have one requirement where i need to check the multiple accounting document header line.
Kindly suggest how to check the above requirement.
Thanks in Advance!
Regards,
Chirag

Hi All,
Sorry for the short description.
Currently i am validating only the one header line data of expense spread sheet file with vendor. but the now requirement has changed and there can be a multiple header line item also.
So i need to check for each header line item whether vendor already exist or not.
I am able to check it for 1 header line item, Kindly suggest how to check it for multiple header line item.
Thankyou.
Chirag

Multiple Heading in ALV Grid

Hello ,
I have a requirement to display Multiple heading in ALV Grid, I am using the Class 'cl_gui_alv_grid'. please let me know if you have Any suggestions.
Ex:
|                 Divison                     |
Sub D:1
Sub D: 2
Sub D: 3
    Like wise i have few more divisions to display and Under we need to display the Sub Division also .
Thanks in Advance.. Waiting for your suggestions.
With Best Regards
Nags

Hi,
I had attempted to do it in the object oriented way, but found no ready solution, so I settled for the below solution.
Please use the function REUSE_ALV_COMMENTARY_WRITE.
This allows you to print multiple lines in the header.
I had a requirement of showing 5 lines in the header.
So i went on like:
DATA: it_list_commentary TYPE slis_t_listheader,
           wa_list_commentary TYPE slis_listheader.
wa_list_commentary-typ = 'H'.
wa_list_commentary-info = <text>.
APPEND wa_list_commentary TO it_list_commentary.
wa_list_commentary-typ = 'S'.
wa_list_commentary-info = <text>.
APPEND wa_list_commentary TO it_list_commentary.
I fed he internal table with all 5 lines like above.
Finally I called the function.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = it_list_commentary.
Regards,
Prosenjit.
Edited by: prosenjit chaudhuri on Jan 28, 2009 6:14 AM

Word wrapping in row header cell in OLAPDataGrid

I have an issue with the OLAPDatagrid. Does anyone know how
to wrap text in the row header cells?
(to avoid confusion, i will demonstrate my issue using a grid
with 1 row and 1 column dimension).
OLAPDataGrid has 2 properties: wordWrap, which only seems to
affect the data cells, and headerWordWrap which only appears to
affect the dimension data across the topmost row.
However, neither of these properties appear to allow the row
dimensions' data to wrap (this is the data in the leftmost column).
Not only this, the column does not automatically resize to reveal
the data.
I also can't see how to manually modify the width of the
columns as at the point when the olapdatagrid's dataprovider is
assigned to the olapresult, the column count is zero.
any suggestions?
thanks
Mark

//i tryied this it is not working
//its selecting the first colum first row and when i clicked the second row header it is selecting the second //column seconf row.
//And pressing Ctrl [key] and click row header is not working.
what do u mean by Second row header. For a Table we wil be having only one header na

Multiple Header Line In HIERSEQ ALV

Hi Experts,
Please guide me how to get miltile Header lines in the HIERSEQ Alv , My requirment it develop a genledger for customers in which the Address of customer should be in 3 or four lines then followed by its balances. Please suggest me ...
Regards,
Prakash

Hi,
You need to pass the Row number to the filed catlog in order to display multiple header lines.
For example,
   wl_fieldcat-row_pos = 1. " This field will be displayed in first row
wl_fieldcat-col_pos     = 1.
wl_fieldcat-fieldname   = 'VBELN'.
wl_fieldcat-tabname     = 'T_VBAK'.
wl_fieldcat-outputlen   = 20.
Append wl_fieldcat to t_fieldcat.
wl_fieldcat-row_pos = 2.    " This field will be displayed in Second row
wl_fieldcat-col_pos     = 1.
wl_fieldcat-fieldname   = 'VBELN'.
wl_fieldcat-tabname     = 'T_VBAK'.
wl_fieldcat-outputlen   = 20.
Append wl_fieldcat to t_fieldcat.
Regards,
Rajneesh

Flat file having multiple header lines , how to separate the same and pushit into my intrnal table

Hi Guys,
                I got an issue , My flat file having multiple header lines
TPS27RPR MOME                                      THRIFT (SAVING) PLAN SYSTEM                                           Page    2
09:54 05 JAN 2014                          List of Contributors w/Company Contributions                           Phase DAY Unit TRE
Company No: xxxxxxxx - xxxxxxxxxxxxx.
                                                                        Employee/       Employee/
Employee Full Name/                                                       Company         Company                        Allocation
Number ID Number                           PS PN End Date        Contribution          Profit        Total Balance   Percentage
some lines of data and again
TPS27RPR MOME                                      THRIFT (SAVING) PLAN SYSTEM                                           Page    2
09:54 05 JAN 2014                          List of Contributors w/Company Contributions                           Phase DAY Unit TRE
Company No: xxxxxxxx - xxxxxxxxxxxxx.
                                                                        Employee/       Employee/
Employee Full Name/                                                       Company         Company                        Allocation
Number ID Number                           PS PN End Date        Contribution          Profit        Total Balance   Percentage
in this case how could I separate the header lines from the flat file and update the details to my internal table.
kindly help me on this issue.
Thanks and regards,
M.S.Amirtharajvijay.

Hi Amirthraj,
If the flat file is static (if the content within it is same for all) then use the offset concept. First get the contents of the flat file into an internal table and later find the field that has to be in final internal table within the line, calculate the offset for the line and get the value into an workarea. Finally modify/append the work area into an internal table. Also wait for other experts answers for any other hassle free way to achieve the requirement.
With Regards,
Giriesh M

ALV with multiple header & dynamic columns

Hello All,
I have a requirement where in I need to print multiple header in alv.
For eg.
User Name : <Name_1>
Channel     : <Channel_1>
Sale Org    : <Sales Org_1>
Col1 Col2 Col3 Col4 Col5 Col6 Col7 Col8
User Name : <Name_2>
Channel     : <Channel_2>
Sale Org    : <Sales Org_2>
Col1 Col2 Col3 Col4 Col5 Col6 Col7 Col8
no of columns (Col1 , col2 ) are dynamic . Which would be the best alv type do I need do use? Is it possible using simple alv grid display. How to handle dynamic column.
Thnx.

it is not possible with normal grid or list.
I guess it is possible by using ALV Block list
Modified below program to get mutiple header
REPORT z_alv_block_list.
Type-pools
TYPE-POOLS: slis.
Data declarations.
DATA: BEGIN OF t_vbak OCCURS 0,
        vbeln TYPE vbeln,
        bstnk TYPE vbak-bstnk,
        erdat TYPE vbak-erdat,
        kunnr TYPE vbak-kunnr,
      END OF t_vbak.
DATA: BEGIN OF t_vbap OCCURS 0,
        vbeln TYPE vbeln,
        matnr TYPE vbap-matnr,
        netpr TYPE vbap-netpr,
        waerk TYPE vbap-waerk,
        kwmeng TYPE vbap-kwmeng,
        meins TYPE vbap-meins,
      END OF t_vbap.
DATA: t_fieldcatalog1 TYPE slis_t_fieldcat_alv.
DATA: t_fieldcatalog2 TYPE slis_t_fieldcat_alv.
DATA: v_repid         TYPE syrepid.
DATA: s_layout        TYPE slis_layout_alv.
DATA: v_tabname       TYPE slis_tabname.
DATA: t_events        TYPE slis_t_event.
start-of-selection event.
START-OF-SELECTION.
v_repid = sy-repid.
Get the fieldcatalog for the first block
PERFORM get_fieldcat1 CHANGING t_fieldcatalog1.
Get the fieldcatalog for the second block
PERFORM get_fieldcat2 CHANGING t_fieldcatalog2.
Get the data for the first block
SELECT vbeln bstnk erdat kunnr UP TO 10 ROWS
         INTO TABLE t_vbak
         FROM vbak WHERE vbeln > '0060000100'.
Get the data for the second block
SELECT vbeln matnr netpr waerk kwmeng meins UP TO 10
ROWS
         INTO TABLE t_vbap
         FROM vbap WHERE vbeln > '0060000100'.
init
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
       EXPORTING
            i_callback_program = v_repid.
First block
v_tabname = 'ITAB1'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
       EXPORTING
            is_layout   = s_layout
            it_fieldcat = t_fieldcatalog1
            i_tabname   = v_tabname
            it_events   = t_events
       TABLES
            t_outtab    = t_vbak.
Second block
v_tabname = 'ITAB2'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
       EXPORTING
            is_layout   = s_layout
            it_fieldcat = t_fieldcatalog2
            i_tabname   = v_tabname
            it_events   = t_events
       TABLES
            t_outtab    = t_vbap.
*Display
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
      FORM GET_FIELDCAT1
      Get the field catalog for the first block
FORM get_fieldcat1 CHANGING lt_fieldcatalog TYPE
slis_t_fieldcat_alv.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
Order number
s_fieldcatalog-col_pos       = '1'.
s_fieldcatalog-fieldname     = 'VBELN'.
s_fieldcatalog-tabname       = 'T_VBAK'.
s_fieldcatalog-ref_tabname   = 'VBAK'.
s_fieldcatalog-ref_fieldname = 'VBELN'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Customer purchase order.
s_fieldcatalog-col_pos       = '2'.
s_fieldcatalog-fieldname     = 'BSTNK'.
s_fieldcatalog-tabname       = 'T_VBAK'.
s_fieldcatalog-ref_tabname   = 'VBAK'.
s_fieldcatalog-ref_fieldname = 'BSTNK'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Creation date.
s_fieldcatalog-col_pos       = '3'.
s_fieldcatalog-fieldname     = 'ERDAT'.
s_fieldcatalog-tabname       = 'T_VBAK'.
s_fieldcatalog-ref_tabname   = 'VBAK'.
s_fieldcatalog-ref_fieldname = 'ERDAT'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Customer
s_fieldcatalog-col_pos       = '4'.
s_fieldcatalog-fieldname     = 'KUNNR'.
s_fieldcatalog-tabname       = 'T_VBAK'.
s_fieldcatalog-ref_tabname   = 'VBAK'.
s_fieldcatalog-ref_fieldname = 'KUNNR'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
ENDFORM.
      FORM GET_FIELDCAT2
      Get the field catalog for the second block
FORM get_fieldcat2 CHANGING lt_fieldcatalog TYPE
slis_t_fieldcat_alv.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
Order number
s_fieldcatalog-col_pos       = '1'.
s_fieldcatalog-fieldname     = 'VBELN'.
s_fieldcatalog-tabname       = 'T_VBAP'.
s_fieldcatalog-ref_tabname   = 'VBAP'.
s_fieldcatalog-ref_fieldname = 'VBELN'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Material number
s_fieldcatalog-col_pos       = '2'.
s_fieldcatalog-fieldname     = 'MATNR'.
s_fieldcatalog-tabname       = 'T_VBAP'.
s_fieldcatalog-ref_tabname   = 'VBAP'.
s_fieldcatalog-ref_fieldname = 'MATNR'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Net price
s_fieldcatalog-col_pos       = '3'.
s_fieldcatalog-fieldname     = 'NETPR'.
s_fieldcatalog-tabname       = 'T_VBAP'.
s_fieldcatalog-ref_tabname   = 'VBAP'.
s_fieldcatalog-ref_fieldname = 'NETPR'.
s_fieldcatalog-cfieldname    = 'WAERK'.
s_fieldcatalog-ctabname      = 'T_VBAP'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Currency.
s_fieldcatalog-col_pos       = '4'.
s_fieldcatalog-fieldname     = 'WAERK'.
s_fieldcatalog-tabname       = 'T_VBAP'.
s_fieldcatalog-ref_tabname   = 'VBAP'.
s_fieldcatalog-ref_fieldname = 'WAERK'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Quantity
s_fieldcatalog-col_pos       = '5'.
s_fieldcatalog-fieldname     = 'KWMENG'.
s_fieldcatalog-tabname       = 'T_VBAP'.
s_fieldcatalog-ref_tabname   = 'VBAP'.
s_fieldcatalog-ref_fieldname = 'KWMENG'.
s_fieldcatalog-qfieldname    = 'MEINS'.
s_fieldcatalog-qtabname      = 'T_VBAP'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
UOM
s_fieldcatalog-col_pos       = '6'.
s_fieldcatalog-fieldname     = 'MEINS'.
s_fieldcatalog-tabname       = 'T_VBAP'.
s_fieldcatalog-ref_tabname   = 'VBAP'.
s_fieldcatalog-ref_fieldname = 'MEINS'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
ENDFORM.

TableView - different background color of header cell

Hello,
I'd like to render table view with header cell of certain background color.
I think I can use <i> IHeaderCellRenderer </i> but I can't find out how to set background color from javadoc.
Best regards,
Josef Motl

Try using something like:
tableView.setStyleForCell(i, column, TableCellStyle.SUBTOTAL);
Best regards
Francisco

Multiple header variables in bpelx:inputHeaderVariable

While investigating the use of the bpelx:inputHeaderVariable call for creating a SOAP message header, I found the following blog entry:
http://chintanblog.blogspot.com/2007/12/insertextract-soap-headers-in-bpel-it.html
The author creates three variables for passing security credentials in a SOAP message header, then invokes the partner link to the "secure" process using this Invoke activity:
<invoke name="Invoke_ExtractHeaderProcess" partnerLink="ExtractHeaderBPELProject" portType="ns2:ExtractHeaderBPELProject" operation="process"
inputVariable="Invoke_ExtractHeaderProcess_process_InputVariable" outputVariable="Invoke_ExtractHeaderProcess_process_OutputVariable"
bpelx:inputHeaderVariable="Variable_Username, Variable_Password, Variable_ComplexCredentialElement"/>
I downloaded his code to JDeveloper 10.1.3.3.0 and SOA Suite 10.1.3.1 and attempted to deploy it. I received the following error:
BUILD FAILED
C:\jdevstudio101330\jdev\mywork\InsertExtractHeaders\InsertHeaderVariables\build.xml:79: A problem occured while connecting to server "localhost" using port "8888": bpel_InsertHeaderVariables_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "InsertHeaderVariables" (revision "1.0"): Failed to compile classes.
Failed to compile the generated BPEL classes for "InsertHeaderVariables".
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:285)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:804)
at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:670)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:445)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:620)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:317)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:339)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
I had already attempted something similar in one of my own BPEL processes with the same erroneous result. The source of the problem would appear to be the list of multiple header variables since it disappears if a single variable is specified. Yet the author claims success with this technique.
How can I get this to work?
Thanks for your time,
Paul Camann

I see from Metalink that this topic was the subject of Bug 5623319, but it is difficult to tell from the trail of bread crumbs in the bug description whether (a) the bug was fixed, and if so, (b) the fix is included in JDev 10.1.3.3.0 or is a separate patch that must be applied. Clarification would be GREATLY appreciated.

Table header cell dividers

Is there a way to have to make the cells divider lines in a table header be a custom thickness. with different thicknesses on different pages. I am thinking there is no way to do this inside of FM 8. And would that be changed in the read and write or the dtd.

Hi Frank,
There's a somewhat more complicated way that has some advantage if you don't mind the work. This solution is to place PDF images of the titles in the header cells as Background Fill Images. The main advantage over a grouped text box is that the background fill image will track the particular cell exactly, even if rows and columns are added or deleted or resized, including the one that the image is in.
Start with your title in a text box that "just fits".
Click off the box and then click once back on the box, such that the handles are showing but the text is not selected.
Command-C
Switch to Preview.app and Command-N. You now have converted your title to a PDF.
Still in Preview, Command-C to copy the PDF
Switch to Pages, Select the Cell, Command-V to set the PDF into the background.
Set the justification to centered, both vertically and horizontally for the best tracking.
As far as the rotation goes, you can rotate the Text Box before you convert it, or you can rotate the PDF before inserting into the cell. It doesn't matter.
Regards,
Jerry

ADF pivot table header cell iteration

Hi All,
I am working on a program where I want to pass the header cells separated by "|" to the analysis server.
for example:
||Fiscal|FPB|Projected Sales||KAV|Projected Sales||KCT|Projected Sales||KSA|Projected Sales||All Products|Projected Sales|
This should be result of a pivot table where Fiscal is on column layout and crossjoin of Product(FPB, KAV,KCT, ALL) and Measure(Projected Sales) on row layout.
Is it possible?
Thanks.

Hi,
according to the documentation, this should not be the case. As you can see, the documentation explicitly calls toString() for the string representation: http://docs.oracle.com/cd/E28389_01/web.1111/b31973/dv_crosstab.htm#CHDGCBIG . You can narrow down the problem by using the default cell format and see what this returns
Frank

Extracting text from header cells

Hi all,
Can someone help me with extracting the text from a header cell?
I know that for a standard cell I can use the T() function, but this seems not to wok for the column or row headers of a table.
Thanks,
Ziv

Yes, I am stuck with the same problem.... any ideas out there?
thanks

Help on ALV with multiple header/item output

Dear all:
Below is the actual working code on a multiple header/item display. The alv is supposed to output the details differently in each list. But somehow it only display the last i_tab I gave in all the list(they all look the same). Please help me out here how I can change my code to work properly. Thanks...
*& Report ZTEST2
REPORT ZTEST2.
type-pools: slis.
data : NUM1 type I,
       NUM type I,
       begin of str,
       client like mara-mandt,
       mat like mara-matnr,
       end of str,
       tab like standard table of str.
data :wa2 type slis_alv_event ,
      tab2 like standard table of wa2,
      wa1 type   slis_layout_alv,
      wa type line of slis_t_fieldcat_alv,
       tab1 like standard table of wa.
       wa-reptext_ddic = 'Client Num'.
       wa-fieldname = 'CLIENT'.
       wa-tabname = 'TAB'.
       wa-ref_fieldname = 'MANDT'.
       wa-ref_tabname = 'MARA'.
       wa-seltext_l = 'CLIENT'.
       append wa to tab1.
       wa-reptext_ddic = 'Mat Number'.
       wa-fieldname = 'MAT'.
       wa-tabname = 'TAB'.
       wa-ref_fieldname = 'MATNR'.
       wa-ref_tabname = 'MARA'.
       wa-seltext_l = 'MATERIAL'.
       append wa to tab1.
      wa1-no_colhead = 'X'.
       wa2-NAME = SLIS_EV_TOP_OF_PAGE.
       wa2-FORM = 'WRITE_TOP_PAGE'.
       APPEND wa2 TO tab2.
NUM = 0.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    I_CALLBACK_PROGRAM             = sy-cprog.
do 2 times.
NUM1 = NUM1 + 10.
refresh: tab.
select mandt matnr up to NUM1 rows from mara into table tab.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    IS_LAYOUT                        = wa1
    IT_FIELDCAT                      = tab1
    I_TABNAME                        = 'TAB'
    IT_EVENTS                        = tab2
TABLES
    T_OUTTAB                         = tab.
enddo.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
FORM WRITE_TOP_PAGE.
NUM = NUM + 1.
WRITE: / ,
         / 'TABLE NUMBER :', NUM.
ENDFORM.

Hi Jim,
yes for some reason ALV expects you to be using different tables. It seems that it does not save the contents of the tables at each call of 'append' rather it waits until 'display' to deal with the table contents at that time, which in your case is the 20 items.
What you can do is use dynamic tables. check this out:
REPORT ZNRW_ALV_BLOCK                          .
type-pools: slis.
data : NUM1 type I,
NUM type I.
types:
begin of str,
client like mara-mandt,
mat like mara-matnr,
end of str.
data
tab type standard table of str.
data :wa2 type slis_alv_event ,
tab2 like standard table of wa2,
wa1 type slis_layout_alv,
wa type line of slis_t_fieldcat_alv,
tab1 like standard table of wa.
wa-reptext_ddic = 'Client Num'.
wa-fieldname = 'CLIENT'.
wa-tabname = 'TAB'.
wa-ref_fieldname = 'MANDT'.
wa-ref_tabname = 'MARA'.
wa-seltext_l = 'CLIENT'.
append wa to tab1.
wa-reptext_ddic = 'Mat Number'.
wa-fieldname = 'MAT'.
wa-tabname = 'TAB'.
wa-ref_fieldname = 'MATNR'.
wa-ref_tabname = 'MARA'.
wa-seltext_l = 'MATERIAL'.
append wa to tab1.
wa1-no_colhead = 'X'.
wa2-NAME = SLIS_EV_TOP_OF_PAGE.
wa2-FORM = 'WRITE_TOP_PAGE'.
APPEND wa2 TO tab2.
NUM = 0.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
I_CALLBACK_PROGRAM = sy-cprog.
DATA tabDREF TYPE REF TO DATA.
FIELD-SYMBOLS <tab> TYPE table.
do 2 times.
CREATE DATA tabdref TYPE table of str.
ASSIGN tabDREF->* TO <tab>.
NUM1 = NUM1 + 10.
refresh: tab.
select mandt matnr up to NUM1 rows from mara into table <tab>.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
IS_LAYOUT = wa1
IT_FIELDCAT = tab1
I_TABNAME = 'TAB'
IT_EVENTS = tab2
TABLES
T_OUTTAB = <tab>.
enddo.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
FORM WRITE_TOP_PAGE.
NUM = NUM + 1.
WRITE: / ,
/ 'TABLE NUMBER :', NUM.
ENDFORM.

How to avoid multiple Header(TOP-OF-PAGE) because of page break

Hi All,
I am working with a classical report in which we are getting multiple header because of page break.
can we get a single header, in other words can we trigger TOP-OF-PAGE event only once not every
time when a page break occurs.
Regards
Manish

use TOP_OF_LIST Event Instead of TOP_OF_PAGE.
Sandip Sonar.

Multiple header cells

Similar Messages

Maybe you are looking for