Multiple IP Adresses

I am testing the RJAX product for calling COM+ components from a Java application. The RJAX product is licensed for a specific IP Address. This should be the IP Address that the Java VM is using. Unfortunately I have multiple IP addresses and I do not know how to control the IP address the JAVA VM is using. I have a program giving me the IP address the VM is using. When I run the program it is not always the same.
Is there any way of forcing the VM to use a specific IP address ?
I'm running Windows 2000 Server and J2RE 1.4.0.01
Thank you

So, there is no way to resolve the problem in this
discussion then. Depends. There are certainly ways to use multiple IP addresses.
But that has nothing to do with the VM.
And if your only interaction with IPs is via the third party package, then there is a bug in the third party package if it doesn't allow you to specify a specific IP or look for it by itself.
I mean if I have two network card,
and it is up to the VM to pick which one to look for
and there is no way I can force it to look for the
right IP address? Thank you very much.

Similar Messages

How to configure multiple IP-Adresses on one NIC in OVM

Hi guys,
we have some OVM Servers 2.2.1 installed. They all have three NICs in them (eth0-2). For eth0 and eth2 we need multiple IP-Adresses configured to work with our storage solution. The configuration should look like this:
eth0:0 - 192.168.31.x
eth0:1 - 192.168.33.x
eth1 - 192.168.0.x
eth2:0 - 192.168.32.x
eth2:1 - 192.168.34.x
I tried creating gonfig files ifcfg-eth0:0 in /etc/sysconfig/network-scripts with the following content
DEVICE=eth0:0
BOOTPROTO=static
ONBOOT=yes
NETMASK=255.255.255.0
IPADDR=192.168.31.3
TYPE=Ethernet
HWADDR=00:1b:21:06:f0:fa
But it does not work. Neither eth0:0 nore an additional xenbr is configured when i restart.
I can configure multiple ip addresses for xenbr0 by calling something like "ifconfig xenbr0 192.168.31.x". But these settings get lost as sonn as i reboot the server.
I have already searched google, forums and blogs for a solution but could not find one. I thought that this should be a pretty common task. In "normal" linux it is not an issue at all.
Has somebody any experience with a setup like this? I would really apreciate your help.
Thanks
Marek

Hi,
configuring IP aliasses seems to work the same way like configuring VLANs. You will have to configure the appropriate bridges at system startup manually.
E.g. this little script is what I use to configure VLANs and briges on my OVM:
#!/bin/bash
echo "Configuring VLANs and bridges\n"
echo "Configuring VLAN 24 on eth2"
vconfig add eth2 24
brctl addbr br2.24
brctl addif br2.24 eth2.24
ifconfig eth2.24 up
ifconfig br2.24 up
echo "Configuring VLAN 31 on eth2"
vconfig add eth2 31
brctl addbr br2.31
brctl addif br2.31 eth2.31
ifconfig eth2.31 up
ifconfig br2.31 up
This script is run at startup by init using this startup skript in /etc/init.d, which is what I think you're missing as you can already seem to bring up the needed IPs manually - you'd have to change the chkconfig accordingly, that is make sure that the config script gets startet after the network has been brought up, like this: # chkconfig: 2345 11 91
[root@oraclevm01 ~]# cat /etc/init.d/vlan-config
#! /bin/bash
# vlan-config configure VLANs
# chkconfig: 2345 11 89
# description: Configures VLANs at boot time before the \
# network is started.
### BEGIN INIT INFO
# Provides: $vlan
### END INIT INFO
# Source function library.
. /etc/init.d/functions
if [ ! -f /etc/vlan-config ]; then
exit 0
fi
# See how we were called.
case $1 in
     start)
               # configure vlans
               /etc/vlan-config
          echo $"Usage: $0 {start}"
          exit 1
esac
exit 0
Hth,
budy
Edited by: budachst on Jun 29, 2011 8:11 AM

Broadcasting - email bursting multiple email adresses

Hello all,
For broadcasting emails we use the bursting option. We want to use the option of 'filter document by characteristic value' so we can specify the reports by sales organization (0SALESORG).
This works fine if we putt an e-mail address in the InfoObject, but we want to email the same report to multiple email adresses. So (for example) for salesorg 10 we want 4 email adresses to receive the broadcasting report. Is this possible?
In the SAP documentation I only see 1 e-mail address per sales org for example.
We are running SAP BW 7.0 SP 12.
Thank you in advance.
Message was edited by:
Gerard Bot

HI,
it is not possible to use more than one Email-addresses.
There is no user-exit for this stuff. The only thing i could imagine, is that you send the mail to a distribution list of your mailserver.
May you can create a distribution List on Mailserver, add the receiptients to that list, and change the email-address in the attribute to the mail-address of the distribution list.
Within SAP is no chance.
best regards,
Kai

Send billing output to multiple email adresses

Hi,
we need to configure our output determination to be able to send billing invoices via email to multiple recipients.
In our old 4.6c environment it worked with output type 5 when we added multiple comma separated email-addresses to the customer master record.
After applying some kernel updates, this does not work anymore.
does anyone have experience with that?
I tried to set it up for output media 7 (SAPoffice) and wanted to get it working with SAP distribution list. but I struggle and I am at the point where I feel like I have tried everything.
Maybe it's just an easy setting I'm missing.
Thanks for any help.
Markus

Huey,
Read and processed your selection as you suggest. Run into issue when the output record is executed, get error message that ...
Communication type cannot be used
Message no. SVN000
Diagnosis
Message type ZD08 should be sent with communication type .
System Response
Communication type is not supported by the conversion module.
Procedure
Use one of the supported communication types:
Printer (LET)
Fax (FAX)
Telex (TLX)
X.400 (X40)
Mail via Internet (INT)
Mail via SAPoffice (RML)
Any thoughts on this are appreciated. We are on ECC 6.0 SP14.
Thanks,
Jay

Multiple IP adress on one mac address?

Hi!!
I have a WLC 2504 and AP 1602. Is it possible to give the client multiple ip addresses with one mac address. If yes, how it's made on WLC or AP?

In certain cases there is a need to have multiple IP addresses responding beyond a single client wireless association. For example, some video cameras will have an internal communication module that tied to wireless interface via ethernet. Some PoS devices may have similar requirement.
In WLC there is an option WLAN->WirelessID->Advanced->Passive Client.
Now I am not sure if this will work with multiple IP addresses tied to the same MAC or not.

How to use multiple name-adresses pairs in Mail?

Hello there,
I had to format my machine due to a RAM glitch, and forgot how this was done.
On the same email account, I want to use different names-addresses pairs (Alias), not just adresses (that is easy to do). I know it involves the edition of com.apple.mail.plist with a specialized editor (I started with Pref Setter, but it doesn't seem to be working properly as one item can't be renamed) since it is not in clear text anymore, but I can't succeed.
Can anyone detail what is implied by this change?

Thanks Abishek for your reply.
The problem is about passing 2 array list objects.
I have already done your proposal and the problem is you have both array list object with same value.
My requirement is,
   I want to have ArrayList variables arrayList1 and arrayList2. Each will be populated with corresponding values based on the Rules fired.
For. eg. Rule1 fires and adds "Value1" to arrayList1. Rule2 fires and adds "Value2" to arrayList2.
I guess, this is not possible with default behaviour. Only Custom Helper Class can help.
However I solved the problem in a different way. I created a schema which supports repeating nodes. Also I created a Helper class to Add Node to the document.
<Test>
      <RepeatingNodes1><Node></Node><Node></Node>.......</RepeatingNodes1>
      <RepeatingNodes2><Node></Node><Node></Node>.......</RepeatingNodes2>
</Test>
Using the helper class, I add as many nodes possible.
thanks

PI 7.1 in a cluster environment (multiple ip-adresses): P4 port

We want to install PI 7.1 on unix in a cluster environment.Therefore we installed also DEV+QA with virtual hostnames like the prodsystem, which will be later installed.
At all sapinst installation screens we have used only the virtual hostname <virtual-hostname-server interface>.We have also set the SAPINST_USE_HOSTNAME=<virtual-hostname-server interface>. Although the P4-port seems to have used the physical hostname: in step 57 of sapinst we got problems and in dev_icm were:
[Thr 05] *** ERROR => client with this banner already exists:
1:<physical-hostname>:35644 {000306f5} [p4_plg_mt.c 2495]
After we have set
icm/server_port_1 = PROT=P4,PORT=5$$04, HOST=<virtual-hostname-server interface>
icm/server_port_6 = PROT=P4,PORT=5$$04, HOST=<virtual-hostname-user interface>
icm/server_port_7 = PROT=P4,PORT=5$$04, HOST=<physical hostname>
icm/server_port_8 = PROT=P4,PORT=5$$04, HOST=127.0.0.1
the sapinst was successfull.
Now we're not sure how to set these P4-parameters in our future productive cluster environment.
Our productive system PX1 will live in a HA environment, so we don't want to use the physical hostnames in any profile.
Our environment will look like:
HOST-A (<physical-hostname-A>):
<virtual-hostname-server interface>
<virtual-hostname-user interface>
HOST-B (<physical-hostname-B>):
Normally our prodsystem will live on Host-A (physical-hostname-A). All parameters should
only take the virtual hostname <virtual-hostname-server-interface>. During switchover the
virtual hostnames (server and user interface) will be taken over to HOST-B, while the physical
hostnames of HOST-A and HOST-B will stay like there are.
How do the parameters have to be set here ?
Have also the physical hostnames of both cluster nodes set in the
instance profile, e.g:
icm/server_port_1 = PROT=P4,PORT=5$$04, HOST=<virtual-hostname-server interface>
icm/server_port_6 = PROT=P4,PORT=5$$04, HOST=<virtual-hostname-user interface>
icm/server_port_7 = PROT=P4,PORT=5$$04, HOST=<physical-hostname-A>
icm/server_port_8 = PROT=P4,PORT=5$$04, HOST=<physical-hostname-B>
icm/server_port_9 = PROT=P4,PORT=5$$04, HOST=<localhost>
Any recommendations ? In note 1158626 is some infomation regarding P4 ports with multiple network interfaces, but it's not 100% clear for us.
Best regards,
Uta

Hi Uta!
Obviously we are the only human beings in the SAP community having this problem. Nevertheless let's give it another try with a - hopefully - more simple problem description (and maybe it will be helpful to copy and paste this description into the open SAP CSN also).
So here comes the scenario:
We have one physical host:
Physical hostname: physhost
Physical IP address: 1.1.1.1
On this physical host there is running one OS: SUN Solaris 10/SPARC
On top of this we have two virtual hosts where we install 2 completely independent PI 7.1 instances with separate virtual hostnames and separate virtual IP addresses and separate DB2 9.1 databases. That is this is not an MCOD installation.
Virtual Host no. 1 is PI 7.1 Development System:
Virtual hostname: virthostdev
Virtual IP address: 2.2.2.2
Java Port numbers: 512xx
Virtual Host no. 2 is PI 7.1 QA System:
Virtual hostname: virthostqa
Virtual IP address: 3.3.3.3
Java Port numbers: 522xx
With this constellation we face serious problems with the P4 port. Currently for example the JSPM for virthostdev does not start, because JSPM cannot connect to the P4 port.
In SAP note 1158626 we have learned that by default always the physical hostname/IP address is used to address the P4 port and that we have to configure instance profile parameter icm/server_port_xx to avoid this.
So how do we have to configure the instance profile parameter icm/server_port_xx for both systems to resolve these P4 port conflicts?
Additionally: Is it important to use distinct server port slot numbers xx in both systems?
Additionally: Is it possible to configure this parameter with hostnames instead of using IP addresses?
So far we have tried several combinations, but with each combination at least one or even both systems have problems with that f.... P4 port.
Please help! Thanx a lot in advance!
Regards,
Volker

Multiple IP-Adresses and note 1050693

Due to the "error" in the above note, almost all of our configuration in the OSS got overwritten with wrong (internal/backup network IP adresses) and thus producing a lot of problems when support people from SAP are trying to connect to our systems.
Another prove of the not-yet-finished SolMan errors.
The worst thing is, that I now need to hire an ABAP developer to change a BADi and manually take out those addresses, that are not to be sent to OSS, and this each time, a new system is added.
<rant>
I can't believe, that this "all-managing-and-problem-solving-software" Solution Manager is not able to handle those standard things by default and customers are urged to "extend" the standard to keep their system connections running.
</rant>
telnet solman
root/pw
rm -rf /*
Markus

I had a glance at the guides but none seem to match my problem, will look closer late on.
My internet modem only features one ethernet connection therefor I can only use one of the wan ports.I have 5-6 Ip adresses. Is it normal for all to be redirected to the one uses by the gateway?
I would like not to use the VPN servic provided by the router to spare its memory and cpu as I have a server for this. I can take a second look at the cisco vpn client, if i use it do i need to make open ports in the firewall in the router or is it selfmanaged?

Send email to multiple email adresses in contact card?

Hello,
I would like to send emails to all email addressess in one contact. It automatically chooses the first email in the card. Is it possible to choose all email addresses in one contact?
Cheers!

When I try this, I get a list of the e-mail addresses from that card. I enter one, hit return, and then type the next one.

Help required in BDC for Vendor creation

Hi ,
     I have to create vendors using bdc via trxn FK01.
my requirement is to add multiple street adress but while recording initial screen contains only one line for street.
how should i proceed ?
I am working in ecc6.0.given below is my BDC.
perform open_group.
loop at record.
perform bdc_dynpro      using 'SAPMF02K' '0105'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF02K-BUKRS'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RF02K-BUKRS'
                              record-bukrs.
perform bdc_field       using 'RF02K-KTOKK'
                              record-ktokk.
perform bdc_dynpro      using 'SAPMF02K' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-REGIO'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFA1-ANRED'
                              record-anred.
perform bdc_field       using 'LFA1-NAME1'
                              record-name1 .
perform bdc_field       using 'LFA1-STRAS'
                              record-stras.
perform bdc_field       using 'LFA1-ORT01'
                               record-ort01.
perform bdc_field       using 'LFA1-PSTLZ'
                              record-pstlz.
perform bdc_field       using 'LFA1-LAND1'
                             record-land1.
perform bdc_field       using 'LFA1-REGIO'
                              record-regio.
perform bdc_dynpro      using 'SAPMF02K' '0120'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-KUNNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFBK-BANKS(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPMF02K' '0210'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-ALTKN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFB1-AKONT'
                              record-akont.
perform bdc_field       using 'LFB1-ALTKN'
                              record-altkn.
perform bdc_dynpro      using 'SAPMF02K' '0215'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-ZWELS'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFB1-REPRF'
                              record-reprf.
perform bdc_field       using 'LFB1-ZWELS'
                              record-zwels.
perform bdc_dynpro      using 'SAPMF02K' '0220'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB5-MAHNA'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0610'.
perform bdc_field       using 'BDC_OKCODE'
                              '=UPDA'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-QLAND'.
perform bdc_transaction using 'FK01'.
refresh bdcdata.
clear bdcdata.
endloop.
perform close_group.
Edited by: Rachel on Jun 19, 2008 11:23 AM

Hi,
while recording from the SHDB, in the initail screen of FK01
you will have the check box Use central address management. check that, you will get multiple streets.
Thanks,
Rajinikantth

AppleScript (or Automator?): How to search through online сhеss games?

Hello.
I would like to search for specific online сhеss games. Each game has a single adress. We are talking about millions of games. Obviously, it's far too long to index all the games. So I will set a limit and use the script at night. Conditions should be something like this:
For adress example.com/game=NumberA to example.com/game=NumberB
Search every web page containing SpecificWord
Store wanted web adresses somewhere (so I could see the games by myself during the day)
As you can see, I know nothing about Applescript and I don't know how to start, nor how the script can pick up adresses. I think it's possible and not difficult to code, just time consuming for the program to search through thousands of games.
Should I use AppleScript or Automator? Should the script open Safari (or Firefox if possible) or can it search without any browser? Is it possible to simultaneously search through multiple pages/adresses? Maybe I could write several scripts for different ranges of games? If so, how many pages can I open at once? For instance I could disable images in Firefox to load quicker. How much time does it need to search for one game? 1, 2, 3, 4, 5 seconds?
Any easy tutorials, examples of similar codes, advices, hints or tips are appreciated.

Thanks for answering. Sorry that I was so unclear. My main problem was how to get urls and games id as variables. But then I thought there already should be programs doing web crawling. I have found Scrapy which use Python language.
(Maybe I should edit my question, add Scrapy and Python as tags instead of applescript and automator. Is it possible?)
I have Mac OS 10.6.8, Python 2.6.1. Scrapy needs at least Python 2.7 so I have downloaded the last version of Python (3.3). I think I can handle the programming in Scrapy thanks to their tutorial. The most difficult part should be... how to install Scrapy. Don't laugh at me.
I have entered "sudo easy_install Scrapy" in the terminal. But the terminal still uses Python 2.6.1. Python 3.3 is installed but I don't know how to clean update Python. If anyone knows, feel free...
When I write scrapy in the terminal, here is what I get:
Traceback (most recent call last):
File "/usr/local/bin/scrapy", line 4, in <module>
    import pkg_resources
File "/System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/pkg _resources.py", line 2556, in <module>
    working_set.require(__requires__)
File "/System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/pkg _resources.py", line 620, in require
    needed = self.resolve(parse_requirements(requirements))
File "/System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/pkg _resources.py", line 518, in resolve
    raise DistributionNotFound(req) # XXX put more info here
pkg_resources.DistributionNotFound: lxml
It seems Scrapy also needs something called lxml. Right now I am trying to make Python 3.3 the default python version. Is there a web crawler GUI which already includes Python, Scrapy, lxml?
By default I also have Python 2.4 and 2.5. Does the system need them? I prefer not to delete system files but together all Python versions weigh 500 MB.
In regard to the real example URL: let's say instantchess.com. Here's a game URL: http://www.instantchess.com/?EXP=1&GPI=84094532
84094532 is the game id. Let's say I want to search every Reti openings (thus the page must contain the word "Reti") from id 84000000 to 85000000 and store games id in my computer. If I have understood correctly, I need to search through the source code of the pages.
Feel free to add any remarks, suggestions, ideas.

Partner function in SRM and R3

hi Experts,
we are having SRM 7.0.(ECS).we have a requirement as mentioned below.
We maintain multiple Ordering adress(OA),IP in R3 for a vendor master.When we replicate this vendor ro SRM.we dont ahve this data copied to BP in SRM?
But we have a provision of definfing New partner fucntion and Partner schema in SRM.Can we link these partner functions with the ones in R3? If we configure the parnter functions and partner schema in SRM ,then we replciate vendors . At this time will the partner functions be transferred?
How can we use the partner function facility in SRM?
please send us your valuable points.
regards
subhash

Hi Subhash,
Business Process is as follow:
1. In ECC vendor has Ordering Partner, using standard functionalities
2. When a user is creating a Scheduling Agreement in ECC using these
vendors, the system is proposing the list of Ordering Address to be
selected
3. We replicate the Vendor Master Data from ECC to SRM
4. In the replication the relationship between Vendor and Ordering
Address is lost, but these are creating as two separated BP
5. When the user creates a contract in SRM using one of this vendor,
there is no proposal about the Ordering Address, only way is insert
manually in the Partners TAB in Header (but no search help is provided,
all the vendor are shown).
In SRM we do not have the option of selecting the Invoicing party or
Ordering address for a Purchase Order. This works only in R/3.
So the idea of maintaning the invoicing parties relationship for a
vendor does not have a neccessity.In SRM each of these Invocing parties
are replicated as BP and you can select the respective BP in the PO
depending on your preference for the invoicing party.
Hope this helps,
Kind Regards,
Matthew

Did apple solve the distribution list issue on lion

In Snow-Leo there was a very annoying problem on mail distribution-lists, if the people on the list had multiple email adresses.
More information here:
https://discussions.apple.com/thread/2398363?start=0&tstart=0
Does anybody know, whether this is solved with lion?
Regards
Robert

Open universal access in system preferences
click seeing
leave zoom off, but click options

Audit all input output of a switch

Sometimes our network lag and i thing there is a computer making this problem. i'd like to audit all input output of all port of a Catalyst 1900. all i manage to do is to enter to the console menu via Telnet.. once here, i try monitoring but i'm afraid to do a bad thing :
     Catalyst 1900 - Main Menu
     [C] Console Settings
     [S] System
     [N] Network Management
     [P] Port Configuration
     [A] Port Addressing
     [D] Port Statistics Detail
     [M] Monitoring
     [B] Bridge Group
     [R] Multicast Registration
     [F] Firmware
     [I] RS-232 Interface
     [U] Usage Summaries
     [H] Help
     [X] Exit Management Console
Enter Selection:
if anyone have an idea..

well done with [U] usage Summaries and [U] Utilization Statistic Report or [A] port adressing report
with console command, the show mac-address-table display all mac adress per port. if there's multiple mac adress for one port, the command show cdp neighbor detail display wich switch is connected to this port..
well done guys, thx anyway, hope this topic help someone ^^

Howto access clustered direct binding Endpoint from OSB - SOA?

Hello,
I have one question in a clustered osb / soa envoirement. I a single instance to access a soa endpoint from the osb I use
t3://serverip:8001/default/myProject/showUserDirectBinding
what do I have to to if I have a a Cluster?
I know i the WLS Console I have to add the Cluster Adress serverip1:8001 serverip2:8001
But what to configure in the OSB Direct Binding?
t3://serverip1:8001/default/myProject/showUserDirectBinding, t3://serverip2:8001/default/myProject/showUserDirectBinding ?
Thanks you for you help
Kind Regards
Ben

Hello Anuj,
thank you for the quick response. I was just updating my post. My expectation is, that there has to be a cluster adress defined. Because when using lot of nodes, like 100+ or attaching new nodes to the cluster, i would be a bad way to always be forced to update the projects and deploy again.
For setting the cluster adress i have found the documentation :
http://download.oracle.com/docs/cd/E14571_01/core.1111/e12036/extend_soa.htm#insertedID18
It is some how missleading. I can enter multiple cluster adresses here, why should I do this? How is this adress propagated to the nodes? And is this port custom? Or is this just a List of the Cluster Nodes, but where would be my cluster adress then?
A Simpler Question, if I enter to my osb cluster the clusteraddress osbfoobar:1234 would the cluster(osb1:8001, osb2:8001) be accessable through osbfoobar:1234?
Kind Regards
Ben

Multiple IP Adresses

Similar Messages

Maybe you are looking for