Multiple languages in flat file

HI,
I m trying to load data throw flat file, how i can load the multiple languages into bw. i mean spliting in bw.
while loading throw r/3 data , one check box will be enable in bi side ( multiple languages), what about flat file.

hi,
I m not asking where i have to maintain language in flat file ? i m asking while extracting the flat file data, we can see one multiple language option, it's disable mode in flate file, i given in flat file EN,GE it's have split in bw side, for unicode testing...

Similar Messages

Multiple IDocs - XI - Flat file

We are looking at a scenario to send multiple IDOCS from SAP to Flat File. We implemented this using the Collect Pattern in BPM, merge all the IDocs into a single message and write it in a file. But is there any a way to avoid BPM and still be able to send multiple IDOCS in a package to be written onto one file?
Thanks
Vinoda

Hi,
I think this is possible using PACKAGING.
Check this note <b>814393</b> on Service Market Place.
<i>You want to create or process an XI message with multiple instances of an IDoc (of the same IDoc or extension type) in the mapping.
The payload of the relevant message is to have the following the format:
<IDOCTYP>
<IDOC>...</IDOC>
<IDOC>...</IDOC>
</IDOCTYP>
To be able to process these messages in the message mapping of the source system and to create them in the target system, you need an XML schema for the IDOC that allows multiple instances of the IDOCtag.
If the relevant IDOC is imported into the Integration Repository, the system generates an XML schema that sets the number of instances of the IDOC tag to exactly one.
The following describes how you can manually change the XML schema so that multiple instances of the IDOC tag are allowed, and how you can make the modified XML schema available to an adequate message mapping.
Other terms
IDoc packaging
Reason and Prerequisites
The relevant IDoc is imported into the Integration Repository.
Solution
1) Log on to the Integration Repository.
2) Open the relevant IDoc in the object editor.
3) Select the "Export XSD" menu option in the "Tools" menu.
4) In the subsequent dialog box, assign a file name and save the data to the hard disk of your local PC.
5) Open the file that you have saved in step 4 in an adequate editor (for example, Notepad) for editing.
6) Locate the first entry: <xsd:element name="IDOC" type="<
Idocname>"> and add the following expression, maxOccurs="unbounded", between the value of the type attribute and the closing angular bracket.
Example:
<xsd:element name="IDOC" type="ADR2MAS.ADR2MAS02"
maxOccurs="unbounded">
7) Save the modified file to the hard disk of your local PC.
8) In the message mapping, use the file saved in step 7 instead of the imported IDoc by using the "Import XML or XSD" function in the mapping tool to select the source or target messages.
</i>
Regards,
Bhavesh

Error while trying to process multiple Recordsets in Flat file.

Hi All,
I am working on Flat File to Flat File scenario and my structure is as follows.
Recordset
     Record1
          Field1
          Field2
     Record2
          Field3
          Field4
     |
     Record9
          Field5
          Field6
     I am going to receiver multiple Recordsets from my input and need to pass them as output flat file after doing some manipulations in mapping(I am using Java mapping).
     In Moni I am able to see multiple Recordset XMLs created but the message is failing in receiver communication channel with error
"Failed to process message content. Reason: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)' (Software version: 3.0.1)"
     When I am trying to pass Single Recordset I am able to see the output, but when I am trying with multiple Recordsets it is throwing error.
     Can anybody help me in finding the root cause to this problem.
     My Receiver channel Content conversion is as follows.
     RecordsetStructure: Record1,Record2, -- - - ,Record9
          Record1.fieldFixedLengths
          Record1.fieldNames
          Record1.endSeparator so on till Record9
Regards,
Jayaram.G

You might want to check the following things
Are u specifying field names,separators for Record1,Record2..Record9.
Is you occurence repeats after record1..record9 again?
Change your structure occurence as per the runtime data you provide..
See whether your java mapping modifies the structure that does not match with fcc configuration. You might want to pay attention over there too.

Script or command line to comment out multiple lines in flat files

I am looking for a way to go through multiple flat files within the same directory for the occurance of a server name and if found to insert a comment (#) at the beginning of the line. Currently, I am grepping for the server name within the directory and then doing a vi on each individual flat file to comment out the line. The server name is separated by the pipe (|) symbol and each line of every file is in this format:
webservers:WEBSERVER|Env Name|servername|application name
So, in the above, I am grepping for the servername part and if found in there, I want to change the line to:
#webservers:WEBSERVER|Env Name|servername|application name
I would think there would be a way of doing this either with command line Perl or with maybe awk or sed. Any suggestions would be greatly appreciated.

You could do something like this with a ksh shell script:
#!/usr/bin/ksh
for file in `ls`; do
echo $file
sed 's/^webserver/#webserver/g' $file > $file.parsed; mv $file.parsed $file
doneThis will go through everyfile in the directory and search for "start of line" webserver and replace it with "#webserver". Then the file will get move back to the original file name.
If you just want to change certain files ie. only filenames with the word "server" in it, then change:
for file in `ls`; do to something like
for file in `ls *server*`; doHope this help...
Cheers
pdaemon

Multiple idoc to flat file

Hi,
i have a scenario from idoc to flat file.There is two idoc that send message in same file.Without flat file content messages come succesfully.the format should be following:
at the first row should be the first idoc,
at the second row should be the second idoc
01 1FONEX0045               FONEX0045               FONEX SIVI SABUN 400+850ML FLOWERS                    =>1.idoc
02 1FONEX0045               8691988000162           8691988000162                                                             =>2.idoc
01 1DOVE0199                DOVE0199                   DOVE SAC DOKULMELERINE COZUM SAC BAKIM M     =>1.idoc
02 1DOVE0199                8718114638348           8718114638348                                                               =>2.idoc
Thanks in Advance
Nurhan

Hi,
You have to MessageTransformBean Module.
The MessageTransformBean module enables conversion of XML files to flat files and vice versa. You can use this module in the sender and receiver communication channels.
In receiver communication channel, specify MessageTransformBean module before standard adapter module CallSapAdapter and use
Module Name: localejbs/AF_Modules/MessageTransformBean
Module Key : XML2Plain
Please see the below links, it might be useful to you.
/people/gabrielsagayaselvam.panneerselvam/blog/2009/12/07/standard-adapter-framework-modules-afmodules-in-pi-71-150part-2
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/frameset.htm
Regards,
P.Rajesh

Down Loading of data in Japanese Language from SAP R/3 30F to Flat file

Hi All,
We need to Extract the data (like MM ,SD, FI, CO Modulus for reporting purposes) which is in Japanese from the R/3 30F to Flat file and the Upload from flat file to BW 3.5
When we try to down load some sample records ,the Japanese Characters coming as boxes.
Can anyone Suggest how to Extract the Data in japanese Language into Flat file ,
and also are there any standard Extractors Available to extract all MM,FI, CO SD ..etc so that we can use them...
Please give some solution to above problem
Thanks&Regards
Ranga Rao

Hi,
I have no idea about this.
I have read some document after seeing your question.
may be helpful for you.
check the below link.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5411d290-0201-0010-b49b-a6145fb16d15">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5411d290-0201-0010-b49b-a6145fb16d15</a>
Regards,
Vijay

Loading multiple flat file at a time.

hi experts,
I am having 15 flat files with same data structure.so how do i load all the fileswith out creating 15 info packges .
( say all the files are on the desktop.)
I had seen the option that ABAP code an be written in info package in extraction tab.
Can any one share me the abap code
Regards
Laxman.

You can write dynamic code using ABAP if your number of flat files are not fixed...but if you have to 15 flat files always just creating multiple infopackages.
For code, you have to store file names/name pattern in some table and reading it at run time. You can use function modules starting with BAPI_IPAK* to create/change/start template IP like BAPI_IPAK_START. You can set IP parameters at run time using FM RSBATCH_MAINTAIN_PAR_SETTINGS.
Kamaljeet

How to load multiple flat files

Hi,
I am new to ODI 10, I have one requirement where I need load flat files containing the folder size11GB.
I want to load them all in a single instances with using of single data server, single physical schema and single logical schema.
How can we do this.
Also to execute this in package what steps and precautions do we need to follow.
Thx

Is the data in your files the same format?
If so, simply follow one of the many guides to looping around files that use a common structure to load them, you can do this in parallel if you want.
http://odiexperts.com/multiple-files-single-interface/
or
http://www.odigurus.com/2011/05/multiple-files-single-target-table.html

BizTalk Mapper - Looping multiple nodes to map to a single node in a single row (flat file)

Hi everybody,
I'm still new in developing BizTalk app and require some help in this one problem. Appreciate your time and input to help me on this.
Basically I have an XML document as input and a flat file as output. Example for input is as per below. The "Contact" node's maxOccurs here is set to unbounded and could be multiple. (phone, fax, website, telex ...)
<root>
<CustomerName>Company A</CustomerName>
<Contact>
<Type>Phone</Type>
<Locator>03566789</Locator>
<Type>Phone</Type>
<Locator>03566790</Locator>
<Type>Fax</Type>
<Locator>03566795</Locator>
<Type>Telex</Type>
<Locator>03566798</Locator>
<Type>Website</Type>
<Locator>www.companyA.com</Locator>
</Contact>
</root>
The expected output in XML would look like below. The final outcome would be a csv file. Strictly Phone 1, phone 2, fax and telex, the rest would be ignored.
<root>
<CustomerName>Company A</CustomerName>
<Phone1>03566789</Phone1>
<Phone2>03566790</Phone2>
<Fax>03566795</Fax>
<Telex>03566798</Telex>
</root>
Example of expected output result (csv file): CompanyName;Phone1;Phone2;Fax;Telex;
In our case here: Company A;03566789;03566790;03566795;03566798;
Another example could be: Company B;036778911;;036778912;; if only 1 phone number and 1 fax number provided.
I've used Table Looping and Table Extractor and nearly got the desired result except that it is represented in multiple rows instead of one: Example:
Company A;03566789;;;
Company A;;03566790;;;
Company A;;;03566795;;
Company A;;;;03566798;
Any idea how to do the mapping? I'm kind of stuck here and it sounds like an easy problem but i could not find any example to the solution that I need here. Table looping and table extractor is ok to map from single node flat file to multiple nodes but not
the reverse like in this example.
rgds,
sportivo

Hi,
Please refer to below links where similar issue has been answered.
http://social.msdn.microsoft.com/Forums/en-US/biztalkgeneral/thread/ecdff241-6795-4a95-bad7-48fca4410dfb
http://www.epinaki.com/2011/05/other-options-to-using-biztalk-table-looping-functoid-par-i/
I hope this helps you.
Thanks With Regards,
Shailesh Kawade
MCTS BizTalk Server
Please Mark This As Answer If This Helps You.
http://shaileshbiztalk.blogspot.com/

How to genereate multiple IDOCs from multiple rows in a single flat file

HI,
I am working on a scenario where I need to genereate a IDOC per one row in a flat file.
I created DT of following strcuture:
DT_TYPE
--DETAILS -
0..Unbound
F1------0..Unbound
F2------0..Unbound
F3------0..Unbound
IDOC is
ZIDOC
IDOC----1..1
-BEGIN-Required
-SEGMENT1---1..1
-SEGEMENT2-1..1
-SEGMENT3-1..999
To create multiple IDOCs if there are multiple rows in a flat file in MM i choosed occurances as 0..unbound in Signiture tab
Source structure:
Messages------1...1
-Message1--1....1
DT_TYPE------0..Unbound
DETAILS -
0..Unbound
F1------0..Unbound
F2------0..Unbound
F3------0..Unbound
Target Strcuture:
Messages----1....1
-Message--1....1
ZIDOC----1....1
IDOC------1..1
BEGIN---Required
SEGMENT1-----1..1
SEGEMENT2---1..1
SEGMENT3---1..999
I am unable to generate two IDOCs if there are two rows:
Am I missing some thing?
Thanks
Rajeev

HI,
I am working on a scenario where I need to genereate a IDOC per one row in a flat file.
I created DT of following strcuture:
DT_TYPE
--DETAILS -
0..Unbound
F1------0..Unbound
F2------0..Unbound
F3------0..Unbound
IDOC is
ZIDOC
IDOC----1..1
-BEGIN-Required
-SEGMENT1---1..1
-SEGEMENT2-1..1
-SEGMENT3-1..999
To create multiple IDOCs if there are multiple rows in a flat file in MM i choosed occurances as 0..unbound in Signiture tab
Source structure:
Messages------1...1
-Message1--1....1
DT_TYPE------0..Unbound
DETAILS -
0..Unbound
F1------0..Unbound
F2------0..Unbound
F3------0..Unbound
Target Strcuture:
Messages----1....1
-Message--1....1
ZIDOC----0....unbound
IDOC------1..1
BEGIN---Required
SEGMENT1-----1..1
SEGEMENT2---1..1
SEGMENT3---1..999
I am unable to generate two IDOCs if there are two rows:
Am I missing some thing?
It isnt possible with out BPM?
Thanks
Rajeev

Loading Multiple Flat File in to BI System with one InfoPackage

Greetings,
i have developed a routine to Load Multiple Flate File in one InfoPackage, but it doesn't work. Only the Last File are loaded. Who can Help me?
Loading 'R:\Verzeichnis \ing_wan_b_002.fall.csv' to 'R:\Verzeichnis \ing_wan_b_240*.fall.csv'
Routine:
DATA: VerzUndDateiname TYPE string value 'R:\Verzeichnis \ing_wan_b_000.fall.csv',
      VerzUndDateinameKomplett TYPE string,
      count TYPE i value 2,
      countN(3) TYPE n.
WHILE count <= 240.
countN = count.
VerzUndDateinameKomplett = VerzUndDateiname.
REPLACE '000' WITH zaehlerN
              INTO VerzUndDateinameKomplett.
p_filename = VerzUndDateinameKomplett.
count = count + 1.
ENDWHILE.
Best Regards
Jens
Edited by: JB6493 on May 18, 2009 1:03 PM
Edited by: JB6493 on May 18, 2009 1:07 PM

Hello Jens,
you have to process the InfoPackage 239 times. Your routine would be executed once during one processing of the InfoPackage. This would run the WHILE statement and end up with the last filename after 239 iterations.
Either try to concatenate the files you want to load (if possible) and load them in one go. Alternatively you could try to use a process chain to run the InfoPackage 239 times.
Kind regards,
Christoph

Loading Multiple Flat File around 80+

Hi,
Loading multiple flat file in to BI system.
My issue: I got a scenerio of loading multiple i.e., 80+ flat file into BI system every month and my client want it to be done through process chain r automation with out manual intervention.
Can any one suggest me how can i achiev this one.
Regards,
Prabhakar.

Hi All,
We have developed a logic to upload multiple flat file at a time i.e., .CSV file. Please find below is the logic regarding that routine.
*+ program filename_routine.
Global code
$$ begin of global - insert your declaration only below this line -
Enter here global variables and type declarations
as well as additional form routines, which you may call from the
main routine COMPUTE_FLAT_FILE_FILENAME below
data : v_filename type string.
data : v_foldername type string.
data : v_uploadfile type string.
data: v_download_file type string.
data : v_ext(4) type c.
data : v_FILE_EXISTS type c.
data : v_file type DXFILE-FILENAME.
data : v_count(3) type c.
data : v_length type i.
TYPES: BEGIN OF TY_file,
        LINE(900),
      END OF TY_file.
DATA: GIT_file TYPE TABLE OF TY_file.
$$ end of global - insert your declaration only before this line   -
form compute_flat_file_filename
using    p_infopackage type rslogdpid
           p_datasource   type rsoltpsourcer
           p_logsys       type rsslogsys
changing p_filename     type RSFILENM
           p_subrc        like sy-subrc.
$$ begin of routine - insert your code only below this line        -
This routine will be called by the adapter,
when the infopackage is executed.
v_count = 1.
*---- As per the folder location of the files & system we have to change
*the path fo the folder in the below variable i.e., 'c:\............
v_foldername =
'C:\Documents and Settings\Prabhakar-HP\Desktop\test\'.
*---- As per the Prefix of the files like 'CSI_01_..' we have change the
*prefix if required in the below variable i.e., 'CSI_01_..', IF REQUIRED
*OR IF WANT TO CHANGE THE PREFIX TO SOME OTHER.
v_filename = 'CSI_01_'.
v_ext = '.csv'.
condense v_count.
concatenate   v_foldername
                v_filename
                v_count
                v_ext       into v_uploadfile.
v_file = v_uploadfile.
CALL FUNCTION 'DX_FILE_EXISTENCE_CHECK'
    EXPORTING
      FILENAME       = v_file
      PC             = 'X'
    IMPORTING
      FILE_EXISTS    = v_FILE_EXISTS
    EXCEPTIONS
      RFC_ERROR      = 1
      FRONTEND_ERROR = 2
      NO_AUTHORITY   = 3
      OTHERS         = 4.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
while v_FILE_EXISTS = 'X'.
    v_file = v_uploadfile.
    CALL FUNCTION 'DX_FILE_EXISTENCE_CHECK'
      EXPORTING
        FILENAME       = v_file
        PC             = 'X'
      IMPORTING
        FILE_EXISTS    = v_FILE_EXISTS
      EXCEPTIONS
        RFC_ERROR      = 1
        FRONTEND_ERROR = 2
        NO_AUTHORITY   = 3
        OTHERS         = 4.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
      WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    if v_file_exists = 'X'.
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          FILENAME                = v_uploadfile
          FILETYPE                = 'ASC'
          HAS_FIELD_SEPARATOR     = 'X'
        TABLES
          DATA_TAB                = GIT_file
        EXCEPTIONS
          FILE_OPEN_ERROR         = 1
          FILE_READ_ERROR         = 2
          NO_BATCH                = 3
          GUI_REFUSE_FILETRANSFER = 4
          INVALID_TYPE            = 5
          NO_AUTHORITY            = 6
          UNKNOWN_ERROR           = 7
          BAD_DATA_FORMAT         = 8
          HEADER_NOT_ALLOWED      = 9
          SEPARATOR_NOT_ALLOWED   = 10
          HEADER_TOO_LONG         = 11
          UNKNOWN_DP_ERROR        = 12
          ACCESS_DENIED           = 13
          DP_OUT_OF_MEMORY        = 14
          DISK_FULL               = 15
          DP_TIMEOUT              = 16
          OTHERS                  = 17.
      IF SY-SUBRC <> 0.
       MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      elseif sy-subrc = 0.
**----- As per the REQUIRMENT, want to change the down loading file
*path means we have to change the path in the below variable i.e.,
*'c:\.......
v_download_file =
'C:\Documents and Settings\Prabhakar-HP\Desktop\test\satheesh.CSV'.
        CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            FILENAME                = v_download_file
            FILETYPE                = 'ASC'
            APPEND                  = 'X'
          TABLES
            DATA_TAB                = git_file
          EXCEPTIONS
            FILE_WRITE_ERROR        = 1
            NO_BATCH                = 2
            GUI_REFUSE_FILETRANSFER = 3
            INVALID_TYPE            = 4
            NO_AUTHORITY            = 5
            UNKNOWN_ERROR           = 6
            HEADER_NOT_ALLOWED      = 7
            SEPARATOR_NOT_ALLOWED   = 8
            FILESIZE_NOT_ALLOWED    = 9
            HEADER_TOO_LONG         = 10
            DP_ERROR_CREATE         = 11
            DP_ERROR_SEND           = 12
            DP_ERROR_WRITE          = 13
            UNKNOWN_DP_ERROR        = 14
            ACCESS_DENIED           = 15
            DP_OUT_OF_MEMORY        = 16
            DISK_FULL               = 17
            DP_TIMEOUT              = 18
            FILE_NOT_FOUND          = 19
            DATAPROVIDER_EXCEPTION = 20
            CONTROL_FLUSH_ERROR     = 21
            OTHERS                  = 22.
        IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        refresh git_file.
      ENDIF.
    endif.
    if v_file_exists = 'X'.
      if p_subrc = 0.
        v_count = v_count + 1.
        condense v_count.
        concatenate
             v_foldername
             v_filename
             v_count
             v_ext into v_uploadfile.
      endif.
    else.
    endif.
endwhile.
v_uploadfile = v_download_file.
p_filename = v_uploadfile.
p_subrc = 0.
$$ end of routine - insert your code only before this line         -
endform. +*
Reagrds,
Prabhakar.

Create a flat file with multiple characters for enclosures

Hello,
we use OWB 11g2 (11.2.02).
Now we try to create a flat file with multiple characters for enclosures. The manual wrote:
"Enclosures (Left and Right): Some delimited files contain enclosures that denote text strings within a field. If the file contains enclosures, enter an enclosure character in the text box or select one from the list. The list displays commonenclosures. However, you may enter any character. The default for both the left and right enclosure is the double quotation mark ("). You can specify multiple characters and hexadecimal characters as field enclosures."
But it will not work. The OWB use the first character from the left enclosure definition as left enclosure and the second one as right enclosure !?!
Did anyone know this behavior? Is there a solution for this problem?
Thanks and regards
Norbert

HI Raghu,
Use the function module 'GUI_UPLOAD'.
In that you have to specify the field_separator value = 'X' in export section.
Regards,
S.C.K

BAPI_PO_CREATE1 not able to create PO's for multiple rows from the flat fil

Hi
i am uploading PO's from a flat file into SAP using the BAPI_PO_CREATE1. Everything works fine if the flat file hast only one record.
if the flat file has more than one record then while loading the second record the BAPI returns a error message. I am calling the BAPI in a loop.
The strange thing is that if i load the second record individually the program is able to create the PO. So only when i have multiple records in the flat file i am unable to load the PO into SAP. I debugged and checked all the internal tables passed to the BAPI. All seems to have the data correctly but still the BAPI fails.
any idea where i am going wrong?
the code looks something like this.
LOOP AT HEADER_ITAB.
   PERFORM FILL_HEADER_RECORDS.
LOOP AT ITEM_ITAB WHERE EBELN eq HEADER_ITAB-EBELN.
     PERFORM FILL_ITEM_RECORDS.
ENDLOOP.
PERFORM CERATE_PO_VIA_BAPI.
ENDLOOP.

What is the error message. Are you trying something like this:
    LOOP AT T_DATA1.
      AT NEW LIFNR.
        READ TABLE T_DATA1 INDEX SY-TABIX.
        PERFORM INIT_TABLES.
        PERFORM FILL_DATA.
--Call the BAPI to create PO
        PERFORM CREATE_PO.
      ENDAT.
    ENDLOOP.
FORM CREATE_PO .
CALL FUNCTION 'BAPI_PO_CREATE1'
    EXPORTING
      POHEADER                     =   POHEADER
      POHEADERX                    =   POHEADERX
    POADDRVENDOR                 =
    TESTRUN                      =
    MEMORY_UNCOMPLETE            =
    MEMORY_COMPLETE              =
    POEXPIMPHEADER               =
    POEXPIMPHEADERX              =
    VERSIONS                     =
    NO_MESSAGING                 =
    NO_MESSAGE_REQ               =
    NO_AUTHORITY                 =
    NO_PRICE_FROM_PO             =
   IMPORTING
     EXPPURCHASEORDER             = EXPPURCHASEORDER
     EXPHEADER                    = EXPHEADER
     EXPPOEXPIMPHEADER            = EXPPOEXPIMPHEADER
   TABLES
     RETURN                       = RETURN
     POITEM                       = POITEM
     POITEMX                      = POITEMX
    POADDRDELIVERY               =
     POSCHEDULE                   = POSCHEDULE
     POSCHEDULEX                  = POSCHEDULEX
     POACCOUNT                    = POACCOUNT
    POACCOUNTPROFITSEGMENT       =
     POACCOUNTX                   = POACCOUNTX
    POCONDHEADER                 =
    POCONDHEADERX                =
     POCOND                       = POCOND
     POCONDX                      = POCONDX
    POLIMITS                     =
    POCONTRACTLIMITS             =
    POSERVICES                   =
    POSRVACCESSVALUES            =
    POSERVICESTEXT               =
    EXTENSIONIN                  =
    EXTENSIONOUT                 =
    POEXPIMPITEM                 =
    POEXPIMPITEMX                =
    POTEXTHEADER                 =
      POTEXTITEM                   = POTEXTITEM
    ALLVERSIONS                  =
     POPARTNER                    = POPARTNER
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      WAIT   = 'X'
    IMPORTING
      RETURN = RETURN1.
DATA: L_NAME TYPE LFA1-NAME1.
CLEAR L_NAME.
SELECT SINGLE NAME1
           FROM LFA1
           INTO L_NAME
           WHERE LIFNR = POHEADER-VENDOR.
LOOP AT RETURN.
    WRITE : / RETURN-TYPE,
              RETURN-ID,
              RETURN-MESSAGE.
    WRITE : '--> For vendor:',
             POHEADER-VENDOR,
             L_NAME.
ENDLOOP.
ENDFORM.                    " CREATE_PO

Flat File-to-RFC question, multiple RFC calls for one file.

Hi guys,
I'm quite new to XI / PI and I have a question regarding a File-to-RFC scenario we're trying in NW PI 7.1.
We have a flat file which has two lines with two fields each, let's take this as an example :
001,001
002,002
The files needs to be converted to XML and then transferred to the RFC program which will update a table with the values above.
In the ESR I've created 3 data types (z_row1,z_record1 and z_fileinput1), 1 message type (z_file2rfc_ob_mt), 1 message mapping (z_file2rfc_mm), 2 Service Interface (z_file2rfc_ob_si and z_file2rfc_ib_ztestpi) and 1 operation mapping (z_file2rfc_om).
In the Integration Builder (ID) I've created everything required (The sender and receiver communication channels, sender and receiver agreement, receiver determination and interface mapping).
We're also using content conversion to convert the flat file to XML, this does seem to work because I see all the lines/field in the message when it gets into PI. The problem is that the RFC can only accept two fields at a time and only the first line gets updated. I see that only the first line gets sent to the RFC.
How can I make the RFC call for each and every line ?
Thanks !!

Create the RFC with table, which takes multiple lineitem as input and update the table in single call.
If you want response back then call RFC as synchrounous else in Asynchrounous mode.
By doing this in single call it will update the complete table.
Gaurav Jain
Reward Points if answer is helpful

Multiple languages in flat file

Similar Messages

Maybe you are looking for