Multiple Message 1:N Error

Hi,
I have created the interface explained in the following blog.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
It resulted in the following error
<SAP:Stack>No messages created from split mapping</SAP:Stack>
Kindly help in resolving!!!
Thanks
Karthik

Hi Karthik !
Have you created the exact same scenario? remember that IDOCs are not allowed.
What adapters are you using?
Are you sure the outbound adapter is configured properly to create the expected input message type?
Regards,
Matias.

Similar Messages

Download error under apps. After following download steps multiple times still showing error message.

Download error under apps. After following download steps multiple times still showing error message.

Hi There,
Kindly try the below mentioned links.
Creative Cloud Help | Download Error in Apps tab of Creative Cloud Desktop Application
Creative Cloud - Download error - stubborn error
Thanks,
Atul Saini

IOS 4 Error: "Unable to Move Messages" when Deleting Multiple Messages

Using an iPhone 4 and IOS 4.x (all versions to date including 4.1) if I'm in the All Inboxes view and use Edit to select multiple messages from more than one Exchange account and then delete them I get the following error:
Unable to Move Messages
The messages could not be moved to the mailbox Trash.
Deleting multiple messages from a single Exchange account is fine, but when selecting messages from more than one account the message pops up as many times as messages I'm trying to delete. I currently have three Exchange accounts on both 2003 and 2007 servers. This issue persists across multiple iPhone 4s as well as after a complete restore and manual setup of the Exchange accounts from scratch.

Not sure if this will work for the first poster, but it might for you, Busta999.
I have my email set up as an IMAP account and was getting the same "unable to move..." message for individual deletions. I suspected the problem for me had to do something with the trash bin on the phone and the trash bin on the server not communicating properly. I tried this and it worked for me, although from other posts, I see it doesn't work for everyone:
1. Go to "Settings"
2. Select "Mail, Contacts, Calendars"
3. Select the mail account in question
4. Select "Account Info"
4. Select "Advanced"
5. Select "Deleted Mailbox"
6. Under "On My Server", Click the "Trash" folder (or whatever your trash folder is called on your server). This should put a check mark beside it.

Error SocketChannel receive multiple messages at once?

Hello,
I use Java NIO, non blocking for my client-server program.
Everything works ok, until there are many clients that sending messages at the same time to the server.
The server can identify all the clients, and begin reading, but the reading of those multiple clients are always the same message.
For example, client A send "Message A", client B send "Missing Message", client C send "Another Missing Message" at the same time to the server, the server read client A send "Message A", client B send "Message A", client C send "Message A", only happen if the server trying to read all those messages at once, if the server read one by one, it's working perfectly.
What's wrong with my code?
This is on the server, reading the message:
private Selector               packetReader; // the selector to read client message
public void update(long elapsedTime) throws IOException {
if (packetReader.selectNow() > 0) {
    // message received
    Iterator packetIterator = packetReader.selectedKeys().iterator();
    while (packetIterator.hasNext()) {
      SelectionKey key = (SelectionKey) packetIterator.next();
      packetIterator.remove();
      // there is client sending message, looping until all clients message
      // fully read
      // construct packet
      TCPClient client = (TCPClient) key.attachment();
      try {
        client.read(); // IN HERE ALL THE CLIENTS READ THE SAME MESSAGES
           // if only one client send message, it's working, if there are multiple selector key, the message screwed
      } catch (IOException ex) {
//      ex.printStackTrace();
        removeClient(client); // something not right, kick this client
}On the client, I think this is the culprit :
private ByteBuffer            readBuffer; // the byte buffer
private SocketChannel client; // the client SocketChannel
protected synchronized void read() throws IOException {
readBuffer.clear();    // clear previous buffer
int bytesRead = client.read(readBuffer); // THIS ONE READ THE SAME MESSAGES, I think this is the culprit
if (bytesRead < 0) {
    throw new IOException("Reached end of stream");
} else if (bytesRead == 0) {
    return;
// write to storage (DataInputStream input field storage)
storage.write(readBuffer.array(), 0, bytesRead);
// in here the construction of the buffer to real message
}How could the next client read not from the beginning of the received message but to its actual message (client.read(readBuffer)), i'm thinking to use SocketChannel.read(ByteBuffer[] dsts, , int offset, int length) but don't know the offset, the length, and what's that for :(
Anyone networking gurus, please help...
Thank you very much.

Hello ejp, thanks for the reply.
(1) You can't assume that each read delivers an entire message.Yep I know about this, like I'm saying everything is okay when all the clients send the message not in the same time, but when the server tries to read client message at the same time, for example there are 3 clients message arrive at the same time and the server tries to read it, the server construct all the message exactly like the first message arrived.
This is the actual construction of the message, read the length of the packet first, then construct the message into DataInputStream, and read the message from it:
// packet stream reader
private DataInputStream input;
private NewPipedOutputStream storage;
private boolean     waitingForLength = true;
private int length;
protected synchronized void read() throws IOException {
readBuffer.clear(); // clear previous byte buffer
int bytesRead = client.read(readBuffer); // read how many bytes read
if (bytesRead < 0) {
    throw new IOException("Reached end of stream");
} else if (bytesRead == 0) {
    return;
// the bytes read is used to fill the byte buffer
storage.write(readBuffer.array(), 0, bytesRead);
// after read the packet
// this is the message construction
// write to byte buffer to input storage
// (this will write into DataInputStream)
storage.write(readBuffer.array(), 0, bytesRead);
// unpack the packet
while (input.available() > 0) {
    // unpack the byte length first
    if (waitingForLength) { // read the packet length first
      if (input.available() > 2) {
        length = input.readShort();
        waitingForLength = false;
      } else {
        // the length has not fully read
        break; // wait until the next read
    // construct the packet if the length already known
    } else {
      if (input.available() >= length) {
        // store the content to data
        byte[] data = new byte[length];
        input.readFully(data);
        // add to received packet
        addReceivedPacket(data);
     waitingForLength = true; // wait for another packet
      } else {
        // the content has not fully read
     break; // wait until next read
(2) You're sharing the same ByteBuffer between all your clients
so you're running some considerable risks if (1) doesn't happen.
I recommend you run a ByteBuffer per client and have a good look
at its API and the NIO examples.Yep, I already use one ByteBuffer per client, it's not shared among the clients, this is the class for each client:
private SocketChannel client; // socket channel per client
private ByteBuffer readBuffer; // byte buffer per client
private Selector packetReader; // the selector that is shared among all clients
private static final int BUFFER_SIZE = 10240; // default huge buffer size for reading
private void init() throws IOException {
storage; // the packet storage writer
input; // the actual packet input
readBuffer = ByteBuffer.allocate(BUFFER_SIZE); // the byte buffer is one per client
readBuffer.order(ByteOrder.BIG_ENDIAN);
client.configureBlocking(false);
client.socket().setTcpNoDelay(true);
// register packet reader
// one packetReader used by all clients
client.register(packetReader, SelectionKey.OP_READ, this);
}Cos the ByteBuffer is not shared, I think it's impossible that it mixed up with other clients, what I think is the SocketChannel client.read(ByteBuffer) that fill the byte buffer with the same packet?
So you're probably getting the data all mixed up - you'll probalby be seeing a new client message followed by whatever was there from the last time, or the time before.If the server not trying to read all the messages at the same time, it works fine, I think that if the client SocketChannel filled up with multiple client messages, the SocketChannel.read(...) only read the first client message.
Or am I doing something wrong, I could fasten the server read by removing the Thread.sleep(100); but I think that's not the good solution, since in NIO there should be time where the server need to read client multiple messages at once.
Any other thoughts?
Thanks again.

When i try to install i tunes i get error message 7 windows error message 126

When i try to install i tunes i get error message 7 windows error message 126

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99304)

Multiple message through FIle Adapter using XI 2.0

I have scenario to create multiple message using File adapter .My file structure will be like
EMPID     NAME     SKILLS
001     A      ABAP
001     A      XI
002     B      JAVA
Now I want to post first 2 records in one message and last record in other message.
Can we do it in XI 2.0.Any help appreciated

Hi Suraj.
Thank you very mutch for your reply.
Excuse me...my mapping is done for message type and idoc.
My problem is that when the interface start, on the sxmb_moni I see an error like this:
Creating Java mapping com.sap.xi.tf._MM_XmlOrderToIdocMapping_ --- Using MappingResolver with context URL //srvsapdev/sapmnt/CX1/SYS/global/xi/mapping/gestione_magazzini/7fa9c9e15a7811dab710f3e3ac10826e/ --- Load of com/sap/xi/tf/_MM_XmlOrderToIdocMapping_.class from //srvsapdev/sapmnt/CX1/SYS/global/xi/mapping/gestione_magazzini/7fa9c9e15a7811dab710f3e3ac10826e failed. --- Class not found: com.sap.xi.tf._MM_XmlOrderToIdocMapping_ --- java.lang.ClassNotFoundException at RUMappingJava.load(): Could not load class: com.sap.xi.tf._MM_XmlOrderToIdocMapping_ Class not found: com.sap.xi.tf._MM_XmlOrderToIdocMapping_ --- com.sap.aii.ibrun.server.map.MappingRuntimeException: at com.sap.aii.ibrun.server.map.MappingRuntimeException.code_STYLESHEET_OR_CLASS_NOT_FOUND
..where 'gestione_magazzini' is my namespace and 'MM_XmlOrderToIdocMapping' is my message mapping.
Can you help me to undestand the problem?
Thanks,
Gianluca

ESB/File Adapter - XML files containing multiple messages

Hi,
In all the examples on file adapters I read, if files contain multiple messages, it always concerns non-XML files, such as CSV files.
In our case, we have an XML file containing multiple messages, which we want to process separately (not in a batch). We selected "Files contain Multiple Messages" and set "Publish Messages in Batches of" to 1.
However, the OC4J log files show the following error:
ORABPEL-12505
Payload Record Element is not DOM source.
The Resource Adapter sent a Message to the Adapter Framework which could not be converted to a org.w3c.dom.Element.
Anyone knows whether it's possible to do this for XML files?
Regards, Ronald

Maybe I need to give a little bit more background info.
Ideally, one would only read/pick-up small XML documents in which every XML document forms a single message. In that way they can be processed individually.
However, in our case an external party supplies multiple messages in a single batch-file, which is in XML format. I want to "work" on individual messages as soon as possible and not put a huge batch file through our ESB and BPEL processes. Unfortunately we can not influence the way the XML file is supplied, since we are not the only subscriber to it.
So yes, we can use XPath to extract all individual messages from the XML batch-file and start a ESB process instance for each individual message. But that would require the creation of another ESB or BPEL process which only task is to "chop up" the batch file and start the original ESB process for each message.
I was hoping that the batch option in the File adapter could also do this for XML content and not only for e.g. CSV content. That way it will not require an additional process and manual coding.
Can anyone confirm this is not supported in ESB?
Regards,
Ronald
Message was edited by:
Ronald van Luttikhuizen

Seeburger AS2 Adapter: Receiving multiple messages

Hi guys,
I'm having some trouble using AS2 Adapter for receiving multiple messages. The problem is really similar to Peter's problem.
Seebuger AS2 adapter for XI as sender for multiple messages
I have it configured for one scenario and it's working fine. The problem is when I'm trying to receive other messages for the same Party but different services. Meaning, I've one Party(example BMW) and several services (BMW_DE, BMW_USA, etc). I'm able to receive messages from service BMW_DE but when configuring BMW_USA I'm getting HTTP 403 Forbidden.
This error may have different reasons:
a) You or your partner has entered an incorrect AS2 ID for one of the involved parties.
b) A valid sender agreement is missing.
c) There are more then one AS2 sender agreements with the same sender AND receiver party.
d) The corresponding inbound channel is set to inactive.
And the problem is that there are two sender agreements. Although the services are different, XI is not able to find the correct sender agreement to be used. After deleting the second second agreement, I'm able to send the respective message....
Can anyone give me a hint on how to solve this problem?

Hi,
this is done by different AS2 subjects. The sender agreement is selected based on this. So create separate AS2 receiver adapters for every message you need and put there different message subjects.
So if you'll have 3 AS2 receiver channels with subjects:
MessageType1_DE
MessageType1_US
the AS2 adapter will work like following:
first it tries to find an exact message subject, if it is found, message is "assigned" to this sender agreement. If no exact message matches the subject, then wildcards are used. (this mechanism is described in the Seeburger AS2 guide).
If you are getting 403 HTTP code, there may be also problem with authentication certificates.
Another problem may be, you don't have configured AS2 receiver channel for current subject.
Does this help you? Or you meant it another way?
Peter
p.s. check the answer above my post, Vardharajan's right
Edited by: Peter Jarunek on May 19, 2008 2:11 PM

NW BPM. - Split Multiple messages into 1.

Hi,
My requirement is take XML Message (Multiple Message ) into NW-BPM and split it into multiple reocrds( 1 Message each ).
further on each employee i will apply mapping logics and then again recombine it and pass it to Target Message.
Kindly Suggest.
Regards
PS.

Hi Sriram,
              I followed the above blog and successfully deployed my BPM in NWDS. I've been educated that I've create two ICOs:
First ICO->
   Sender system(SOAPUI Tool)->PI->BPM
Second ICO->
   BPM->PI->Receiver system(Local File system)
I create the Second ICO as mentioned above. Basically I used the same Sender SOAP channel in both the Inbound Processing of ICO and in the second ICO I used my local file system to send the final individual files. As per the below link(Possible cause 4:)
PI Messages are not delivered to SAP NetWeaver BPM - Technology Troubleshooting Guide - SCN Wiki
Today I re-imported my Service Interface from ESR and again created the BPM and deployed it successfully. But while testing I'm seeing the below Error from yesterday.
Note : I created wsdl file from my first ICO. I'm testing from SOPUI tool.

Service user XIISUSER locked when resending multiple messages

Hi All,
Scenario: Idoc to 2 file receiver (1 defined as a Business Service). We notice that occasionally when we send multiple idocs from R/3 or when we restart multiple messages from the same scenario, we will get a HTTP 401 error and will find our service user XIISUSER locked.
i.Has anyone come across anything like this before?
ii. In receiver determination, the "Terminate message processing with Error(Restart Possible) radio button is chosen. Out of interest, what kind of error does this give if either 1 or the receivers cannot be found during runtime?

Basically the error will be HTTP 401 Unauthorized and we will find XIISUSER locked. This usually happens when we send multiple idocs for the scenario or when we restart multiple messages that belongs to the scenario. By multiple i mean 5-10 messages and not a really big number.
Once the XIISUSER is unlocked, I can just restart the message and it will be processed successfully. What I would like to know is what is causing the XIISUSER to be locked in the first place. can this be caused by the branching of the messages?

Trace Stack Error - Multiple step operation generated errors

When importing a mapping table into Financial Data Management, I received an error code 2147217887 multiple-step operation generated errors. Check each status value. I was exporting a mapping table from our development application into our production application, so I am not sure what caused this error message. Any ideas would be greatly appreciated. Thank you.

I solved this problem.
Oracle Provider for OLE DB 9.x is supporting Unicode.
But I didn't handle Unicode (DBTYPE_WSTR).
I added Unicode handling code in my source, then there was no error.

Multiple message resend in Runtime workbench

hello experts,
Right now i m facing some problem to resend multiple messages at a time in the Runtime workbench.
If i get too many error message in Runtime workbench -> message monitoring then will anybody tell me that how i can send them at a time?
Please help me out in this case... because it is very difficult for my client to send messages one by one....
Thank you very much.
Regards,
Chaitanya.....

Hey experts,
Thanx for quick replies... but the matter is i m getting error in data... so i will not be able to get that message in error into the SXMB_MONI.
Suppose i have 2 scenarios... 1 related to invoice and 1 related to orders... now the situation is like if order will be present into my receiver system then only it will accept invoice otherwise my invoice message will go into the error... this error i will get into the RWB only.
so suppose first my invoice message come and it went into the error in RWB... and then order message went into the receiver... so now without change i can resend the message and it will give into the reciever system.....
so if i have nearly 50-60 msg in error then if i want to resend it once how i can do?
Hey i hv already tried that multiple selection option but it is allowing me to select multiple messages but it is sending only one message at a time...
So number of times i have to press resend button.... so please tell me if any other settings are required....
Thanks in advance...
Regards,
Chaitanya.............

TPM : Inbound : Maintenance of multiple messages for same partner

Hello Experts,
I am facing one strange issue.
I have this below partner maintained already for Message direction = Inbound. But when I try to add one more message ( 93A-EAN007 ) for the same Sender Partner, it gives an error as shown in the second screenshot.
But whereas when I add do similarly with Message direction = Outbound, I can add multiple messages as shown in 3rd screenshot.
Can you please help.
Second screenshot
Third screenshot
Thanks
Saurabh

Hi Saurabh ,
Directory parameters in TPM Agrements are completely Optional .
Even if you define them, they will not be used in any runtime scenario..
They will be used only in Message mapping (for fetching functional profile values),if you want to fetch some functional profile values.There is a seperate TPM function provided incase you want to call an agreement based on directory parameters.
So, whenever you enter values in TPM agreement directory parameters, then you cannot have second agreement with the same directory values. If the direcotry paramters are left blank, then they will not be considered for this uniqueness check.
On the otherside,if the agreement is based on EDI paramters (which are anyway mandatory), the agreement is used in runtime via different EDI components as well as can be used in Message mapping
(for fetching functional profile values) via predefined TPM functions.
Thanks
Appala

After renaming my MAC hard drive, Acrobat, Illustrator and Bridge fail to launch. Acrobat returns the error message "An internal error occurred". I've checked this out and it seems related to user permissions. The version is Acrobat X. My machine has mult

After renaming my MAC hard drive, Acrobat, Illustrator and Bridge fail to launch. Acrobat returns the error message "An internal error occurred". I've checked this out and it seems related to user permissions. The version is Acrobat X. My machine has multiple user accounts. Any help would be appreciated. I renamed the drive to its original name but to no effect. RR

I resolved the issue.
The problem is indeed a permissions issue with the Adobe Application Support folder.
First, in MAC OS Lion the ~/Library/ folder is hidden by default. You must unhide it in order to proceed. (if it is already visible in your ~/User/ folder, proceed to Step 4.)
Next launch the Terminal application.
At the command line, paste the following command line: chflags nohidden ~/Library/
Go to /Users/youruserid/Library/Application Support/Adobe
Get info on the ~/Adobe folder and reset your permissions to read/write and apply to all enclosed folders
Problem solved. RR

Multiple Alerts for Single error in interface is a design not issue with XI

Hi,
This is constraint of alert mechanism in XI.
You get multiple alerts for single error,the reason is that since XI will try multiple times to process a failed message so each time it fails in its tries it will send an e-mail.to stop this the "Suppress multiple alert" box is checked but what it does is that it stops all the alerts of that specific rule until the first one is confirmed.Personally i myself (and other experts too) suggest to leave the box unchecked coz its better to get tons of mails for a specific error rather than not getting any e-mail and thereby wasting time in tracking/solving the issue resulting in revenue loss to client.
As per above comments is it possible to write an ABAP code so that we can stop multiple alerts to be sending to inbox. I am sure if we can delete message from some table then we can stop sending multiple messages to alert inbox and to the subsequent mail id also. I am not sure how alert being generated. I know where they get logged in this table sxmsalertlogger. If someone know how it works in background please let me know the table names.
Regards
Ria

Hi Gaurav,
You can personalize the way in which you receive alerts.
Simply choose Personalization to make individual settings for your alert inbox. You can determine a substitute who will then receive the alerts. In addition, you can choose whether alerts are sent to you time-independently or time-dependently. The default setting is that alerts are sent time-independently to your alert inbox and via e-mail when they occur. You can additionally select the communication methods FAX and SMS for time-independent alert notification.
If you want to receive alerts only on certain days for a certain time, simply select the option for time-dependent sending of alerts and choose Create to create a new table entry. You can then choose the corresponding factory calendar, the time interval, and communication channel. Alerts that arise during this time frame will be sent in any case to your alert inbox. If you have also selected other communication channels, the alerts are additionally sent to you using these other channels.
This above text is from SAP help, do you think by changing anything in personnalisation i can stop multiple alerts. I have some issue with Personalisation link so was wondering would be worth to get tht personalisation issue resolved.
Regards
Ria

Multiple Message 1:N Error

Similar Messages

Maybe you are looking for