Multiple node mode in textarea

Does anybody know if there is a time plan for the full implementation of the "Multiple node mode" in textarea?

jsmith wrote:
Something is planned for rich text display (and perhaps also editing) in JavaFX 3.0 - whether it will fit your requirements or not I don't know.
Here are some relevant jiras (a marking of Lombard is 3.0):
http://javafx-jira.kenai.com/browse/RT-17392 "Multi-style text support (no BiDi)"
http://javafx-jira.kenai.com/browse/RT-2160 "HTML support for Text"
http://javafx-jira.kenai.com/browse/RT-17370 "RichTextArea component (reading & editing)"
The roadmap for 3.0 is here:
http://www.oracle.com/technetwork/java/javafx/overview/roadmap-1446331.html
In the meantime, there is the HtmlEditor.
http://docs.oracle.com/javafx/2/api/javafx/scene/web/HTMLEditor.html
Which can be customized to a certain extent:
https://gist.github.com/2514709
And you can embed html based editors, e.g.
https://gist.github.com/1463485
WebView also implements the contenteditable attribute:
http://stackoverflow.com/questions/10685395/webview-with-contenteditable-cannot-be-focused-programmatically
You can also make use of Swing or SWT based editors.
Or you could implement your own algorithms and controls for text layout and editing using the current JavaFX primitives.
Anyway, take your pick . . .Thanks. The answer is very helpful. I will take time to have a look at some of them in details.

Similar Messages

JTree multiple nodes selection problem !

I can not make my JTree to be in multiple node selection mode.
I have custom tree model and tree node class, the tree model class
implements javax.swing.tree.TreeModel, and the tree node is an ordinary
Java object.
In this setting, my JTree is always in single selection mode.
I have tried set the selection model after the JTree has initialized, and
it didn't work.
What I missed in TreeModel implementation ? Or should my tree node class
also implements javax.swing.tree.TreeNode ?
Don't tell me just call
xxtree.getSelectionModel().setSelectionMode(javax.swing.tree.TreeSelectionModel.DISCONTIGUOUS_TREE_SELECTION);
It didn't work.

Just in case anyone wants to know, I did find the magic number of files, and what the problem is. I talked with tech suppot at Adobe, and they know the problem exists, but won't fix it. I did put in a request in the "Request a Feature" form. Read on:
The magic number is 40 Canon 1Ds Mark III Raw files, and clicking on three or more keywords. The key to not having the numbers of keywords counted incorrectly in the filter pane is to click on the keywords as fast as you can before it starts to write to the metadata. If you click on each keyword one at a time, and wait about a second or more between selecting the keywords, then the counts in the filter panel for the number of keywords is not correct in relation to the number of files that you have chosen to apply keywords to. The cure for this is to click as many keywords as possible as fast as you can before the software starts incorporating the keywords into the metadata.
I would suggest to Adobe, that a nice feature would be that one could click on as many keywords as one would want, to as many files one would want, and then have a button or icon that would enable one to then apply all the keywords at once, instead of applying them as you click them as it is now. I also would love it if Adobe fixed it now instead of waiting to fix it in the version of CS5. Someone on Adobe's support line told me that Adobe would rather wait to put this into the CS5 version than fix it now. I don't think that is right, but heck, I am only one guy who depends on this software to provide images keyworded to my clients in a timely manner. I would never run my business like this Adobe. If there is a problem, and there is, please fix it now, or give me some of my money back since your product has a design flaw that is having a negative impact in my ability to to my job and run my business.
Thanks!
Daniel Root
Portland, OR

How to get the data from multiple nodes to one table

Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
Indra

HI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM.

BW 3.5 works with multiple nodes for authorizations

Hi,
Does BW 3.5 allow to do authorizations on mutiple nodes? It seems that from the How to wotk with hierarchy authorizations paper, the variable can only allow filtering 1 node. for 2.0B. We have requirements to allow viweing multiple nodes in a hierarchy.
Thanks
Will

Hi Will,
creat a hierarchy-node variable fill by authorizations in the frontend. The type has to be multiple entries (not single value). In RSSM at the hierarchy authorization creation you have to use the F4 for selecting nodes. The F4 allows to drag more nodes into the right frame.
Cheers
Peter

How would I delete multiple nodes at a time in OSB

I want to delete multiple nodes in OSB at a time. I have a request and that needs to get rid of the Nodes instead of using multiple delete actions I want to achieve in one shot. Any suggestions

Hi,
You should be able to delete all nodes selected by an XPath expression... Have a look at this...
http://docs.oracle.com/cd/E28280_01/dev.1111/e15866/ui_ref.htm#i1290003
Cheers,
Vlad

BizTalk Mapper - Looping multiple nodes to map to a single node in a single row (flat file)

Hi everybody,
I'm still new in developing BizTalk app and require some help in this one problem. Appreciate your time and input to help me on this.
Basically I have an XML document as input and a flat file as output. Example for input is as per below. The "Contact" node's maxOccurs here is set to unbounded and could be multiple. (phone, fax, website, telex ...)
<root>
<CustomerName>Company A</CustomerName>
<Contact>
<Type>Phone</Type>
<Locator>03566789</Locator>
<Type>Phone</Type>
<Locator>03566790</Locator>
<Type>Fax</Type>
<Locator>03566795</Locator>
<Type>Telex</Type>
<Locator>03566798</Locator>
<Type>Website</Type>
<Locator>www.companyA.com</Locator>
</Contact>
</root>
The expected output in XML would look like below. The final outcome would be a csv file. Strictly Phone 1, phone 2, fax and telex, the rest would be ignored.
<root>
<CustomerName>Company A</CustomerName>
<Phone1>03566789</Phone1>
<Phone2>03566790</Phone2>
<Fax>03566795</Fax>
<Telex>03566798</Telex>
</root>
Example of expected output result (csv file): CompanyName;Phone1;Phone2;Fax;Telex;
In our case here: Company A;03566789;03566790;03566795;03566798;
Another example could be: Company B;036778911;;036778912;; if only 1 phone number and 1 fax number provided.
I've used Table Looping and Table Extractor and nearly got the desired result except that it is represented in multiple rows instead of one: Example:
Company A;03566789;;;
Company A;;03566790;;;
Company A;;;03566795;;
Company A;;;;03566798;
Any idea how to do the mapping? I'm kind of stuck here and it sounds like an easy problem but i could not find any example to the solution that I need here. Table looping and table extractor is ok to map from single node flat file to multiple nodes but not
the reverse like in this example.
rgds,
sportivo

Hi,
Please refer to below links where similar issue has been answered.
http://social.msdn.microsoft.com/Forums/en-US/biztalkgeneral/thread/ecdff241-6795-4a95-bad7-48fca4410dfb
http://www.epinaki.com/2011/05/other-options-to-using-biztalk-table-looping-functoid-par-i/
I hope this helps you.
Thanks With Regards,
Shailesh Kawade
MCTS BizTalk Server
Please Mark This As Answer If This Helps You.
http://shaileshbiztalk.blogspot.com/

How to create multiple nodes for a feature in PE03

Hi Specialists,
I have a requirement for australia where we need to maintain multiple nodes in a feature ( Tcode : PE03).
Action Type      Action Reason
L6                      00
                          01
L7                      06
                          08
L2                      01
Issue is : 1) How can we maintian the above values in a feature tree.
                2) The SAP standard structure is using PME14 but PME14 does not contain the 2 above mentioned
                     fields i.e.( Action Type & Action Reason). Istead it is contained in structure PME04 .
                    SO how can we modify the SAP standard structure.
                3) The above strucure PME14 is being read in an SAP standard report RPCPSPQ0 :
                     i.e Payment Summary Report tcode: PC00_M13_PSGEN . If we want to accomodate the new requirement for        australia does that mean we need to modify SAP standard report / or is there a user exit/BADI available to avoid making changes to SAP standard report.
Please suggest.

Can you please supply the name of the Feature you are trying to use? it will help to understand the full picture.

Remote Access VPN Support in Multiple Context Mode (9.1(2))?

Hi Guys,
I am currently running two Cisco ASA5520 (ASA Version: 9.1(2)) firewalls in Active/Standby failover and was contemplating the option of migrating my remote access VPN to these firewalls. However seeing that the new IOS now support mixed multiple context mode and dynamic routing. Is it safe to ask whether or not Remote Access VPN is now support in this IOS upgrade?
Multiple Context Mode New Features:
Site-to-Site VPN in multiple context mode | Site-to-site VPN tunnels are now supported in multiple context mode.
New resource type for site-to-site VPN tunnels | New resource types, vpn other and vpn burst other, were created to set the maximum number of site-to-site VPN tunnels in each context.
Dynamic routing in Security Contexts | EIGRP and OSPFv2 dynamic routing protocols are now supported in multiple context mode. OSPFv3, RIP, and multicast routing are not supported.
New resource type for routing table entries | A new resource class, routes, was created to set the maximum number of routing table entries in each context. We modified the following commands: limit-resource, show resource types, show resource usage, show resource allocation. We modified the following screen: Configuration > Context Management > Resource Class > Add Resource Class.
Mixed firewall mode support in multiple context mode | You can set the firewall mode independently for each security context in multiple context mode, so some can run in transparent mode while others run in routed mode. We modified the following command: firewall transparent. You cannot set the firewall mode in ASDM; you must use the command-line interface. Also available in Version 8.5(1).
Regards,
Leon

Hey Leon,
According to the ASA 9.1 Configuration Guide, Remote Access VPN is not yet supported with version 9.1(2). Only Site-to-Site VPN support in multiple context was introduced with release ASA 9.0(x). This was mentioned in the 9.0(x) release notes.
Regards,
Dennis

AirTunes (Multiple Speaker Mode)

AirTunes (Multiple Speaker Mode) does not show up.
AE firmware has been updated to 6.3
using Itunes 7.02
Mac osx 10.4.8
I just updated everything to what you see above, I have gone into system preferences, my firewall is off, and udp traffic blocking is unchecked.
I cannot see Multiple speaker mode, but it does list my computer and an external set of speakers, which I can connect to individually but cannot connect to both at the same time.
Any help would be appreciated.
mini mac Mac OS X (10.4.8) Itunes 7.02, firmware update 6.3 for AE

While running iTunes, the small button in the bottom right corner where you choose your output. Click on this and there is an option to connect to multiple speakers. I just updated all the same things as yourselves yestarday and that is how i found it to work.
Pinkster

BizTalk mapping multiple nodes

Hello All,
Below is an example of a schema I have to work upon. There will be multiple nodes of Diviions under the root node and there will be similar number of divisions node under the mappings node. now each divisions node (under root node) will have multiple record
nodes which will each have an industry_type node. So, what I want to do is match both industry_type nodes (each under root and mappings node) and if the value is same I want to map the industry_type_value to the destination schema. So there can be n number
of industry_type nodes and I want to have equal number in the destination schema. When I am using a looping functoid along with value mapping I am getting the non matchin industry_type nodes too in the destination schema.
Please help me with the same.

Hey Ashwin,
I am unable to add the xml so am pasting the files:
Input:
<ns0:Root xmlns:ns0="http://Pricing.MTB.Schema.Schema1">
<Divisions>
    <Record>
      <Identifier>node1</Identifier>
      <Industry_Type>ABC</Industry_Type>
    </Record>
    <Record>
      <Identifier>node2</Identifier>
      <Industry_Type>DEF</Industry_Type>
    </Record>
    <Record>
      <Identifier>node3</Identifier>
      <Industry_Type>GHI</Industry_Type>
    </Record>
</Divisions>
<Mappings>
    <Record>
      <Industry_type>ABC</Industry_type>
      <Industry_Type_value>ABC0</Industry_Type_value>
    </Record>
    <Record>
      <Industry_type>DEF</Industry_type>
      <Industry_Type_value>DEF0</Industry_Type_value>
    </Record>
    <Record>
      <Industry_type>GHI</Industry_type>
      <Industry_Type_value>GHI0</Industry_Type_value>
    </Record>
</Mappings>
</ns0:Root>
Output:
<ns0:Root xmlns:ns0="http://Pricing.MTB.Schema.Schema2">
<Divisions>
    <Record>
      <Identifier>node1</Identifier>
      <Industry_Type>ABC0</Industry_Type>
    </Record>
    <Record>
      <Identifier>node2</Identifier>
      <Industry_Type>DEF0</Industry_Type>
    </Record>
    <Record>
      <Identifier>node3</Identifier>
      <Industry_Type>GHI0</Industry_Type>
    </Record>
</Divisions>
</ns0:Root>

Having multiple Node manger process in a single host machine.

I am using weblogic server(portal)10.2.
I am running the Node Manager to start the admin server.I have installed Java based Node manager in the host machine .Created a unix id ND1 and started the Node Manager utiliy with this id.
I keep on creating domain for my new applicaitons and add this ND1 in each new domain group,so that ND1 will access the new domain's admin folder.
Now when I add this ND1 in more than 16 domain groups,I got trouble in accessing the domain folder.In unix OS there is group membership limitation where a unix id cannot be in more than 16 groups.
Anyone came acroos this issue?
Possible options.
1) Can we have multiple node manager ids(ND1,ND2,ND3..etc) for a single Node manager utility in single host?
2) While starting the server,will node manager look only the nm_password.properties file in domain folder?

You can boot multiple Node Managers if you change the NodeManager home. To do that, create a directory for each NodeManager and copy the startNodeManager script to it. Then edit the NODEMGR_HOME, LISTEN_ADDRESS, and LISTEN_PORT

Explain about transparent mode, single mode, multiple context mode

You can explain about the differents of transparent mode, single mode, multiple context mode in ASA 5500? Thank you very much.

Great question. Hope the below helps:
Transparent Mode: In this mode, the ASA will filter traffic without requiring L3 on the ASA. This means that in your config you will not put IPs on the interfaces to be used for traffic filtering. Thus, filtering is transparent to the traffic as the traffic isn't directly routed to the firewall. Think of it like you have a server plugged into a switch. In transparent mode, you place the ASA between the server and the switch and no configuration change is required to the server. In routed mode, you place the ASA in the same physical location between the server and switch, but have to change the server to use the ASA as a default gateway.
Single Mode: Default mode of an ASA. The ASA acts as a single firewall and all interfaces are provisioned to be managed through a single firewall configuration.
Multiple Context Mode: The ASA is split into multiple virtual configurations. With the ASA now virtualized, you provision the physical interfaces on the ASA to the virtual firewall configured. Each context has it's own configuration seperate from the rest of the firewall. Multi-context is meant for enterprises to invest in a single piece of hardware and scale it for use as multiple security devices.
Hope this helps. Let me know if you have anymore questions!
-Mike
http://cs-mars.blogspot.com

Select the multiple nodes in a tree

Hi Experts,
We need to select the multiple nodes in a tree.Whatever we are selecting,that has to be added in the table as a tree structure itself.
For ex:
A
|--A1
|--B1
If We select the A then A,A1 and B1 has to be added in a table.Please help me out for this.
Regards
Nutan
Edited by: Armin Reichert on Jan 29, 2008 2:33 PM

Hi,
You have to create a recursive node and use the tree by nesting UI component
Following tutorial will be of use
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/webdynpro/wd%20java/wdjava%20tutorials%20and%20articles%20archive/constructing%20a%20recursive%20and%20loadable%20web%20dynpro%20tree.pdf
Recursive Node
http://help.sap.com/saphelp_nw70/helpdata/en/5d/97384162316532e10000000a1550b0/frameset.htm
TreeByNesting
http://help.sap.com/saphelp_nw70/helpdata/en/92/12a74046033913e10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#31 [original link is broken]
Regards
Ayyapparaj

Drag and drop of multiple nodes between 2 trees

Hi,
I am trying to implement a drag and drop of multiple nodes between two different trees. A simple drag drop written on the lines of the demo code RSDEMO_DRAG_DROP_TREE_MULTI works perfectly fine. But my requirement is, when a child (leaf) node is dragged, if its parent is not present in the target tree, that too has to be dragged and dropped from left to right. When I try to manually add nodes to the target tree, it dumps because the node key table and drag drop object have fewer nodes than what I am trying to add. So it always dumps in the drag_drop_complete method.
I have also tried putting this code in the PBO of my screen, calling a subroutine to refresh my tree with all nodes required. But I realise that the PBO does not get called after a drag drop. Is there a way to achieve this? Any help would be greatly appreciated. Thank you.
Regards,
Nithya

There's a Multi-Select TreeView sample on the WindowsClient.com, you can download it. Then you can drag multi nodes as follows:
Code Snippet
private void Form2_Load(object sender, EventArgs e)
            this.listBox1.AllowDrop = true;
            this.listBox1.DragOver += new DragEventHandler(listBox1_DragOver);
            this.listBox1.DragDrop += new DragEventHandler(listBox1_DragDrop);
            this.multiSelectTreeView1.ItemDrag += new
                 ItemDragEventHandler(multiSelectTreeView1_ItemDrag);
        void multiSelectTreeView1_ItemDrag(object sender, ItemDragEventArgs e)
            this.multiSelectTreeView1.DoDragDrop(this.multiSelectTreeView1.SelectedNodes,
                 DragDropEffects.Move);
        void listBox1_DragDrop(object sender, DragEventArgs e)
            ArrayList selectNodes = e.Data.GetData(
                e.Data.GetFormats()[0]) as ArrayList;
            foreach (TreeNode node in selectNodes)
                this.listBox1.Items.Add(node.Text);
        void listBox1_DragOver(object sender, DragEventArgs e)
             e.Effect = DragDropEffects.Move;

Random Selection Failure - to-spec at line is evaluated to multiple nodes

Hi,
Has anybody come across a situation were an assign activity fails with an
"Exception is thrown because the to-spec at line 113 is evaluated to multiple nodes"
The problem is that an element in a variable appears more than once although it is restricted to maxOccurs="1".
e.g
<variable>
<outputVariable>
<part name="payload" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Output xmlns="http://xmlns.oracle.com/MyApp/MySchema">
<result/>
<result/>
</Output>
</part>
</outputVariable>
</variable>
The result element has a maxOccurs="1" in the xsd and the operation in the assign activity is a copy not an append!
The problem is not consistent and happens randomly with the same set of data.

Hi I understand the workaround here (adding [1] to the to-spec expression) - but what about the extra empty nodes, when we move to the next step in our process will those empty nodes still exist - since our XSD sets that node to maxOcurrs="1" this would cause issues down stream if these empty nodes are carried forward - we are thinking of putting in a XSLT to remove them, but wanted to see if anyone has input on if they will be carried forward - since this is a random issue ware not able to reproduce it in our dev/test environment, it seems to only happen in our Production environment.

Multiple node mode in textarea

Similar Messages

Maybe you are looking for