Multiple Passed Authentication and Failed Attempts for the users

Hi,
I encountered the following error logs in the ACS CSAuth folder. I did logging to full to find out more about the process involved in the PEAP Authentications.
=========================================
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: Service-Type=2
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: Framed-MTU=1300
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: NAS-Port-Type=19
AUTH 09/13/2007 09:41:33 E 0143 8672 [PDE]: PdeAttributeSet::addAttribute: invalid attr type=200
AUTH 09/13/2007 09:41:33 E 0143 8672 [PDE]: PdeAttributeSet::addAttribute: invalid attr type=200
AUTH 09/13/2007 09:41:33 E 0143 8672 [PDE]: PdeAttributeSet::addAttribute: invalid attr type=201
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: EAP-Message=(binary value)
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: Message-Authenticator=(binary value)
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: PDE-NAS-Vendor-14=13
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: PDE-Service-ID-0=0
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PolicyMgr::SelectService: context id=14824; no profile was matched - using
default (0)
AUTH 09/13/2007 09:41:33 I 5081 8672 Done RQ1152, client 2, status 0
AUTH 09/13/2007 09:41:33 I 5094 9668 Worker 5 processing message 1077.
AUTH 09/13/2007 09:41:33 I 5081 9668 Start RQ1026, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:33 I 1554 9668 pvAuthenticateUser: authenticate 'STAFPSAS\shimah' against Windows Database
AUTH 09/13/2007 09:41:33 I 5081 9668 Done RQ1026, client 50, status -2046
AUTH 09/13/2007 09:41:33 I 5094 9668 Worker 5 processing message 1078.
AUTH 09/13/2007 09:41:33 I 5081 9668 Start RQ1027, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:33 I 0897 9668 AuthenProcessResponse: process response for 'STAFPSAS\shimah'
AUTH 09/13/2007 09:41:33 I 5081 9668 Done RQ1027, client 50, status -2046
AUTH 09/13/2007 09:41:33 I 5094 9668 Worker 5 processing message 1079.
AUTH 09/13/2007 09:41:33 I 5081 9668 Start RQ1027, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:33 I 0897 9668 AuthenProcessResponse: process response for 'STAFPSAS\shimah'
AUTH 09/13/2007 09:41:33 I 5081 9668 Done RQ1027, client 50, status -2046
AUTH 09/13/2007 09:41:33 I 5094 9668 Worker 5 processing message 1080.
AUTH 09/13/2007 09:41:33 I 5081 9668 Start RQ1027, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:33 I 0897 9668 AuthenProcessResponse: process response for 'STAFPSAS\shimah'
AUTH 09/13/2007 09:41:33 I 5081 9668 Done RQ1027, client 50, status -2121
AUTH 09/13/2007 09:41:34 I 5094 9668 Worker 5 processing message 1081.
AUTH 09/13/2007 09:41:34 I 5081 9668 Start RQ1027, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:34 I 0897 9668 AuthenProcessResponse: process response for 'STAFPSAS\salasiah'
AUTH 09/13/2007 09:41:34 E 0361 9668 EAP: PEAP: getEapMsgFromPeapTunnelFrag: error decrypting non fragmented data.
AUTH 09/13/2007 09:41:34 E 0361 9668 EAP: PEAP: getEapMsgFromPeapTunnelFrag: SSL send alert fatal:unexpected_message
AUTH 09/13/2007 09:41:34 I 5081 9668 Done RQ1027, client 50, status -2120
AUTH 09/13/2007 09:41:34 I 5094 8672 Worker 1 processing message 842.
AUTH 09/13/2007 09:41:34 I 5081 8672 Start RQ1040, client 2 (127.0.0.1)
AUTH 09/13/2007 09:41:34 I 5081 8672 Done RQ1040, client 2, status 0
AUTH 09/13/2007 09:41:34 I 5094 8672 Worker 1 processing message 843.
AUTH 09/13/2007 09:41:34 I 5081 8672 Start RQ1152, client 2 (127.0.0.1)
=========================================
Can anyone suggest what could be the cause of the error?
I suspected something to do with the certificate. Please advise.
Thanks.
Delon
Thanks.

If ACS and Supplicant or only ACS is enabled Fast Reconnect option, authentication will fail.If you are using XP SP2, it'll be fixed with applying KB885453 patch or simply just disable FAST Reconnect option at ACS. Also make sure user account trying to authenticate has a valid entry in active directory.

Similar Messages

HT201401 I changed my pass code and couldn't remember the new pass code. After several failed attempts, my iPhone has been disabled. What do I do?

I changed my pass code and couldn't remember the new pass code. After several failed attempts, my iPhone has been disabled. What do I do?

If you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.

After a quiz can you show the questions and answers for the user to review from passing the quiz

After taking a quiz, is there a way to show the questions and answers for the user to review from passing the quiz.
And the ones who has failed the quiz would be directed to the first slide again to take the quiz over.
Thanks

Rod
I see that information about adding the review quiz button but on that last slide where it shows results, I want it jump back to slide 1 but it jumps to the first question of the slide. Is there a way around that?

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) The user name or password is incorrect

I am able to run the report fine in BIDS in the preview window, and it deployes fine. When it goes to view the report in the browser, I get the following error. There is no domain, I am using a standalone computer with SQL Server and SSRS on
this one machine.
Can anyone point to where I might configure the permission it is looking for? thanks! Steven
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect
Steven DeSalvo

Hi StevenDE2012,
Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
Configuration is not correct.
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
to other computers. To configure the account, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
In addition, please verify you have access to the Report Server database by following steps:
Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
Go to Database, Verify that you can connect to the database.
Make sure you are granted public and RSExecRole roles.
Reference:
Configure the Unattended Execution Account
Configure a Report Server Database Connection
If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu

What is the best antivirus software for a Macbook Pro...I recently received a message from Google that someone made an attempt to hack into my mail account so I needed to change my PW and verify myself as the user. The message suggested that I run a scan

What is the best antivirus software for a Macbook Pro...I recently received a message from Google that someone made an attempt to hack into my mail account and I needed to change my PW and verify myself as the user. The message suggested that I run a virus scan to check for sny malware or other types of viruses. I do not have any software for this and up until now have not had a problem....any help is appreciated. I would like a simple but effective solution!

It's worth noting that if your Gmail has been hacked, it would likely have nothing to do with your MacBook. Hacking web based email is fairly common and it doesn't require any access to your machine whatsoever. In the same way that you can simply go to the Gmail webpage through any browser, any hacker can use the same method. It doesn't mean your machine has been compromised in any way (and it has likely not been). I have never received an email from Google of this nature. I have received notifications when someone has attempted to create an account with my name in which they basically say that there is no action required if you're the rightful owner.

Unable to Export iMovie project in everyway I have attempted for the past 2 weeks. Please Help! Due date coming up!

I've unable to Export iMovie project in everyway I have attempted for the past 2 weeks.I have a late 2012 iMac with 8gb of RAM and 700 gb of free space on the hard drive. The video I am trying to export is 48 mins long with most of the source footage from a NIkon D3100 and several other cammcorders. I've been exporting with Apple Intermediate codec because that was the only one that has work so far but it only worked once and since then I have had to make changes to the project and now I'm unable to get it to work. For all Quicktime exports in H.264 or AIC (my prefered format for this export since I figured it'd offer the highest quality when I import it into Encore for making a dvd out of it) Which just stops exporting in the last few minutes without explination as to why or it crashes and quits. It either leaves a partial file or nothing at all. When I do "export movie" I get a "not enough memory Heap zone error"
I don't know what to do any help would be greatly appreciated!
By the way I happen to have Adobe CS6 Production Premium but didn't know how to use it as well when starting the project and now really regret not using it because it appears to be 10x more stable and capable of handling all the tasks I want it to do.

Hi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
Free Space on Start-Up hard disk. How much ? (other disks do not count)
AppleMan1958
Are your event clips in h.264? If so, you can solve this by Right clicking on your Event Name and choose "Optimize Media". You can choose Full for 1080P or Large for 960P according to your preference.
After you have optimized your Event, you should be able to Share with no problem.
Lennart Thelander
-108 mean you are running out of (free) RAM.
Try restarting the computer just prior to sharing. That frees up RAM.
from mynameisearl
Final Entry
Ok - after much cutting, trial and error and days of work I have never really established a root cause for the -108 error. Nothing I did resolved the issue to the orginal project.
The only work around I have found is to split the Original Project into two.
What I found was that anything around the 60 mins mark and above just failed to render in HD and showed the -108 error.
What worked for me was creating two project files - one around 57mins long - the other a part 2 - around 17 mins long. All using exactly the same source clips, photo's, music and transitions as the orginal.
This now works. I guess having it split in two makes it a little easier to work with as I wont have to keep rendering the first part which does not change but really wish Apple would throw some light on this.
Anyway - I hope all of the above at least proves useful for others.
Good Luck

Vista & Outlook 2007: Sync with second XP & Outlook 2003 - The passed buffer is too small for the reply data

Dear Community,
I'm synchronising my T3 with two PCs. One with Vista & Outlook 2007 and the other with XP & Outlook 2003. Both with the latest conduit & Hotsync Manager versions installed for each OS based on the availability on the Palm Website.
My problem is that when I synchronise the T3 with either PC and then try to sync it with the other I'm receiving the following error message for the Calendar:
Outlook Calendar
The passed buffer is too small for the reply data.
OLERR:0D-0008
OLERR:0D-0004
OLERR:0D-0001
- Slow Sync
Outlook Calendar synchronization failed
The second time the sync is successful but takes a long time and the actual problem is that it creates duplicates for records previously changed on either PC - but with a sync in between those changes, i.e. no conflict in the sense that the same record was changed in both environments since the last sync. I have configured the conflict handling to establish a hierarchy PC1-T3-PC2 but try to avoid them by synchronising as often as possible.
Has anyone come across that problem or any ideas? Can you somehow adjust the buffer size for the sync? I have been using Lotus Organiser & then the various Outlook versions for a number of years.
Thank you
Rainer
Post relates to: Tungsten T3
Post relates to: Tungsten T3

As they say on TV, "Doh"!!!
I figured out the problem. I started the Sync tool, selected "Settings", then "Mcrosoft Outlook" tab and then "Select Folders" button. I browsed to the proper folders in Outlook (Calendar, Tasks, etc). Select OK enough times and retried the sync.
It worked.

PKI view , AIA and CDP locatiion for the RootCA has red crossover " unable to download"

I am trying to create a PKI infrastructure on winserver2008R2 enterprise as follows
offline ROOT CA---Standalone
Online Intermediate CA -- enterprise
PROBLEM:
on the intermediate CA: using enterprise PKI view , AIA and CDP locatiion for the RootCA has red crossover " unable to download"but enterprise pki view "manage AD container" indicated the AIA and CDP container
had OK for the root CA CDP and AIA.
Any help will be appreciated
INSTALLATION STEPS :
i performed the ffg on offline RootCA
create the CA policy policy file and store in windows folder
install ADCS
run post installation script
The Certificate Service was successful and saw a green icon in the console
I performed the ffg on online enterprise CA
create the CA policy policy file and store in windows folder
install ADCS
i successfully published the root CA cert and CRL in the local store and AD. i saw the ffg message upon completion
CertUtil: -addstore command completed successfully.
CertUtil: -dsPublish command completed successfully.
install ADCS
below is the output for getreg ( CRL and AIA)
C:\Users\Administrator.GORYEAL>certutil -getreg CA\CRLPublicationURLs
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CertSvc\Configuration\GINTC
A\CRLPublicationURLs:
CRLPublicationURLs REG_MULTI_SZ =
    0: 65:C:\Windows\system32\CertSrv\CertEnroll\%3%8%9.crl
    CSURL_SERVERPUBLISH -- 1
    CSURL_SERVERPUBLISHDELTA -- 40 (64)
    1: 79:ldap:///CN=%7%8,CN=%2,CN=CDP,CN=Public Key Services,CN=Services,%6%10
    CSURL_SERVERPUBLISH -- 1
    CSURL_ADDTOCERTCDP -- 2
    CSURL_ADDTOFRESHESTCRL -- 4
    CSURL_ADDTOCRLCDP -- 8
    CSURL_SERVERPUBLISHDELTA -- 40 (64)
    2: 0:http://%1/CertEnroll/%3%8%9.crl
    3: 0:file://%1/CertEnroll/%3%8%9.crl
    4: 65:file://\\www\Certdata\%3%8%9.crl
    CSURL_SERVERPUBLISH -- 1
    CSURL_SERVERPUBLISHDELTA -- 40 (64)
CertUtil: -getreg command completed successfully.
C:\Users\Administrator.GORYEAL>certutil -getreg CA\CACertPublicationURLs
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CertSvc\Configuration\GINTC
A\CACertPublicationURLs:
CACertPublicationURLs REG_MULTI_SZ =
    0: 1:C:\Windows\system32\CertSrv\CertEnroll\%1_%3%4.crt
    CSURL_SERVERPUBLISH -- 1
    1: 3:ldap:///CN=%7,CN=AIA,CN=Public Key Services,CN=Services,%6%11
    CSURL_SERVERPUBLISH -- 1
    CSURL_ADDTOCERTCDP -- 2
    2: 0:http://%1/CertEnroll/%1_%3%4.crt
    3: 0:file://%1/CertEnroll/%1_%3%4.crt
CertUtil: -getreg command completed successfully.

when i ran certutil -URL http://www.goryeal.com/CERTDATA/GROOTCA.crl
i saw a status message of OK
when i paste the url(http://www.goryeal.com/CERTDATA/GROOTCA.crl) from pki view in the browser i got the message:
404 - File or directory not found
But when i copy the url(http://www.goryeal.com/CERTDATA/) in the browser , i was able to see the root ca CRL :
I revoked CA exchange cert and issue a new one but still no luck. Below is the verification for the ca exchange cert:
certutil.exe -verify -urlfetch
c:\ca.cer
Issuer:
    CN=GINTCA
    DC=goryeal
    DC=com
Subject:
    CN=GINTCA-Xchg
    DC=goryeal
    DC=com
Cert Serial Number: 61db778400000000000b
dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN_EXCLUDE_ROOT (0x40000000)
HCCE_LOCAL_MACHINE
CERT_CHAIN_POLICY_BASE
-------- CERT_CHAIN_CONTEXT --------
ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
ChainContext.dwRevocationFreshnessTime: 6 Days, 21 Hours, 50 Minutes, 11 Seconds
SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
SimpleChain.dwRevocationFreshnessTime: 6 Days, 21 Hours, 50 Minutes, 11 Seconds
CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=GINTCA, DC=goryeal, DC=com
NotBefore: 4/2/2014 5:00 PM
NotAfter: 4/9/2014 5:10 PM
Subject: CN=GINTCA-Xchg, DC=goryeal, DC=com
Serial: 61db778400000000000b
Template: CAExchange
Template: CA Exchange
5f c7 75 f7 e9 da 4b 96 ea 05 48 f2 2f 49 0d 96 b8 d0 f7 16
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA
Verified "Certificate (0)" Time: 0
    [0.0] ldap:///CN=GINTCA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?cACertificate?base?objectClass=certificationAuthority
---------------- Certificate CDP
Verified "Base CRL (06)" Time: 0
    [0.0] ldap:///CN=GINTCA,CN=INTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?certificateRevocationList?base?objectClass=cRLDistributionPoint
Verified "Delta CRL (06)" Time: 0
    [0.0.0] ldap:///CN=GINTCA,CN=INTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?deltaRevocationList?base?objectClass=cRLDistributionPoint
---------------- Base CRL CDP
OK "Delta CRL (06)" Time: 0
    [0.0] ldap:///CN=GINTCA,CN=INTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?deltaRevocationList?base?objectClass=cRLDistributionPoint
---------------- Certificate OCSP
No URLs "None" Time: 0
    CRL 06:
    Issuer: CN=GINTCA, DC=goryeal, DC=com
    bc c0 e1 8c e1 4c 18 34 5f 06 ca c1 f2 a0 3b 4d 58 9f 27 70
    Delta CRL 06:
    Issuer: CN=GINTCA, DC=goryeal, DC=com
    69 cf 42 09 59 48 3f 07 bf b7 8a 4c 01 a6 45 5f 13 87 da 1b
Issuance[0] = 1.2.3.4.1455.67.89.5
Application[0] = 1.3.6.1.4.1.311.21.5 Private Key Archival
CertContext[0][1]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=GROOTCA
NotBefore: 3/26/2014 8:01 PM
NotAfter: 3/20/2019 8:38 PM
Subject: CN=GINTCA, DC=goryeal, DC=com
Serial: 1297cd88000000000004
Template: SubCA
a4 96 15 fd 62 c1 1c 86 db 21 15 a7 d4 b4 0e 16 8f 03 2c de
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA
Verified "Certificate (0)" Time: 0
    [0.0] ldap:///CN=GROOTCA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?cACertificate?base?objectClass=certificationAuthority
Verified "Certificate (0)" Time: 0
    [1.0] http://www.goryeal.com/Certdata/ROOTCA_GROOTCA.crt
---------------- Certificate CDP
Verified "Base CRL (06)" Time: 0
    [0.0] ldap:///CN=GROOTCA,CN=ROOTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?certificateRevocationList?base?objectClass=cRLDistributionPoint
Failed "CDP" Time: 0
    Error retrieving URL: Error 0x80190194 (-2145844844)
    http://www.goryeal.com/Cerdata/GROOTCA.crl
---------------- Base CRL CDP
No URLs "None" Time: 0
---------------- Certificate OCSP
No URLs "None" Time: 0
    CRL 06:
    Issuer: CN=GROOTCA
    f7 3d fb a7 12 bf f1 b5 e9 35 b7 a1 2b 17 2a 28 29 36 c6 8a
Issuance[0] = 1.2.3.4.1455.67.89.5
CertContext[0][2]: dwInfoStatus=10c dwErrorStatus=0
Issuer: CN=GROOTCA
NotBefore: 3/20/2014 8:28 PM
NotAfter: 3/20/2019 8:38 PM
Subject: CN=GROOTCA
Serial: 2157e0150f7e149e49295666612464ef
b5 a8 4c e1 64 9d b0 aa c5 e4 b7 b0 4f 5e fe e3 99 aa 61 de
Element.dwInfoStatus = CERT_TRUST_HAS_NAME_MATCH_ISSUER (0x4)
Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA
No URLs "None" Time: 0
---------------- Certificate CDP
No URLs "None" Time: 0
---------------- Certificate OCSP
No URLs "None" Time: 0
Issuance[0] = 1.2.3.4.1455.67.89.5
Exclude leaf cert:
e8 5b f7 0b 59 b4 84 97 87 96 1b f1 39 9b 15 14 24 84 d0 77
Full chain:
ca 29 87 01 d8 6f e6 28 d7 16 a9 5c 81 74 d3 b8 1e c9 44 53
Verified Issuance Policies:
    1.2.3.4.1455.67.89.5
Verified Application Policies:
    1.3.6.1.4.1.311.21.5 Private Key Archival
Leaf certificate revocation check passed
CertUtil: -verify command completed successfully.

On iOS 8 and "old" device for the operating system. О iOS 8 и "Старых" устройствах на этой операционной системе

USA.
Good day! I like you a fan of the forum users of APPLE. I live in the Russian Federation. Began his acquaintance with this company back in 2010 with the Ipad 2 device was still on ios 5. In January 2014 I made a gift and bought the iPhone 5s on OC IOS 7. I bought it at the official Russian official price that more accurately put Apple in 1100 $. In our country, it is a lot of money. With the money I could live for 3 months. In fact, I became the owner of a top (at the time) from a favorite device of Apple. My iPhone 5s worked perfectly on ios 7. sometimes met friezes light animation, and non-critical bugs, but who is without sin? Favorite company I was willing to forgive it because I see that she is trying to be better and not standing still. Looking WWDC presentation which provided us with iOS 8 you assured me that everything was better, faster, more functional. I was determined that update my iPhone 5s to iOS 8.0 ... APPLE releases new OC iOS 8 ... And I live! Behind the beautiful words that we said at the presentation of the great features of the new iOS hiding "something." And that "something" turned my phone in ... "pumpkin"! Yes! In that same stupid pumpkin! And now I will explain why I think it's pumpkin, not rose.
Sea bugs ... and they are awful and terrible as it does not give me the full extent of my work enjoy iPhone 5s!
Start from the beginning:
1 Streaming through technology "Air play".
"Air play" ceased to function properly! He was often disconnected from Apple tv and Apple airport express last generation. Apple tv 2g can not receive the signal from my iPhone 5s! And when it's all the same he gets a video playback does not last long, it just breaks and does not connect again! Helps to restart Apple TV and a hard reset by holding the button "HOME" button and "POWER". On the "Apple TV" is worth the latest firmware as these problems are manifested in the previous firmware of the device.
2 Built-in browser "Safari".
Tab in the "Safari" became constantly updated when I switch to another application or the other tabs! Apparent lack of memory (on iOS 7.1.2 with it all much better. At least when switching tabs does not re-update the previous tab).
Playing online video on non-optimized mobile site in the browser "Safari" really does not work! It is turned on and loaded almost to infinity! Sometimes just a black screen with an icon "Play" to be pressed at least 100 times, and the result is 0!
Scroll pages in the browser have become terribly sharp and smooth! on iOS 7.1.2 everything is fine, nice and smooth and no such bugs! Total confusion and thoughtfulness browser "Safari".
If the video still runs (for me equates to a miracle) then when rewinding the film is generally something strange ... Fast chooses how minutes and seconds I watch a movie (usually just starts playing from the beginning), or does not respond at all ... This is the same magic Apple? Unlikely.
3 multitasking menu (double-press "HOME").
Call multitasking (by double-clicking "HOME") began working with a delay, with a lag, c jerky animation, and sometimes even without it.
Control Center (which is called swipe upwards) was to slow down! Yes! That retard! Animation jumping shutter control center began play with tangible frame loss! If iPhone 5s under the control of OS iOS 7.1.2 everything happened smoothly, beautifully and dynamically in the iOS 8.0 it looks like on the iPhone 5 running iOS 7.C than strongly connected is not clear! Graphic differences from iOS iOS 7 8 almost equal to 0, and the speed of decline in almost 50%! How ?! Why ?! Why does my iPhone 5s become the iPhone 5 ?! This is an artificial slowing my device to increase the demand on the iPhone 6 or still glitch iOS 8.0 for iPhone 5s? Honey the company Apple, I really hope for the 2nd. Especially this shortfall fps animation curtain markedly if you open multitasking (acquired by double button "HOME") and call the control center and you'll see that the animation is playing choppy and not smooth! On IOS 7.1.2 this is not! Control center jumps smoothly and beautifully! On iOS 8.0 it happens all the time! Even if you turn off your favorite contacts and recent calls (I'm ashamed to say they thought) that appeared in iOS 8 (they are above programs on the multi-tasking) not solve the problem. As well, if you call the control center on the lock screen, then drop FPS will be very noticeable even to the untrained viewer (especially if you take two iPhone 5s one running iOS 7 and 8, the second on iOS and compare them on the forehead). If the Control Center click airdrop (air play) the animation of its appearance again played in spurts and not terribly nice and smoothly (especially noticeable on the lock screen and comparison of the forehead)! In a telephone call has been going absolutely shameless FPS drop a call center management and other activities!
And yes, for me it is a critical issue! I do not want the transition to iOS 9 my iPhone 5s turned to the iPhone 4 on iOS 7 (vid you all remember this terrible story?)! I want my iPhone 5s worked as smoothly as on iOS 7.1.2! Nor any justification for this inhibition iskuvsstvennoy I can not see! 8 beautiful iOS did not! graphic elements do not appear! So goes the Apple is doing this on purpose ?! We go down the list!
4 minor bugs that just break my brain and kill all the beauty of the use of "the best mobile operating system in the world"!
4.1. When a call comes in when you clicked the icon making a call the phone for about 2-3 seconds, vibrates and plays a melody. On iOS 7.1.2 ringtone and vibration stops as soon as you have accepted the challenge and in your ear does not play your ringtone by "imagine Dragons", cheeks beats you invented vibration in the style of "Tick-tonic."
4.2. When you look at the page on the Internet-phone terribly terribly strongly heated! A pair of piping hot! On iOS 7.1.2 is no such problem! Telephone hot, but not as much as on iOS 8.0!
4.3. Folder on the home screen opens with a delay of 0.5-1 second is the impact on the overall impression of iOS 8.0.
4.4. When you create a set (12 pieces) icons in one folder if dramatically open the folder and make swipe to the left then the following icons in this folder does not have time to boot up and are delayed by 1 second.
4.5. When you create a folder with 1-9 icons do if the above action fails then the animation (the same bug exists in iOS 7.1.2). It is very not nice aesthetically.
4.6. Scroll to your "Settings" felt terribly antsy. Although it is not only in the application "Settings" but also to the entire system and applications in general ...
4.7. Scroll to the Home screen has become less responsive to user actions all movements inogoda occur with jerky animation and some delay to the user.
4.8. Quite often, and without rational reason for going off the sensor device. That is, the screen does not respond to any user action! Helps pressing "HOME" or hard reset by holding the button "HOME" and "POWER".
4.9. Most people on the iPhone 5s lost communication with a mobile operator. Just go on and lost and because of this I have missed calls from their loved ones and friends (would cost you to be glad that I have not missed calls on business issues).
5.0. Many owners of iPhone 5s and iPhone 5 uhudzhenie complain about battery life. I honestly did not notice it, but we will not drop this off.
Outcome.
And now gets quite an interesting question, why? Why does my iPhone 5s began to slow? Why in the absence of graphical improvements are absolutely the same actions were reproduced with the loss of fps, slow down, lag, hover, fly? Why, if put next iPhone 5s on iOS 7.1.2 and exactly the same iPhone 5s on iOS 8.0 and pull the control panel to call multitasking bar, carry out all other actions I have described it on your device running iOS 7.1.2 it will work without any delays, lags, the deterioration in the responsiveness of the interface, reducing fps, and no departures from simple applications written directly by Apple? I see absolutely no any obstacles in the way to make the iPhone 5s to the operating system iOS 8.0 worked with the same smoothness, with the same responsiveness and speed as the iPhone 5s running iOS 7.1.2! I do not see what these restrictions are not!
There are many different bugs that I do not even remember now (as I write this text on emotions (positive) as able to roll back your iPhone 5s back to iOS 7.1.2, and he seemed to come alive with new life) and so far I have esteemed company APPLE does not eliminate these improvements do not, I will not go back to iOS 8.0! if the dispensation of these bugs, flaws, intentional degradation of the (almost identical in performance in comparison with the iPhone 6) IPhone 5s will not happen and the company APPLE will continue to apply to consumers of their products as a beta tester I will be forced to organize a petition and file a class action lawsuit in court not only in their own country (which is for the Russian Federation) but also in the United States and in other countries where people are just like me trying to deceive, mislead and force companies to buy new devices APPLE without having expressed any any more substantial explanation except as <iPhone 6 was 25% more powerful on with alignment with the iPhone 5s>!
P.s.
I hope Apple will still listen to their users and I also hope that it (Apple) still change his mind and will try in the near future to give users not-so-old devices (iPhone 5s, iPad Air, iPad mini Retina) and enjoy on all the new features of iOS 8 no lag, locked up, overheating, inhibited animation. Thank you for being there!
Ru.
Всем доброго времени суток! Я как и вы форумчане являюсь фанатом компании APPLE. Проживаю я в Российской Федерации. Начал свое знакомство с этой компанией в далеком 2010 году с устройства Ipad 2 тогда еще на ios 5. В январе 2014 я сделал себе подарок и купил iPhone 5s на OC IOS 7. Купил я его официально по официальной Российской цене которую выставила Apple точнее за 1100$. В нашей стране это очень большие деньги. На эти деньги я бы мог жить 3 месяца. По сути я стал обладателем топового (на тот момент) устройства от любимой компании Apple. Мой iPhone 5s прекрасно работал на ios 7. Иногда встречались легкие фризы анимации, и не критичные баги, но кто без греха? Любимой компании я был готов это простить так как вижу, что она старается быть лучше и не стоит на месте. Посмотрев презентацию WWDC на которой представили iOS 8 нас с вами уверяли, что все стало лучше, быстрее, функциональнее. Я твердо решил, что обновлю свой iPhone 5s до iOS 8.0... APPLE выпускает новую OC iOS 8... И я обновился! За красивыми словами, что нам говорили на презентации, за великолепными функциональными возможностями новой iOS скрывалось "нечто". И это "нечто" превратило мой телефон в... "тыкву"! Да! В ту самую тупую тыкву! И сейчас я объясню почему я думаю, что это тыква, а не роза.
Море багов... причем они ужасны и страшны так как не дают мне в полноценной мере насладится работой моего iPhone 5s!
Начнем по порядку:
1. Потоковая передача данных посредством технологии "Air play".
"Air play" перестал нормально работать! Он стал часто отсоединяться от Apple tv и Apple airport express последнего поколения. Apple tv 2g не может принять сигнал от моего iPhone 5s! А когда все же это у него получается то воспроизведение видео длится не долго оно просто обрывается и не дает подключиться повторно! Помогает перезагрузка Apple TV и жесткий сброс посредством удержания кнопки "HOME" и кнопки "POWER". На "Apple TV" стоит последняя прошивка так же эти проблемы проявлялись и на предыдущей прошивке устройства.
2. Встроенный в систему Браузер "Safari".
Вкладки в "Safari" стали постоянно обновляться когда я переключаюсь на другое приложение или на другие вкладки! Явная нехватка оперативной памяти (на iOS 7.1.2 с этим все гораздо лучше. по крайней мере при переключение вкладок не происходило повторное обновление предыдущей вкладки).
Воспроизведение онлайн видео на не оптимизированном для мобильных устройств сайте в браузере "Safari" толком не работает! Оно включается и загружается чуть ли не до бесконечности! Порой просто черный экран с иконкой "Play" на которою нажимай хоть 100 раз, а результата 0!
Пролистывание страниц в браузере стали до ужаса резкими и не плавными! на iOS 7.1.2 все прекрасно, плавно и красиво и таких багов нет! Общая заторможенность и задумчивость браузера "Safari".
Если видео все же запускается (что для меня приравнивается к чуду) то при перемотке фильма происходит вообще что-то непонятное... Перемотка сама выбирает с какой минуты и секунды мне смотреть фильм (чаще просто начинает воспроизводить все с самого начала) либо не реагирует вовсе... Эта та самая магия Apple? Непохоже.
3. Меню многозадачности (двойное нажатие кнопки "HOME").
Вызов многозадачности (посредством двойного нажатия кнопки "HOME") стал работать с задержкой, с лагом, c дерганой анимацией, а порой и вовсе без нее.
Центр управления (который вызывается свайпом снизу вверх) стал тормозить! Да! Именно тормозить! Анимация выпрыгивания шторки центра управления стала воспроизводиться с ощутимой потерей кадров! Если на iPhone 5s под управление OS iOS 7.1.2 все происходило плавно, красиво и динамично то в iOS 8.0 все выглядит как на iPhone 5 под управлением iOS 7.с чем это связанно решительно не понятно! Графические отличия iOS 7 от iOS 8 практически равны 0, а скорость работы сниженна практически на 50%! Как?! Почему?! Почему мой iPhone 5s стал iPhone 5?! Это искусственное замедление моего устройства для повышения спроса на iPhone 6 или все же недоработка iOS 8.0 для iPhone 5s? Дорогая компания Apple, я очень надеюсь на 2-е. Особенно эту нехватку fps в анимации шторки заметно если открыть многозадачность (посредством двойного нажития кнопки "HOME") и вызвать центр управления и вы увидите что анимация проигрывается рывками и не плавно! На IOS 7.1.2 такого нет! Центр управления выпрыгивает плавно и красиво! На iOS 8.0 это происходит постоянно! Даже если отключить избранные контакты и недавние вызовы (я грешным делом подумал на них) которые появились в iOS 8 (они находятся выше программ на панели многозадачности) проблему не решить. Так же, если вызвать центр управления на экране блокировки то падение FPS будет очень заметно даже для неподготовленного зрителя (особенно если взять два iPhone 5s один под управление iOS 7 и второй на iOS 8 и сравнить их в лоб). Если в центре управления нажать кнопку airdrop (air play) то анимация ее появления опять таки проиграется рывками и ужасно не красиво и не плавно (особенно заметно на экране блокировки и при сравнение в лоб)! При телефонном вызове происходит уже совсем уж бессовестное падение FPS при вызове центра управления и при других действиях!
И да, для меня это критичная проблема! Я не хочу чтобы при переходе на iOS 9 мой iPhone 5s превратился в iPhone 4 на iOS 7 (Вы видь все помните эту страшную историю?)! Я хочу чтобы мой iPhone 5s работал так же плавно как и на iOS 7.1.2! Ни каких оправданий для этой искувсственной заторможенности я не вижу! iOS 8 красивей не стала! графических элементов больше не появилось! Так выходит компания Apple делает это специально?! Идем дальше по списку!
4. мелкие баги которые просто разрывают мой мозг и убивают всю красоту использования "Самой лучшей мобильной операционной системы в мире"!
4.1. При входящем вызове когда вы нажали иконку принятия вызова телефон еще около 2-3 секунд вибрирует и проигрывает мелодию. На iOS 7.1.2 мелодия и вибрация останавливается как только вы приняли вызов и вам в ухо не играет ваш рингтон в исполнении "imagine Dragons", по щекам не бьет придуманная вами вибрации в стиле "Тик-тоник".
4.2. Когда смотришь страницы в интернете телефон ужасно-ужасно сильно греется! Парой обжигающе сильно! На iOS 7.1.2 такой проблемы нет! Телефон горячий, но не так сильно как на iOS 8.0!
4.3. Папки на домашнем экране открываются с задержкой в 0.5-1 секунду это сказывается на общем впечатлении от iOS 8.0.
4.4. При создании множества (12 штук) иконок в одной папке если резко открыть папку и сделать свайп влево то следующие иконки в этой папке не успевают загрузиться и отображаются с задержкой в 1 секунду.
4.5. При создании папки с 1-9 иконками если проделать описанное выше действие то произойдет сбой анимации (этот же баг есть и в iOS 7.1.2). Это крайне не приятно эстетически.
4.6. Пролистывание в приложении "Настройки" стало ужасно дерганым. Хотя не только в приложении "Настройки" но и по всей системе и в приложениях в целом...
4.7. Пролистывание на Домашнем экране стало менее отзывчивое на действия пользователя все движения иногода происходят с дерганой анимацией и какой-то задержкой на действия пользователя.
4.8. Довольно часто и без объяснимой причины происходит отключения сенсора устройства. То есть экран не реагирует ни на какие действия пользователя! Помогает нажатие кнопки "HOME" либо жесткий сброс посредством удержания кнопки "HOME" и "POWER".
4.9. Большинства людей на iPhone 5s пропадает связь с сотовым оператором. Просто берет и теряется и из за этого я уже пропускал звонки от своих близких и друзей (стоило бы вам порадоваться, что я не пропустил звонки по рабочим вопросам).
5.0. Многие обладатели iPhone 5s и iPhone 5 жалуются на ухуджение работы аккумулятора. Я честно говоря этого не заметил, но не будем сбрасывать этого со счетов.
Итог.
А теперь встает довольно интересный вопрос, почему? Почему мой iPhone 5s стал тормозить? Почему при отсутствии графических улучшений абсолютно одни и те же действия стали воспроизводится с потерей fps, тормозить, лагать, зависать, вылетать? Почему если положить рядом iPhone 5s на iOS 7.1.2 и точно такой же iPhone 5s на iOS 8.0 и вытянуть панель управление, вызвать панель многозадачности, провести все остальные действия описанные мною то на устройстве под управлением iOS 7.1.2 все будет работать без каких либо задержек, лагов, ухудшение в отзывчивости интерфейса, уменьшении fps и просто без вылетов из приложений написанных непосредственно компанией Apple? Я не вижу абсолютно ни каких преград в том чтобы сделать так чтобы iPhone 5s под управлением операционной системой iOS 8.0 работал с той же плавностью, с той же отзывчивостью и скоростью, что и iPhone 5s под управлением iOS 7.1.2! Не вижу от того, что этих ограничений нет!
Есть еще множество различных багов о которых я сейчас даже не вспомню (так как этот текст я пишу на эмоциях (положительных) так как смог откатить свой iPhone 5s обратно на iOS 7.1.2 и он как будто ожил новой жизнью) и пока глубокоуважаемая мною компания APPLE не устранит эти не доработки я не буду возвращаться обратно на iOS 8.0! если устроения этих багов, недоработок, умышленного ухудшения работы (практически одинакового по производительности в сравнении с iPhone 6) IPhone 5s не произойдет и компания APPLE будет и дальше относиться к потребителям своей продукции как к бета тестерам я буду вынужден организовать петицию и подать коллективный иск в суд не только в своей стране (коей является Российская Федерация) но и в США и в других странах где людей так же как и меня пытаются обмануть, ввести в заблуждение и заставить покупать новые устройства компании APPLE не дав на то ни каких более существенных объяснений кроме как < iPhone 6 стал на 25% мощнее по с равнению с iPhone 5s>!
P.s.
Я надеюсь компания Apple все еще прислушивается к своим пользователям и я так же надеюсь, что она (Apple) все же одумается и постарается в ближайшее время дать пользователям не таких уж и старых устройств (iPhone 5s, iPad Air, iPad mini Retina) наслаждаться и дальше всеми новыми возможностями операционной системы iOS 8 без лагов, подвисаний, перегревов, заторможенной анимации. Спасибо, что вы есть!

Agreed! This bug with the ringtone delay (№4.1) is really annoying

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions a

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions are for the computer to read. Both formats are, of course, readily recognized and indexed by Spotlight. Journal articles have two essential components with regards to a database: the topical content of the article itself, and the cited references to other scientific literature. While a PDF merely lists these references, the HTML version has, in addition, links to the cited items. Each link URL contains the digital object identifier (doi) for the item it points to. A doi is a unique string that points to one and only one object, and can be quite useful if rendered in a manner that enables indexing by Spotlight. Embedded URL's are, of course, ignored by Spotlight. As a result, HTML-formatted articles must be processed so that URL's are openly displayed as readable text before Spotlight will recognize them. Conversion to DOC format using MS Word, followed by conversion to RTF using Text Edit accomplishes this, but is quite labor intensive.
In the last few months, I have added about 3,500 articles to this collection, which means that any procedure for rendering URL's must be automated and able to process large batches of documents with minimal user oversight. This procedure needs to generate a separate file for each HTML document processed. Trials using Automator's "Get Specified Finder Items" and "Get Selected Finder Items", as well as "Ask For Finder Items" (along with "Get URLs From Web Pages") give unsatisfactory results. When provided with multiple input documents, these three commands generate output in which the URLs from multiple input items are merged into a single block, which yields a single file using "Create New Word Document" as the subsequent step. A one-to-one, input file to output file result can be obtained by processing one file at a time, but this requires manual selection of each item and one-at-a-time processing. What I need is a command that accepts multiple input documents, but processes them one at a time, generating a separate output for each file processed. Is there a way for Automator to do this?

Hi,
With the project all done, i'm preparing for the presentation. Managed to get my hands on a HD beamer for the night (Epason TW2000) and planning to do the presentation in HD.
That of course managed to bring up some problems. I posted a thread which i'll repost here . Sorry for the repost, i normally do not intend to do this, but since this thread is actually about the same thing, i'd like to ask the same question to you. The end version is in AfterEffects, but that actually doesn't alter the question. It's about export:
"I want to export my AE project of approx 30 min containing several HD files to a Blu Ray disc. The end goal is to project the video in HD quality using the Epson EMP-TW2000 projector. This projector is HD compatible.
To project the video I need to connect the beamer to a computer capable of playing a heavy HD file (1), OR burn the project to a BRD (2) and play it using a BRplayer.
I prefer option 2, so my question is: which would be the preferred export preset?
Project specs:
                    - 1920x1080 sq pix (16:9)
                    - 25 fps
                    - my imported video files (Prem.Pro sequences) are also 25 fps and are Progressive (!)
To export to a BRD compatible format, do i not encounter a big problem: my projectfiles are 25 fps and progressive, and I believe that the only Bluray preset dispaying 1920x1080 with 25 fps requests an INTERLACED video (I viewed the presets found on this forum, this thread)... There is also a Progr. format, BUT then you need 30 fps (29,...).
So, is there one dimension that can be changed without changing the content of the video, and if yes which one (either the interlacing or the fps).
I'm not very familiar with the whole Blu-ray thing, I hope that someone can help me out."
Please give it a look.
Thanks,
Jef

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

What is the SYNTAX for the user and group filters??? Is the HTML Ampersand token Amper A m p semicolon required in the filter

There seems to be quite a bit of confusion over the actual syntax for the user and group filters on the Forms Based Authentication Ldap Role and membership providers.. MSFT isn't really clear and there is a universal confusion in the blogsphere.
I the filters should the prefix be the ACTUAL Ampersand or the HTML token for an AMPERSAND.. I realize the in many cases the blogger might have inadvertently specified the html token when the bare naked ampersand was intended.. The question
therefore is : can a filter be taken directly from and ADSIEdit query and used as a filter or must the filter be made HTML safe by swapping out the AMERSAND with the HTML Token for AMERSAND before putting it into the configuration
for the LDAPRole/membership provider...
All science is either physics or stamp collecting

Hi GUYO,
I am not quite sure how we implement this on sharepoint side, as I did research and sharepoint may not have this feature to do this.
most of the LDAP for sharepoint may need to follow these steps in this article:
http://technet.microsoft.com/en-us/library/ee806890(v=office.15).aspx
http://blogs.msdn.com/b/sridhara/archive/2010/01/07/setting-up-fba-claims-in-sharepoint-2010-with-active-directory-membership-provider.aspxhttp://blogs.msdn.com/b/kaevans/archive/2013/01/31/configuring-ldap-for-fba-in-sharepoint-2010-or-sharepoint-2013-with-powershell.aspx
here is an example :
http://blogs.msdn.com/b/sharepoint__cloud/archive/2011/12/20/achieving-fba-with-adlds-amp-sharepoint-2010.aspx
if should this questions was at the ADSIEdit part, perhaps you can help us by opening a new thread at the AD foum
https://social.technet.microsoft.com/Forums/en-US/home?category=windowsserver
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

While trying to access my local network I get the message..."The page could not be opened because server cannot be found." This, after updating to Yosemite and paying (again) for the server app.

while trying to access my local network I get the message..."The page could not be opened because server cannot be found." This, after updating to Yosemite and paying (again) for the server app.

It's absolutley scandalous that a company with Apple's resources can let this happen. They should have staggered the release by region rather than opening the flood gates. The upgrade itself took me about 10 attempts to download it, and then I thought I was home free. That was until it rebooted and won't activate. It's over 2 hours now.
Scandalous!

I've installed iPhoto11 and when opening for the 1st time it says that needs to upgrade my library and it is doing this since yesterday. Is this right??

I've installed iPhoto11 and when opening for the 1st time it says that needs to upgrade my library and it is doing this task since yesterday. Is this right??

No. Quit and try again. If that fails again,
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Multiple Passed Authentication and Failed Attempts for the users

Similar Messages

Maybe you are looking for