PKI view , AIA and CDP locatiion for the RootCA has red crossover " unable to download"
I am trying to create a PKI infrastructure on winserver2008R2 enterprise as follows
offline ROOT CA---Standalone
Online Intermediate CA -- enterprise
PROBLEM:
on the intermediate CA: using enterprise PKI view , AIA and CDP locatiion for the RootCA has red crossover " unable to download"but enterprise pki view "manage AD container" indicated the AIA and CDP container
had OK for the root CA CDP and AIA.
Any help will be appreciated
INSTALLATION STEPS :
i performed the ffg on offline RootCA
create the CA policy policy file and store in windows folder
install ADCS
run post installation script
The Certificate Service was successful and saw a green icon in the console
I performed the ffg on online enterprise CA
create the CA policy policy file and store in windows folder
install ADCS
i successfully published the root CA cert and CRL in the local store and AD. i saw the ffg message upon completion
CertUtil: -addstore command completed successfully.
CertUtil: -dsPublish command completed successfully.
install ADCS
below is the output for getreg ( CRL and AIA)
C:\Users\Administrator.GORYEAL>certutil -getreg CA\CRLPublicationURLs
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CertSvc\Configuration\GINTC
A\CRLPublicationURLs:
CRLPublicationURLs REG_MULTI_SZ =
0: 65:C:\Windows\system32\CertSrv\CertEnroll\%3%8%9.crl
CSURL_SERVERPUBLISH -- 1
CSURL_SERVERPUBLISHDELTA -- 40 (64)
1: 79:ldap:///CN=%7%8,CN=%2,CN=CDP,CN=Public Key Services,CN=Services,%6%10
CSURL_SERVERPUBLISH -- 1
CSURL_ADDTOCERTCDP -- 2
CSURL_ADDTOFRESHESTCRL -- 4
CSURL_ADDTOCRLCDP -- 8
CSURL_SERVERPUBLISHDELTA -- 40 (64)
2: 0:http://%1/CertEnroll/%3%8%9.crl
3: 0:file://%1/CertEnroll/%3%8%9.crl
4: 65:file://\\www\Certdata\%3%8%9.crl
CSURL_SERVERPUBLISH -- 1
CSURL_SERVERPUBLISHDELTA -- 40 (64)
CertUtil: -getreg command completed successfully.
C:\Users\Administrator.GORYEAL>certutil -getreg CA\CACertPublicationURLs
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CertSvc\Configuration\GINTC
A\CACertPublicationURLs:
CACertPublicationURLs REG_MULTI_SZ =
0: 1:C:\Windows\system32\CertSrv\CertEnroll\%1_%3%4.crt
CSURL_SERVERPUBLISH -- 1
1: 3:ldap:///CN=%7,CN=AIA,CN=Public Key Services,CN=Services,%6%11
CSURL_SERVERPUBLISH -- 1
CSURL_ADDTOCERTCDP -- 2
2: 0:http://%1/CertEnroll/%1_%3%4.crt
3: 0:file://%1/CertEnroll/%1_%3%4.crt
CertUtil: -getreg command completed successfully.
when i ran certutil -URL http://www.goryeal.com/CERTDATA/GROOTCA.crl
i saw a status message of OK
when i paste the url(http://www.goryeal.com/CERTDATA/GROOTCA.crl) from pki view in the browser i got the message:
404 - File or directory not found
But when i copy the url(http://www.goryeal.com/CERTDATA/) in the browser , i was able to see the root ca CRL :
I revoked CA exchange cert and issue a new one but still no luck. Below is the verification for the ca exchange cert:
certutil.exe -verify -urlfetch
c:\ca.cer
Issuer:
CN=GINTCA
DC=goryeal
DC=com
Subject:
CN=GINTCA-Xchg
DC=goryeal
DC=com
Cert Serial Number: 61db778400000000000b
dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN_EXCLUDE_ROOT (0x40000000)
HCCE_LOCAL_MACHINE
CERT_CHAIN_POLICY_BASE
-------- CERT_CHAIN_CONTEXT --------
ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
ChainContext.dwRevocationFreshnessTime: 6 Days, 21 Hours, 50 Minutes, 11 Seconds
SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
SimpleChain.dwRevocationFreshnessTime: 6 Days, 21 Hours, 50 Minutes, 11 Seconds
CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=GINTCA, DC=goryeal, DC=com
NotBefore: 4/2/2014 5:00 PM
NotAfter: 4/9/2014 5:10 PM
Subject: CN=GINTCA-Xchg, DC=goryeal, DC=com
Serial: 61db778400000000000b
Template: CAExchange
Template: CA Exchange
5f c7 75 f7 e9 da 4b 96 ea 05 48 f2 2f 49 0d 96 b8 d0 f7 16
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA
Verified "Certificate (0)" Time: 0
[0.0] ldap:///CN=GINTCA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?cACertificate?base?objectClass=certificationAuthority
---------------- Certificate CDP
Verified "Base CRL (06)" Time: 0
[0.0] ldap:///CN=GINTCA,CN=INTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?certificateRevocationList?base?objectClass=cRLDistributionPoint
Verified "Delta CRL (06)" Time: 0
[0.0.0] ldap:///CN=GINTCA,CN=INTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?deltaRevocationList?base?objectClass=cRLDistributionPoint
---------------- Base CRL CDP
OK "Delta CRL (06)" Time: 0
[0.0] ldap:///CN=GINTCA,CN=INTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?deltaRevocationList?base?objectClass=cRLDistributionPoint
---------------- Certificate OCSP
No URLs "None" Time: 0
CRL 06:
Issuer: CN=GINTCA, DC=goryeal, DC=com
bc c0 e1 8c e1 4c 18 34 5f 06 ca c1 f2 a0 3b 4d 58 9f 27 70
Delta CRL 06:
Issuer: CN=GINTCA, DC=goryeal, DC=com
69 cf 42 09 59 48 3f 07 bf b7 8a 4c 01 a6 45 5f 13 87 da 1b
Issuance[0] = 1.2.3.4.1455.67.89.5
Application[0] = 1.3.6.1.4.1.311.21.5 Private Key Archival
CertContext[0][1]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=GROOTCA
NotBefore: 3/26/2014 8:01 PM
NotAfter: 3/20/2019 8:38 PM
Subject: CN=GINTCA, DC=goryeal, DC=com
Serial: 1297cd88000000000004
Template: SubCA
a4 96 15 fd 62 c1 1c 86 db 21 15 a7 d4 b4 0e 16 8f 03 2c de
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA
Verified "Certificate (0)" Time: 0
[0.0] ldap:///CN=GROOTCA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?cACertificate?base?objectClass=certificationAuthority
Verified "Certificate (0)" Time: 0
[1.0] http://www.goryeal.com/Certdata/ROOTCA_GROOTCA.crt
---------------- Certificate CDP
Verified "Base CRL (06)" Time: 0
[0.0] ldap:///CN=GROOTCA,CN=ROOTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?certificateRevocationList?base?objectClass=cRLDistributionPoint
Failed "CDP" Time: 0
Error retrieving URL: Error 0x80190194 (-2145844844)
http://www.goryeal.com/Cerdata/GROOTCA.crl
---------------- Base CRL CDP
No URLs "None" Time: 0
---------------- Certificate OCSP
No URLs "None" Time: 0
CRL 06:
Issuer: CN=GROOTCA
f7 3d fb a7 12 bf f1 b5 e9 35 b7 a1 2b 17 2a 28 29 36 c6 8a
Issuance[0] = 1.2.3.4.1455.67.89.5
CertContext[0][2]: dwInfoStatus=10c dwErrorStatus=0
Issuer: CN=GROOTCA
NotBefore: 3/20/2014 8:28 PM
NotAfter: 3/20/2019 8:38 PM
Subject: CN=GROOTCA
Serial: 2157e0150f7e149e49295666612464ef
b5 a8 4c e1 64 9d b0 aa c5 e4 b7 b0 4f 5e fe e3 99 aa 61 de
Element.dwInfoStatus = CERT_TRUST_HAS_NAME_MATCH_ISSUER (0x4)
Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA
No URLs "None" Time: 0
---------------- Certificate CDP
No URLs "None" Time: 0
---------------- Certificate OCSP
No URLs "None" Time: 0
Issuance[0] = 1.2.3.4.1455.67.89.5
Exclude leaf cert:
e8 5b f7 0b 59 b4 84 97 87 96 1b f1 39 9b 15 14 24 84 d0 77
Full chain:
ca 29 87 01 d8 6f e6 28 d7 16 a9 5c 81 74 d3 b8 1e c9 44 53
Verified Issuance Policies:
1.2.3.4.1455.67.89.5
Verified Application Policies:
1.3.6.1.4.1.311.21.5 Private Key Archival
Leaf certificate revocation check passed
CertUtil: -verify command completed successfully.
Similar Messages
-
How can I view my full billing history for the app and music stores without iTunes installed?
I just received an email receipt from Paypal showing a $12.99 purchase from iTunes. I almost NEVER purchase anything over around five dollars in the app or music store. Since PayPal does not show what this purchase was for, I have not received the receipt from Apple yet, and I cannot find anyway to look up online what this purchase was for....I need help to find out ASAP what this purchase was. If my account has been compromised or if I have been incorrectly charged for something, I would like to get the issue handled immediately. I do not want to install iTunes on my PC (nor should I have to for Pete's sake), but I cannot see anything recent at all in my app or music history on my iPad (not that I would ever purchase anything for $12.99 anyway...I just don't). Thanks in advance for any tips!
How can I view my full billing history for the app and music stores without iTunes installed?
No.
If my account has been compromised
If you even think this may have happened, immediately change your password.
See this -> Apple ID: Changing your password -
everytime i click on the view in itunes button/link on the itunes website so that i can download apps, nothing happens. I accendentally clicked on the button other than open itunes and now i cant fix it
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iTunes and App Stores and sifnout and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Different LOVs in af:query and af:form for the same VO attribute
Hi,
We need to display different LOVs in af:query and af:form for the same attribute in VO.
Is it possible to use LOV Switcher for this ?
What condition can we use in LOV Switcher attribute to check if it is View Critearia row or VO row ?We have a VO attribute "User" which needs to be displayed as LOV in a Search Panel ( af:query component created using View Critearia ) and in a af:form.
When this VO attribute is displayed in search panel, in LOV, we need to show all users.
When this VO attribute "User" is displayed in a form for editing, in LOV, we need to show only active users.
For this, we created two LOVs "ActiveUsersLOV" ( which shows only active users ) and "AllUsersLOV" ( which shows all users ) on VO attribute "User".
LOVSwitcher attribute should return "ActiveUsersLOV" if the LOV is displayed in form and "AllUsersLOV" if the LOV is displayed in search panel. -
I hired a commercial artist to create a color image for the cover of a self published book. I want a black and white image for the inside. The commercial artist has not responded to this request. How do I determine the format of the color image, I'm guessing it's Illustrator's formatting but I don't know. How can I find out if Illustrator will open the file and allow alterations? The image opens only in Apple's Pages software?
rons,
It seems that all you have is a raster image, presumable PNG24 or JPEG, in RGB.
It may have been created as raster artwork in Photoshop, or it may have been created as vector artwork with the help of Illy, or as a mixture of vector and raster artwork in either application, or both combined.
If you just need to have a raster representation in black and white based on the current colour image, you may try this, in a new RGB document (View>Smart Guides are your friends):
1) File>Place the image (you may tick Link or untick and have it embedded);
2) Create a rectangle with black fill (R = G = B = 0), at least as large as the image, and place it behind the image (you may ClickDrag with the Rectangle Tool between opposite corners, then Ctrl/Cmd+X+B);
3) Select all and in the Transparnecy palette flyout click Make Opacity Mask with both Clip and Invert Mask ticked. -
How can I view my iTunes purchase history for the last year?
How can I view my iTunes purchase history for the last year?
(My account in the iTunes store will only give me my RECENT purchases)Sign into your Account > Click on your account name > Click on Account > Purchase History
iTunes Store & Mac App Store: Seeing your purchase history and order numbers - http://support.apple.com/kb/HT2727
Direct link - https://phobos.apple.com/WebObjects/MZFinance.woa/wa/purchaseHistory -
Hi fellow peeps
I have been looking at the elgato tivizan its a solution for dvb t signals but not the dvb s2 and also even though is only for dvb t which is suffiace it only lasts foronly 3.5 hours of freeview tv not good enough
Although i like there software elganto app its not enough viewing to last
i would like you guys to please provide me with a solution for both dvb t and dvb s2 for the ipad 1 or 2
i would also like a solution for be able to view my recordings from my pc yes its not a mac to the ipad without a internet connection
thanks if you need any more info please let me know
Many thanks in advanceTry searching google and use different combinations of words like:
ipad iphone timer
Maybe something will come up, but I'm thinking no....... -
I have bought a Season pass for The Big Bang Theory. I have downloaded alle recent Epiodes without any Problems. But now... i can't download the latest Version for free. Itunes doesn't recognize my Season pass and let's me buy it again. Whats going? Do I miss something?
Best regards,
MicheleContact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
I've had my iPod 5th gen for a few months now and out of nowhere the microphone has stopped working.
I've had my iPod 5th gen for a few months now and out of nowhere the microphone has stopped working. It won't pick up anything, I can't use it for recording, face time, siri or anything else. Every time I try and record and play it back its just all fuzzy, is there anyway of fixing it without having to send it off for repair?
- Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the tope edge near the center.
- Open the Voice Memos app and see if you see movement on the VU meter needle with changes in noise level trying to be recorded.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
You can also send it to Apple. -
Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????
Requirements for iPhone 5:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later
The highest version of iTunes you can install is 10.6.3 which will not sync with the iPhone 5.
Roger Wilmut1 wrote:
It's always a good idea to check the requirements before purchasing.
The person I spoke with at 1-800-MY-APPLE gave me totally different info...she said the iPhone 5 would in fact sync with the older version of iTunes and that I could restore from my previous iPhone 4 backup and also bring in my music that way. Hmmm....
I'm inclined to go by the published specs, but now I have to jump thru a bunch of hoops I wasn't expecting to. -
Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet and it could not detect the the ip address after i input the correct address on "Connect to Server" window. Please help! Urgent! Thanks
I did not say it is not possible.
I said if your company networks are monopolizing both ports, you should talk to them about what options are available.
Maybe you can get the company Intranet over wireless if you change some configuration items such as Subnet Mask.
Maybe you can get on the Internet over Ethernet.
You really need to ask them, and do not let them blow you off because you have a Mac. If they balk, ask them how it would be done on a PC (becasue it will be the same on a Mac). -
I recently had to get a new windows computer, old one crashed. My tech guy got all my itunes library over to the new one, and all my songs are there. However, some won't play and ask me for the password for the apple id they were purchased under. 2 of these ids are obsolete and I have no access to those accts. The songs all played on my old computer without prompting me for a password.
Any ideas how I can get around this hassle and get them all to play? We're talking about 800 songs that are being obstinate. The new computer is authorized under my "new" Apple id, which I have used for years.Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases. -
On my Macbook pro 15, 2011, System Profiler is suggesting that it uses SATA III for the hard drive and SATA II for the Optical Drive. Is that true?
That is correct. The tech specs indicate:
Hard Drive Interface
6.0 Gbps Serial ATA (SATA)
Optical Drive Interface
3.0 or 6.0 Gbps Serial ATA (SATA) -
*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum
Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems -
I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"
Check out this thread: https://discussions.apple.com/thread/1421870
It may mean you either your Event or your Project. Have you moved any of the files in the Finder by any chance? That error may come up if you moved anything outside of iMovie. Do you get an error message when you choose Share>Export to iMovie (choose medium size) and save it to the Desktop? If you can export it to the desktop, you can pull that file into iDVD separately and still make it work.
Maybe you are looking for
-
Use of ABAP expression in the Send Mail Header and Text
Hi Workflow Gurus, I have a requirement wherein I have to inform the Manager of a user that his/her request for leave availment has been approved. However, we need to show the users name for the Manager to easily identify the user. Now, I checked the
-
How can I add a person to an event (and send that person an invite) without resending the meeting invitation to all participants?
-
URL to download BO XI 3.1 SP3 Integration kit for SAP Solutions
HI I have Installed BO XI 3.1 SP3 Enterprise in the server.I want to Install BO XI 3.1 SP3 Integration kit for SAP solutions. 1)I want to know what is the order of Installations i need to install in case of Crystal Reports and Xcelsius,BI,SAP GUI. 2)
-
I just posted my first site with iWeb and on my home page I want to use the RSS widget to display spinets from my blog page on the same site. I have published the site to my FTP host and now the site is live. (www.thezumbacrew.com) Now that it is liv
-
How can I re-install 10.7.2 from 10.7.3 from the cloud?
is this possible? Having Wifi issues ever since the latest upgrade to 7.3. I want to re-install 7.2 She has a MacBook Air SSD Mid 11 production My Grand-daughter never did a backup with Time Machine. She can backup her files now. And the easiest way