Multiple PF STATUS

Hi,
I have a problem in using the PF STATUS,
i am using a pf statusin at selection-screen output and when i execute a program i can see the buttons
in the selection screen,after that when i enter the values in the selction screen and i press a button it will show a output in ALV based on the selection values,and here i want to add some buttons to neviagae to other screen,i uesed seperate pf-status for ALV Aand selection screen but for me it is showing the same buttons selection screen buttons in the ALV output also.so help me to solve this issue.
Thanks,
Deesanth

hi,
for alv grids, this is the code
call function 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = repname
i_callback_pf_status_set = form routine for pf status
i_callback_user_command = form routine for user command
FORM (routine name ) USING rt_extab TYPE slis_t_extab.
SET PF-STATUS pf status name.
ENDFORM.
make sure that you are creating the pf status by using the tcode se41 for that program
regards
Srinivas M.

Similar Messages

Status Profile: Multiple Active Statuses

I have created a status profile through BS02 and assigned to a couple of Sales Document Types.
After implementing, I have found that there can be multiple active statuses. This is not a desired result.
1. Is there a way to control the profile, so that only one status CAN be active?
2. Is there a way to "fix" the orders which currently have multiple statuses?
Thanks.

Hi Tom,
after creating status u need to assign status to sales document.the particular status work for that sales document only.Go to VOV8 in transaction flow tab u enter ur status at status profile field and save the document.
Please do check the status how u maitained Ex.for qotation bolck,order block,delivery block... assign appropriate status to the sales document.
Hope this may solve ur issue.
Regards,
Reddyy

Checking multiple Service status using PowerShell Workflow

Hello,
I am planning to check status of multiple services for a list of servers using Parallel. I am finding it difficult to map an object for a computer with service's status with the main object.
Below is the code:
Workflow Check-Services
PARAM([string[]]$SvCName,[string[]]$SRVList)
foreach -parallel ($computer in $SRVList)
InlineScript
$Out = @()
foreach ($service in $SvCName)
$props=[ordered]@{
ComputerName=$USING:computer;
ServiceName=$USING:service
StartUpMode=$null
State=$null }
Try
$props.StartUpMode=Get-WmiObject -class Win32_Service -ComputerName $USING:computer -ErrorAction 'Stop' | Where-Object{$_.Name -eq $USING:service} | Select-Object -ExpandProperty StartMode
if ($props.StartUpMode -eq $null) { $props.StartUpMode = "Service does not exist" }
Catch
$props.StartUpMode="Error"
Try
$props.State=Get-WmiObject -class Win32_Service -ComputerName $USING:computer -ErrorAction 'Stop' | Where-Object{$_.Name -eq $USING:service} | Select-Object -ExpandProperty State
if ($props.State -eq $null) { $props.State = "Service does not exist" }
Catch
$props.State="Error"
$Out += New-Object -TypeName PSObject -Property $props
Please help.
Thanks in advance.
Rajiv

YOU have to learn how variables work in a workflow and how to structure PowerShell correctly. You are writing too much code because you have not understood the basics yet.
Workflow Check-Services{
Param(
[string[]]$SvCName,
[string[]]$SRVList
foreach -parallel ($computer in $SRVList){
InlineScript{
foreach ($service in $using:SvCName){
$props=[ordered]@{
ComputerName=$USING:computer
ServiceName=$service
StartMode=$null
State='Not Found'
if($s=Get-WmiObject -Filter "Name='$service'" -class Win32_Service -ComputerName $USING:computer){
$props.State=$s.State
$props.StartMode=$s.StartMode
New-Object -TypeName PSObject -Property $props
When you can make your code more readable it will be easier to see the mistakes. You had numerous errors. Go back and compare the code line by line very carefully until you understand what I changed. Ask if you cannot understand why I made
the change.
¯\_(ツ)_/¯

ITunes Match leaves ripped songs in multiple iCloud status states

Itunes Match seems to have made a complete mess of my Library. I had to restart match several times, and in the end it looked like it was about to complete but when I came back to it, I found that is had started the whole matching process again. Now I see most of my songs ripped from CD duplicated in multiple iCloud states. Most of my ripped songs appear duplicated as Uploaded and also as greyed out Waiting status. Some appear duplicated as Uploaded and Matched. Some of my music is duplicated as both in Matched state, one with the iCloud download option and other without. As far as I can tell, nearly all my own ripped tracks appear as duplicates with different iClouds status in one form or another. Purchased tracks from iTunes are fine with no duplicates. What a mess!
I seems that during these multiple attempts to match iCloud was getting different results each time and I ended up with a hodgepodge of duplicates. I have tried quitting iTunes and coming back in. I have updated match, it went quickly and made no changes. I have turned off match and then put it back on (prompted to add the computer) - no change.   How do I clean out this mess?
Note: I worked with a separate iTunes Library to to the match. My main library contains songs in both AAC and Apple Lossless formats. I first tried matching that library and realized that it was going to give me duplicates. So I created a new empty Library and deleted my iCloud tracks to reset it. Then I opened a custom library with just my AAC format files to do the match. This seemed to work although as I noted it got stock a couple times and then seemed to repeat the match process in the end. Note these multiple libraries point to the same media files. Fortunately it doesn't look like I have lost any original tracks, but the display is very messy with all the duplicates.
Are these iCloud states stored locally where I could delete a file and then reopen the library I wish to match and update the matches to refresh the iCloud status and hopefully clear out all the duplicate listings? I am hoping I don't need to start over since this took two days to do. But if I do, what must be done to start from a clean state. In addition to clearing out iCloud via deleting from an empty library, are there other local files that need to be purged?

Don't feel bad -- I'm running iTM on Windows XP and it's clearly not listed as supported either.       Are some of those dups greyed out? I've had that issue if I tried to match and then killed the process before it completed. If so, you might need to clear all them out before you re-run.   In other words, if you create a new library and see a bunch of iCloud stuff when you enable iTM, you might want to go through and clean up iCloud before you attempt any more local matching on your end.
The only real problem I see with 10.5.8 (or XP for that matter) is that if you contact Apple directly, they might suggest upgrading as the first step since it's not listed as supported.   Unfortunately it is what it is and Apple, like any other large tech company has to set EOL dates for certain OS's.

Read multiple axis status

The problem is the slowness of some commands in Labview 8.2 (winxp and PXI-8105 controller)
I am trying to control the speed of a three axis robot using a PXI-7350 motion controller, but I need to update very fastly the control loop (1-2ms)
I found that the more time consuming functions are "read per axis status" and "load velocity".
These are probably the main issues to be considered
1. I need only to read the "motor off", "following error", "Move Complete" while the "read per axis status"returns many other variables.
2. Both the vi must be called three times, one time for each axis.
Is it possible to build a single vi that, using a single command, queries the motion controller only for few specified variables and sets all the axis velocities?
In case, the variables are:
"motor off"
"following error"
"Move Complete"
"vector space position"
Thanks

The application is: to move the end effector as a function of an
analog feedback signal, avoiding auto-collision (like moving a robot
with a joystick).
The problem is that the signal is correlated to
the motor displacements via a unlinear process so the control board
cannot be configured using that signal. I have to measure the signal
and to calculate on the fly the velocities of the motor that make the
end effector follows the feedback signal. I need to optimize the
"control loop" in order to avoid vibrations, jitter and to permit the
PXI to make other things like data communication with other pc in the
network. Another important issue is the critical routine for
auto-collision avoiding: the robot must stop as soon as particular
combination of axes position occurs.
It's incredible, I
spent so much time in optimizing the kinematic calculations (a 9x9
non-linear sistem of equations solved in 2ms) and now I see that the
critical routine is the communication between PXI-controller and motion
controller!!!
(I know that the best solution would be to
build a motion controller by myself using a NI-FPGA device, but I
really don't know how to implement a matrix inversion calculation on a
FPGA processor...)
Fabrizio Patanè

How to find multiple transport status

I have a list of 800 transports (Released from Dev) .Now i wanted to check the status of this transports(Upto where it is moved). Is there any option in sap to check the details in one shot..

Hi,
the use of this forum is frequently misunderstood:
This is an expert forum for questions around the SAP Transportation Management (SAP TM) solution that allows to plan real world logistics like moving of pallets in containers, finding routes for trucks, scheduling rail cars or calculating freight costs for an ocean shipment. [Homepage] Questions regarding Software Logistics, Transport of customizing entries, copying of system settings between development and quality management systems should not be placed here.
The Transports you are asking about is misplaced - though answered - here.
Regards
Clemens

How to read status of a newly created notification

Hello All,
I have implemented a BTE for the event PM000010 - Update Notification.
Now my problem is that I wish to read the existing statuses on the notification.
This works fine if the notification already existed before.
However, if the notification is newly created, then Function Modules STATUS_CHECK and STATUS_READ do not work.
This is only if the notification is newly created.
I am particularly interested to know if the status Notification In Process and Notification Completed are present on the order.
How do I achieve this since STATUS_CHECK and STATUS_READ are not able to fetch the statuses when the notification is newly created?
Thanks,
Mithun

hi
check out the below details
Where to get the table which is having user status with Notiifcation number. (not the system status).
By : Selva
1. From table QMEL get OBJNR(object number) using the QMNUM( notification number).
2. Using this OBJNR get STSMA( Status Profile) from table JSTO.
3. Using the OBJNR get STAT(object status) from table JEST.
You may/ may not get multiple object status for an Object number.
System status number will start from E.
User status number will start from I.
4. To get the text of the status, use the status number (STAT) and STSMA to get the status text from table TJ30T.
We have done this and working fine.

Operation status 'Fixed' in Production order

Hello all,
We are facing an issue with Operation Status 'Fixed'. If we go to transaction /sapapo/rrp3 and double click on Production Order (R). Then clcik on Operation , say 0100, at right side you will see multiple Operation status. One of them is 'Fixed'. We can make this indicator active ny fixing the order in planning board (right click=> Fix).
Here we are facing an issue. We are not fixing any order through planning board and still I see Operation status 'Fixed'. Even I unfix it, next day it gets fixed automatically. I suspect that either any job in APO or R/3 do this activity. Please note that in this case 'Date_Fixed' indicator is not checked. Like when you fix the order from planning baord, system check the checkbox for 'Date_Fixed" and for operation status 'Fixed'. In our case only Operation status becomes 'Fixed.
Please let me know what are the different ways to fix the operation status.
Regards,
Nitin

Thanks for the reply.
As you mentioned, if the operation is scheduled at non-working hours then it gets fixed. I checked with the user and they confimred that they are not using the non production hour while rescheduling the order. It means they are not using the check box of non-working hour from DS startegy or Heuristic.
Please let me know what are the different possibilities which can schedule the operation in non-working hours.

U00BFMultiple user status for WBS Element?

Hello,
I need to create multiple user status for a WBS element.
I'm using the BAPI: BAPI_BUS2054_SET_STATUS
CALL FUNCTION 'BAPI_BUS2054_SET_STATUS'
     Importing
       return = ls_returnbapi1
    TABLES
I_WBS_SYSTEM_STATUS =
        i_wbs_user_status = it_wbs_user_status"--> This table contais 2 record, with the same WBS elements and diferent status
       e_result = it_result.
I put several rows (two) in the table it_wbs_user_status., I put two rows, the WBS elements for the same item with two different status, but I get error because it says that the WBS element is repeated.
¿Can you have multiple user status for the same element PEP? I try it in the transaction CJ20N too, and I don't Know.
Thanks.

In transaction CJ20N you can change user status for each WBS elements.
Menu --> Edit --> Status --> User Status --> you can choise betwen "Set" or "Set & Pass On".
I want BAPI, function , etc.... that do the same thar "Set" , not "Set & Pass On".
BAPI_BUS2054_SET_STATUS = "Set & Pass On"
Thanks

Multiple workflow columns are creating when the workflow is started

Hi,
I have created the workflow based on "Document" content type and have deployed and associated it to it's children content types(CT1, CT2, CT3), Later i have added documents(Doc1 based on CT1, Doc2 based on CT2, Doc3 based on CT3) in the document
library and run the workflow and they are running fine.
But the problem is that, whenever i run the workflow on the new document which is based on different content type than earlier, then a new "workflow status"column is getting created instead of using the already existing workflow status column.
This behavior is happening only when i tried to associate workflow from code and when i manually associate directly in the site it works fine.
Does anyone know how I would go about this?
Chakradhar

Hi Chakradhar,
According to your description, my understanding is that a same workflow status column was created when running workflow on a new document.
Did you re-publish and re-associate multiple versions of workflow to the content type?
If yes, then multiple workflow status columns would be created on the SharePoint List.
In addition, if we ever delete the workflow association to the content type or list and re-associate later to the content type or list, workflow status columns created by the previous association gets left behind.
I recommend to make sure that the workflow has not been re-published and re-associated.
You can delete the extra Workflow Status Column in the list:
http://nikpatel.net/2010/08/07/delete-orphaned-workflow-status-columns-from-sharepoint-list-views/
http://blogs.msdn.com/b/valdon/archive/2009/05/05/removing-extra-workflow-status-column-in-default-view.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Transport multiple FSG

Hello,
I need to change multiple Field Status Groups (65 of them - need to change a field from optional to required) for a Field status variant. I would like to know if there is a way to transport all the changes using a single transport request as each time i try to save the field status group a transport request is generated.
Thanks,
Charuni

Hi
For the first change..create a transport request.
From the next donot create any transport request..the old request pops up default and you can continue saving changes under the same request number.
Regards
A

Multiple Steps Verification

Hi,
How can I get multiple steps status from TestStand? I have 20+ pass/fail steps in code and need to update one station global array based on the result status. Example of my sequence given below for better understanding.
Step1: Action 1
Step 2: Action 2
Step 3: Test 1 (Pass/Fail)
Step 4: Test 2 (Pass/Fail)
Step 5: Action 3
Step 6: Test 3 (Numeric Test)
Step 7: Test 4 (String Test)
Step 8: Test 5 (Pass/Fail)
Step 9: Action 4
Step 10: Test 6 (Pass/Fail)
In this sequence, if Test 1, 2, 6 passes, I need to update one Station global (array element 1); if Test 3, 5, 6 passes, need to update Station global (array element 2) and Test 4, 6 passes Station global (array element 3). How can I implement it? At present we are doing with ANDing unique number of steps status with “if” condition.
Thanks,
Sanad MM

You have Result array at runtime, and there are all status of steps, then you u need to write expression to check them and do actions on stationglobals

0NOTIFICATN_ATTR datasource - how it get the system and user status

Guys,
I have 0NOTIFICATN_ATTR datasource bringing master data attribute of Notification document into BW. I saw it also bring the document system status and user status. But it only bring in the first status for each. i.e. for a notification document, it can has multiple system status (e.g. ATCO DLFL ...). this extractor only bring in 'ATCO'. while compare to the status DLFL (deletion flag), ATCO didn't really matter again.
So, i am trying to find out how this datasource extract the status, how can i change the status field into a 40 chars field so i can keep all active status (as it shows in ECC, when user display the notification document status). Did anyone solve this case before?
Thanks for the help.

Hi,
watch the following thread.
how to extract equipment status in to bw
and please refer following article by Vamsi
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/301941a0-25b4-2d10-6eb9-9758cbc28559
It would be very useful.
Thanks.

STATUS TABLE(urgent) More explainatory

Hi everybody,
-Let me tell you a bit more!!!!.
-In tcode-IW22, when u see any notification, u will see a status field of 40 characters with values like ATCO, NOPR, ORAS etc.
-Field is on the extreme top having technical ch. ( RIWO00-STTXT )-> name of structure with field.
-I m not able to find the corresponding table.
I wish u understand yaar.
cheers
Message was edited by:
        PRADEEP PHOGAT

Hi Pradeep,
Follow these steps to get the system status or the user status for a particular notification:
1. From table QMEL get OBJNR(object number) using the QMNUM( notification number.
2. using this OBJNR get STSMA( Status Profile) from table JSTO.
3. Using the OBJNR get STAT(object status) from table JEST.
   You may/ may not get multiple object status for an Object number.
   System status number will start from E.
   user status number will start from I.
4. To get the text of the status, use the status number (STAT) and STSMA to get the status text from table TJ30T.
I am sure this will solve your problem.
Regards,
Sonal
P.s. Reward points if helpful!

Enable Multiple Stapled OCSP Responses in IIS

I would like to configure IIS to send multiple stapled OCSP responses when sending its certificate chain to a web client at the start of an SSL/TLS connection. Currently, IIS only sends the OCSP response (signed indication from the issuing CA
that the certificate is still valid and not revoked) for the server certificate, but doesn't send it for the intermediate certificates.
For instance, if my IIS web server certificate is issued by the Entrust CA, it may be signed by the Entrust intermediate certificate "Entrust L1C", which is then signed by the Entrust root CA certificate "Entrust 2048". In that
circumstance, IIS is only sending the client the OCSP status for the server certificate, but not the OCSP validation status for the "Entrust L1C" certificate. So, the web client doesn't have to currently do an OCSP query to the Entrust
CA for the server certificate (since the web server sends that OCSP response to the web client), but does have to do an OCSP query to the Entrust CA for "Entrust L1C" to verify the intermediate certificate also isn't revoked. If the web client
is behind a tight firewall that doesn't allow browsing to random Internet IPs for OCSP, the web client is unable to know if the certificate is still valid. The response from the IIS forum http://forums.iis.net/post/2097704.aspx was that
I should post the question here.
How can I configure IIS to send OCSP responses (OCSP stapling) to web clients for the intermediate certificates in its certificate's chain as well? Multiple Certificate Status Request Extension is an Internet standard documented in RFC 6961 at
http://tools.ietf.org/html/rfc6961. Is there a way to configure IIS to do this?

It is working as designed. Currently OCSP Stapling only includes the revocation status for the leaf/server certificate. The assumption is that the offline CA certificates use CRLs, the CRLs are cached and should not need to be included in the stapled responses.
Brian

Multiple PF STATUS

Similar Messages

Maybe you are looking for